uctronics tft lcd in stock

The UCTRONICS 3.5 Inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well-mates with the Raspberry Pi boards. With a tiny size, vivid image, and responsive touchscreen, it is definitely ideal for portable devices and multimedia projects. It is a great replacement for a heavy and bulky HDMI monitor, keyboard, and mouse

Step1: Align the pin 1 of the edge connector between the LCD display and Raspberry pi board, connect the pin 1,2,3,4 then pin 19,20,21,22,23,24,25,26.

Sometimes you want to test, measure or inspect what is going on in a electrical system, and displays and meters are needed. UCTRONICS have different kinds of displays, multimeters, voltage meters, frequence counters and so on. Some displays also works as monitors for a small computer.

UCTRONICS U611101 is a 3.5” TFT LCD display with case, SPI interface and touchscreen support. It works with all standard Raspberry Pi models and supports operating systems like Raspbian, Ubuntu, Kali and RetroPie. Windows 10 IoT is NOT supported.

The UCTRONICS 3.5 Inch touch screen with close is fully compatible with the standard Raspberry Pi model B/B+. With a tiny size, vivid image, and responsive touchscreen, it is definitely ideal for portable devices and multimedia projects. It is a great replacement for a heavy and bulky HDMI monitor, keyboard, and mouse.

The UCTRONICS 3.5-Inch TFT LCD Touch Screen w/ Pen for Raspberry Pi is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice.

Color:3.5 inch HDMI LCD Display with SD card The 3.5 inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice. FeaturesTouch function support system: Raspbian. Display function support system: Raspbian, kali, ubuntu, Retropie, PiPlayer, windows10 etcLCD Display Resolution: 480 x 320 pixelsHDMI Input Resolution support: 480x320 ~ 1920x1280Dimension: 55.98 x 85.60 mmSupport plug and play, touch screen, game and videoAutomatic driver installation scriptHeat sinks will protect your motherboard from overheating.Package Including1pcs 3.5 inch HDMI touch screen1pcs touch pen1pcs 16GB SD card1pcs HDMI to HDMI converter3pcs heat sinksNote: 1. The raspberry pi shown in the picture is not included.2. Recommend resolution: 480 * 320, 800 * 480, 800 * 600. Those resolutions higher than 480*320 will be compressed to 480*320 in LCD display. When resolution is compressed, the screen display ratio might be changed accordingly.Too High resolution will cause module power consumption rises.3. Please use the SD card which is with pre-installed driver and system directly.4. For the Male to Female Ribbon GPIO Cable to connect Raspberry Pi and 3.5inch Touch Screen, check ASIN: B07D991KMR.

The 3.5 inch TFT LCD HDMI Touchscreen Display Module for Raspberry Pi (B010601)is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice.The 480 x 320 pixels resolution TFT LCD with touch screen requires no external power supply. The software package contains everything you need to start, including calibration software and virtual keyboard.

Download and install driver The driver includes the settings of the Raspbain OS resolution and touch screen support. The LCD driver has been alreadyModel：B0106 installed in the Micro SD card shipped with the bundle kit that includes a Micro SD card. Otherwise users have to install the1. Introduction driver manually with the following steps for a clean system.UCTRONICS 3.5" HDMI TFT LCD display module is designed for Raspberry Pi 2 /Pi 3 Model B / B+ and can also be used on Step1 Expand the Micro SD cardother hardware platforms which have HDMI display interface. The 3.5" screen is the same size as the standard Raspberry Pi sudo raspi-config then choose Advanced Operations -> Expand Filesystem and hit Yes. Then go to Finish and youmodel B/B+, and well mates with these Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is need to run sudo reboot to reboot your Raspberry Pi.ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard Step2 Update your Raspberry Pi systemand mice. The highlight of this display module, it supports high frame rate videos playback compared to its SPI LCD sudo apt-get updatecounterpart. LCD screen backlight can be turned off by the tiny onboard button if needed. Step3 Download the driver package2. Specification sudo git clone https://github.com/UCTRONICS/UCTRONICS_LCD35_HDMI_RPI.git LCD Resolution: 480 x 320 pixels Support plug and play Step4 Come in the UCTRONICS_LCD35_HDMI_RPI Interface: HDMI & SPI Support touch screen cd UCTRONICS_LCD35_HDMI_RPI HDMI Input Resolution support: Support game and video Step5 Get run permissions 480x320 ~ 1920x1280 sudo chmod +x UCTRONICS_hdmi_backup Support audio split from HDMI Automatic driver installation script sudo chmod +x UCTRONICS_hdmi_install Dimension: 55.98 x 85.60 mm Well mate with Pi B+, Pi2 and Pi3 sudo chmod +x UCTRONICS_hdmi_restore3. Hardware installation Step6 Backup data

Exec=toggle-matchbox-keyboard.sh Website: http://www.uctronics.com

Type=Application Email: support@uctronics.com