1.8 inch st7735r spi 128x160 tft lcd display module manufacturer

I bought this LCD Display for a university course that I"m taking. The screen itself works amazingly with the breadboard that I had on hand and the tm4c123 microcontroller that we all used in the class. On both sides of the screen are indicators of what each pin should be assigned/connected to on the microcontroller. A big plus with this screen in comparison to others on the market is that it comes with connector pins connected to it already. Many people in my class had to learn how to solder and sloppily connected external pins to their other screens. That"s most certainly not a problem here! Additionally, this screen had an SD card, if i remember correctly, that allows for more functionality. The screen has a full range of colors and allows both text and manually imported sprites to be displayed onto it. I"m not too sure if that all deals with the drivers I mention later or the screen itself, but its most certainly a plus in its own aspect. The LCD is built well and at no moment in time was I scared about it breaking - I even remember throwing it in my backpack connected to a bunch of wires while rushing to class on multiple occasions.

The only complaint that I have with this screen is the lack of "drivers" that it has to display more complicated graphics. One specific example that I remember dealing with was that there is no horizontal orientation change feature. To display graphics horizontally, I had to rotate them in photoshop manually and import them into my program like that. This made things like positioning the sprites and graphics and, more importantly, edge detection more complicated as I had to account for the changed position basis (originally being the bottom left corner but being changed to the top left for the sprites when the screen itself is rotated).

Specification:Driver IC: ST7735RResolution: 128 x 160 pixelsFeatures:- Can help you to get rid of the Arduino serial monitor.- Some tests and provide UTFT library, AdaFruit Library and instruction on DropBox.- Tested with Latest Arduino 1.6.5.IO interface:1. RESET --directly to the microcontroller IO2. CS --directly to the microcontroller IO3. A0 --IO control registers select4. SDA --IO control data transmission5. SCL --IO control SPI bus6. BL--High Level 3.3V backlight onNote:Please contact us for documents and driver if you need. Please noted this LCD is 3.3V, which can not receive 5V signals from the Arduino, so please use a 1k series resistors between GPIO lines on a 5V arduino and this LCD, power this LCD with 5V but drive it with "level shifted resistor" GPIO lines.Besides, you could use mcifriend 2.8 inch TFT LCD library to get it to work, it will work fine with the Mega or Uno.

We will be closed for operations from 16th Jan till 27th Jan 2023. Orders will still be accepted during the holiday period and be processed once we resume operations.During the Festive Season, we are providing 10% discount promotion for all modules and services. Please use coupon CNY2023 to enjoy the discount. No conditions required.Promotion valid till 31st January 2023.

The 1.8 inch TFT LCD Module SPI Serial 51 128 x 160 is a compact colourful display that works well with Raspberry Pi, Android and other microcontrollers.

The display module is bight, anti-reflective and offers the choice of loading images via SD card through the slot on the back of the screen or via a microcontroller.

16-BIT RGB 65K colour display and the internal driver IC is ST7735S, which uses 4-wire SPI communication. The module contains an LCD display and a PCB control backplane.

It only takes a few IOs to illuminate the display with an SD card slot for convenient function expansion provide underlying libraries and rich sample programs forArduino, C51, and STM32 platforms.

TFT-LCD liquid crystal display (TFT) is thin film transistor liquid crystal display (TFT). TFT liquid crystal provides a semiconductor switch for each pixel, and each pixel can be directly controlled by point pulse, so each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately controlled. Display color levels, TFT LCD color more real, good brightness, high contrast, strong sense of hierarchy and bright colors.

8 Tft spi are mainly used for components and are also connected to the Internet using a CAGR of 1.8 tft spi. They are differ in the way that 1.8 Tft spi control and create a smoother version of the basic ones. When the connectors are inserted in the Tft control system, they create a smoother way of creating the idea of the components.

You can easily find the connections of 1.8 Tft spi in the form of a wholesale Tft lcd display, or for other purposes, it is easy to find the wholesale tft spi components on Alibaba.

While there is a difference between 1.8 Tft spi bulk and 1.8 Tft spi bulk are available in various sizes. The 1.8 Tft lcdds are the simplest versions of Tft LCDs, and for the reason that they are not the same as 1.8 Tft LCDs.

8 Tft spi can be divided in two ways: 1.8 tft spi, 1 inch tft spi, and 1 inch tft spi are the two basic ones. 8 Tft spi have a smaller display and 1.8 tft spi frame of the option, 2 inch lcd display, and 1 inch tft spi are all the same. The options of 1.8 tft spi include the polystyrene lcd display, and 1 inch tft spi.

The 1.8inch LCD uses the PH2.0 8PIN interface, which can be connected to the Raspberry Pi according to the above table: (Please connect according to the pin definition table. The color of the wiring in the picture is for reference only, and the actual color shall prevail.)

ST7735S is a 132*162 pixel LCD, and this product is a 128*160 pixel LCD, so some processing has been done on the display: the display starts from the second pixel in the horizontal direction, and the first pixel in the vertical direction. Start to display, so as to ensure that the position corresponding to the RAM in the LCD is consistent with the actual position when displayed.

The LCD supports 12-bit, 16-bit and 18-bit input color formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this routine uses RGB565 color format, which is also a commonly used RGB format

Note: Different from the traditional SPI protocol, the data line from the slave to the master is hidden since the device only has display requirement.

Framebuffer uses a video output device to drive a video display device from a memory buffer containing complete frame data. Simply put, a memory area is used to store the display content, and the display content can be changed by changing the data in the memory.

If you need to draw pictures, or display Chinese and English characters, we provide some basic functions here about some graphics processing in the directory RaspberryPi\c\lib\GUI\GUI_Paint.c(.h).

Set points of the display position and color in the buffer: here is the core GUI function, processing points display position and color in the buffer.

The fill color of a certain window in the image buffer: the image buffer part of the window filled with a certain color, usually used to fresh the screen into blank, often used for time display, fresh the last second of the screen.

Display time: in the image buffer,use (Xstart Ystart) as the left vertex, display time,you can choose Ascii visual character font, font foreground color, font background color.;

2. The module_init() function is automatically called in the INIT () initializer on the LCD, but the module_exit() function needs to be called by itself

Python has an image library PIL official library link, it do not need to write code from the logical layer like C, can directly call to the image library for image processing. The following will take 1.54inch LCD as an example, we provide a brief description for the demo.

Note: Each character library contains different characters; If some characters cannot be displayed, it is recommended that you can refer to the encoding set ro used.

The first parameter is a tuple of 2 elements, with (40, 50) as the left vertex, the font is Font2, and the fill is the font color. You can directly make fill = "WHITE", because the regular color value is already defined Well, of course, you can also use fill = (128,255,128), the parentheses correspond to the values of the three RGB colors so that you can precisely control the color you want. The second sentence shows Micro Snow Electronics, using Font3, the font color is white.

The demo is developed based on the HAL library. Download the demo, find the STM32 program file directory, and open the LCD_demo.uvprojx in the STM32\STM32F103RBT6\MDK-ARM directory to check the program.

For the screen, if you need to draw pictures, display Chinese and English characters, display pictures, etc., you can use the upper application to do, and we provide some basic functions here about some graphics processing in the directory STM32\STM32F103RB\User\GUI_DEV\GUI_Paint.c(.h)

Image buffer part of the window filling color: the image buffer part of the window filled with a certain color, generally as a window whitewashing function, often used for time display, whitewashing on a second

Display time: in the image buffer,use (Xstart Ystart) as the left vertex, display time,you can choose Ascii visual character font, font foreground color, font background color.

DEV_Config.cpp(.h): It is the hardware interface definition, which encapsulates the read and write pin levels, SPI transmission data, and pin initialization;

image.cpp(.h): is the image data, which can convert any BMP image into a 16-bit true color image array through Img2Lcd (downloadable in the development data).

The hardware interface is defined in the two files DEV_Config.cpp(.h), and functions such as read and write pin level, delay, and SPI transmission are encapsulated.

For the screen, if you need to draw pictures, display Chinese and English characters, display pictures, etc., you can use the upper application to do, and we provide some basic functions here about some graphics processing in the directory GUI_Paint.c(.h)

Display time: in the image buffer,use (Xstart Ystart) as the left vertex, display time,you can choose Ascii visual character font, font foreground color, font background color.

The 1.8" display has 128x160 color pixels. The TFT driver (ST7735) can display full 18-bit color. The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector)

In the above example, Node32-Lite and this 1.8-inch LCD.  Please refer to the tutorial here: ST7735S interfacing with ESP32 to make the connections, Arduino library installation, and modification needed for it to works on this LCD.