adafruit tft lcd display model 1480 manufacturer
The 2.2" display has 320x240 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ILI9340 or compatible) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.
As Cornell Electrical and Computer Engineering professor Bruce Landdescribes it in this write-up, the Adafruit TFT Display Model 1480 is a 320x240 color LCD screen with 18-bit color specification. While that doesn’t sound particularly interesting by itself, when combined with a PIC32, graphics library ported bySyed Tahmid Mahbub, and using its SPI interface, it can reveal some very interesting patterns.
The first on display is a diffusion-limited aggregation routine, which “builds complicated structures from particles based on random diffusion of sticky particles.” What this means visually is that a random tree-like structure is built by what appears to be a cloud of pixel-snow, bouncing around until it finds a place to rest. The routine is handled by aMicrochipPIC32MX250 running at 40 MHz, and connected to the screen via an “ECE 4760 Dev Board V2.”
The Adafruit TFT FeatherWing has a touch screen display on the front and a socket for any Feather on the back, including the Particle Argon, Boron, and Xenon. You can find technical information at Adafruit.
To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder Adafruit_ILI9341. Check that the Adafruit_ILI9341 folder contains Adafruit_ILI9341.cpp and Adafruit_ILI9341.
Place the Adafruit_ILI9341 library folder your arduinosketchfolder/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE
LCD displays and breakout boards for Arduino, Raspberry Pi, Grove and Featherboard. Our range includes 16x2 to 20x4 monochrome LCD displays, 1.8" to 2.8" 18-bit colour displays and the really impressive looking 8" full HDMI LCD display! With the majority of the boards coming pre-soldered it makes them easy to add into any project where you want visual output.
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
The 2.2" display has 320x240 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ILI9340) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so theres no worries that your code will not work from one to the other.
The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included.
Of course, we wouldnt just leave you with a datasheet and a "good luck!" - weve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code. The code is written for Arduino but can be easily ported to your favorite microcontroller! Wiring is easy, we strongly encourage using the hardware SPI pins of your Arduino as software SPI is noticeably slower when dealing with this size display. Check the example sketches for wiring help until we get a detailed wiring tutorial written!
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4 wire SPI to communicate and has its own pixel addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available.
"The 2.2 inch display has 320x240 color pixels. Unlike the low cost "Nokia 6110 and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT. The TFT driver (ILI9340 or compatible) can display full 18 bit color (262,144 shades.). And the LCD will always come with the same driver chip so there & # 39; s no worries that your code will not work from one to the other.
The breakout has the TFT display soldered on (it uses a delicate flex circuit connector) as well as a ultra low dropout 3.3 V regulator and a 3/5 V level shifter so you can use it with 3.3 V or 5 V power and logic. We also had a little space so we placed a microSD card holder so you can easily load Full Color bitmaps from a FAT16/FAT32 formatted MicroSD card. The microSD card is not included, but you can pick one up here.
"Of course, we wouldn & # 39; t just leave you with a datasheet and a good luck. – we & # 39; ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code. The code is written for arduino but can be easily ported to your favorite microcontroller. Wiring is easy, we strongly encourage using the hardware SPI pins of your Arduino as software SPI is noticeably slower when dealing with this size display. Check the example sketches for wiring a set until we get detailed wiring tutorial written.
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
The 2.2" display has 320x240 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ILI9340 or compatible) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.
The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included.
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
The 2.2" display has 320x240 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ILI9340) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.
The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included.
Of course, Adafruit wouldn"t just leave you with a datasheet and a "good luck!" - they"ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code. The code is written for Arduino but can be easily ported to your favorite microcontroller! Wiring is easy, we strongly encourage using the hardware SPI pins of your Arduino as software SPI is noticeably slower when dealing with this size display. Check the example sketches for wiring help until they get a detailed wiring tutorial written!
To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder Adafruit_ILI9341. Check that the Adafruit_ILI9341 folder contains Adafruit_ILI9341.cpp and Adafruit_ILI9341.
Place the Adafruit_ILI9341 library folder your arduinosketchfolder/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE
We use our internationally recognized delivery partners UPS/DHL. Collection of ET10103581 can also be arranged for the customer by international shipments through contacting our customer support team. Additionally, you can also search "Adafruit Industries LLC" products on our website by using Enrgtech"s Unique Manufacturing Part Number ET10103581.