st7789 tft display module in stock

This is a low-cost but powerful TFT display that makes your project look awesome! The display has 240 x 240 pixels resolution, and its size is only 1.3inch. This allows you to display a high-quality picture, to make your project really cool.

The module interface is SPI, to make the display small the CS pin is not breakout, but you can still drive it without connecting a CS pin, here is a library working library for this particular display, to make it working properly, you also need to install Adafruit’s GFX library.

This is a 280 X 280 pixels TFT display module, with a 1.69inch display size making it a great fit for small size projects like wearable IoT or any other portable devices. The display’s driver IC is ST7789, which you can find many libraries to quickly start with.

Operates at 3.3V, so if using with a 5V MCU, include logic level shifters on the data lines to prevent damage.  The module don"t have a 3.3V regulator so you must power with 3.3V.

This is a write only device and doesn"t need the SPI MISO line hooked up.  The  module also doesn"t bring the CS pin out to the interface which helps to lower the pin count.  Unfortunately, it can"t be used with other SPI devices on the same bus simultaneously.

Breadboard friendly with a 7-pin header on the back. It can be inserted into a breadboard or a 7-pin female connector to mount the display.  PCB mounted display which helps provide support. Don"t press on the glass portion of the display when inserting into a breadboard. Use the pin headers.