1602a lcd display pricelist

16x2 Character LCD - Black on Green is a 16 characters wide, 2 rows character LCD module. It utilizes industry-standard controller, works in 4/8-bit parallel interface. Display area is LED back-lit in yellow color.

This alphanumerics display can be easily interfaced with any host controller such as 8051 derivatives, PIC Series, AVR, ARM series of controllers or using development boards such as Arduino or Raspberry Pi. It fits in quite well for any electronic device design.

This GREEN COLOR 1602 CHARACTER LCD DISPLAY 16X2 LCD DISPLAY is 16 characters wide,2 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with yellow green color included can be dimmed easily with a resistor or PWM,stn-lcd positive,dark blue text on the yellow green color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set.Optional 3.3v or 5v power supply and optional pin header connection.

Across Arduino projects, you need a display unit to reflect the output visually. It is perfect to integrate a display that can demonstrate your results in an LCD format. In case your project requires only a little-sized unit, the LCD 1602 LCD Display is likely to be a perfect choice for your Arduino or other projects. It brings simpler solutions that are too, at competitive prices. Users can mount 16 x 2 White on RGB LCD (Liquid Crystal Display) into your innovative projects.

Further, the display under question is a panel that can hold 16 characters divided into two lines with a blue color background. Ultimately, it delivers a crystal-clear presentation with high contrast in the white-color text format. The unit further justices the superiority in many ways. It is quite brilliant when it comes to integrating with Arduino projects. Users will have no hassle to interface the unit with Arduino and other microcontrollers.

On the display presentation, the unit will show the values either in the simple text format or numerical values. The sensor reads the data and conveys it to readers through the LCD display in numerical or text shapes. For instance,it can show the temperature, pressure as well as the number of cycles performed by Arduino.

If you"re looking forward to making your Arduino projects display status messages/readings, implementing the LCD1602 LCD Display is a great thought. In fact, it is the best and common way to embrace your Arduino projects with interface prospects.

Since the LCD 1602 Display presents text/characters only, therefore it is named as character LCD. It integrates an LED backlight that can show 32 ASCII characters in two rows (16 characters on each row).

E (Enable): Simply, this pin is used to enable the display. It processes the incoming data after you set the pin on HIGH. However, it doesn’t consider the data from R/W, RS, and other pins.