lcd module specifications manufacturer

Learn all about touch types, brightness, backlights, color depths, and more. We’ve created a key terms and definitions library to guide you along your lcd technology search.

LCD brightness, or more technically “Luminance”, is measured in millicandles of luminance per square meter, also known as “NITs”. Serious specifies a “minimum typical” brightness for each display, meaning that the described LCD has a typical luminance specification at least that amount. LCD brightness is measured at the LCD’s initial power-up. See backlight longevity, below, for how LCD backlights degrade over time.

LCD backlight lifetime is a function of the specific LEDs selected for the backlight, and is measured in thousands of hours. If the backlight is maintained at 100% full power from initial LCD powerup fresh from the Serious factory, the typical brightness after that many hours will be typically 50% of its initial luminance.

Color LCDs get darker when operated below the minimum temperature range, and respond more sluggishly to visual changes. At higher temperatures, LCDs get washed out. At certain temperature extremes, the LCD driver chips may not function at all. The LCD temperature range is the minimum range where the LCD is deemed to perform acceptably without factoring in any backlight warming. LCD backlights do generate (when fully powered) several degrees of heat that can help obtain better LCD functionality at the low end of the LCD specification.

Note this range does not mean the SIM will cease functioning necessarily. Most SIMs are rated at -40 to +80C, so it is possible the SIM can continue to function even if the LCD is not visible to the user.-20 to +70C: most cost effective, most common

This is the number of bits the LCD uses to represent one pixel. There is often a GUI performance penalty for going above 16 bits because 4 bytes (vs. 2) have to be used to represent a pixel on the driver MCU and typically this impacts memory and performance (or, alternatively, the power of the MCU required to deliver equivalent performance).  Unless your GUI has extensive large shading gradients, 16-bit is almost always adequate for most applications.16 bit / 65K colors: most cost effective, most widely available, suitable for most applications (RGB565)

LCD technology is rapidly evolving. There are several types of “viewing technology” now available. Some are a function of the raw LCD panel fabrication process, others a result of optically bonded film techniques.

TFT-TN Portrait: traditional portrait mode viewing. When the LCD is viewed with the long edge vertically, has good viewing from 3 sides (typically 9, 12, and 3 o’clock) and reduced angle viewing from one (typically 6 o’clock)

Multi Viewing Angle (MVA): Multi-domain Vertical Alignment (MVA), often called “Multi Viewing Angle” is a new technology combining optics with LCD manufacturing techniques providing good viewing angles from all 4 directions without contrast or color shifting. MVA carries a price premium and is becoming less common as OVA is less expensive with similar results, and IPS delivers better performance and more common.

In Plane Switching (IPS): an LCD fabrication technology which gives excellent viewing angles from all directions without contrast/color shift. It carries a higher price premium and is more common in larger panels (10.1″+) in the industrial/embedded space.

BEZEL OPENING: inner limit where your bezel should be contacting the surface of the touch panel & LCD with any gasket and not adversely affect touch performance

ACTIVE AREA (A.A.): active pixel area of the LCD, and of the touch region; you will want to ensure visually the center (C) of this active area is visible to the end user, and accessible for touch interface

Color can be technically and empirically measured, but how it is perceived by the human eye is the true goal of color appearance in an LCD. A color “gamut” is a specific range of color out of the full color palette most relevant to how the human eye perceives color.

This diagram shows the “standard” color spaces we want to reference when we talk about what color appearance can be generated by a specific LCD:The colored areain the graph is the total range of color visibleto the human eye. Not all these colors can be generated by an LCD. D65 is the white point

When colors are displayed on a specific LCD, they deliver colors in an area similar to the dashed triangle on the diagram above — in other words, a subset of the NTSC space, and often close to the sRGB space used to take and edit photographs digitally. In web and GUI development tools, colors are generally represented by a triplet of 3 hex values from 0x00-0xFF (i.e. 0-255 decimal, or 0-100%) in triplets such as 0x223344 where 0x22 is hex 22 for the red value, 0x33 for green, and 0x44 for blue. Each individual color (red, green. blue) when driven at 100% (0xFF) represents a corner of the dashed “LCD performance” triangle.

Because the NTSC gamut is the most relevant color space to the human eye, the standard mechanism for determining an LCD’s color performance is to compare the LCD’s performance (the dashed triangle) against this NTSC gamut:NTSC(gamut)% = area of dashed triangle / area of NTSC triangle * 100%

Established in 1998, Winstar Display Co., Ltd. is a reliable LCD Display Module Manufacturer and LCD Panel Supplier. Winstar has development of high-quality display module products. We operate worldwide, configure, service products, and also provide logistics support to deliver products and services competitively. We provide LCM Modules including monochrome TN/STN/FSTN LCM, COG LCD, TFT LCM / TFT panels, FSC-LCD, graphic LCM, character LCD displays, OLED display modules (PMOLED), custom LCD displays, OLED and LCD panel.

New Vision Display is a custom LCD display manufacturer serving OEMs across diverse markets. One of the things that sets us apart from other LCD screen manufacturers is the diversity of products and customizations we offer. Our LCD portfolio ranges from low-cost monochrome LCDs to high-resolution, high-brightness color TFT LCDs – and pretty much everything in between. We also have extensive experience integrating LCD screen displays into complete assemblies with touch and cover lens.

Sunlight readable, ultra-low power, bistable (“paper-like”) LCDs. Automotive grade, wide operating/storage temperatures, and wide viewing angles. Low tooling costs.

Among the many advantages of working with NVD as your LCD screen manufacturer is the extensive technical expertise of our engineering team. From concept to product, our sales and technical staff provide expert recommendations and attentive support to ensure the right solution for your project.

In addition, our extensive technology portfolio and manufacturing capabilities enable us to deliver high-quality products that meet the unique specifications of any application. To learn more about what makes us the display manufacturer for your needs, get in touch with us today.

As a leading LCD panel manufacturer, NVD manufactures custom LCD display solutions for a variety of end-user applications: Medical devices, industrial equipment, household appliances, consumer electronics, and many others. Our state-of-the-art LCD factories are equipped to build custom LCDs for optimal performance in even the most challenging environments. Whether your product will be used in the great outdoors or a hospital operating room, we can build the right custom LCD solution for your needs. Learn more about the markets we serve below.

Established in 2007, Raystar has built its reputation by offering advanced products in PMOLED display and modules as well as in FSTN / STN LCD Display Module, COG LCD, TFT LCD Display.

Asia has long dominated the display module TFT LCD manufacturers’ scene. After all, most major display module manufacturers can be found in countries like China, South Korea, Japan, and India.

However, the United States doesn’t fall short of its display module manufacturers. Most American module companies may not be as well-known as their Asian counterparts, but they still produce high-quality display products for both consumers and industrial clients.

In this post, we’ll list down 7 best display module TFT LCD manufacturers in the USA. We’ll see why these companies deserve recognition as top players in the American display module industry.

STONE Technologies is a leading display module TFT LCD manufacturer in the world. The company is based in Beijing, China, and has been in operations since 2010. STONE quickly grew to become one of the most trusted display module manufacturers in 14 years.

Now, let’s move on to the list of the best display module manufacturers in the USA. These companies are your best picks if you need to find a display module TFT LCD manufacturer based in the United States:

Planar Systems is a digital display company headquartered in Hillsboro, Oregon. It specializes in providing digital display solutions such as LCD video walls and large format LCD displays.

Microtips Technology is a global electronics manufacturer based in Orlando, Florida. The company was established in 1990 and has grown into a strong fixture in the LCD industry.

What makes Microtips a great display module TFT LCD manufacturer in the USA lies in its close ties with all its customers. It does so by establishing a good rapport with its clients starting from the initial product discussions. Microtips manages to keep this exceptional rapport throughout the entire client relationship by:

Displaytech is an American display module TFT LCD manufacturer headquartered in Carlsbad, California. It was founded in 1989 and is part of several companies under the Seacomp group. The company specializes in manufacturing small to medium-sized LCD modules for various devices across all possible industries.

The company also manufactures embedded TFT devices, interface boards, and LCD development boards. Also, Displaytech offers design services for embedded products, display-based PCB assemblies, and turnkey products.

Displaytech makes it easy for clients to create their own customized LCD modules. There is a feature called Design Your Custom LCD Panel found on their site. Clients simply need to input their specifications such as their desired dimensions, LCD configuration, attributes, connector type, operating and storage temperature, and other pertinent information. Clients can then submit this form to Displaytech to get feedback, suggestions, and quotes.

A vast product range, good customization options, and responsive customer service – all these factors make Displaytech among the leading LCD manufacturers in the USA.

Products that Phoenix Display offers include standard, semi-custom, and fully-customized LCD modules. Specifically, these products comprise Phoenix Display’s offerings:

Clients flock to Phoenix Display because of their decades-long experience in the display manufacturing field. The company also combines its technical expertise with its competitive manufacturing capabilities to produce the best possible LCD products for its clients.

True Vision Displays is an American display module TFT LCD manufacturing company located at Cerritos, California. It specializes in LCD display solutions for special applications in modern industries. Most of their clients come from highly-demanding fields such as aerospace, defense, medical, and financial industries.

The company produces several types of TFT LCD products. Most of them are industrial-grade and comes in various resolution types such as VGA, QVGA, XGA, and SXGA. Clients may also select product enclosures for these modules.

All products feature high-bright LCD systems that come from the company’s proprietary low-power LED backlight technology. The modules and screens also come in ruggedized forms perfect for highly-demanding outdoor industrial use.

LXD Incorporated is among the earliest LCD manufacturers in the world. The company was founded in 1968 by James Fergason under the name International Liquid Xtal Company (ILIXCO). Its first headquarters was in Kent, Ohio. At present, LXD is based in Raleigh, North Carolina.

All of their display modules can be customized to fit any kind of specifications their clients may require. Display modules also pass through a series of reliability tests before leaving the manufacturing line. As such, LXD’s products can withstand extreme outdoor environments and operates on a wide range of temperature conditions.

We’ve listed the top 7 display module TFT LCD manufacturers in the USA. All these companies may not be as well-known as other Asian manufacturers are, but they are equally competent and can deliver high-quality display products according to the client’s specifications. Contact any of them if you need a US-based manufacturer to service your display solutions needs.

We also briefly touched on STONE Technologies, another excellent LCD module manufacturer based in China. Consider partnering with STONE if you want top-of-the-line smart LCD products and you’re not necessarily looking for a US-based manufacturer. STONE will surely provide the right display solution for your needs anywhere you are on the globe.

Microtips Technology is a leading custom lcd module manufacturer and we offer a full array of products and services. We have the most advances display technologies available to use in your design and if there is anything you want to change about one of our displays, we can make it happen. All of our displays are fully customizable to your specification and can include extra features like a capacitive touchscreen, an anti-reflective or anti-glare coating, or custom cover glass. Our sales and engineering staff will be with you through the entire process and will ensure our custom lcd display and your end product look their very best.

We have thousands of standard products that are in stock and available from our Seattle, WA and Hong Kong warehouses to support fast product development and preproduction without MOQ. The stock covers TN, STN LCD display panels, COB, COG character LCD display, graphic LCD display, PMOLED, AMOLED display, TFT display, IPS display, high brightness and transflective, blanview sunlight readable display, super high contrast ratio display, lightning fast response displays, efficient low power consumption display, extreme temperature range display, HMI display, HDMI display, Raspberry Pi Display, Arduino display, embedded display, capacitive touch screen, LED backlight etc.  Customers can easily purchase samples directly from our website to avoid time delays with setting up accounts and credit terms and shipping within 24 hours.

Many of our customers require customized OEM display solutions.  With over two decades of experience, we apply our understanding of available display solutions to meet our customer’s requirements and assist from project concept to mass production. Using your ideas and requirements as a foundation, we work side by side with you to develop ideas/concepts into drawings, build prototypes and to final production seamlessly. In order to meet the fast changing world, we can provide the fastest turnaround in the industry, it takes only 3-4 weeks to produce LCD panels samples and 4-6 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen samples. The production time is only 4-5 weeks for LCD panels and 5-8 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen.