lcd panel has a horizontal line across it free sample

TV screen lines are an irritating occurrence, and many different issues with the TV can cause them. This article will go over what causes this, whether or not you can fix it depending on the cause, and how to fix it.

When any part of a TV"s display gets damaged, corrupted, or is defective, it can cause lines to appear on the screen. Some TV parts that can cause horizontal lines to appear are the LCD panel, T-Con board, or row drivers.

Issues with these parts can happen for many reasons, and the way your lines appear can tell you a lot about what"s wrong. If the lines are new, one of these parts was likely damaged.

If you"re seeing colored horizontal lines, it may be because of the T-Con board. If other parts don"t seem to be an issue, this part of the TV could be causing the lines.

If lines appear on your TV, you"ll want to inspect the TV itself. You can fix some issues that cause lines to appear, but others may require a professional or a new TV altogether. Some of the most common causes of horizontal lines are:

LCD screen damage. The LCD provides your TV display with light. If you"re handy, you might be able to fix this by doing a little work with the insides of the TV, which you can read about below.

Other devices you"ve connected to the TV. They may also be having issues of their own or might not be compatible with your TV. In this case, you"ll have to inspect the device instead of the TV.

All these issues can be fixed, though it ranges in difficulty. If you"re unsure how to repair your TV, you may want to get the TV professionally repaired.

Knock or tap on the back of your TV. If the issue is with cable connections, this could solve the problem. It could also indicate a problem with your T-Con board. It won"t fix the issue, and the lines may reappear, but it can give some insight into the problem. If it"s your T-Con board, you"ll want to have T-Con replaced.

Change your TV"s settings. This step might work for you if the issue isn"t because of damage. First, try switching the TV input from different HDMI ports or AV ports. Doing this can rule out problems with specific inputs.

Run a picture test on your TV. It"s a built-in feature on newer TV"s which allows you to see if the TV display is corrupted. Doing this may look different depending on your TV, but generally, you can go into the settings and find a support option or just a picture test option.

Take a look at the LCD screen. If it"s damaged, you may want to get the screen repaired or replaced. It may be a less costly option than buying a new TV altogether.

Vertical lines on a TV appear for the same reasons as horizontal lines: loose cables and wires, screen damage, or a faulty T-Con board. Leaving the TV turned on for too long can also cause vertical lines.

The steps for fixing lines on your TV will also work to fix TV glitches like flicker and stutter. For example, check the cables and connectors and ensure there"s no issue with your input device.

If your TV screen looks blue, it could be faulty connections, a defective backlight, or incorrect color settings. Some LED TVs naturally have a blue tint, which you can offset by changing the color temperature.

To fix screen burn on a TV, adjust the brightness settings and enable pixel-shift. Sometimes playing a colorful video with fast-moving action for half an hour might help.

Here are 3 fixes that have helped other users resolve the horizontal lines on laptop screen issue. You may not have to try all of them; just work your way down the list until the problem is resolved.

This problem may occur if you are using the wrong graphics driver or its out of date. So you should update your graphics driver to see if it fixes your problem. If you don’t have the time, patience or skills to update the driver manually, you can do it automatically with Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. Driver Easy handles it all.

You can update your drivers automatically with either Free or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

3) Click Update All to automatically download and install the correct version of ALL the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

4) Restart your computer and see if the horizontal lines on screen issue has been fixed. If yes, then great! But if the problem persists, move on to Fix 2, below.

If the fixes above didn’t help with the problem, then it’s most likely a hardware problem. You can power off the computer and then gently wipe across the screen with cotton balls. Be sure to proceed with caution so as not to cause any further damage to your laptop.

That’s it – three fixes for you to fix the horizontal line on laptop screen issue. Have you resolved the problem successfully? Please let us know in the comments. Thanks for reading!

On the other hand, they often get hardware related problems in their Smart TV. For example, they require fixing the horizontal lines on the TV screen. It is the right time to know about the main causes horizontal lines on TV screen and start a step to fix such problem.

There are two thin layers of the glass containing high-quality liquid crystal material between such layers in the LCD display screens on the TVs, monitors and notebooks.

If such glass becomes damaged over time or because of any accident, then the debris infiltrates the liquid crystal layer and causes the color’s vertical lines appear when the entire monitor is illuminated. These lines are temporary because the faulty display connections and permanent due to the internal failure.

Horizontal, vertical, jagged and diagonal lines on the LCD screen indicate the panel damage.  If you get a single set of horizontal lines across TV screen in recent times, then there is damage in the internal part, a loose internal video cable or a graphics system failure.

All broken signals from graphics hardware or cables make impurities in the reproduction of the image on the screen. You can contact the company specialized in the TV screen repair services and get the customized yet affordable service to get your TV screen back in a good condition.

Individuals who experience the TV screen has horizontal lines these days focus on DIY projects to repair TV screen problems. On the other hand, they can contact the company specialized in and also recommended for the TV Screen repair and replacement services.

This is because they get enough guidance to know about the main cause of the horizontal lines in their TV screen and use the professional service to fix the problem in the TV screen.

Everyone has different expectations about how to improve their entertainment time. If they like to watch TV shows and movies at home, then they require the best-in-class TV with high-quality screens.

Horizontal lines in TV screen caused by internal part damages must be quickly fixed so that you can watch your favourite programs from the comfort of your living room. You can prefer and use the professional service recommended for repairing the TV screen problems.

Ours is a Sony Bravia that is now over 10 years old. Several months ago we started noticing lines, especially on the left (our left) side of the screen. They’d go away after the tv warmed up. Then we started noticing it was darker on that side of the screen, but again, after the tv warmed up the screen would be normal. Then about two months ago it started getting worse and didn’t ever get completely better, even after the tv warmed up. So I watched some youtube videos that all talked about the ribbon cables becoming loose over time and to apply pressure along the top and see if that made it better, and if so, it was a loose cable and if you put electrical tape or something that would help keep the pressure, it would fix the problem. Hubby pressed along the top and sure enough, when he pressed in one spot on the left side suddenly the picture cleared up. Stayed good for about a week, then problems again, pressed again, fixed again. A week or so later, same problem, but this time when he pressed on it nothing got better.

So I decided to take the cover off and look at it better. As I was pressing on the tops of the ribbon cables that run down from the top of the frame, for a minute it got better but then suddenly there was a wide white vertical line, with a thin green one down the center of it, running down the front of the screen, and it was perfectly aligned with one of the cables. So now I still have the dark side of the screen, and some ghosting, and some lines, but now this bright white streak/line right down the front. Another weird thing is that if the whole screen is bright (like watching a show set in a snowy place) then the darkness even on the left side is basically gone, but if the scene is dark at all, that side is almost black. I don’t know if it means that particular ribbon cable is bad, or if something is loose, if things need to be replaced or what. It’s very frustrating as it’s been a great tv. Hubby wants to just buy a new one, but even if he does I would still like to try and figure out this one as it could then go in another room.

This problem occurs because of a hardware limitation that is known as "tearing." Tearing is a video artifact in which the top portion of the screen shows a different frame of video than the bottom portion. This is more noticeable during scenes that contain fast motion. There may be a noticeable horizontal line at the point where the two frames meet.

When it is playing video content such as a DVD, the operating system has to synchronize playback with the display redraw rate. The video frame is updated during the vertical blanking interval so that the complete, correct frame will be displayed without any tearing every time that the video card refreshes the monitor.

When windows synchronizes DVD playback with the monitor refresh rate, it synchronizes with the timing of the primary monitor. This is determined by the video driver. Some video hardware supports multiple monitors but does not synchronize the display redraw timing of the two monitors. Even though the two monitors are configured for the same refresh rate (for example, 60 Hz), the second monitor may not be refreshed at the same time. In this case, there may be unavoidable tearing on the second monitor.Resolution

If the computer system meets the hardware and software requirements to run Windows Aero, you may be able to reduce or eliminate the problem by enabling Aero. Otherwise, set the display to PC Only or Extended. For more information about Aero, go to the following Microsoft website:

If your computer does not meet the requirements for Aero, set the display to PC Only or Extended. For information about how to change this setting, go to the following Microsoft website:

If you experience noticeable cut lines or tearing, and not only when you play a DVD movie, the display may be configured to a refresh rate that one of your monitors does not support. If this is the case, you can resolve the issue by configuring the display to a refresh rate that is supported by all monitors.

Select a resolution and refresh rate that is supported by all monitors. (Your monitors may support multiple refresh rates. See your manufacturer"s documentation for information about the settings that your monitor supports.)

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

In a laptop, the screen is connected using an LVDS or eDP interface, and these just transfer a series of pixel for the screen over and over again, not caring about lines.

Artifacts like bright colored horizontal or vertical lines appear when either the flex cable from the LCD screen IC gets bad connection to the LCD glass or when the glass is chipped or cracked outside the visible area. Then the IC can no longer drive specific column and row conductors to the pixels and the pixels remain either lit or dark.

Another possibility is that the power supply powering the LCD module, including the LCD IC is not providing stable enough power due to deteriorated capacitors. This could explain some horizontal lines, but these lines wouldn"t be solid and would be changing depending on the screen content.

Back in April last year, Lionel blogged about a vertical line issue that could potentially affect customers who own 17" Inspiron 9200, 9300, and XPS Gen 2 notebook LCDs.

After engaging our engineering and product group teams, as well as the LCD manufacturer, to investigate and isolate the cause of this issue, we narrowed the problem down to a specific part within a certain date range. During that research, we found that the part may also affect the Inspiron 6000, 8600, Latitude D800, D810, and Precision Mobile Workstation M60 and M70 LCDs. That led to Lionel"s second blog post on the topic.

We"ve taken steps to contact those who may be affected to offer a warranty replacement and also put in place measures to rectify any out of pocket expense incurred by out of warranty customers who replaced the affected screens in the past.

Since then, comments have hit our forums and blog site about other potentially affected systems and possible causes and fixes for them. We"ve gone back to our engineering and product group teams and verified that the part causing this issue:

That said, there are other variables that can lead to vertical and horizontal lines on other system types regardless of size or model. Lines on an LCD can appear sporadically, at random places on the screen, and for what appears to be for no reason at all. These lines can be caused by normal LCD failures brought on by a multitude of variables, which I"ll try to cover here. Vertical lines tend to be a more common issue in notebooks, primarily because they are subjected to more wear and tear on a daily basis than a desktop LCD.

The most common cause of these lines is simply a loose connection. As notebook systems are carried around, no matter how careful we try to be, they have a tendency to be bumped, jarred, and even sometimes the heart stopping drop. Though today"s notebooks are designed to better absorb and dissipate small shocks, it can still have adverse affects on the notebook"s internal components. A good bump or series of bumps and random movements can cause the LCD cable to become loose. The connection remains intact, but some breaks in the signal can lead to impurities in the reproduction of the image on the screen. Think of a loosely-fastened garden hose… water will still be directed and outputted through the end of the hose, but some water is lost at the connection. This is easily fixed by tightening the hose. Similarly, the LCD can usually be fixed by simply making sure the connection is secure. (Service manuals for Dell systems can be found here on support.dell.com.)

A golden rule of any seasoned technician when it comes to cable connections: don"t just check the connection, reseat it. This applies to more then just cable connections (memory, wireless cards, hard drives, optical drives, etc…) There are a few reasons for this, the first being temperature. With so many components designed into such a small case, heat is inevitable. These temperature variations can lead to things like "chip creep" and oxidation. Removing the cable and firmly, but carefully reseating it should solve this problem by not only making sure that the connection is properly seated, but also that the pins are free from oxidation.

The second reason is debris. If you"ve ever opened up your notebook to clean the keyboard or for maintenance, you might see any number of things such as food particles, hair, paper, dirt and dust. Some of these objects are small enough to get into the connections and cause problems. This is one of the reasons that regular cleaning of your notebook and desktop PCs should be done. The problems caused by debris can usually be quickly cleared up by a can of compressed air and a little time and effort.

If these simple fixes don"t seem to work, then we need to look at the actual failure possibilities. Vertical or horizontal lines that don"t disappear after the basic troubleshooting are usually caused by circumstantial failures. The most common type of failure that leads to lines on the display is an open circuit connection between the driver IC (flexible circuit board) and LCD glass. This is usually caused by external stresses (mechanical, thermal, etc…), which causes the flex circuit to detach from the glass. The variables leading to the detachment are wide and are dependant on individual cases. With the amount of travel and various operating environments of a notebook, pinpointing the exact cause can be near impossible, unless of course the problem immediately follows a catastrophic event such as dropping the notebook or prolonged exposure to heat or cold, such as leaving the system in a car.

Investigations into technical problems, including which systems, batches, and date ranges are affected, are rigorous, and we strive for accuracy. Unfortunately, not every technical problem can be traced down to the root cause. But in every case, we try to proceed appropriately and in all fairness to affected customers.

If you are experiencing any problem with lines on your LCD and your system is not one of the potentially affected units, or in the date range outlined in Lionel"s earlier posts, please contact technical support to troubleshoot and identify possible fixes. See below for details on how to do that.

When any part of a TV’s display gets damaged, corrupted, or is defective, it can cause lines to appear on the screen. Some TV parts that can cause horizontal lines to appear are the LCD panel, T-Con board, or row drivers.

Repairing horizontal lines on your TV costs between $150 and $400. It might be an issue with the motherboard, or it could be a problem with loose cables between the panel and the control board. To fix this issue, the television needs to be opened up and analyzed by a professional repairman.

If your flat screen TV has the dreaded vertical lines, half of the screen has turned darker, the screen is cracked, or the screen is broken, this can be repaired but may cost more than you paid for the complete TV. If your screen is cracked or broken, you can try replacing the Screen, LCD, Plasma, or LED part.

A horizontal line is one that goes from left to right across the page. This is because horizontal lines are parallel to the horizon. This fact can help children to remember the meaning of horizontal lines.

It is worth it to repair your TV if the cost of the repair is significantly cheaper than the cost of buying a new TV. The most expensive repair for a flat-screen TV is usually a cracked screen — this repair tends to cost more than a replacement TV for all but the largest screen sizes.

On the average flat-screen TV, repair of a cracked screen is one of the highest-cost repairs. Usually, on all but the biggest screens, it is more than the cost of a replacement TV. The screen of a larger TV costs more to replace, but the TVs themselves are higher-priced as well, so it may still work to your advantage.

The average lifespan of a television varies between 4 and 10 years (approximately 40,000 – 100,000 hours) depending on usage and maintenance. Turning off your TV is one of the simplest things you can do to extend its lifespan.

A horizontal line is a straight line that goes from left to right or right to left. In coordinate geometry, a line is said to be horizontal if two points on the line have the same Y- coordinate points. It comes from the term “horizon”. It means that the horizontal lines are always parallel to the horizon or the x-axis.

A sleeping line is nothing but a horizontal line. A ladder lying flat is the same as a ladder lying horizontally. A man lying flat on the floor is the same as a man lying horizontally on the floor. Horizontal is the opposite of vertical.

The ants are not 1 or 2 but they were in quite good nos.Its takes me whole day to get them out of my laptop.First I didnt knew it was ant inside the laptop but when I started my laptop in rutine suddenly to my surprise vertical colour lining comes on screen nothing else.

I called compaq autorised service center & told about the probelm they said that screen is gone bad & display panel should be replaced(they havent shown the laptop) which will cost about 700-750 USD.So I decided to take to local tech.

Next day I shown to laptop tech who is servicing compaq laptop.He said display cable need to be changed.I agreed & he gave me quotation(150 USD).But after 15 days long time he called me & said he was unable to get the same model cable so he cant get it done.

Then I show to 2nd tech(repairing all branded laptop).he diagnosis it in 5-6 hours & told me that he has checked display screen & display cable by replacing with same model laptop & it found absolutely ok.He told me that there is problem with only inverter & nothing else,he also told me that he has cleaned the inverter card by sweeping ant who burns off in that card.I asked him to install inverter but he said it will takes time to get the same model(Evo N160) inverter to work.Its been 1 month now till didnt get any reply from him.

Then I shown to 3rd tech.I first told him about diagnosis made by 2nd tech & also told him does he have that inverter avaliable with him than only I will give him for repair.He said he will try other model inverter & it probably should work.I gave him a laptop & after 4-5 days he told me that he has checked the inverter on other model & it works perfect.He told me that there was an short circuit in display cable which he has repaired & now there is problem in display IC which he is not getting.(I received laptop with loose screen fitting comfirmed that he has opened screen)He said he will call as soon as he get it..its been 15 days now he didnt called up.

Atlast I shown to authorised HP-compaq service center.The guy checked laptop with external vga(I didnt think he has opened the laptop) for 5 hours & said that the whole screen need to be changed.I told him about the diagnosis made by other tech before him.He said if there is problem in motherboard or display cable the external vga wouldnt work.(Is it right?).I asked him for quotation & today only he gave me quotation of 550 USD including labour charges,Also described in quotation that if they found any other parts to be replaced at the time of repair they will give another quotation.

Now as you mentioned about ebay I have already placed a bid on motherboard of Evo 160(35 USD) though seller not giving any warranty or guarantee that it will work.but I have in my mind that if I get only working display IC from it to get my problem solved.(Please advice if I should purchase the motherboard or not).

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The term ‘flat screen’ applies to a wide range of TV types, from LCDs to the latest 4K and Smart models. A flat screen means the TV’s screen surface is flat rather than convex like older models. There can be several different types of flat-screen TVs, from older LCD to the newest Smart and 4K TVs. The type impacts the repair costs because more advanced and expensive TVs have more costly components to replace or fix. In addition, some TV repairs may not always be possible on that type. For example, it is not possible to replace the screen on a plasma TV if it cracks and begins to leak. The table below shows common television types and average repair costs for each:

Repairs for LCD TVs cost between $60 and $400. LCD televisions are one of the most popular options on the market, available in a wide range of sizes and styles. They use an LCD (liquid crystal display) with backlights to produce images. The backlights, screen, and other components may get damaged over time and need repairing.

LED TV repairs range from $60 to $400, depending on the scale of the problem. LED televisions are a specific type of LCD TV that use LED backlights to illuminate the liquid crystal display. These TVs usually produce more colorful and vibrant images and are more energy-efficient, but the LED backlights may need to be repaired or replaced over time.

4K TV repairs range from $100 to $275. A 4K television provides some of the clearest and most detailed images because of the very high resolution of its screen, providing more engaging viewing experiences. There are different types of 4K TVs, including some that use LED and others that use OLED. Basically, a television is considered 4K if it has ultra high definition. These models can be expensive to purchase and repair, but in many cases, repairs may not be possible on these units. So, their overall repair costs may be lower simply because some repairs may not be offered.

OLED TV repairs cost between $100 and $400 on average. They are the next step up from a standard LED TV, with OLED standing for organic light-emitting diodes. OLED televisions can achieve deeper blacks and higher contrast compared to standard LED screens. However, they can be very expensive to purchase and repair.

Plasma TV repairs average $100 to $400. These televisions are made up of pixels filled with gas that light up when an electrical current is applied. They are less popular today, and most companies have stopped making them. But they can still be found in many homes and are subject to problems like screen burn and distorted colors. While some repairs on these TVs are possible, many issues cannot be repaired due to their design.

Smart TV repairs cost between $100 and $400. These TVs have Smart technology and connect with your home’s WiFi network to download updates and access apps and the internet. They are more advanced than other TVs but still have various components that can break and require repairs. Many Smart TVs can have basic components. So even though they may be more expensive to purchase, they are not necessarily the most expensive to repair. That comes down to how the television is made and what makes it Smart.

TVs are made up of various parts and components, all working together to produce lights, colors, pictures, and sounds for your entertainment. Over time, accidents may happen that damage these parts, or they might just wear down over the years through repeated use. The table below shows common TV repairs and the costs for each.

HDMI port repairs for a TV costs between $60 and $250. Sometimes, HDMI ports fall out of position and may simply need to be repositioned. In other cases, one might stop working due to a more serious fault and require technical repair work.

TV speaker repairs range from $75 to $250, depending on the type and damage done to the speaker. Faulty speakers may simply need rewiring or minor adjustments, or they could need to be cleaned or replaced, so the exact costs and amount of work vary.

Backlight repairs average $100 to $150. The backlight is what illuminates the display of your television, providing the brightness and color. It may be in the form of LED light strips or fluorescent lights, depending on which television type you have. If these lights develop a problem, a repairman must open it up and make adjustments to get them functioning again.

TV inverter repairs cost between $100 and $200 each. The inverter powers up the backlights for your television, and they can stop working if their capacitors break down. Repairs are made by fitting new capacitors in place.

Water damage repairs on a TV range from $150 to $400. In some cases, if too much water has gotten into the TV, it may be beyond repair. In less severe situations, a repairman will take the television apart, dry it out, and put it back together successfully, repairing any damaged components.

TV screen repairs cost between $200 and $400, but in many cases, repairing the screen is not possible. Since the screen is usually the most expensive part of the television and one of the most sensitive to impacts and other damage, an expert may advise you to simply buy a new television instead of having it repaired. It is worth getting a diagnosis if the screen issue is not too severe because issues like flashing pixels or distorted colors may be fixable.

TV panel repairs average $200 to $400 in some cases, but some panels cannot be repaired. For this reason, many companies do not offer panel repair. So if your television gets a crack in the panel, you may be better off buying a new unit instead.

Power board repairs cost between $200 and $400. The power supply board allows it to turn on and function, and if it breaks down in any way, it may simply stop turning on. Often, a repairman can replace some of the capacitors and make other adjustments to repair a faulty board, rather than having to replace it entirely.

In some cases, your TV components may not be able to be repaired, or it might be more cost-effective to replace them with new ones. The repair price includes the cost of new parts, plus the labor required to fit them into place and remove the broken components. While some components can be replaced, they may be extremely expensive or cost-prohibitive to do so. This is mainly in the case of panels and screens because they often contain too many parts to replace on their own. The table below shows average costs for a variety of common replacements:

Fuse replacement in a TV costs between $60 and $150 and is one of the easier replacement jobs for a repairman. Glass and ceramic fuses on your TV’s power supply board may blow in certain situations and need replacing. To replace a fuse, the repairman opens the TV to access the power panel and swaps out the fuse.

Replacing a TV capacitor is inexpensive, starting at $60 up to $200. If more than one capacitor needs replacing, it is usually less expensive to replace the entire board. Capacitors cannot be repaired, so replacement is the only option.

TV bulb replacement costs average $75 to $200. Bulbs are usually found only in older models of LCD TVs or projection TVs. They are used to illuminate the display so that the picture can be seen. Bulbs are relatively easy to replace, but the material costs are a little higher with bulbs when compared to other components, leading to varied replacement prices from model to model.

TV backlight replacements cost between $100 and $200 on average, depending on the television size and scale and the type and number of lights required. If you have LED lights, parts may be more expensive, leading to higher total costs. Usually when backlight problems occur, the bulbs or diodes are dead and need to be replaced.

Picture tube replacements range from $200 to $300 on average. Picture tubes, also known as cathode ray tubes or CRTs, are only used in older TVs. So, this is not a replacement job you need to worry about with an LED or LCD TV.

HDMI port replacement on a TV costs between $200 and $300. Damaged or broken ports may simply stop working or be incompatible with certain HDMI cables. In this case, a new port must be fitted and connected to the circuit board, requiring a couple of hours of labor.

TV motherboard replacements average $200 to $400. Often when a problem occurs with a motherboard, it needs to be completely replaced rather than repaired. The motherboard controls the TV’s functions and features, and a broken motherboard makes your television completely unusable.

TV screen replacement costs at least $400 to $1,000 and often much more. The screen is the most expensive part of a TV. So usually, the cost of replacing it is higher than just buying a new unit. In some cases, this is because the screen cannot be replaced without also replacing most of the other components, particularly for TVs like LED, LCD, or plasma. Most professional repair companies do not offer screen or panel replacement as a service.

TV panel replacement costs a minimum of $400 to $5,000 and often a lot more on some of the high-end 4K and Smart screen displays. Because the cost of a replacement panel is so high, it is usually more cost-effective to simply purchase a new television. Like the screen, this is due to the number of components involved. Therefore, most repair places will not offer panel replacement as a service.

You might not know exactly which part of your TV is broken or damaged at first. The symptoms of a broken television vary from vertical colored lines across the screen to audio issues, power problems, and even situations where the television starts normally but then turns itself off. For this reason, most repairs start with a diagnostic so that the problem can be found and a plan made for repair. For some repairs to be made, the part will need to be replaced, while in other cases, repair or replacement of that part may not be possible. The table below shows common problems and average repair costs for each.

Repairing a TV that will not turn on costs between $60 and $400 because there are many potential causes. It might be something as simple as a blown fuse, which can be replaced quite cheaply. Or, it could be a motherboard or power supply issue, which is more costly to fix.

Damaged cables on your TV can be repaired for between $75 and $200 in most cases. Over time, cables can get frayed, twisted, or broken, but professionals can cut away the damaged parts, add in new connectors and repair the damage, or simply replace the bad cables with new ones.

Expect to pay between $75 and $400 to repair a television with no sound. There are various reasons why your TV’s sound stopped working. It is most likely a fault with a speaker, which can be repaired or replaced. Or, it could be a deeper issue associated with the motherboard, which may also need fixing or replacing.

Repairs for this problem cost between $100 and $200. If your TV’s picture appears for a moment and then vanishes, it is most likely an issue with the inverter. A repairman will open it up, diagnose the issue, and decide on the most efficient solution.

Repairing vertical lines on the screen averages $150 to $400. This is usually an issue associated with your TV’s control board or motherboard, which may be damaged and need to be either repaired or replaced. It could also be caused by a loose cable, but it will need to be opened up to diagnose the issue and repair it.

Repairing horizontal lines on your TV costs between $150 and $400. It might be an issue with the motherboard, or it could be a problem with loose cables between the panel and the control board. To fix this issue, the television needs to be opened up and analyzed by a professional repairman.

Repairing a cracked TV screen costs from $400 to $1,000 or even more. Cracked screens cannot be repaired, they can only be replaced, and they are very expensive, sometimes exceeding the cost of a new TV. For this reason, if you have a cracked screen, it will probably have to be replaced entirely.

There are many different brands and companies that make TVs. Some brands specialize in certain types, while others make a wider range of products. It is common for the brand to impact the cost of repair because there may be specific issues or costs related to that brand.

While you may choose a specific brand based on the technology, cost, or resolution, keep in mind that brands may also have varying costs for repairs and the repairs types that may be available. Regardless of brand, most TV repairs fall between $60 and $400, although some repairs may be higher.

The cost to fix a Philips TV is $60 to $100. The typical issue with Philips televisions seems to be that they have a mind of their own. They turn on and off and sign in and out of apps randomly. While a solution doesn’t seem to be forthcoming, Philips is steadily losing customers due to a firmware problem.

Fixing a Sony TV will cost you about $60 to $400. This popular brand has a reputation for simply becoming disabled with no power or sound. Unfortunately, the customer service at Sony isn’t always the best. Customers are often frustrated when it comes to warranty work.

To fix your TCL TV blank screen, you should expect to pay about $60 to $400. One characteristic repair of the TCL brand is a black screen with no picture. This can be a fuse that has blown, or it may require a major change, such as a new main board.

Damaged cables can cause a TV to flicker or grow dim. Repair prices for damaged cables are $75 to $200. Samsung TV owners cite this flickering or dimming of the screen as a common issue with this brand. Sometimes the settings for the eco sensor1 or the energy-saving feature create this problem. Turning either of those off may fix the issue.

Some of the most common issues with this brand are banding at a repair cost of $100 to $200 or sound with a cost of $150 to $400. Color problems may be related to adjustment and can be fixed for a low cost of $75 to $100, HDMI connections are often fixed at the cost of $200 to $300, and streaming problems may be corrected with a software update. Software updates can be done by the owner, but a repairman will most likely charge a minimum fee of $75 to $100. Banding presents as sections of bands where it should be smooth. Sound and color can go out over time in the LG brand. HDMI and streaming can become difficult as technology emerges and changes.

Hisense TVs have a history of display difficulties and could cost you about $100 to $200. Typically, it means you need a new inverter, or it could signal the beginning of the end for your Hisense television.

Panasonic TV owners often experience the power clicking on and off and may need a new main board at the cost of $200 to $400. The reset button may help. The repairman will need to replace the motherboard of the TV if that fails.

The Vizio TV is known for its screen of death (a blank or black screen) and usually costs about $200 to $400. The problem is most often a blown motherboard, and replacement is the only option. A factory reset may be a solution. If that doesn"t work, the motherboard is the best possible answer.

Labor costs for TV repair vary depending on whether you have the television repaired in your home or drop it off at a repair center. Having someone come to your home will have higher costs than taking it to a technician.

A television repair technician has earned a career certificate or Associate’s degree in electronics technology or a related field. Expect to pay between $40 and $60 per hour in labor for someone to fix your television. Some technicians have minimum costs for some repairs, particularly if they travel to you. In this case, you may find that even if the repair only takes an hour, you may need to pay a minimum of two hours of work.

The amount of time to repair your TV depends on what the problem is and the availability of parts. Most jobs can be completed in 1 to 3 hours when the parts are on hand.

Most technicians charge you a diagnostic fee upfront. This fee is for determining what the problem is and can run between $75 and $150. The cost is often waived if you allow the shop’s technicians to make the repairs for you.

Often, you must decide whether it is worth repairing your TV because in many situations, the cost of repairs is higher than the price of a new TV. For example, when screens are cracked or damaged, the cost of replacing a panel is usually much higher than simply buying a new TV.

Consumer Reports recommends replacing electronics whenever the cost of repairs equals or exceeds half the cost of a new purchase. It is also recommended that you replace your television if the new version is less than $200, or if your screen is smaller than 32”. For example, it costs around $150 for a new motherboard in an LG Model 24LF452B 24” TV, which takes around one hour to repair. As a result, you would pay between $190 and $210 to repair your old set, while it is possible to purchase a new one for less.

If you invested a lot of money in your television, the costs of repairing an inverter or getting new backlights may be far cheaper than replacing it. This is why it is often best to ask a professional to diagnose the problem and give you a quote for the repair work. Then, you can compare the price of repairs against the cost of a new TV and decide what makes sense. If your TV breaks down repeatedly, you have multiple repair bills over the course of a year. It might be time for a new television even if a single repair does not seem too expensive.

To minimize repairs and help your TV stay in working order for as long as possible, take care of it as well as you can. Here are some useful TV maintenance tips:Do not leave the TV on if you are not actually watching it. They can run for tens of thousands of hours, but there is no need to waste those hours. So, avoid leaving it on in the background, and make sure to turn it off when you leave the room.

Try not to leave your TV on for too long at a time. Like other appliances, televisions can start to get very hot the longer they are left on. They need to be turned off now and then to get a chance to cool down and rest before being switched back on.

Keep your TV clean. Over time, dust, pet hair, and bits of dirt can build up on the screen and get inside the television via vents and ports. This dust accumulation can affect a TV’s operation and make it more likely to break down.

Consider using a surge protector to keep your TV and associated devices and appliances safe. This can be especially important in areas that experience a lot of storms or frequent power cuts because sudden cuts and surges easily damage your TV’s components.

When positioning your television, leave space around it to provide airflow. This helps prevent the TV from overheating and cools it down more quickly when you turn it off.

Additional Considerations and CostsDIY. In some cases, television repair can be performed as a DIY project. There are numerous how-to videos available that are easy to watch and understand. Parts for most sets are also available online. However, if you are not comfortable with the process, always call a technician rather than attempting the repair yourself.

DIY issues. While DIY repair is often possible, it is not frequently recommended. There is some risk of electrocution, and you might also damage the TV even more by improperly installing a t-con board or ribbon connectors. If you are in doubt, it is best to leave this job to a professional.

Obvious solutions. Before seeking repairs, first look for the obvious. If your set will not power on, it could be a problem with your outlet and not your TV. Try plugging your television into a different outlet to see if that resolves the problem. If that does not fix it, ensure you have not tripped a breaker, and check that the power cord is fully seated.

Remote control. A set that powers on and off at random is sometimes caused by issues with the remote. Try removing and replacing the batteries or using a different remote if possible.

Warranty. When purchasing a new television, buying an extended warranty can spare you the unwanted expense of repair bills in some cases. An extended warranty is largely based on the price of your television. Expect to spend between 10 and 20 percent of your set’s cost on an extended warranty to help cover damage. Ordinary warranties only cover manufacturer’s defects and, therefore, cannot be used to pay for damage due to neglect or accidents.

Warranty repairs. When having warranty repairs made, drop the set off at a local shop whenever possible or have them come to you. If you need to ship the television off, get a tracking number so that you can locate your set if it gets lost.

Scams. Television repair scams are quite common. Before hiring someone to fix your set, find out what experience and training that person has. Check references and online reviews as well.

In-shop repairs. In-shop TV repair services may involve a pick-up and delivery charge if you do not take it in yourself. While some may do this for free, others charge between $40 and $75 to pick-up and deliver the TV back to you. Additionally, customers that live in rural areas may have to ship the television. If you do this, make sure you obtain a tracking number and proof of delivery. The repair service will contact you with the list of recommended repairs and the cost and request a debit or credit card to pay for the repairs before completing them.

Television repair costs vary widely, but the average consumer pays between $100 and $300. Prices depend on the make, model, and size of your set, as well as the availability of parts. It is generally more expensive to repair an older model than it would be to replace it. New televisions are becoming more affordable every year, but the price of parts remains steady or even increases as older parts become rarer.Can a flat-screen TV be fixed?

Yes, flat-screen TVs can frequently be fixed, including issues with the screen, sound, lighting, cables, and interior components. However, there are some situations where flat-screen TVs cannot be fixed, such as when the screen is severely cracked.How do you fix a broken TV screen?

Not all TV screens can be fixed or replaced. Certain types have components behind the screen that can be damaged by its removal. However, if you choose to proceed, remove all external cables, unplug your set, and lay it face down on a flat, soft surface. Remove any screws holding the frame in place and then gently remove the frame and set it aside. Put your new screen in place and reconnect the internal cables in the same manner you disconnected them. It is usually best to get a professional to handle TV repairs, and the cost of replacement screens is often very high. So, it may be more cost-effective to get a new TV.How many years will a flat-screen TV last?

This depends on the make and model of your TV and your viewing habits. Many modern TVs last 60,000 viewing hours or more, equating to 30+ years for a typical person. However, its lifespan can be reduced if it is not properly maintained and cared for.Does turning the TV off shorten its life?

No, turning a TV off will not usually shorten its life in any way. It is actually recommended to turn TVs off when you are not using them, allowing them to cool down and extend their lifespan.Is it okay to leave a TV on all night?

This is not recommended. If you leave a TV on for too long, it may overheat, which could damage interior components like the motherboard. It may also do damage to the screen and risk ‘burning’ an image into the display, as well as damaging the backlights.Do Smart TVs use more electricity?

Generally, no. Most modern Smart TVs are designed to be as energy-efficient as possible, with some models even using less energy than conventional TVs. It all depends on the TV make and model.

I"ve been looking around for some solutions for this simple decoration and I"ve found quite a few ones, some weird, some even with JS to calculate the height of the font and bla,bla,bla, then I"ve read the one on this post and read a comment from thirtydot speaking about fieldset and legend and I thought that was it.

I"m overriding those 2 elements styles, I guess you could copy the W3C standards for them and include it on your .middle-line-text class (or whatever you want to call it) but this is what I did:

background: transparent; /** It"s cool because you don"t need to fill your bg-color as you would need to in some of the other examples that you can find (: */

Following Bekerov Artur"s idea which is a nice option too, I"ve changed the .png base64 image to create the stroke with an .SVG so you can render in any resolution and also change the colour of the element without any other software involved :)

background-image: url("data:image/svg+xml;utf8,");

Screen burn-in, image burn-in, or ghost image, is a permanent discoloration of areas on an electronic display such as a cathode ray tube (CRT) in an old computer monitor or television set. It is caused by cumulative non-uniform use of the screen.

One way to combat screen burn-in was the use of screensavers, which would move an image around to ensure that no one area of the screen remained illuminated for too long.

With phosphor-based electronic displays (for example CRT-type computer monitors, oscilloscope screens or plasma displays), non-uniform use of specific areas, such as prolonged display of non-moving images (text or graphics), repetitive contents in gaming graphics, or certain broadcasts with tickers and flags, can create a permanent ghost-like image of these objects or otherwise degrade image quality. This is because the phosphor compounds which emit light to produce images lose their luminance with use. This wear results in uneven light output over time, and in severe cases can create a ghost image of previous content. Even if ghost images are not recognizable, the effects of screen burn are an immediate and continual degradation of image quality.

The length of time required for noticeable screen burn to develop varies due to many factors, ranging from the quality of the phosphors employed, to the degree of non-uniformity of sub-pixel use. It can take as little as a few weeks for noticeable ghosting to set in, especially if the screen displays a certain image (example: a menu bar at the top or bottom of the screen) constantly and displays it continually over time. In the rare case when horizontal or vertical deflection circuits fail, all output energy is concentrated to a vertical or horizontal line on the display which causes almost instant screen burn.

Screen burn on an amber CRT computer monitor. Note that there are two separate burned-in images: one of a spreadsheet program, and another of an ASCII-art welcome screen.

Phosphor burn-in is particularly prevalent with monochromatic CRT screens, such as the amber or green monochrome monitors common on older computer systems and dumb terminal stations. This is partly because those screens displayed mostly non-moving images, and at one intensity: fully on. Yellow screens are more susceptible than either green or white screens because the yellow phosphor is less efficient and thus requires a higher beam current. Color screens, by contrast, use three separate phosphors (red, green, and blue), mixed in varying intensities to achieve specific colors, and in typical usage patterns such as "traditional" TV viewing (non-gaming, non-converged TV usage, non-Internet browsing, broadcasts without tickers or flags, no prolonged or permanent letterboxing) are used for operations where colors and on-screen object placement approach uniformity.

Modern CRT displays are less susceptible than older CRTs prior to the 1960s because they have a layer of aluminum behind the phosphor which offers some protection. The aluminum layer was provided to reflect more light from the phosphor towards the viewer. As a bonus, the aluminum layer also prevented ion burn of the phosphor and the ion trap, common to older monochrome televisions, was no longer required.

A nearly two-year-old LCD television showing extreme burn-in of CNN"s circa 2008 digital on-screen graphic; this television is in a McDonald"s restaurant where CNN is permanently turned on and displayed throughout the business day.

In the case of LCDs, the physics of burn-in are different than plasma and OLED, which develop burn-in from luminance degradation of the light-emitting pixels. For LCDs, burn-in develops in some cases because pixels permanently lose their ability to return to their relaxed state after a continued static use profile. In most typical usage profiles, this image persistence in LCD is only transient.

Both plasma-type and LCD-type displays exhibit a similar phenomenon called transient image persistence, which is similar to screen burn but is not permanent. In the case of plasma-type displays, transient image persistence is caused by charge build-up in the pixel cells (not cumulative luminance degradation as with burn-in), which can be seen sometimes when a bright image that was set against a dark background is replaced by a dark background only; this image retention is usually released once a typical-brightness image is displayed and does not inhibit the display"s typical viewing image quality.

Screensavers derive their name from their original purpose, which was an active method of attempting to stave off screen burn. By ensuring that no pixel or group of pixels was left displaying a static image for extended periods of time, phosphor luminosity was preserved. Modern screensavers can turn off the screen when not in use.

In many cases, the use of a screensaver is impractical. Most plasma-type display manufacturers include methods for reducing the rate of burn-in by moving the image slightly,Android Wear watches with OLED displays can request that Android Wear enable "burn protection techniques" that periodically shift the contents of the screen by a few pixels.

Other examples: Apple"s iPhone X and Samsung"s Galaxy series both mitigate or delay the onset of burn-in by shifting the pixels every minute or so for the battery, Wi-Fi, location, and service bars. Also, parallax scrolling may be enabled for the home screen to give icons a 3D-like effect, a setting Apple refers to as "perspective zoom". AG Neovo patented Anti-burn-in technology is also using pixel shifting to activate the pixels to move by the designed time interval to prevent burn in effect on LCD monitors.

Google requests that when these techniques are enabled, watch face developers do not use large blocks of pixels so that different pixels are burned in with each shift, reducing the overall wear of the pixels.

Some screensavers move around, such as those on DVD players or those on some television sets that move around paused video after a long period of inactivity.

Depending on the type of screen, it is sometimes possible to remedy screen burn-in through the use of remedial software and remedial devices. In the case of OLED screens on Android phones, burn-in reduction apps can display an inverted image of the navigation and status bars (which are constantly displayed and therefore the most likely elements to be burned in) to burn in opposite pattern, resulting in a screen whose sub-pixels have more even luminosity and therefore less visible burn-in artifacts.

The most prevalent burn-in image on early televisions was said to be that of the RCA Indian-head test pattern, which would often follow the formal television station sign-off. This was due to the viewer leaving the television set on at the end of the day, which was not recommended by the television manufacturers.

But you shouldn’t do this because the horizontal rule appears as is only presentationally, not semantically. Instead, you should draw a line with a div or span as the case may be.