electric bike c800 tft display settings price

Even though you can see onlysix (6) main readings on the display, there isfourteen (14) usable functionsyou can access and adjust based on your needs.

Po2 – Km or miles per hour:depending on your location, you can select to display the speed in km (“0” ) or mph (“1”). For this to work properly, you need to set the size of your ebike wheels.

Po4 – Display sleep mode:this come from zero to 60 mins. In this case, zero means your controller will stay on all the time and if 60 mins, it will shut down after 1 hr of no operation (this will not happen if you are riding your electric bike though).

P06 – Wheel size selection:this is where you establish the size of your wheels in inchs. This is important in order to display the right speed you are traveling.

*P07 – Speed measuring magnet:this element will be factory calibrated so better not to mess with it. Basically, based on the assistance mode you select and speed limit, it will tell the controller if the motor is delivering the right assistance and therefore if the battery is delivering the correct voltage. This is very important in order to indicate the controller to deactivate the motor if you reach your set speed limit. Ask your trusted bike shop what would be the right setting if you change the ebike motor.

Options0and1indicate how much electric assist each grade will provide from the battery while pedaling and will affect the pedaling speed accordingly. For example, in option 0 the grade 2 will assist you with 3v while it is 2.5v in option 1.