lcd panel connector types free sample

It`s troublesome for the abord developer to get a few connector samples. So Panox Display could provide free connectors if clients need them, following are some connectors model for corresponding displays,

The CLIPS biscuit is a #10 two-piece snap-in plastic connector and can be glued in all wood materials. The ribbed pin is simply snapped into the fork. The ribs in the pin enable the position of a part to be adjusted; it can also be rotated 360° around the axis of the pin. This allows for a wide range of applications: from louvered vents to access panels, which can simply be snapped-in as well as serves simultaneously as a connector and hinge.

Typical lcd connector board have different features, including connector shells, pins and sockets, socket retainers, and seals. They also have different features, and they may be used for various applications. First, there are keyed connectors. They are only supposed to connect when they"re in the right position. This protects the pins from harm and prevents users from putting them in the wrong sockets. The other type of electrical connector is the locked connector. This one has a locking mechanism that prevents connections from shifting when shocked. The other type of lcd connector board is the hermetically sealed connector. This connector is designed to work underwater but up to a specific depth. Water-resistant connectors are also another type. These help in protecting electrical connections against water damage.

When it comes to buying lcd connector board, there are several factors that you need to consider, including performance and physical parameters. When it comes to performance parameters, choose one depending on the conditions in which it will be used. Such conditions include current, voltage, and operating temperature. Physical parameters are also an important consideration since they determine the design of electrical connections and the type of connections the connectors can be used for. Material is one of the important physical considerations. Most lcd connector board are covered with plastic. The wire conductors are made from brass, beryllium copper, phosphor bronze, and high copper alloy.

For wholesale lcd connector board, visit Alibaba.com. This online shopping platform has partnered with various Chinese wholesalers to offer you a wide range of connectors. You can visit the website at any time and place your order with a few clicks.

ZEBRA® Elastomeric Electronic Connectors are a comprehensive group of high performance interconnect devices with applications throughout the entire field of electronics. With the expansion of micro-electronics and miniaturization of all products, the same high reliability must be maintained.

ZEBRA® Elastomeric Connectors are an obvious choice. And one which offers a variety of alternatives based on the primary design objectives. Some of the more important considerations are:

ZEBRA® Elastomeric Connectors have alternating conductive and non-conductive layers. See diagram below. The conductive layers are oriented vertically in the thickness direction, making contact from top to bottom.

The six ZEBRA® Elastomeric Connector designs below are detailed in their dimensional and performance characteristics. Follow the general guidelines to determine the design characteristics most suitable for your application. See following pages for detailed characteristics.

To specify a connector to your exact requirements, substitute the metric measurements for width, length and height according to instructions below; example part# Ag(2.0 IB1 x 20 x 2.0)-U;

Micro-electronics interconnect packaging applications by their very nature leave a minimum of space in which to assemble mating components. High reliability and very small interconnections, with an everincreasing number of I/O’s, are a must if design objectives are to be met. ZEBRA® connectors can be found in most product types of this nature, and continue to gain wider acceptance as product packages decrease in size. Since each style consists of integral conductors, insulators and selfsupport structures, there is generally no added componentry required for installation – thus a very important by-product of hardware and installation cost-effectiveness can be realized.

AS EASY AS 1...2...3: Using ZEBRA® elastomeric electronic connectors requires only a brief orientation in order to assure that the components provide the finest performance possible. The basic design steps consist of:

Pressure type contact eliminates lead straightening, hole drilling and soldering. NON-ABRASIVE CONTACTS (Zero insertion force) Contact to the LCD is made by deflecting the ZEBRA® connector between the LCD and PC board. ZEBRA® connectors are non-abrasive and will not damage indium oxide contact pads on the LCD. Repeated assembly and disassembly of package components will not affect performance.

The LCD, when mounted with a ZEBRA® rubber connector, creates a gas tight seal at the contact interface. Assures contact in chemically corrosive atmospheres while at the same time protecting the glass display from shock and vibrations.

With a ZEBRA® connector, LCD terminal overhangs can be as narrow as 0.030”/8mm permitting more efficient use of glass size related to character height. (Metal pins normally require a 0.150”/3.9mm glass overhang, reducing character height by as much as 0.240”/6.1mm for a dual in-line LCD.)

ZEBRA® connectors are available in a variety of contact densities. The most dense allows contact pad spacing as close as 0.010”/0.25mm center-to-center. This spacing can be compared to 0.050”/1.3mm minimum for pins, allowing for increased capacity of LCD formats.

The 4-pin mini-DIN that is most common in consumer products today debuted in JVC"s 1987 S-VHS. The 7-pin mini-DIN is commonly used on laptops. Used with PAL, NTSC or SECAM color. Where two connectors are used, they are labeled Chroma and Luma.

The VGA connector was Introduced with IBM x86 machines, but became a universal analog display interface. Display Data Channel was later added to allow monitors to identify themselves to graphic cards, and graphic cards to modify monitor settings.

Successor analog protocols include SVGA, XGA, etc. DVI is a more modern digital alternative. Where BNC is used, available as 3 connectors with Sync on Green, or 5 connector Red / Green / Blue / Horizontal Sync / Vertical sync.

Television antenna connection for most video devices outside North America. Used by early home computers and game consoles to connect them to TVs because of the lack of any other connector.

Used for most North American TV antenna connections, as well as satellite and cable systems worldwide. Also common in North America for early home computers and game consoles, older VCRs, RF modulators, and even CECBs due to lack of other connectors.

Used for older TV antenna installations in the US and various other countries worldwide. Current use generally limited to baluns to adapt 300 Ω twin-lead to/from 75 Ω F connector.

The historical connector used by MDA, EGA and CGA graphic cards is a female nine-pin D-subminiature (DE-9). The signal standard and pinout are backward-compatible with CGA, allowing EGA monitors to be used on CGA cards and vice versa.

Became a nearly ubiquitous analog computer display connector after first being introduced with IBM x86 machines. Older VGA connectors were DE-9 (9-pin). The modern DE-15 connector can carry Display Data Channel to allow the monitor to communicate with the graphics card, and optionally vice versa.

Used for all analog audio and video out on for the PlayStation, PlayStation 2 and PlayStation 3 video game consoles. (A few early original PlayStation models featured RCA outs for composite video and stereo analog audio in addition to the AV Multi connector.)

VESA Enhanced Video Connector and VESA Plug and Display (a.k.a. M1-DA) both used this connector with slightly different pin assignments. These schemes combined VGA or digital video, audio, FireWire, and USB signals into a single connector.

Proprietary connector used on Apple Macintosh Centris computers, and the Apple AudioVision 14 Display. An attempt by Apple to deal with cable clutter, by combining five separate cables from computer to monitor.

Used for transmission of uncompressed high-definition video, audio, Ethernet, high-power over cable and various controls, via a 100 m Cat5e/Cat6 cable with 8P8C modular connectors of the type commonly used for telephone and Ethernet LAN connections.

List of computer video standards and connectors pinouts Wiki format (including community updates and free redistribution); broad coverage including HDMI

A computer port is also called as a Communication Port as it is responsible for communication between the computer and its peripheral device. Generally, the female end of the connector is referred to as a port and it usually sits on the motherboard.

In Computers, communication ports can be divided into two types based on the type or protocol used for communication. They are Serial Ports and Parallel Ports.

A serial port is an interface through which peripherals can be connected using a serial protocol which involves the transmission of data one bit at a time over a single communication line. The most common type of serial port is a D-Subminiature or a D-sub connector that carry RS-232 signals.

PS/2 connector is developed by IBM for connecting mouse and keyboard. It was introduced with IBM’s Personal Systems/2 series of computers and hence the name PS/2 connector. PS/2 connectors are color coded as purple for keyboard and green for mouse.

Even though the communication in PS/2 and USB is serial, technically, the term Serial Port is used to refer the interface that is compliant to RS-232 standard. There are two types of serial ports that are commonly found on a computer: DB-25 and DE-9.

DB-25 is a variant of D-sub connector and is the original port for RS-232 serial communication. They were developed as the main port for serial connections using RS-232 protocol but most of the applications did not require all the pins.

Hence, DE-9 was developed for RS-232 based serial communication while DB-25 was rarely used as a serial port and often used as a parallel printer port as a replacement of the Centronics Parallel 36 pin connector.

DE-9 is the main port for RS-232 serial communication. It is a D-sub connector with E shell and is often miscalled as DB-9. A DE-9 port is also called as a COM port and allows full duplex serial communication between the computer and it’s peripheral.

Audio ports are used to connect speakers or other audio output devices with the computer. The audio signals can be either analogue or digital and depending on that the port and its corresponding connector differ.

It is the most commonly found audio port that can be used to connect stereo headphones or surround sound channels. A 6 connector system is included on majority of computers for audio out as well as a microphone connection.

The 6 connectors are color coded as Blue, Lime, Pink, Orange, Black and Grey. These 6 connectors can be used for a surround sound configuration of up to 8 channels.

The Sony/Phillips Digital Interface Format (S/PDIF) is an audio interconnect used in home media. It supports digital audio and can be transmitted using a coaxial RCA Audio cable or an optical fiber TOSLINK connector.

VGA port is found in many computers, projectors, video cards and High Definition TVs. It is a D-sub connector consisting of 15 pins in 3 rows. The connector is called as DE-15.

VGA port is the main interface between computers and older CRT monitors. Even the modern LCD and LED monitors support VGA ports but the picture quality is reduced. VGA carries analogue video signals up to a resolution of 648X480.

There are three types of DVI connectors based on the signals it can carry: DVI-I, DVI-D and DVI-A. DVI-I is a DVI port with integrated analogue and digital signals. DVI-D supports only digital signals and DVI-A supports only analogue signals.

The digital signals can be either single link or dual link where a single link supports a digital signal up to 1920X1080 resolution and a dual link supports a digital signal up to 2560X1600 resolution. The following image compares the structures of DVI-I, DVI-D and DVI-A types along with the pinouts.

The Display Port has a 20 pin connector, which is a very less number when compared to DVI port and offers better resolution. The pin out diagram of a Display Port is shown below.

Apple introduced a miniature version of DisplayPort and called it Mini DisplayPort (mDP or Mini DP). Even though Mini DisplayPort has 20 pins, the physical size of the connector is smaller than a regular DisplayPort and the pin out is also different.

RCA Connector can carry composite video and stereo audio signals over three cables. Composite video transmits analogue video signals and the connector is as yellow colored RCA connector.

Like composite video, component video transmits only video signals and two separate connectors must be used for stereo audio. Component video port can transmit both analogue and digital video signals.

S-Video or Separate Video connector is used for transmitting only video signals. The picture quality is better than that of Composite video but has a lesser resolution than Component video.

The HDMI connector consists of 19 pins and the latest version of HDMI i.e. HDMI 2.0 can carry digital video signal up to a resolution of 4096×2160 and 32 audio channels. The pinout diagram of an HDMI port is as follows.

With HDMI 1.3 Version, a new HDMI Port and Connector combination is released called the Mini HDMI. Physically, it is smaller than a regular HDMI Port but has same 19 Pin. Intended for portable devices like laptops, cameras, camcorders, the Mini HDMI Port isn’t that popular.

HDMI developers introduced a new HDMI Connector and Port called Micro HDMI with HDMI Version 1.4. Micro HDMI also has 19 pins (just like regular HDMI and Mini HDMI) but the pinout is different.

USB Type-A port is a 4 pin connector. There are different versions of Type – A USB ports: USB 1.1, USB 2.0 and USB 3.0. USB 3.0 is the common standard and supports a data rate of 400MBps.

USB Type – C is the latest specification of the USB and is a reversible connector. USB Type – C is supposed to replace Types A and B and is considered future proof.

The interface that is used for computer networking and telecommunications is known as Registered Jack (RJ) and RJ – 45 port in particular is used for Ethernet over cable. RJ-45 connector is an 8 pin – 8 contact (8P – 8C) type modular connector.

The latest Ethernet technology is called Gigabit Ethernet and supports a data transfer rate of over 10Gigabits per second. The Ethernet or a LAN port with 8P – 8C type connector along with the male RJ-45 cable is shown below.

The un-keyed 8P – 8C modular connector is generally referred to the Ethernet RJ-45. Often, RJ-45 ports are equipped with two LEDs for indicating transmission and packet detection.

RJ-45 and RJ11 ports look alike but RJ-11 is a smaller port and uses a 6 point – 4 contact (6P – 4C) connector even though a 6 point – 2 contact (6P – 2C) is sufficient. The following is a picture of an RJ-11 port and its compatible connector.

e-SATA is an external Serial AT Attachment connector that is used as an interface for connecting external mass storage devices. Modern e-SATA connector are called e-SATAp and stands for Power e-SATA ports.

We outline the different types of connections below and give you different usage scenarios to help you decide. We"ll also outline the best connection and cable to choose for 144Hz and other higher refresh rate displays.

DVI stands for "Digital Visual Interface", and is another common connection found on PC monitors. Things can become a little confusing when you consider there are three different types of DVI. There’s DVI-A (analog signal), DVI-D (digital signal) and DVI-I (integrated analog and digital signal). Not only that, but DVI-D and DVI-I have single-link and dual-link versions. Nowadays, DVI-A is very uncommon, as it’s no better than VGA.

The differences between single-link and dual-link refer to how much bandwidth the cable can carry. A single-link DVI-D or DVI-I cable can carry 3.96 Gbit/s, which tops out at 1,920 x 1,200 resolution. Dual-link, on the other hand, physically has extra pins on the connectors, allowing a maximum bandwidth of 7.92 Gbit/s and 2,560 x 1,600 resolution. Although DVI is still a common connection, it’s becoming dated, so if you want to output a very high resolution you’ll need to use HDMI or DisplayPort instead.

With the release of the 2016 MacBook, Apple pushed the boat out and replaced all of its laptop"s connections with the USB Type-C connector. USB Type-C has been making a greater appearance within monitors, such as the Philips Brilliance 258B6QUEB that we reviewed, that has a USB Type-C input, making it the perfect companion for the 2016 MacBook.

What really makes the USC Type-C connector popular is its fully reversible plug, cross-platform compatibility (with new smartphones, tablet, laptops and computers), and its ability to not only output video, but also to transmit audio, data and power. This makes it an extremely versatile video cable, and we expect to see a lot more using it in the coming years.

This new interface is designed to work along side of the proprietary digital visual interface (DVI) used between the personal computer and an external display, as well as the legacy low-voltage differential signaling (LVDS) interface used inside laptops, monitors, and TVs to connect to LCD panels. As DisplayPort becomes more readily available, eventually it replaces VGA, DVI, and LVDS as the display interface standard.

Technology evolves every day. New and improved devices, formats, and media types seem to pop up every day, too. Keeping up with it all can be a full-time job. Monitor ports are the hidden masterpieces that maximize the output of our evolving devices and media.

Today, video connectors and monitor ports are designed to be the ultimate solution. They are highly versatile in their connectivity and many serve multiple functions simultaneously.

The USB-C is a 24-pin USB connector system that was developed by the USB Implementors Forum in 2014. Since then it became the industry standard connector to transmit data and power. It may be quite compact, but it is incredibly powerful, boasting an array of highly advanced features.

The USB-C is known as the all-in-one connector. It is a one-cable solution with the ability to transmit power, audio, and video across a single cable from one mighty port.

And with this connector, enjoy its reversible orientation. This feature promotes ease of use and eliminates the need for multiple ports and cables. It also lets you easily connect the cable into the connector correctly the first time – no more struggling to find the correct orientation.

With the addition of the Thunderbolt hardware interface, the already high-performing USB-C offers even greater speed. It is now the most versatile and powerful connector in today’s market. Compatible with any dock, display, or data device, Thunderbolt brings USB-C speeds up to 40Gb per second – 8x faster than the ports available on most computers today. Besides, it significantly increases USB-C power and image quality, allowing it to hold 8x as much data, and boosts image quality to 4x the bandwidth.

Capable of carrying signals with the use of inexpensive cables, and very user-friendly, HDMI has been a popular choice among interface connectors. It is now the standard for plugging a computer into a TV monitor.

Capable of carrying signals at resolutions as high as 2560 x 1600, it helped maximize the digital quality of flatscreen LCD monitors and modern video graphics cards. It has been a top choice for HDTVs and other high-end video displays for TV, movies, and DVDs, while also supporting both computer monitors and projectors. In recent years, DVI has become the standard digital interface for the computer market.

If the motherboard is indeed dead, you can easily remove the connector that you want to salvage by using a product known as "Chip Quik". This is a low-temperature solder alloy that is specifically designed to contaminate the existing solder on the board so as to reduce the melt temperature to a very low value.

Note that you don"t need a hot-air rework station to use this product - a standard soldering iron is all that you need. The contaminated solder remains molten for a very long time and you simply float the connector off the board.

After you have removed the connector that you are salvaging, simply flood the connector pins with regular solder so as to wash off the low-temp alloy. The connector should be completely usable.