ebikeling sw900 lcd display for sale

Needed a controller for testing so bought the only controller with connector for a display that I could get quickly (surprising how difficult/near impossible it is to find controllers sold alone that have a display cable. But, found Wal-Mart has a GREAT listing of controllers, better than eBay, Amazon, Sears, and Aliexpress combined, 100s of them! Check it out. I"m also now aware you can add a display cable to almost any controller because most have the signals on the PCB. Might be useful to someone.)

Anyway, bought an Ebikeling 36/48V 500W controller (yes, I know 22A capable) for use with 36V 10Ah batt, 2014 LCD 3 and Q100 (yes, I know 12-18A max by tinning the KU65 shunt.) I attempted to turn power down by setting C5=3, or so I thought; and therein lies the problem- that"s BMSBattery C5, and ebikeling S830 LCD display manual doesn"t even mention C settings

Regardless, the ebikeling 500W controller drives the Q100 smoothly on throttle, both sensored & sensorless, and they even work in pedal assist... except PAS is set to 0 in the display (hmmm, 1st clue: PAS shouldn"t work at all if PAS=0).

Here"s the big clue that controller & display aren"t communicating well: LCD 3 display shows 41V in lower right corner (which must be an AD measurement inside the LCD3 display), but MPH, battery icon charge level, W, and battery temp are all blank on the LCD3, and I assume all 4 are controller values "transmitted" from the controller to the display. (Yes, I"ve checked pinouts: swapped 2 sensor pins in the Hall plug which made the Q100 run sensored, and everything else aligns.)

Would someone please validate this logic & correct me of I"m wrong: the old LCD3 display and this new ebikeling 36/48 500W controller don"t communicate well if at all because the LCD 3 display only knows parameters P1-5 (P5=15 of course being 36V voltage level) and the ebikeling controller expects an LCD 830 display and communicates P1-16, e.g. requiring "P03 the parameter to set Voltage Class: 24V /36V / 48V." (P3 for the LCD 3 is PAS mode, 0 or 1.)

Bottom line, I assume the new controller is defaulting to "48V battery" and therefore even 41V full charge is empty, which it "transmits" to the display, if any data is sent at all. Controller probably sends mph, temp, and power, too, but the 5-parameter KT LCD 3 doesn"t understand the 16-parameter data stream.

I have searched battery icon blank, Ebikeling controllers etc, but nowhere did I find a mention about 16 parameter controllers, nor about differing parameter sets being a reason for non-communication, only incompatible displays & controllers. And, I"ve seen lots of discussion about flashing the LCD 3 to work with the TSDZ2 & Bafang MDM"s internal controllers, but nothing about making it work with other controllers.

Yes, I"ve read as many of Amberwolf"s posts on empty or half full battery symbols as I can, but nothing regarding parameters/ comms mismatch. I"m now starting to read casainho"s posts on flashing the LCD 3, but I gather it"s all in reference to the TSDZ2.

Suzhou KUNTENG Electronics Co., Ltd. is a specialized factory focusing on design, development, production and sale of electric vehicle controller, display instruments, sensors, corresponding products

So, same as at my company, there are probably ten or twenty hardware & software engineers sitting in a space together, all designing and programming similar but slightly different P parameter and C parameters and values for all their customers, with slightly different connectors. And they could probably make any one controller talk to a certain display. They"re simply software and memory upgrades. I "simply" want to know how to do it if possible.

Comparing my 2014 LCD3 P & C parameter lists to new S830 & SW900 P parameter sets, there"s very high similarity. Some Shenzhen Kunteng engineering manager probably asked, "So, why do we have 2 parameter lists?"

Then he tasked an engineer to simplify and merge the P & C parameters into one P parameter list, obsoleting some old displays, and creating new sales opportunities. Now the question is, how do I access the new list via the old LCD3? For example, when controller asks for P03 (24V, 36V, 48V) convert and send P5. When controller sends Watts value place it in the W window.

It"s the same thing they did with adding one (yellow) wire to 4-pin LED 810s several years ago, they made them 5-pin 810s, 880s, & 890s...so they"re minimally programmable and compatible with all 5-pin LCD wiring connector.

If three or four of the major motor companies motors often work with either LED or LCD 5-pin displays, then all of the 5-pin displays most likely share the same communications protocol. The difference, then, is the P & C parameters and the order in which they"re sent& read.

I read a very good article showing how to sample the serial line to be able to view controller data in the eBIKE display, by ebikebuilder1. Similar 16 parameter output as noted above.

Searching around, it seems Shenzhen Kunteng makes a large percent of all small EV controllers as well all the LED 790, 810s, 880s, 890s, all the LCD 3, 5 6, 8, 830...& 900 displays.

eBikeling 36/48V SW900 5 Pin LCD Display for Electric Bicycle ebike. 36/48V SW900 Display. - It shows remaining battery, current speed, average speed, maximum speed, clock, total and single trip distances. Wheel size can be changed for different applications. - This display lets the rider choose the assist level they desire if PAS is installed. efesales Available on GitHub and CodePen. Highly compatible. Designer friendly. More than 50% of total email opens occurred on a mobile device — a mobile-friendly design is a must for email campaigns. eBikeling 36/48V SW900 5 Pin LCD Display for Electric Bicycle ebike ITEM DESCRIPTION - You are bidding on a New eBikeling 36/48V SW900 5 Pin LCD Display for Electric Bicycle ebike - The SW900 LCD Display has multiple functions serving as a trip computer as well as controlling the whole ebike system after the conversion. - This display lets the rider choose the assist level they desire if PAS is installed. - It shows remaining battery, current speed, average speed, maximum speed, clock, total and single trip distances. Wheel size can be changed for different applications. Package Includes 36/48V SW900 Display Warranty: C overed under 3-Month warranty. GENERAL - Please don"t assume. Ask before you bid/buy. - We are a Square Trade member & you may purchase an additional warranty thru them. - If you have negative feedback please email us before bidding or your bid will be cancelled. - Winning bidder assumes all risk of liability with respect to the purchase of the product. - We guarantee that this item will arrive exactly as described in this auction. - All sales are final unless it is a warranty issue. - Buyer will be charged 20% restocking fee for any returned item unless it is a warranty issue. - We reserve the right to repair or replace the same item or refund the purchase efecc at our discretion. - At our option, we substitute/refund damaged or lost product at the time the insurance claim is paid. - All Items must be returned with all original contents and components with prior authorization. - Return shipping shall be the responsibility of the buyer. We pay shipping to send replacement back. - In case of damaged parcel: * Carrier might damage items during shipping. * Please inspect the package well before accepting the shipment from the carrier. * If you notice any damage to the box or the shipment, please don"t accept the parcel. * To report a damage parcel, please contact us. * We will follow up and file a "damage claim" with the carrier. * All shipping, packaging materials and boxes must be saved. * Carriers will pickup the damaged item for inspection. * Failure to provide everything necessary for us to file a damaged claim will void your warranty. * We can"t file a damage claim if you accept the shipment. * Therefore, we are not liable for any damage if the shipment is accepted and we were not contacted within the time limit. PAYMENTS - We accept PayPal and only ship to a confirmed address. - We accept E-Check through PayPal, Will ship after checks clears. - Checkout is expected within 3 days of auction close and payment within 4 days. - Unpaid auction wins will be forfeited after 4 days. SHIPPING - All orders are processed within 24 hrs of receipt of payment. Will be shipped within 1-3 business days. - The tracking number will be sent to you via e-mail when items are shipped. - Local pick up is available. Please email for arrangements. - International Buyers are responsible for duties of their countries. - International buyers: If you use USPS please be informed that USPS has neither tracking nor insurance for your packages outside of USA. We will not be held responsible of your package if anything wrong happened with the packages outside of USA. - Only ship to the confirmed address provided by PayPal. Please make sure your address in PayPal matches the address you would like us to ship to. - Address changing must be confirmed by our customer service before payment. - We can also ship to Hawaii, Alaska, APO, FPO, and Puerto Rico for an additional fee. Please email us for shipping fee if it is not stated. - Unless otherwise specified, we do not combine shipping. - Shipping fees and return fees are not refundable. RETURN & REFUND - Any problem has to be reported within seven days of receive. - No refund on shipping charges. - We will accept returns for items that were posted with incorrect information and/or wrong item shipped. - Buyer is responsible for any return shipping costs with insurance. - RMA is required for all returns; please email us with any problems. - All sales are final (SOLD AS-IS: NO exchange or returns). - Any item returned for warranty must be returned in the same condition that it was received. FEEDBACK Positive Feedback is left for Buyers once you have received your merchandise and let us know you are happy with the transaction by leaving us positive feedback. Please do not leave negative or neutral feedback without giving us the opportunity to remedy the situation first if you are displeased with our transaction. We cannot fix situations we are unaware of. We make every effort to provide outstanding products and service but we are only human and sometimes things go wrong. We appreciate your patience and opportunity to correct a situation if that happens. eBikeling 0100101018 - MT Copyright 2008 - EFE INTERNATIONAL INC.

Condition: New, Choose voltage: 36V, Model: SW900, Color: Black, Part Type: Display, Type: eBike LCD Display, For Bike Type: Electric Bike, Electric Bike Part Type: LCD, Brand: eBikeling, Voltage: 48V / 36V