brother printer lcd screen replacement price

Check this page from printcopy.info to see all the parts you might need. The referenced part above appears to be the Touch Panel Assembly only, and there is an LCD also just in case your LCD is cracked too.

Verify the power cord is connected to the back of the machine and the AC power outlet. If the power cord is connected to a surge protector or power switch, remove the cord from the device and connect it directly to the outlet. This is for testing purposes. Removing the device assists in determining if the issue is related to the device or the Brother machine.

Verify the machine is powered ON. The Brother machine has an ON/OFF button located on control panel of the machine. If machine is OFF, the display will be blank.

If the display is still blank, try to tilt or move up or down the LCD display and also try a different known working electrical outlet at your location.

Depending on the severity of the issue, you may not be able to calibrate the touchscreen. If you are unable to perform STEPS 1 through 5 due to the panel not working, refer to WARRANTY AND SERVICE OPTIONS listed below.

- If the LCD displayed the message "ERROR", the screen will automatically return to display the 5 numbered dots. Go back to "OK" is displayed on the LCD.

8. Test the touchscreen. You can try pressing different options displayed on the touchscreen or repeating the procedure you were performing when you noticed the issue.

If the problem continues your machine may require service. Locate a Brother Authorized Service Center (ASC) in your area by clicking on the link below:

This screen shows the machine’s status when the machine is idle. When displayed, it indicates that your machine is ready for the next command. Date & Time

New information from Brother appears in the information bar when the notification settings such as [Message from Brother] and [Firmware Auto Check] are set to [On].

The Brother MFC-790CW Color AiO with 4.2-Inch TouchScreen Color LCD Display and Wireless Interface prints, copies, scans, faxes, and more in one sleek, compact device. And with built-in wireless networking, you can easily set up the printer to work with all the computers on your network in your home or office.

The MFC-790CW features a 4.2-inch touchscreen that makes it easy to navigate menus and preview faxes, as well as preview and edit photos directly without a computer. You can edit and print photos directly by using either the built-in media card slot or by connecting a PictBridge-enabled camera or USB flash memory. The media card slot supports compact flash, memory stick, memory stick pro, SD, SDHC, xD, and xD TypeM/TypeH.

The MFC-790CW prints both documents and photos at up to 6000 x 1200 dpi and can reach speeds of up to 33 ppm black and 27 ppm color. The printer has two separate trays: a 100-sheet tray for documents, and a separate 20-sheet bypass tray for 4 x 6-inch photos. The printer supports paper sizes up to legal size (8 x 14 inches) and can print borderless photos. It uses separate ink cartridges for each color, so you only replace the color that runs out.

The printer has both wired and wireless networking built in, making it simple to set up the printer to be shared by everyone in your office or home. The built-in wireless supports 802.11b/g and features one-button wireless setup for simplicity. Security standards supported include SSID, WEP 64/128-bit, WPA-PSK, and WPA2-PSK. For those without wireless, there is also a 10/100 Base-TX Ethernet port.

MFC-790CW comes with an easy-to use, intuitive and interactive wide 4.2" Touchscreen. 15-page auto document feeder is perfect for unattended faxing, copying or scanning of multi-page documents. Flexible wireless (802.11b/g) or wired (Ethernet) network connection. Fast print speeds at up to 33ppm Black/27ppm Color. Professional quality results at up to 6000 x 1200dpi resolution. Handy built-in digital answering machine, full-duplex speaker phone and handset. Also, includes high speed Super G3 33.6Kbps fax modem. Direct photo printing on demand from media card slots, USB direct/PictBridge Interface. 4-ink cartridge system ¿ replace only the cartridge that needs to be replaced.

A few months later, I had some issues with the screen but Robin was quick to take a look at the issue and make things working again. I"m highly satisfied and recommend coming here for repairs."

Return is a scheme provided by us directly under this policy in terms of which the option of replacement and/or refund is offered to you. All products listed under a particular category may not have the same returns policy.

To start a return, you can contact us at info@printerpartspoint.com. If your return is accepted, we’ll send you a return shipping label, as well as for instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.