lcd panel custom housing price

Once it’s recognized that a custom display will be a better design and lead to a lower overall system-level cost it’s time to dive into the actual tooling costs.

There are many factors that go into determining the upfront tooling. There’s also due diligence to be performed prior to making this commitment to ensure that this new custom display supplier will effectively support you over the long term.

Customization can either be semi-custom or fully custom. Semi-custom is where some attributes of a standard product are modified to fit the application. In contrast, fully custom is where the design is started from scratch and each component is designed from the ground up.

Semi-custom is typically the preferred option to start with. And in the case of color TFT, it’s typically the only option, as the TFT panel comes with a significant tooling and minimum order quantity (MOQ) such that the customization costs outweigh the drawbacks of using the closest standard TFT glass platform available.

b) Custom color TFT displays— the bulk of this cost comes from the TFT glass cell at $70K–$200K depending on the type of TFT cell used (standard TN or IPS). The balance of the module is an additional $5,000 – $15,000.

f) Touch panels— resistive touch panels cost approximately $2,500, while capacitive touch panels can range between $4,000 and $10,000. If a standard capacitive touch sensor can be used, and only a custom top surface is customized, the tooling can be reduced to only $1,500.

Now that we’ve reviewed some of the costs associated with custom displays, here are some tips you can use to make sure that you move forward with the right partner that will then support this custom display for the long term.

Many LCD display manufacturers try to accommodate all order volumes they receive. While this allows them to serve a wider range of customers, it makes them less specialized for serving certain types of customers. As a result, your specific production volumes may be prohibitively expensive.

Seek out a display manufacturer who is optimized to handle your specific production needs for LCD displays. This is necessary to get the display for the right cost and the appropriate level of support.

Always start with a semi-custom approach. Use the available standard products to base the new design on, and then keep modifying as needed. This results in the lowest tooling costs and an easier design process. And in the case of color TFT, unless you are developing the next iPhone, design your display based on one of the standard glass platforms readily available. Then from there, redesign the backlight and the mechanical and electrical interface for your specific application.

Behind every great company are happy customers. Find out whether your supplier has them. Make sure that when this experience is handed off from your supplier’s sales and design team, the production team is just as good and accommodating. This can be accomplished through references and audits.

Initiating a successful relationship for a new custom display is all about having an open and transparent relationship with the right partner. And by designing the ideal custom or semi-custom display with this partner, you can ensure you’re getting the best possible solution for your company.

New Vision Display is a custom LCD display manufacturer serving OEMs across diverse markets. One of the things that sets us apart from other LCD screen manufacturers is the diversity of products and customizations we offer. Our LCD portfolio ranges from low-cost monochrome LCDs to high-resolution, high-brightness color TFT LCDs – and pretty much everything in between. We also have extensive experience integrating LCD screen displays into complete assemblies with touch and cover lens.

Sunlight readable, ultra-low power, bistable (“paper-like”) LCDs. Automotive grade, wide operating/storage temperatures, and wide viewing angles. Low tooling costs.

Among the many advantages of working with NVD as your LCD screen manufacturer is the extensive technical expertise of our engineering team. From concept to product, our sales and technical staff provide expert recommendations and attentive support to ensure the right solution for your project.

As a leading LCD panel manufacturer, NVD manufactures custom LCD display solutions for a variety of end-user applications: Medical devices, industrial equipment, household appliances, consumer electronics, and many others. Our state-of-the-art LCD factories are equipped to build custom LCDs for optimal performance in even the most challenging environments. Whether your product will be used in the great outdoors or a hospital operating room, we can build the right custom LCD solution for your needs. Learn more about the markets we serve below.

Custom displays are investments that combine exceptional build quality, brand continuity and product-specific design. The word "custom" doesn’t always mean premium quality at a cost—instead, custom displays can offer premium quality at your cost.

Because each display solution is unique, there is no "typical" pricing for custom displays. This creates a flexible pricing structure which works within a large menu of options. Custom display cost is determined by a combination of the quantity, materials, design, installation and transportation associated with your project. A display manufacturer should speak to open-ended ranges while asking you specific questions to narrow down your project needs in each of these considerations.

There is some structure that can be provided around pricing, at least in terms of setting your budget for the custom display cost. In our experience, we recommend that our customers spend about one turn of their product on their display. This ensures a strong ROI on the display cost. Our project management process ensures that we’re clear about your requirements for your display"s performance your top priorities to form a successful display manufacturing partnership.

By definition, our custom displays are tailored to your brand and your product—no one else"s. This creates the perfect set of circumstances for us to meet your pricing and product-specific considerations in parallel. We consider elements of buyer psychology as we discuss initial concepts, then we design and build your display to best market your product, encourage consumer interaction and to withstand long-term wear and tear.

Tusco custom displays offer both durability and exceptional design. We believe in design engineering and manufacturing that preserves displays’ new-like finish and strength, which saves you time and money in replacement costs. We work hard to leverage our in-house capabilities to stay nimble and responsive to the evolving needs of any project that comes our way and remain true to your creative vision and business objectives.

Custom displays are a smart investment for your brand, although they do require an open discussion of goals and needs. Let’s schedule a discovery call to talk about your next project’s specifications.

Mimo Monitors can create a custom-size LCD monitor to almost any specification. Whether it is a minor modification to an existing design, or by utilizing our extensive experience in the industry, we can almost always build what you need.

What we are going to deliver is an industrial open frame monitor, in other words a “bare bones” display sans housing or bezel. These types of displays are meant for integration into kiosks, equipment, or other enclosures. The major advantage to an open frame monitor is that the external design will not change for some time. Therefore, the enclosure it is built into will not need to change for many years.

Aspect ratio - The ratio of the width of the display to the height. Current televisions are 16:9, Old televisions are 4:3 – 16:9, 16:10 and 4:3 are the most popular. Every other aspect ratio is less popular, but any aspect ratio can be created by resizing a panel.

Viewing Angle - This will depend on the technology of the LCD panel. TN vs. VA vs. IPS. More here (http://www.tnpanel.com/tn-vs-ips-va/) . In general, the better the viewing angle, the more expensive the resulting display. Typical are 150x140, 170x170 and 179x179. Or more commonly wide viewing angle or standard viewing angle.

Brightness or Luminance - It is the level of light emitted by an LCD display monitor. Luminance is reported in nits or cd/m2. They are actually the same thing.  This matters for indoor and outdoor viewing and also if you want to draw people toward the display for advertising. Typical indoor brightness is 150 nits, indoor advertising is 300, bright indoor advertising is 700 and outdoor panels are 1000+

Touch panel - Optional human interface for interactivity. Typical choices are Display Only, Resistive (4 or 5 wire), and Capacitive touch options. Our blog discusses the advantages and disadvantages of capacitive touchscreens. SAW is another touch technology that is becoming less and less common.

To resize a LCD is literally to cut the glass, polarizers, circuits and circuit boards to a new size. Years ago, it was thought impossible to preserve the original performance of a previously manufactured LCD once the glass circuits are cut. However, Litemax has done the impossible, over and over again, becoming the world"s leading pioneer and leader in LCD resizing solutions.

Squarepixel series is designed for high brightness with power efficiency LED backlight. It provides LCD panel with specific aspect ratios and sunlight readable for digital signage, public transportation, exhibition hall, department store, and the vending machines.

The spirit of Durapixel indeed lies with its name: durability. Why Durapixel? Commercial-grade LCD displays, due to the competitive pricing structure, are unable to offer more than MTBF of 30,000 hours, which will not be sufficient for any applications that require around-the-clock operations. System designers, integrators and users serious about rugged, industrial displays for demanding environments need to look no further – the unfailingly robust and high-quality Durapixel is the key to each of your success.

UbiPixel, industrial LCDs are used in many professional applications. High bright sunlight readable and low power consumption display technologies offer the highest quality LCDs for specific industrial applications. Our embedded LCD can be manufactured in an open frame, VESA mount, or fully enclosed housing for HMI display, KIOSK, Vending machine, home automation, point-of-sale terminals, digital signage and more. UbiPixel, industrial LCDs are used in many professional applications. High bright sunlight readable and low power consumption display technologies offer the highest quality LCD screen for specific industrial applications. Our embedded LCD can be manufactured in an open frame, VESA mount or fully enclosed housing for HMI display, KIOSK, Vending machine, home automation, point-of-sale terminals, digital signage and more.

Featuring a modular designed, this series can be fitted with a number of modules to expand its base capabilities. On-site maintenance and future upgradability are easier than ever by deploying our panel PCs and monitors.

Litemax rugged panel PCs go beyond that of the standard industrial panel computes with elegant, full IP68/65-rated construction, powerful performance and flexible mounting options making it ideal for harsh environments and demanding applications, such as machine controller, command centers, and fast, efficient computing.

The Litemax ITRP series is fanless Passenger Information System, It features stretched LCD display, with high brightness to ensure easy readability even in light-insufficient environments. It serves as a reliable platform to provide passenger information on wide versatility of vehicles, such as bus and trams.

Intel® offers the Intel® Smart Display Module (Intel® SDM) specification and reference design that can be integrated into the sleekest all-in-one designs. Intel® SDM delivers the same level of intelligence and interoperability as the Open Pluggable Specification, but in our smallest form factor yet eliminates the housing and advances the thinnest integrated displays.

The new Intel® Smart Kiosk Module (Intel® SKM) is a revolutionary solution that makes it easier to scale and maintain interactive kiosks, which are increasingly being used by businesses and governments worldwide to offer customers around-the-clock access to information and services.As the market for interactive kiosks increases, so does the demand for smarter multi-function kiosks with advanced capabilities such as workload consolidation, artificial intelligence, smartphone and social media integration, 5G connectivity, telepresence, remote manageability, and data analytics.

For over 20 years we"ve been helping clients worldwide by designing, developing, & manufacturing custom LCD displays, screens, and panels across all industries.

Newhaven Display has extensive experience manufacturing a wide array of digital display products, including TFT, IPS, character displays, graphic displays, LCD modules, COG displays, and LCD panels. Along with these products, we specialize in creating high-quality and affordable custom LCD solutions. While our focus is on high-quality LCD products, we also have a variety of graphic and character OLED displays we manufacture.

As a longtime leader in LCD manufacturing, producing top-quality LCD modules and panels is our highest priority. At Newhaven Display, we’re also incredibly proud to uphold our reputation as a trusted and friendly custom LCD manufacturing company.

As a custom LCD manufacturing company, we ensure complete control of our custom displays" reliability by providing the industry"s highest quality standards. Our design, development, production, and quality engineers work closely to help our clients bring their products to life with a fully custom display solution.

Our excellent in-house support sets Newhaven Display apart from other display manufacturers. Modifications in the customization process are completed at our Illinois facility, allowing us to provide an exceptionally fast turnaround time.

Customer support requests sent by phone, email, or on our support forum will typically receive a response within 24 hours. For custom LCD project inquiries, our response time can take a few days or weeks, depending on the complexity of your display customization requirements. With different production facilities and a robust supply chain, we are able to deliver thefastest turnaround times for display customizations.

Our excellent in-house support and custom display modifications set Newhaven Display apart from other LCD display manufacturers. From TFTs, IPS, sunlight readable displays, HDMI modules, EVE2 modules, to COG, character, and graphic LCDs, our modifications in the customization process are completed at our Illinois facility, allowing us to provide quality and fast turnaround times.

As a display manufacturer, distributor, and wholesaler, we are able to deliver the best quality displays at the best prices. Design, manufacturing, and product assembly are completed at our headquarters in Elgin, Illinois. Newhaven Display International ensures the best quality LCD products in the industry in this newly expanded facility with a renovated production and manufacturing space.

With assembly facilities in the US, manufacturing facilities in China, and distribution channels worldwide, we pride ourselves on delivering high-quality custom display solutions quickly to locations worldwide.

For most Passive Matrix LCD modules, we can deliver a custom LCD with active area size and resolution or a custom backlight, mechanical housing, and electrical interface for a total NRE cost of less than USD 10k. Likewise, Createxplay can customize an Active Matrix LCD module’s backlight, housing, and mechanical interface for an NRE cost of less than USD 10k.

However, customizing the Active Matrix LCD itself (size/resolution) can cost restrictive for most applications since the minimum NRE required for panel mask sets is around USD 100k. Unless the scope of the business dictates a customer-owned TFT panel or the project volumes depending on the size, are over 500k pieces per year. In many applications, combining a standard active matrix TFT cell with a custom-designed module and electrical interface offers the most favorable overall cost solution.

The lead time is another consideration for a custom design that can be shorter than you would think. Short lead time is made off-the-shelf LCD modules attractive for designers.

LCD manufacturers like Createxplay can typically design custom housing for passive or active matrix LCDs – with integrated capacitive touch sensor and interface – within one to two weeks of the initial RFQ and then provide sample custom LCD modules 4-5wks after that.

Createxplay also offers customers the option to use off-the-shelf modules as prototypes within their design before the custom display is ready to evaluate other design aspects and perform qualification work (e.g., testing software).

For many implementers, the design freedom and iterative optimization that customization offers are well worth the additional time required to sample custom LCD modules.

Many Size Options – Flexible design requirements allow for a wide range of size options for custom glass LCD. Designs can be as small as 1.5″ and as large as 10″.

Very Fast Tooling Process – Concept to Production as fast as 12 weeks – Tooled samples delivered in as little as 4 weeks. Once customer provides drawing to sales@azdisplays.com , we can have a proposed design within in 1-2 days.Proposal Design

Our company vision is to be the experts for custom Color TFT LCD integration and connectivity by coining and living by the phrase ” We Make LCD’s Work.” Earth’s working knowledge of the display industry has developed from an “In the Trenches” approach to solving display problems in a multitude of industries. This customer centric approach has been the foundation of our 20 year success by building customer confidence and assisting in streamlining product launch cycles. If a custom Touchscreen LCD solution is your need EarthLCD must be your LCD technology partner of choice. Since 1994, we have developed more custom LCD solution than almost any company in the world.

FVT – Fractional Video Technology U.S. Patent 7667668 – Allows one LCD controller to run 8 sub VGA panels off a single LCD controller over Cat 5 cable with data, power and touch sent over a single cat 5 cable up to 100 feet or more.

EarthLCD products and solutions are in medical devices and facilities worldwide. They have appeared in major motion pictures, in amusement parks, gaming machines, golf carts, and vehicles. Our tremendous technology tool kit, global relationships, and depth of experience can reduce your time to market and total costs on almost any LCD related project. Both in house and off shore resources for design and manufacture allow us to get the job done. Our values and reputation have stood the test of time and were are committed to innovation, value and service. Give us a chance to make your LCD’s work. Below are technologies that Earth has pioneered in the LCD industry that are available for your project.

FVT – Fractional Video Technology – build LCD monitor’s with small sub VGA LCD’s – allow frame splitting for mass display application like digital signage ie run 4 – 8 LCD’s off single VGA port

Liquid Crystal Displays or more commonly known as LCDs are one of the most common electronic components which help us interact with an equipment or a device. Most personal portable equipment and even gigantic industrial equipment utilize a custom segment display to display data. For many portable consumer electronics, a segment LCD display is one of the biggest contributors to the overall cost of the device, hence designing a custom segment display can drive the cost down while also utilizing the display area in the most optimum manner. These displays have the lowest cost per piece, low power requirements, and a low tooling fee too.

At first thought, designing a custom segment LCD might look like a Herculean task, but trust me that it is easier than it seems. In this article, we have summarised and compared the display types and available technologies which are required to construct a custom segment LCD. We have also provided a flowchart that can act as a step-by-step guide while you design your own custom LCD. We have also provided the process we followed, a require gathering sheet we used for communicating our needs to the manufacturer, and a few other data and the quotation we received from the manufacturer.

LCD Bias– It denotes the number of different voltage levels used in driving the segments, static drives (explained later in this article) only have 2 voltage levels or 2 bias voltage while multiplex drives have multiple voltage levels. For example, 1/3 will have 4 bias voltages.

LCDs utilizes the light modulating properties of liquid crystals which can be observed by using polarizing filters. Polarizing filters are special materials that have their molecules aligned in the same direction. If the light waves passing through polarisers have the same orientation as the filter, then the molecules of lights are absorbed by the filter, hence reducing the intensity of light passing through it, making it visible.

A custom LCD is important for maximizing the efficiency of the display area by adding custom symbols and characters. It also helps in reducing the cost and improving energy efficiency of the product. A higher number of custom symbols and specified placement of numerical and alphanumerical characters make the display more informative and readable for the user. This makes it look better than the plain old boring displays we get in the market. Furthermore, we can specify the viewing angle, contrast, and other specifications which can increase durability or give a better value for money for our intended usage.  A typical Custom Segment display is shown below, we will also show you how to design and fabricate the same further in the article.

The LCD display doesn’t emit any light of its own, therefore it requires an external source of illumination or reflector to be readable in dark environments.

While designing a custom segment LCD display, we have the leverage of choosing a lot of parameters that affect the final product. From the color of the display to the illumination technique and color of illumination as well as the type of input pins. Some important considerations we need to take while designing a custom 7 segment display are - the type of display, i.e. positive or negative, illumination method, driving technique, polarising type, and connection method. All these design criteria are explained below:

So, which one should you choose? When the displays are to be used in areas with higher ambient light, we should select positive segment LCD display as it has better visibility than negative segment LCD displays without using a backlight.

As we know that LED displays don’t emit any light, hence to illuminate it and make it visible in a dark environment, we can use different methods of illumination. The most common LCD Illumination methods are compared below:

A polarizer film is the most important component of an LCD display, which makes it possible to display characters by controlling the light. There are 3 types of polarizers that can be used in the LCD display, the properties and difference are given below:

If your products need to be used with a switchable backlight, then trans-reflective reflectors are best to be used for front reflectors. If the device has to be used without backlight, then we can select a reflective polarizer for the back-panel as it gives the best contrast ratio.

If your displays have fewer segments, then static LCD drive is preferred as it is easier to control and cheaper to construct, and has a better contrast ratio. But let’s say that if the number of segments in the display are more than 30-40 then a multiplex LCD drive should be preferred as it has multiple common pins, hence reducing the total number of pins required to drive the display.

Choosing a connector type!!! For the prototyping phase or if you need to connect your LCD display on a Microcontroller directly, a pin type connector is the best and most economical option you have. If you need to connect your LCD display in a final product with a high volume of production which also requires to be extremely durable, but at the same time should not take up a lot of space, a Flex type LCD Connector will work best for you

LCDs have limited viewing angles and when seen from an angle they lose contrast and are difficult to be observed.  The viewing angle is defined by the angles perpendicular to the center of the display towards its right, left, up, and down which are denoted by the notations 3:00, 9:00, 12:00, and 6:00 respectively. The viewing angle of LCD can be defined as the angle w.r.t. to the bias angle at which the contrast of segments is legible.

To improve the viewing angle in an LCD, a Bias is incorporated in the design which shifts the nominal viewing angle with an offset. Another technique is to increase the Voltage, it affects the bias angle, making the display crisper when viewed from a direction.

For example, the viewing angle of a TN type TFT LCD is 45-65 degrees. Extra-wide polarising film (EWP) can increase the viewing angle by 10 degrees, using an O film polariser can make the viewing angles 75 degrees but these come at a cost of reduced contrast.

LCD Control chip or LCD driver chips can be mounted on the flex cable, display, or externally on a PCB. The placement of LCD control chip can affect the cost and size of the display. The 2 most common methods of chip placement are-Chip of Board (COB)and Chip on Glass(COG) which are described below:

We planned to design an air quality monitoring system for which we needed a custom segment LCD panel for an air quality monitoring device. Our product needs to display the following data: 2.5-micron and 10-micron particulate matter (PM) suspended in the air; the units should be in parts per million (PPM). CO2 in the air in PPM along with total volatile organic compounds present in the air in parts per billion (PPB). To make the product more usable, we included time in 24-hour format, Temperature in ºC, Battery status, loudspeaker status, Bluetooth status, and Wi-Fi status. And for some personal touch, we also added how good the air quality in the room is by using 3 different smileys.

We realized that it was impossible to provide all these data in a generic LCD available in the market, thus decided to build a custom LCD for our project.

A step-by-step flowchart is shown below to walk you through each and every step of selecting components and getting your custom segment LCD manufactured.

Usually, the displays are mounted at a height of 4.5 feet from the ground, thus the viewing direction was selected to be 12"O clock with an operating frequency of 64Hz. We selected a Transmissive polarizer for the front glass and a reflective polarizer for the rear glass so that the natural light can pass through the front panel and the display can achieve the maximum contrast without the need for backlighting and we opted for the pin type connectors as they are easy for prototyping and are suitable for harsh environment with a lot of vibrations and shocks which best suited our purpose.

In the above image of a custom display design, we sent to the manufacturer, the red lines over multiple characters indicate that all these are considered as a single segment. For the sake of simplicity, we added test like T, S, U, B to denote Text, Symbols, Units, and Battery respectively. These characters were followed by numbers to simplify communication between us and the manufacturer. For example, if we needed any particular text or symbol to remain on, we can easily specify that to the manufacturer by using the corresponding text for that segment.

We mailed our requirements to multiple LCD manufacturers, (you will find a lot of LCD manufacturers on the Internet). Most LCD manufacturers have competitive pricing, and reply within a week. A sample requirement sheet is shown above which a customer needs to fill to specify all the details to the manufacturer.

This is a sample Custom Segment LCD quotation we got from one of the manufacturers. As you can see, the cost is based on the quantity. Higher the quantity, lower the cost. Apart from the cost per quantity, there is one more component called tooling fees. Tooling fee is a one-time fee charged by the manufacturer. It is for the technical design, support, and customization of the product. Customization of PCB or tooling of LCD can drive the tooling price higher or lower.

A custom segment LCD can help you personalize your product while also saving the overall cost of your product. The whole process will take you around 2-3 months, which will include the designing phase, prototyping phase, and getting your custom segment LCDs delivered to your doorstep. Higher ordering quantity will reduce the cost per piece of each unit, thus driving down the cost of your final product.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

Since 1983, Planar display solutions have benefitted countless organizations in every application. Planar displays are usually front and center, dutifully delivering the visual experiences and critical information customers need, with proven technology that is built to withstand the rigors of constant use.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

Since 1983, Planar display solutions have benefitted countless organizations in every application. Planar displays are usually front and center, dutifully delivering the visual experiences and critical information customers need, with proven technology that is built to withstand the rigors of constant use.

IPS Ready Upgraded eXtremeRate Clear Custom Replacement Housing Shell for Gameboy Advance SP GBA SP – Compatible with Both IPS & Standard LCD – Console & Screen NOT Included - ASPM5001

Decrease quantity for IPS Ready Upgraded eXtremeRate Clear Custom Replacement Housing Shell for Gameboy Advance SP GBA SP – Compatible with Both IPS & Standard LCD – Console & Screen NOT Included - ASPM5001

Increase quantity for IPS Ready Upgraded eXtremeRate Clear Custom Replacement Housing Shell for Gameboy Advance SP GBA SP – Compatible with Both IPS & Standard LCD – Console & Screen NOT Included - ASPM5001

eXtremeRate raised the project REVIVTRO in 2020, aimed to revive your retro gaming console with modern tech.IPS screen is now popular in restoration project for Gameboy Advance SP.But most of the replacement shells for GBA SP in the market is not ready for IPS screen installation. So eXtremeRate re-designed the mold to make it easy for both IPS and Standard screen installation.And with more accurate mold and made of premium ABS material, the quality of the eXtremeRate upgraded housing is one of the best in the world.So let’s take the handheld console for GBA SP from your drawer and give a new look to your old friend!

Read Before Purchase:1.This product is only compatible with Gameboy Advance SP handheld game console.2. The replacement shell is also compatible with Game Boy Advance SP backlight IPS LCD display. The IPS LCD display is NOT included.3. This is a full housing shell with buttons for Game Boy Advance SP. The console, screen and other parts are not included.4. Required customers to take apart the console to replace your original shell; Required customers handy with console installation; Get the installation video guide by searching “eXtremeRate shell for GBA SP” or “R7EHybsHhE4” on Youtube.

Package Included:1* Full Housing shell1* Battery cover case1* A B L R buttons1* Volume button1* On Off button1* Select Start buttons1* Power button1* Dpad1* Rubber conductive pad2* Screwdriver28* ScrewsNote: The console, screen and other parts are not included!

IPS Ready Upgraded eXtremeRate Clear Red Custom Replacement Housing Shell for Gameboy Advance SP GBA SP – Compatible with Both IPS & Standard LCD – Console & Screen NOT Included - ASPM5002

Decrease quantity for IPS Ready Upgraded eXtremeRate Clear Red Custom Replacement Housing Shell for Gameboy Advance SP GBA SP – Compatible with Both IPS & Standard LCD – Console & Screen NOT Included - ASPM5002

Increase quantity for IPS Ready Upgraded eXtremeRate Clear Red Custom Replacement Housing Shell for Gameboy Advance SP GBA SP – Compatible with Both IPS & Standard LCD – Console & Screen NOT Included - ASPM5002

eXtremeRate raised the project REVIVTRO in 2020, aimed to revive your retro gaming console with modern tech.IPS screen is now popular in restoration project for Gameboy Advance SP.But most of the replacement shells for GBA SP in the market is not ready for IPS screen installation. So eXtremeRate re-designed the mold to make it easy for both IPS and Standard screen installation.And with more accurate mold and made of premium ABS material, the quality of the eXtremeRate upgraded housing is one of the best in the world.So let’s take the handheld console for GBA SP from your drawer and give a new look to your old friend!

Read Before Purchase:1.This product is only compatible with Gameboy Advance SP handheld game console.2. The replacement shell is also compatible with Game Boy Advance SP backlight IPS LCD display. The IPS LCD display is NOT included.3. This is a full housing shell with buttons for Game Boy Advance SP. The console, screen and other parts are not included.4. Required customers to take apart the console to replace your original shell; Required customers handy with console installation; Get the installation video guide by searching “eXtremeRate shell for GBA SP” or “R7EHybsHhE4” on Youtube.

Package Included:1* Full Housing shell1* Battery cover case1* A B L R buttons1* Volume button1* On Off button1* Select Start buttons1* Power button1* Dpad1* Rubber conductive pad2* Screwdriver28* ScrewsNote: The console, screen and other parts are not included!