pixel lcd module quotation

Innovative ultra-wide, sunlight readable TFT LCD. The wide stretch display fits applications in digital signage, public transportation, department store merchandizing, vending machines and industrial applications. Pixel Scientific™ designs and supplies custom AMLCDs in support of unique applications. Our technology makes possible small to medium production volume of fully-custom-sized AMLCDs.

Color LCD module PS302-04043-00 is composed of the amorphous silicon thin film transistor liquid crystal display (a-Si TFT LCD) panel structure with driver LSIs for driving the TFT (Thin Film Transistor) array and a dual mode backlight. The a-Si TFT LCD panel structure is injected liquid crystal material into a narrow gap between the TFT array glass substrate and a color-filter glass substrate. Color (Red, Green, Blue) data signals from a host system (e.g. signal generator, etc.) are modulated into best form for active matrix system by a signal processing board, and sent to the driver LSIs which drive the individual TFT arrays. The TFT array as an electro-optical switch regulates the amount of transmitted light from the backlight assembly, when it is controlled by data signals. Color images are created by regulating the amount of transmitted light through the TFT array of red, green and blue dots.

NHD-12864WG-BTGH-T#N | Monochrome Graphic Module | 128x64 Pixels | Transflective LCD | Side White Backlight | STN (+) Positive Gray Display | Built-in Temperature Compensation Circuit | Negative Voltage

Newhaven 128x64 graphic Liquid Crystal Display module shows blue pixels on a gray background. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-12864WG-BTGH-T#N display has a built-in temperature compensation circuit and negative voltage. It has an optimal view of 6:00, operates at 5V supply voltage and is RoHS compliant.

NHD-19232WG-BGGH-V#T | Monochrome Graphic Module | 192x32 Pixels | Transflective LCD | Green Backlight | STN (+) Positive Gray Display | Built-in Positive Voltage | Non-Stocked

Newhaven 192x32 graphic Liquid Crystal Display module shows dark pixels on a bright green background. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-19232WG-BGGH-V#T display includes built-in positive voltage. It has an optimal view of 6:00, operates at 5V supply voltage and is RoHS compliant.

LCD Graphic Display Module Specifications and Part Numbering MethodologyOverall Module Size180.0 (W) x 65.0 (H) x 10.5 mm (D) - No Backlight or El Backlight

The 64128N uses our 64128K LCD module which has a viewing area of 50 x 25 mm and the ST7565R COG IC. The backlight uses a single LED for low power consumption.The PCB allows for easy mounting and assembly.

The ST7565R is a single-chip dot matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or 4-line SPI display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor. Because the chips in the ST7565R contain 65x132 bits of display data RAM and there is a 1-to-1 correspondence between the LCD panel pixels and the internal RAM bits, these chips enable displays with a high degree of freedom. The ST7565R chips contain 65 common output circuits and 132 segment output circuits, so that a single chip can drive a 65x132 dot display (capable of displaying 8 columns x4 rows of a 16x16 dot kanji font).

The most common LED tickers are 16, 32, 48, or 64 pixels in height. What dictates the character height is the spacing between the pixels. If the pixel spacing is 6mm that translates to 4.6” (16 pixels), 8.4” (32 pixels), 12.1” (48 pixels), and 16.3” (64 pixels). If the pixel spacing is 4mm the heights are 5.8” (32 pixels), 8.3” (48 pixels), and 10.9” (64 pixels).More specs available here.

A typical LED ticker board starts at 48” in length with standard module lengths at 15.2” wide and can be built as long as required. For custom applications, we can use a half module allowing us increments of 7.6”. Get more detailed specs on ourticker product page.

With a cableless connection for rapid-installation, the Hyper Pixel 2.9mm display features high resolution images, industry-leading service design, and ultra-tight seams to create the ultimate visual experience.

Innovation design-cableless connector: Hyper Pixel is the fastest industry-wide in terms of installation and dismantle, featuring a 50％ less time than industry average with its patented connector design.

User-friendly LED information window: LCD window able to real-time display operating condition (voltage, operating item, screen temperature), built-out test key to detect the illumination of the display screen

The liquid crystal display (LCD) technology has been used in several electronic products over the years. There are more reasons for LCDs to be more endearing than CRTs.

The DBI1901MP is a 1.3 mega-pixel, 19″ high bright monochrome LCD. It provides a pre-calibrated 10-bit DICOM LUT. The DBI1901MP delivers luminance of 1000cd/m² a contrast ratio of 700:1 for exceptional image quality in a variety of user environments

Our 1 MP DBIMX10p monitor has advanced image processing for modality imaging. Our motion adaptive technology allows for the splitting or de-interlacing of the image to eliminate the blurriness or jaggy-edged images associated with other lower-quality displays. Using spatial noise reduction, our 1 MP Monochrome LCD monitor responds quickly to "real-time" procedures.

The bright 19-inch monochrome LCD monitor delivers a luminance of 1000 cd/m² along with a contrast ratio of 1000:1. This provides superior image quality, with every detail illuminated on this Monochrome LCD display regardless of user environment.

We back our product with a 3-year warranty should something go wrong, and we provide 24/7 support for any questions or issues you may have using our display. We also offer an optional protective glass feature or other mounting options as well, so be sure to check with us for the device that suits your medical facility and improves your Monochrome LCD display.

Looking for a specific TFT resolution? We offer LCD TFTs varying in resolution from 128x160 pixels to 800x480 pixels. Many of our TFT LCDs also have carrier boards to make integrating them into your product as simple as possible. All of our TFT LCDs offer full color RGB. If you"re not finding the correct TFT LCD for your product or project, please contact our support team to see if they can help you find an appropriate TFT display module for you.

1) Q: Are you a factory or trading company?A:We are a OEM/ODM factory. manufacturers of LCD products supporting China and the global.2) Q:What payment methods your company accept?A:We accept most of the payment methods,but mainly accept T/T,L/C,Western Union,Paypal or Alibaba Assurance Payment.3) Q:How long is the warranty time for your products?A:1 year full warranty is quoted normally. But customer can choose to extend warranty to 2 years, 3 years.

The 84 x 168-pixel portable LED video display is custom-designed by Lynx to meet the demands of every competition level, from small high school meets to WA championships. The display is portable, weather-proof, and integrates seamlessly with FinishLynx technology to display live results at your finish. The LED panel measures 100cm x 50cm (19.68” x 39.5”) and displays high-visibility text, images, results, and animated graphics for superior fan engagement. Plus, the 6mm pixel pitch and 5000 nits of brightness ensure that your live race results are visible in both indoor and outdoor venues.

The display receives data through a standard HDMI connection and is compatible with any software capable of sending graphics to an HDMI-connected display. Place it at the finish line and connect to ResulTV to output race results and broadcast-ready graphics, or send live results and images directly from FinishLynx cameras using the Video Display Module (VDM).

The portable 84 x 168-pixel finish line display can connect directly to EtherLynx Vision series photo-finish cameras running the Video Display Module to display live finish times, results, custom text, and even FinishLynx results images directly from the camera’s HDMI output. The VDM option uses custom scoreboard scripts to output live race data and the options can be controlled from inside the FinishLynx software interface. Select capture images, send custom messages, or edit the display layout with a click of the mouse.

The backlight emits white light, through the polarizer for the initial handsome selection of light, through the glass plate to reach the liquid crystal control circuit, light through the liquid crystal gap, the external voltage applied to the liquid crystal, will change the angle of light deflection, light in the glass plate, through the polarizer, and finally projected on the red, green and blue polarizer, showing different colors, and finally formed a display unit, called pixel points

LCD itself does not emit light, the backlight is required to provide a light source, light through a series of processing to the output, the output light intensity is much lower than the intensity of the light source, the energy utilization rate is lower, (energy-saving than CRT displays), LCD processing, will lead to a narrower display direction, corresponding to its perspective is smaller, from the side of the screen will not be able to see his display content, color conversion, liquid crystal molecules also need to consume a certain amount of time to rotate, resulting in a low response speed of the screen

Larger screen for outdoor use, using LED dot matrix color display, each pixel, containing red, green and blue LED lights, display principle similar to the LED color lights on the experimental board

OLED display and LED dot true color display principle is similar, because it uses the pixel unit is “Organic Light Emitting Diode (Organic Light EmitTIng Diode)” pixel density is much higher than the ordinary LED dot matrix display

Pixel: The most basic display unit element of the image, the display pixel refers to the smallest point of his imaging Embedded devices, the display is described as “row pixel value * column pixel value” The color reference color on the display, red, green and blue RGB888 indicates that the color is expressed using 8bit RGB565, corresponding to red 5bit, green 6bit, blue 5bit Color depth indicates the number of bits corresponding to each pixel 16bit or 24bit, 24bit is sufficient for regular use

Each pixel in the LCD screen is data, in practice, it is necessary to cache the data of each pixel and then transfer it to the LCD screen, this way of storing display data is called memory.

The display resolution or display modes of a digital television, computer monitor or display device is the number of distinct pixels in each dimension that can be displayed. It can be an ambiguous term especially as the displayed resolution is controlled by different factors in cathode ray tube (CRT) displays, flat-panel displays (including liquid-crystal displays) and projection displays using fixed picture-element (pixel) arrays.

It is usually quoted as width × height, with the units in pixels: for example, 1024 × 768 means the width is 1024 pixels and the height is 768 pixels. This example would normally be spoken as "ten twenty-four by seven sixty-eight" or "ten twenty-four by seven six eight".

One use of the term display resolution applies to fixed-pixel-array displays such as plasma display panels (PDP), liquid-crystal displays (LCD), Digital Light Processing (DLP) projectors, OLED displays, and similar technologies, and is simply the physical number of columns and rows of pixels creating the display (e.g. 1920 × 1080). A consequence of having a fixed-grid display is that, for multi-format video inputs, all displays need a "scaling engine" (a digital video processor that includes a memory array) to match the incoming picture format to the display.

For device displays such as phones, tablets, monitors and televisions, the use of the term display resolution as defined above is a misnomer, though common. The term display resolution is usually used to mean pixel dimensions, the maximum number of pixels in each dimension (e.g. 1920 × 1080), which does not tell anything about the pixel density of the display on which the image is actually formed: resolution properly refers to the pixel density, the number of pixels per unit distance or area, not the total number of pixels. In digital measurement, the display resolution would be given in pixels per inch (PPI). In analog measurement, if the screen is 10 inches high, then the horizontal resolution is measured across a square 10 inches wide.NTSC TVs can typically display about 340 lines of "per picture height" horizontal resolution from over-the-air sources, which is equivalent to about 440 total lines of actual picture information from left edge to right edge.

Some commentators also use display resolution to indicate a range of input formats that the display"s input electronics will accept and often include formats greater than the screen"s native grid size even though they have to be down-scaled to match the screen"s parameters (e.g. accepting a 1920 × 1080 input on a display with a native 1366 × 768 pixel array). In the case of television inputs, many manufacturers will take the input and zoom it out to "overscan" the display by as much as 5% so input resolution is not necessarily display resolution.

The eye"s perception of display resolution can be affected by a number of factors – see image resolution and optical resolution. One factor is the display screen"s rectangular shape, which is expressed as the ratio of the physical picture width to the physical picture height. This is known as the aspect ratio. A screen"s physical aspect ratio and the individual pixels" aspect ratio may not necessarily be the same. An array of 1280 × 720 on a 16:9 display has square pixels, but an array of 1024 × 768 on a 16:9 display has oblong pixels.

An example of pixel shape affecting "resolution" or perceived sharpness: displaying more information in a smaller area using a higher resolution makes the image much clearer or "sharper". However, most recent screen technologies are fixed at a certain resolution; making the resolution lower on these kinds of screens will greatly decrease sharpness, as an interpolation process is used to "fix" the non-native resolution input into the display"s native resolution output.

Most television display manufacturers "overscan" the pictures on their displays (CRTs and PDPs, LCDs etc.), so that the effective on-screen picture may be reduced from 720 × 576 (480) to 680 × 550 (450), for example. The size of the invisible area somewhat depends on the display device. Some HD televisions do this as well, to a similar extent.

Many personal computers introduced in the late 1970s and the 1980s were designed to use television receivers as their display devices, making the resolutions dependent on the television standards in use, including PAL and NTSC. Picture sizes were usually limited to ensure the visibility of all the pixels in the major television standards and the broad range of television sets with varying amounts of over scan. The actual drawable picture area was, therefore, somewhat smaller than the whole screen, and was usually surrounded by a static-colored border (see image to right). Also, the interlace scanning was usually omitted in order to provide more stability to the picture, effectively halving the vertical resolution in progress. 160 × 200, 320 × 200 and 640 × 200 on NTSC were relatively common resolutions in the era (224, 240 or 256 scanlines were also common). In the IBM PC world, these resolutions came to be used by 16-color EGA video cards.

One of the drawbacks of using a classic television is that the computer display resolution is higher than the television could decode. Chroma resolution for NTSC/PAL televisions are bandwidth-limited to a maximum 1.5MHz, or approximately 160 pixels wide, which led to blurring of the color for 320- or 640-wide signals, and made text difficult to read (see example image below). Many users upgraded to higher-quality televisions with S-Video or RGBI inputs that helped eliminate chroma blur and produce more legible displays. The earliest, lowest cost solution to the chroma problem was offered in the Atari 2600 Video Computer System and the Apple II+, both of which offered the option to disable the color and view a legacy black-and-white signal. On the Commodore 64, the GEOS mirrored the Mac OS method of using black-and-white to improve readability.

Programs designed to mimic older hardware such as Atari, Sega, or Nintendo game consoles (emulators) when attached to multiscan CRTs, routinely use much lower resolutions, such as 160 × 200 or 320 × 400 for greater authenticity, though other emulators have taken advantage of pixelation recognition on circle, square, triangle and other geometric features on a lesser resolution for a more scaled vector rendering. Some emulators, at higher resolutions, can even mimic the aperture grille and shadow masks of CRT monitors.

The availability of inexpensive LCD monitors made the 5∶4 aspect ratio resolution of 1280 × 1024 more popular for desktop usage during the first decade of the 21st century. Many computer users including CAD users, graphic artists and video game players ran their computers at 1600 × 1200 resolution (UXGA) or higher such as 2048 × 1536 QXGA if they had the necessary equipment. Other available resolutions included oversize aspects like 1400 × 1050 SXGA+ and wide aspects like 1280 × 800 WXGA, 1440 × 900 WXGA+, 1680 × 1050 WSXGA+, and 1920 × 1200 WUXGA; monitors built to the 720p and 1080p standard were also not unusual among home media and video game players, due to the perfect screen compatibility with movie and video game releases. A new more-than-HD resolution of 2560 × 1600 WQXGA was released in 30-inch LCD monitors in 2007.

In 2010, 27-inch LCD monitors with the 2560 × 1440 resolution were released by multiple manufacturers, and in 2012, Apple introduced a 2880 × 1800 display on the MacBook Pro. Panels for professional environments, such as medical use and air traffic control, support resolutions up to 4096 × 21602048 × 2048 pixels).

When a computer display resolution is set higher than the physical screen resolution (native resolution), some video drivers make the virtual screen scrollable over the physical screen thus realizing a two dimensional virtual desktop with its viewport. Most LCD manufacturers do make note of the panel"s native resolution as working in a non-native resolution on LCDs will result in a poorer image, due to dropping of pixels to make the image fit (when using DVI) or insufficient sampling of the analog signal (when using VGA connector). Few CRT manufacturers will quote the true native resolution, because CRTs are analog in nature and can vary their display from as low as 320 × 200 (emulation of older computers or game consoles) to as high as the internal board will allow, or the image becomes too detailed for the vacuum tube to recreate (i.e., analog blur). Thus, CRTs provide a variability in resolution that fixed resolution LCDs cannot provide.

As far as digital cinematography is concerned, video resolution standards depend first on the frames" aspect ratio in the film stock (which is usually scanned for digital intermediate post-production) and then on the actual points" count. Although there is not a unique set of standardized sizes, it is commonplace within the motion picture industry to refer to "nK" image "quality", where n is a (small, usually even) integer number which translates into a set of actual resolutions, depending on the film format. As a reference consider that, for a 4:3 (around 1.33:1) aspect ratio which a film frame (no matter what is its format) is expected to horizontally fit in, n is the multiplier of 1024 such that the horizontal resolution is exactly 1024•n points.2048 × 1536 pixels, whereas 4K reference resolution is 4096 × 3072 pixels. Nevertheless, 2K may also refer to resolutions like 2048 × 1556 (full-aperture), 2048 × 1152 (HDTV, 16:9 aspect ratio) or 2048 × 872 pixels (Cinemascope, 2.35:1 aspect ratio). It is also worth noting that while a frame resolution may be, for example, 3:2 (720 × 480 NTSC), that is not what you will see on-screen (i.e. 4:3 or 16:9 depending on the intended aspect ratio of the original material).