kedei 3.5 inch spi tft lcd version 3 brands

While googling for any info about lcd controller I came across this page: http://heikki.virekunnas.fi/2015/raspberry-pi-tft/, author managed to get from manufacturer patch file for kernel sources and tested it with 4.1.y - on which lcd worked. But still LCD replace HDMI, but I want to use this screen as additional for user interaction, while the bigger on HDMI as presentation monitor.

I have looked through files that he (author of page `heikki.virekunnas.fi`) published, and I came to conclusion that the patch do not changes standard ILI9341 driver but only replace default framebuffer and directs it to ili driver while cutting out hdmi, only single mention in patch file about ili9341 is adding it"s .ko file to $obj in makefile... wow I"m so smart

Since, fbtft has been merged with rpi kernel, so the fb drivers (including ili9341.c) was moved to fbtft_device driver (so the author of page can"t compile latest kernel with driver+patch).

So something about hardware, which I reverse engineered by the "hard way" - "grab multimeter and run through all LCD FPC pins and shift register pins"

Now I noticed there is "9486L" which can suggest that LCD screen is controlled by ILI9486L, I found this LCD on taobao too but I can"t contact seller.

I"m pretty sure about D/C (Pin 37 on LCD) and Reset (Pin 19 on LCD) pins by looking into driver code, but I can"t identify other signals (WR/RD/CS/etc...)

[ 0.000000] Linux version 3.18.9-v7 (lgh@lgh-ThinkPad-X200) (gcc version 4.7.1 20120402 (prerelease) (crosstool-NG 1.15.2) ) #7 SMP PREEMPT Sun Jun 28 09:33:18 CST 2015

[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa01041 bcm2709.serial=0x2938b030 smsc95xx.macaddr=B8:27:EB:38:B0:30 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait

[ 4.838806] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:24AE:1000.0001/input/input1

[ 4.862704] hid-generic 0003:24AE:1000.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-bcm2708_usb-1.3/input0

[ 4.902783] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:24AE:1000.0002/input/input2

[ 4.926400] hid-generic 0003:24AE:1000.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-bcm2708_usb-1.3/input1

- Controller is not ILI9341/ILI9325 - those are for smaller displays (320x240, etc...), I guess this might be ILI9486/9488 because they are for 480x320 displays. But when I compared init with DS it does not fit right so LCD can have a clone of ILI9486/9488 ...

- Module use only SPI interface and two CE signals (CE0 for touch controller, CE1 for LCD shift registers - compared to others lcd modules, in KeDei module this is swapped),

So I just purchased a KeDei 3.5" TFT Display (v6.3) for my Raspberry Pi 3, and I have found out that the display only works with premade Raspbian / Ubuntu / Kali images. This wouldn"t be a problem, but those modified images don"t seem to work with HDMI. What I want is to be able to use HDMI with my TV/Monitor, and when I take my Pi to go, I"d like to just be able to plug the display into the Pi. I installed the drivers on Raspbian Pixel, when booting up the Pi with the KeDei display after installing the drivers, it just froze on the console. I plugged in an HDMI monitor (while the display was still plugged in) and rebooted my Pi, and it went past the console and booted to the Desktop on the HDMI monitor, but not on the LCD Display.

... height with supports. ...This bracket will accommodate the Kedei 3.5" HDMI LCD screen, using kapakahi"s screw posts. The button wells from kapakahi"s original Thing will also fit. ...

Remix Raspberry Pi Display Case http://www.thingiverse.com/thing:1229473 For the KeDei 3.5" SPI TFTLCD 480x320 version 1.1 2015/8/11 Print Settings Printer Brand: RepRap Printer: reprap prusa i3 marlin Rafts: Doesn"t Matter Supports: No Resolution:...

So I ordered the OSOYOO 3.5" TFT display from Amazon (also seen it for sale as a KeDei display which is what is actually printed on the OSOYOO I received from Amazon), and I wanted a simple case for it that would hold & display it nicely with all...

... stl orientation- screen.stl should be printed downwards. -So the supports go on top of the mounting screws. Screen has some freedom of movement on the back of the pi, just dab som hotglue to the edge of the kedei-pcb and have a good time! ...

I love the case made by 0110-M-P and I couldn"t find a good case for cheap 3.5 kedei LCD so I made a top for 0110-M-P base. I"m using this with my octoprint and touch UI.

My touchscreen (KeDei (ebay)) was a bit higher to fit the original case so I made the display-slot slightly taller for the case and cap. ...Works with the following Raspberry Pi Models:

A Gameboy Zero Helper for the Kedei 3,5 " Display Space for micro usb break out, usb and volume wheel the top adds more useable space into your build print solid and drill the holes by your self

Screen used is KeDei 3.5 inch LCD TFT 320x480 touch screen (sample link https://www.aliexpress.com/item/New-Original-3-5-Inch-LCD-TFT-Touch-Screen-Display-for-Raspberry-Pi-2-Raspberry-Pi/32851565266.html). ... You will need: - The screen (KeDei 3.5 inch...

I have the KEDEI 3.5" 128M SPI TFT screen, and had to modify it slightly: "extending the connector with wires", which gives the opportunity to add some more things like better power connection or i2c RTC. I made the case for the screen to cover the...

... On an ugly reprap display I also deliberately omitted, since I use octoprint touch (with a osoyoo / kedei 3.5 "HDMI touch TFT https://amzn.to/2IivrUA). ...

I had in plans to create a custom driver but I decided this is not worth my time. I"m going to "re-interface" this lcd to be supported by fbtft. I have a prototype pcb with fbtft-spi interface ready (I have to send this project to pcb prototype service).

Unfortunatly, because of my "spider-circuit" I"ve broken my lcd (I"ve made a some short