ipad broken lcd screen made in china

Since there are some differences in quality between the China-made iPhone screens and original iPhone screens, so you need to be careful when handling the new iPhone screen replacement, according to our test, the top corner of the screen is one of the key parts that should be gently treated. Don’t push these 2 corners with force when reassemble the phone.

After installing front camera and ear speaker, you’ll need to hold them with the metal bracket, there is another point you need to be carefully dealing with, please note that all the screws have unique positions, don’t mix them with wrong position, and what needs to be paid more attention to is the rightmost one with a red circle showed below, do not twist this screw too tight, or which can somehow cause the screen cracked after reassembling the screen.

After connecting the screen connectors, then you may need to test the screen functionality before totally installed. You’d better make the angle between the screen and body is less than 45 degree during the screen test. With screen test finished, then the last step, make sure the screen replacement is properly aligned with the housing edge.

The rumor that the China made iPhone LCDs can’t survive the upcoming iOS updates existed for quite a long time which aroused panic among repair shops. Many repair shops who want to use/have already used these screens to compete with authorized repair are wondering, will Apple brick these iPhone to kill the third party repair? We ETrade Supply don’t think so and here is why:

Do you still remember that users sued Apple for bricked iPhone due to "error 53"? The situation is almost the same except only few people have let their home button be replaced by third party repair shops. How many China made iPhone LCDs have been sold? We don’t have the exact number. However, from what we know, the number should be over 1 million pieces at least. Will Apple brick millions of iPhones just to kill third party repairs?

Same rumors for the 4/4S screen before. The OEM LCDs for 4/4s died out for quite a long time, all screens supplied were China copy one since 2 years ago. Not a case of bricked phone/unusable have showed for the updating to the new iOS system.

The most possible reason that this rumor has been created—is just to cut the price of the China copy iPhone LCD and more possibly-- the demand for it.

A week before the Apple event in March 2016, the rumor was “China made iPhone LCDs can’t survive in the coming iOS 9.3 updates”, the price of these LCDs dropped significantly and everyone was holding their orders, waiting to see the result. Within one week, the price has dropped around $10/pc. After people found out that they did survive, the price increased again and here came the rumor “the China made iPhone LCDs won’t survive the iOS 10 updates”.

Since last June, more and more repair shops have accepted the China made iPhone LCDs because less OEM screens are supplied. A large certain amount of demand of OEM iPhone screens has been moved the China made ones. The rumor that “the China made iPhone LCDs won’t survive the newest iOS updates” will sure bring some demand back to those crappy OEM screen which have been used for quite a long time/ refurbished for multiple times.

The rumor is “ALL the China made iPhone LCDs won’t survive the iOS 10 updates”, not only for 5 series. As we all know, there are already China Made 6 screens in the market. Those who stocked large amount OEM 6 screens will be happy to see people still paying high price for the OEM 6 screens for quite a long time.

The supply chain of cell phone replacement parts is sophisticated, unclear and without any standards, which make it look more like gambling. Find a reliable long-term relationship partner who can grow with you is the key to success for repair shops. If you have any questions regarding the China made LCDs, please leave your comment below!

Well, its basically a game of you get what you pay for when it comes to part replacements. Your competition might be getting these screen replacements for less, but that doesn’t mean those replacement screens are good quality. Cheap replacement parts are usually “too good to be true” and fail within a few months to a year.

I would not want your customers coming back to you angry because their screen stopped working again or broke from a very small tumble soon after replacement, and neither would you want this to happen. If you have more happy customers then your competition, you’re doing well in my book.

Since the iPhone 7/7 Plus has been released for quite a long time, finally the China made iPhone 7/7 Plus screen replacementscame out in the market. we’ve got some iPhone 7 series LCD screen replacements samples and done some tests on them, now let’s take a closer look at these new iPhone 7 series LCD screen replacements!(TianmaandLGsources for testing)

After installing all the sample screens to the iPhone 7/7 Plus rear housing assembly, we found that all the China made iPhone 7 series screen replacements are fitting well just like the original ones - the home button fits well, the screen assembly and the rear housing also fits well.

From the picture below, we can see that there is no difference between the China made iPhone 7 series display and the original ones, however, back to the rear side, we can easily figure out which one is which, cause the original one has Apple logo on it while the China made screen has none.

By comparing these two iPhone 7 screens, we can find that the screen flex cables are much different, there are extra IC on the China-Made iPhone 7 screen while the original one has none. And the original iPhone 7 series screen flex cable is integrated together while on the China-Made iPhone 7 series screen the touch function flex cable is soldered to the display and 3D touch flex cable.

Another difference between the original and China made iPhone 7 screen replacements is the exposed IC on the after-market iPhone screen, just like other China-Made iPhone 5 or 6 series screen replacement, which has more potential risk of electrostatic damage and more likely to get damaged and this problem needs to be improved.

During our test, we found that the display color between our after-market iPhone 7 screen and original screen seems a little different although they are not effecting the touch function. And to be honest, there may have some black dots on the screen because of impurities within the screen module when laminating the LCD and backlight together, without any doubt, this can be solved with technical improvement.

The screen touch sensitivity is another big concern for all of us, luckily, during our test, almost all home button and touch functionality on both iPhone 7 and 7 Plus works well, except one piece of iPhone 7, the 3D touch function is not acting so well on the central part of the screen.

The China-Made iPhone 7 series LCD screen assembly replacement still remains to be improved in quality and performance compared to the original ones, the exposed IC, heavier screen flex cable ribbon, and the screen color difference, the touch function stability, although the price is attractive. However, the China made iPhone 7 series screen replacement is under the improvement, and sooner or later their quality and performance can be quite close to original ones and acceptable, if you"re going to stock up some non-original iPhone 7 series LCD screen replacement, pay more attention and we’ll keep you updated with further information about after-market iPhone 7 series screen replacement!

We can service the battery in your iPad or Apple Pencil for a service fee. Our warranty doesn’t cover batteries that wear down from normal use. We"ll test your iPad to see if it has a battery issue or a different power issue.

The AppleCare Protection Plan gives you expert technical support and additional hardware service options up to two years from the day you bought your iPad. You can buy the AppleCare Protection Plan within one year of buying your iPad.

The Apple Limited Warranty covers your iPad and the Apple-branded accessories that come in the box with your product against manufacturing issues for one year from the date you bought them. Apple-branded accessories purchased separately are covered by the Apple Limited Warranty for Accessories. This includes the Apple Pencil, spare cables, wireless chargers, or smart keyboards.

“Original” screens are those containing LCDs manufactured for Apple. “Copy” screens are compatible replacements entirely designed and manufactured by third-party companies not associated with Apple.

LCD display panel can have poorer resolution (i.e. looks “coarser”), worse brightness, contrast and vibrancy and reduced refresh rate amongst other problems.

Changes in specification from original can result in battery and performance issues. Certain badly-engineered screens could even damage the backlight circuitry.

Customers who bring their iPhones to us for a screen repair are offered two choices of replacement- an original or a “copy” screen. The most common response is “Is there a difference- and which one would you recommend?”

Originals are those screens containing LCDs that were manufactured for Apple. So-called “copy” screens are compatible replacements, but designed and manufactured entirely independently by third-party companies, typically in China.

Our answer is simple- the original screen is the one we’d go for ourselves, every time. Some people think we make more money on them, but this isn’t the case. We recommend originals because they’re far higher quality and the price difference is fairly small.

We’d rather only fit original screens. The only reason we don’t is that many people will shop around and choose purely on price. As such, we need to offer the cheaper copy screens to remain competitive and avoid losing these customers. In some cases, they didn’t even know there was a difference in the first place- especially since it’s not in some shops’ interest to draw people’s attention to the issue!

This may well be the worst copy screen we’ve ever come across. As a result, the unfortunate customer has ended up paying twice to have their screen replaced- we’re sure that had they been properly informed, they would have chosen an original in the first place.

While the difference in price between copies and originals can vary across devices, it’s generally around £10 – £14 extra to have an original screen fitted. This really isn’t a lot considering the improved quality and reliability.

We compare our prices to our competitors- and we know that we come out of it favourably. While we have to offer copy screens to remain competitive, we always advise customers to go for the original.

When you’ve spent- directly or indirectly- several hundred pounds for an iPhone with a Retina display, it doesn’t make sense to replace it with a lower-quality screen that can make a £400 phone look like a £40 one! Not only that, but you’re likely to have fewer issues, and a longer-lasting screen.

Many- if not most- don’t even acknowledge the existence of copy screens, let alone explain the difference to the customer. Hardly in their interest to do so if they only fit cheap, low-quality copies. Some of them can hardly be blamed- they know so little, they’re not even clear on the differences between OEM, non-OEM and copy displays themselves! Others can be more deliberately misleading… and some outright lie.

Generally, these shops are looking for the cheapest price on replacement screens.. When offered a copy at a half or a third of a price of the original, they’re going to go for that. That might be fine if they offered the customer a cheaper price- what we disagree with is selling “supermarket beans” (i.e. the copy screens) at “Heinz beans” prices!

Heading towards the “blatantly fraudulent”, we’re aware of companies that shamelessly fit copy screens while claiming them to be original. Worse, they’ll take your broken original screen and sell that to a recycler for more than they paid for your copy!

Apple tightened up their supply chain around 2015, which reduced the number of screens available for repairs and increased their price dramatically. A lot of companies went bankrupt, and Chinese manufacturers responded by making their own “copy” screens from scratch. At first, these weren’t much cheaper than the Apple ones, but the price soon fell.

We should be clear that- despite the name- “copy” screens aren’t direct copies of the Apple originals. Rather, they’re compatible replacements that have been designed from scratch and- as a result- vary in some respects that have an effect on usability and quality.

One of the most important differences between an original and a “copy” screen is how the digitizer (touch sensor) is designed. Apple has it manufactured as part of the LCD itself, whereas the copies have it on the glass.

Although there are only a small number of manufacturers of the bare LCDs themselves, these are then bought by countless other companies who add the remaining components needed to turn these into a complete working screen. As a result, you could easily end up with an LCD from the best “copy” manufacturer, but the digitizer/touch (as part of the separately-manufactured glass) from the worst.

There are countless digitizers out there, and you can only take the supplier’s word that the quality is good. Many ship good ones at first, then switch to cheaper parts to make more profit. This is particularly bad with the iPhone 6S and 6S+, since Apple moved the chips responsible for touch processing onto the LCD itself. As a result, you’re not just getting a copy screen- you’re getting copy chips too.

The performance specification (power drain, etc.) of most copy screens isn’t identical to the originals. As a result, they can drain the battery more quickly and mislead the operating system which was optimised for the original screen design.

It’s even possible that this mismatch could damage your backlight. We do a lot of subcontracted repairs for less-experienced shops, and get backlight repairs in almost every day. We’ve had cases where we fixed the circuit, fitted the new copy screen to test it, and had it break the circuit again!

Copy screens can disrupt the touch ID fingerprint reader. With the 6S, 6S+, 7 and 7+, the home button- part of the 3D touch- is part of the screen assembly. Frequently the home button flexes on aftermarket designs don’t work properly and stop the touch ID working- annoying if you use it to unlock the phone or log in to your bank.

We’ve seen many lift away from the frame that holds them in place. This usually results in the flex cable getting torn, and the screen needing replacing. You don’t even need to have dropped the phone- this often happens through general everyday wear and tear.

That brings us to another major issue with the copies. When you drop an Apple original, the glass often breaks, but if the LCD itself is intact, you can continue to use it until it’s fixed. With the copies, the touch/digitizer is on the glass and stops working when that’s broken. Even worse, the LCD itself is more likely to break due to the thinner and more fragile glass.

We’re not convinced this will happen, since Apple recently changed their repair policy to accept iPhones with third-party screens. However, it is possible that copy screens could be stopped from working via an iOS update, since those make a number of security checks.

Breaking news coming from the electronics aftermarket industry hub in China, the first Chinese iPhone 7 Plus LCD replacement sample is finally here... Since LCD screen is the most important replacement part in Apple iPhone screen repair business, REWA tested the sample at once. All the test procedures were analyzed in detail with opinions proposed. Now, let"s take a close look at first China-made iPhone 7 Plus LCD Screen sample with professional testing report below.

Display color is good, color temperature is relatively higher than OEM. ( tested on the home screen, white image, grey image, left screen is OEM, right screen is China made )

To analyze inside layers of the iPhone screen, we tear it down layer by layer. The sample China made screen applies G + G layer structure, there is a glass base touch layer, this also explains the thickness of the China Made iPhone 7 Plus LCD Screen sample.

The quality and performance is quite close to OEM and acceptable, and sure it will come with an impressive lower price offer. The display panel is China made with G + G layer structure, and the screen is assembled with a third-party driver IC solution. That is the information for the first China Made iPhone 7 Plus LCD Screen and please stay in the loop with future market insider updates by REWA .

Based on the different level demands from iPhone repair shops to carrier level refurbishing factories, we released THREE independent solutions: Primary, Economical and Professional which cover the complete processes of broken screen recovery. To offer a hassle-free one-stop service, we have prepared detailed demo videos, on-site training, online technical support as well as a full list of qualified parts and materials. You can also check our other REWA Screen Repair training:

Apple is always looking to diversify its suppliers; this helps to improve existing technologies and make them less expensive. This time, TCL’s subsidiary CSOT wants to enter Apple’s LCD supply chain for upcoming Macs and iPads.

The publication says that CSOT is a “fierce competitor” to BOE in the global LCD market, but the company is ahead of CSOT in LCD panels for notebooks, tablets, and monitors as well as with the OLED technology for smartphones.

BOE, as you probably know, has for years been a third supplier of displays for Apple’s older LCD iPhones, but only started making OLED panels for Apple as of the iPhone 12. It was on track to pick up orders for 30-40M iPhones this year. It will also be responsible for around five million units of iPhone 14 OLED panels.

Not only that, but BOE is also supplying LCD panels to Apple for MacBooks and iPads. Analyst firm Omdia says the Chinese company will be the largest supplier of LCD panels for iPad this year.

CSOT also formed a team during the first half of the year to review building an OLED production line aimed at iPhones. CSOT’s expansion plan will, besides BOE, also threaten South Korean display maker LG Display, which leads the supply of LCD panels to Apple for high-end devices.

LG Display is expected to supply 14.8 million LCD panels to Apple for MacBooks this year, according to Omdia, making its share in this specific supply chain 55%. Having another competitor in the supply chain like CSOT could add pressure on LG Display to cut unit prices.

Not too long ago, we’ve just got some samples of the new China Made iPhone 6 LCD Display. No doubt that this will be another option for all who are suffering from the high price of the iPhone screens. Let’s take a deep look of these screens.

At the moment, there are two companies producing theiPhone 6 LCD screens, one is LT, the other one is JDF (no iPhone 6 screens made by TM are available now). Below are some detailed comparisons after our tests.

When taking a closer look at both of the LT and JDF iPhone 6 screens under direct light, you’ll see the digitizer textures. While for the original screen, the textures had been hidden by a special painted layer.

The glass lens of LT made iPhone 6 screen is far too thin compared with the original one, which can’t secure the display well. At the same time, thinner glass lens will make the home button stick up above the screen. While for the JDF made screen, a plastic layer has been added to make it thicker.

It’s hard to be realized through eyes, but it’s easily to be touched. When you grab the iPhone 6 with LT made screen, it’s hard to ignore that annoying uncomfortable feeling. At this point, the JDF made screen is much better.

High and low temperature tests have been applied to both the LT and JDF iPhone 6 screens. Both of them have survived and worked well after been putted in a 55 centi degrees room for 2 hours and -5 centi degrees room for 2 hours.

Through our tests, the first version of both the LT and JDF displays are not good choices for the repair industry. The obvious color differences, thickness differences still need to be improved. If you have any questions regarding the LT/JDF iPhone 6 screens, please leave your comment below, we’ll try our best to answer it.

LCD Screen and Digitizer Assembly Replacement (Made by China Manufacturer, Brighter/Lumen) + Disassemble Repair Opening Tool Set for iPhone 6s 4.7 inch - White

For the perfect birth of a lcd xiaomi , flexible and multiple high-quality raw materials are needed. Explained as substances used in the primary production of goods, they are often altered for use in various processes prior to being used in the manufacturing process. Sometimes, inevitable chemical reactions between different raw materials with various chemicals included may occur. This requires the workers of the manufacturing company to be equipped with proficient skills and the abilities to tackle emergencies. After years of development, Kimeery (HK) Industrial Limited has become a well-known brand in China"s Digitizer industry. Kimeery focuses on providing a variety of oled screen replacement for customers. Regarding the quality management of Kimeery lcd xiaomi , various quality inspection systems are conducted. It must be scrutinized to check its sealing quality and whether it has any air leakage problem. It"s not likely to suffer from the burn-in problem. Outstanding mechanical properties of this product is known. With remarkable loading strength and overpressure withstanding ability, it can endure daily heavy use. The product has the advantage of fingerprint resistance performance.Our company has a mission of Always Advancing to Protect What"s Important and is committed to building a more sustainable future. Our No. 1 priority is safety and with continuous improvement in our safety practices, we have reduced the incident rate far below the industry average.

We mainly provide iPhone, iPad, Samsung, etc famous brand parts, covering the LCD displays, touch screen digitizers, glass lenses, back cover, flex cable, vibrator, speaker, back and front cameras, accessories, etc.