white spot on lcd screen fix for sale

A high-quality picture of digital television depends on the correct setup of the equipment, a good receiver, and the correct operation of the monitor. Over time, even the quality models of Sony, Samsung, LG equipment, white spots may appear on the TV screen. To eliminate them, you need to find out the cause of the breakdown, decide if you can fix the TV by yourself or if you should refer the equipment to professionals.

So What Are White Spots on TV?LCD TV Screens are comprised with thousands of tiny pixels, and they cycle through 3 basic colors; blue, red, and green and they create an image. The problem arises when a pixel gets stuck in the “on” position, and it appears as a white dot. Hot pixels come with defined edges and they are either square or straight lines.

White spots (or dots) on the TV screen are the result of a damaged processor and the overheating process during warm summer temperatures.Another reason that can be the cause of white spots on the TV screens is spikes or surges as electricity supplies can vary throughout the year.On top of every LED of your TV, there sits the reflector. These white dots on your TV screen are the results of a fallen reflector. The number of dots has corresponded to the number of fallen reflectors.

To eliminate the problem of white spots on your screen, you just need to carry out simple manipulations at home. Keep in mind that only professionals can fix more complicated failures. Regardless of the place where the repair can be, the reasons for white spots include:

Kinescopebreakdown of the frame scan; malfunction of the TV picture tubeElimination of malfunctions in the service. A failed picture tube cannot be repaired. In rare cases, it can be replaced.

In most cases, the self-repair attempts can lead to the need to buy a new TV. Repair of equipment by professionals will cost 1.5-3 times cheaperthan the new TV.

If light spots appear on the LCD TV screen, you will need a clean soft cloth and remote control to remove them. The second thing to do is adjust the TV settings. This can be done by adjusting the backlight and screen brightness:

Important! In the process of changing the brightness level, the intensity of the white spots should change. If they remain unchanged, the settings are not the cause of the defect.

If wiping the screen, checking that the brightness and contrast settings are correct, and loosening the screws did not get rid of the white spots on the LCD TV screen, you can replace the matrix. It is better to contact specialists for this, but if you have experience with television equipment, you can carry out repairs on your own.

Important! It is best to carry out repairs with soft cotton gloves. You need to disconnect the cables carefully and smoothly. If you damage them during the repair process, you will have to replace them or buy a new plasma, LCD TV.

If your TV is under warranty and white spots appear during this period, take it to a service center. Masters will diagnose, exclude, or confirm the presence of a factory defect. The TV will be repaired for free or with a big discount.

Black spotsand most of the streaks are removed in other ways. The general repair option is possible only in case of system failureswhen a reboot of the equipment or restoration of factory settings is required.

White spots are something that can appear on any TV whether it is new or used. What you need to know is that you need to react in a timely manner and know how to deal with them. In this article, we have described the detailed procedure, and guided you through the entire process. If you have a warranty, use it. I hope you have understood the cause of white spots and that you will solve it with the help of this article.

If you find yourself in a situation where you notice white spots or dots on your TV, don’t worry. This problem is known to occur on most LCD TVs and it is really simple to solve. White spots (dots) that you notice are the light from the LED backlight inside your TV.

Due to frequent use or poor quality, some parts inside the TV can move from their spot and cause white spots or dots to project onto the screen. In this article, we’ll explain why this problem occurs and how to solve it. So, let’s start.

So What Causes White Spots or Dots on TV Screen?White spots or dots on LCD TV are a result of a fallen reflector (lens) inside the LCD TV panel. These reflectors are placed in front of the LED backlight and are used to spread the LED light on the screen. Usually, they fall off due to the poor quality or the heat that is created inside the TV.

When you open the TV you will find a bunch of LED lights that are covered with plastic reflectors or lenses. These lenses are mostly glued in front of LEDbacklights, and as the TV overheats with use, they start to fall off from their spot and create white spots or dots on your TV screen.

There is also a similar problem with LCD TVs, and that is the creation of dark (black) spots on TV. If you are interested to learn What Causes Dark (Black) Spots on TV Screen, read the following article.

As we said above, these white spots or dots that appear on LCD TVs are most often the cause due to overheating problems and the poor built-in quality.Anyone who has paid attention knows that older TVs are practically not affected by this image error.

This problem is mainly found in televisions with LED backlighting, more precisely, the so-called side-LED backlighting. A light-conducting plastic plate is located behind the panel.

LED Reflectors: Each LCD TV comes with a reflector (lens) that helps to facilitate and spread the LED light on the screen. Sometimes, these reflectors get to loosen up and they fall off from their spot. When that happens, you will notice the white bright spot on your TV screen. In most cases, you will have several white spots (dots) on your screen, not just one.

Whether or not you have previous experience in repairing TVs or gadgets, if you follow the instructions below, I believe you will be able to fix your TV and get rid of the white spots on your TV screen. You will need to disassemble your LCD TV and return the fallen reflectors to their original place with the help of glue. What you will need is the following:

If you get stuck on some step in the process above, watch this great video where everything is explained in detail and shows the whole process of how to fix this problem with white spots or dots on your LCD TV.

If you already have an LCD TV or have decided to buy one, the testing process is identical. I always do a test before I decide to buy a new LCD TV. Even new models can have problems with white spots or dots. During transport or by the poor installation quality, round reflectors can fall out of place and cause white spots. So, to test a TV before buying and see whether the image defect is present you can do a simple test.

There are different TV models (types) where this problem with white spots or dots can occur. On some TV models, the problem that causes white spots may be different, so it is necessary to know how to proceed.

Also, keep in mind that if you encounter a more complex problem, leave it to the professionals. In the table below, you can see how to fix the problem with white spots or dots for different TV types:

TV typeMain Cause of White Spots or DotsFix Problem of White DotsLCD / LED TVFallen reflectors (lenses) inside TV; impact or pressure on the screen surfacePlacing the reflector (lenses) on the right spot by using super glue.

White spots (dots) on the TV screen are a very common problem on LCD TVs. Almost all LCD TVs work by using a small chip that is made up of millions of tiny mirrors. Each mirror is like a dot or pixel on that screen.

When the reflector or lens is moved from the spot, it causes these white dots to appear on the screen. But in some cases, there might be more damage on your TV screen than just a moved reflector or a dead pixel and it can cost you more than a new matrix.

Therefore, it is recommended to contact the TV specialist if you notice that the problem is not only with the moved reflectors but in something more. Keep in mind that if your TV is under warranty, it is recommended to contact a service center, and let them handle this problem. They have more experience with these kinds of problems and they will fix your TV for free.

The problem of white spots or dots is not something new, and it can appear on almost any LCD or LED TV whether it is completely new or used. We have already mentioned in this article that this problem can be solved very easily and you do not have to be afraid.

You can disassemble the TV and see if the reflective lenses have fallen out of place and use super glue to put them back on. If you think you can’t solve this problem on your own, contact a TV service technician and let him do the job. I hope that we helped you at least a little and that you will be able to solve the problem with white dots.

Thanks guys! I just replaced the leds for my tcl 55 inch tv and after bout a week I started seeing the bulbs on the left side of the screen. Since the tv was an awesome find and the bulbs were like 30 bucks on eBay I’m fighting the inevitable being going back in and fixing that plastic deflector post. The screen is extremely fragile so if u don’t wanna pay 14 bucks at Home Depot for them window suction cups that were well worth the money For loners like myself lol, make sure u get another person to help u with the screen panel once it’s been dislodged . Especially if it’s a big honker. Nothing more scary than popping it out by urself and get stuck in a very bad situation as in u can almost hear the crackin of the screen Or knowing that I’d u take one more step this here screen will crack .

so disappointing with Samsung and my 65 inch TV. Only 5 years old and I have white spots on my screen. After doing some research I find it is because some of the filter lens have come un glued causing the LED light to shine through. This is clearly due to poor workmanship. I called Samsung and they tell me sorry you are out of the warranty period. Would you like to buy a new Samsung TV, we got some great deals for loyal customers. First why would I buy a new Samsung TV when you do not make a quality product. Second the price quoted was the same as at Best Buy. So no big savings. I have a Sharp TV that is 15 years old with a perfect picture. I wanted a smart TV and thought I purchased a quality TV but now I know I did not! Make it right Samsung send me a new TV that works. Richard Basila.

While modern TVs continue to bring more entertainment edge into our living rooms, they can never really come without issues. One common issue affecting LCD/LED TV owners is clouding. This problem is more apparent in Televisions with fluorescent backlighting and can affect even the top-rated TVs on the market.

TV display settings can amplify and reveal screen clouding. However, you can make a few simple adjustments to fix the issue, improving your TV screen quality.

Clouding occurs when there is a lighting leak to the visible portions of the screen, leading to uneven blacks. This phenomenon appears in some areas of the screen where they seem greyer than black in darkly lit scenes, along with variable brightness in regular pictures.

Clouding is the uneven backlighting typically caused when lighting bleeds into the visible part of the TV screen. This will give the display screen an appearance as if there is a white shadow or clouding during dark scenes. Fortunately, this is a common effect with new TVs and in most cases gradually decreases with usage. Additionally, if the backlight of your tv is giving you issues, you can check out this article on how to fix the backlight on TV.

Your TV display settings can amplify and reveal screen clouding. However, you can make a few simple adjustments to fix the issue, improving your TV screen quality.Reducing the TV backlight level

Before making these adjustments, ensure that any smart sensor or “iris” features on your TV are turned off. These features are designed to adjust the TV screen brightness automatically depending on how much light is in the room. When these features are activated, they affect the TV user’s ability to reduce the clouding effect adequately. The problem may also be compounded when you use these energy-saving tips for televisions, which may affect the display.

Sometimes the TV screen is clouded by dust and debris, and when turned on, it could have a cloudy appearance. Use a soft clean, microfiber cloth. Take note of the TV screen texture and look for foreign spots caused by debris or dirt on the exterior.

If you notice a dark area on the screen that is similar to a clouding effect, adjusting your TV display setting is the best resolution. After making the adjustments, test your LED TV to ensure the changes have worked. If you are having black spots on your Tv then you should not worry much, simply try the black spot on the tv screen repair and everything should be alright.

Sometimes when clouding occurs on your TV, it could be a sign of screen damage. This can be caused by a drop impact or cracks on the LED display. If this is the case, your TV will require an LED screen repair or replacement service by a professional.

Before you send in your LED TV for replacement service, thoroughly inspect the unit for signs of physical damage. If adjusting the settings doesn’t make any changes, contact your manufacturer for a way forward.

Also, find out the status of the warranty and pursue the warranty repair service by the manufacturer. Most modern TVs come with a warranty option you can use.

Alternatively, if you need to purchase a new one, there are many options to choose from no matter what you looking for like these top-rated Toshiba TVs. If your TV was old and wasn’t 4k, getting a new 4k TV will show you how much image quality has improved over the years. If you aren’t sure about the resolution of your old TV you can learn how to check it by reading our article on how to know if your tv is 4k. Additionally, if you like watching movies, you will want to check out the best sounding TVs if you are looking for a new one.

Clouding is the uneven backlighting typically caused when lighting bleeds into the visible part of the TV screen. This will give the display screen an appearance as if there is a white shadow or clouding during dark scenes.

Clouding appears in some areas of the screen where they seem greyer than black in darkly lit scenes, along with variable brightness in regular pictures.

Your TV display settings can amplify and reveal screen clouding. However, you can make a few simple adjustments to fix the issue, improving your TV screen quality by; reducing the TV backlight level, changing the power saving setting, and turning on the light sensor.

Sometimes when clouding occurs on your TV, it could be a sign of screen damage. This can be caused by a drop impact or cracks on the LED display. If this is the case, your TV will require an LED screen repair or replacement service by a professional.

STAT:It is estimated that 65% of Americans still pay for Cable TV. However, based on surveys, these subscribers have been reduced by 28% between 2013 and 2023 (source)

Once you have found the correct part number, see HP Consumer Notebook PCs - Ordering HP certified replacement parts. Use the instructions in this document to order a replacement part.

HP recommends that you only order parts from an authorized HP repair parts dealer. Parts ordered from third-party companies might not perform as expected and might cause additional

Local TV repair outfit, sort of affiliated with Best Buy, said that we are lucky it is only a tiny white dot. Most have a complete piece of junk after similar or worse damage.

I was told that the only fix is replacement of the glass panel. This is $900 plus service and labor. Not really worth it even though I paid a very good price initially. This technician of some measure of experience has, "tried everything", to repair glass panels.

This is my point about a learning experience regarding big screen LED screen technologies. Seems to me there would be enough cases of junked units and wasted investment to start class action lawsuits vs. manufacturers.

I can live with the dot as it doesn"t bother the image on sports...you don"t notice it at all... Movies and dark images are another thing...and i"m a movie buff so part of my T.V. experience is affected.

Knowing how to fix dead pixels is a good skill to know. If you’ve noticed unusual spots on your display, you might be dealing with stuck or dead pixels. Fortunately, these pixels are usually harmless and can be detected using special pixel tests.

Dead and stuck pixels can appear on LCD screens of all kinds. This includes monitors, phones, and camera displays. It’s easier to spot them on larger displays, though.

If you’re using a camera, carefully look at your LCD display as you take photos. Are there any spots that stay in the same place no matter how much you move your camera? Those spots are dead or stuck pixels.

There’s a distinct difference between stuck and dead pixels. If you’re completely sure that the pixels on your screen aren’t dust, you need to identify them.

Stuck pixels are usually red, green, blue, or yellow. Dead pixels are black. No matter how much your screen changes, those pixels will remain fixed in one spot and won’t change their color.

Keep in mind that stuck pixels can also be black or very dark in color. You might accidentally mistake them for dead pixels. To make sure that they’re not dead, you need to use a dead pixel test. More on this later.

Stuck pixels are much easier to remove than dead pixels. If you’re sure that there’s a dead pixel on your screen, you’ll probably have to hire a specialist or replace your display.

Here are a few simple websites that let you check for dead pixels using solid colors. They basically do the same thing, but one of them might be more compatible with your device/browser than the other.

You need to be in full-screen mode. Make sure you wipe your screen beforehand so that you don’t accidentally mistake a speck of dust for a dead pixel!

Click on each color. If you don’t notice any unusual spots (black or any other color) on your screen, it’s likely that you don’t have an issue with dead or stuck pixels.

Some users recommend rubbing a dead pixel using a cloth to get rid of it. This might work temporarily, but it will damage your display in the long run.

Too much rubbing can damage even more pixels on your screen and lead to serious problems. If none of the solutions work, the best way out is to contact a specialist.

As mentioned previously, dead pixels are usually impossible to remove without professional help. However, you need to make sure that those dead pixels aren’t secretly stuck pixels or simply dust particles.

This is a very simple and seemingly straightforward method. But it might be the best solution to your problem. If your screen appears glitchy, it might simply need to be refreshed.

Use a screen-cleaning spray and a cloth to wipe your display. Make sure you don’t apply too much pressure or else you might damage your screen. A few gentle swipes might get rid of the problem.

If the options above don’t work, JScreenFix might be your best solution. This is a website that anyone can use for free. You don’t need to download any programs or extensions to use it. Best of all, it promises to remove stuck pixels in less than 10 minutes.

What JScreenFix does is fix stuck pixels. If you think you have a dead pixel, you can try this method as well. For this to work effectively, you need to know where exactly your stuck pixels are located.

Your job is to find the stuck pixel and drag the box to it. Leave it there for a few minutes. This should get rid of any unusual pixels on your display.

If you’re sure that the pixel is dead (and not stuck), then you’ll need to see a specialist. There are a few methods for fixing dead pixels, but most of them don’t seem to work effectively.

Dead pixels usually don’t spread. They’re usually a small fault in a display. If they do spread, you might need to hire a specialist or replace your screen.

Make sure you clean your display, take a dead pixel test, and use JScreenFix to get rid of the pixels. It’s likely that this will fix the problem and prevent you from consulting a specialist.

If you have a cracked screen on a Samsung cellphone, you may wonder if it"s possible to restore your phone to its original condition. There"s no need to worry because are many options available to fix your screen. With a few tools and an LCD replacement, you can install a new screen.

If the screen is cracked and nonfunctional, you need a replacement. If you notice that the screen is not responding or the resolution is fading, it may be time for a new replacement display as well. Even issues with the touch sensors may mean that it"s time for an upgrade. Touch screens are controlled by a digitizer. A device that is not responding might need replacements for both the LCD screen and the digitizer.

As long as you have verified the model number of your Samsung, you can find a screen that works with your device. It is important to find the right part for your model. If you don"t check the compatibility of the replacement part, you could end up with one that keeps your Samsung phone from functioning properly.

There are many versions of the Samsung Galaxy on the market. You can find replacement parts for most of these models. Another option for many people is to buy parts that have come from another device. Since some phones have been replaced in this series, the parts are becoming more readily available on the aftermarket.

You need a screen replacement that is compatible with your Samsung device. You may also need a digitizer if the touch screen is not doing its job. Special screwdrivers and a pry tool will help you with the repair. You might also need a little time and patience. Try not to rush through the replacement process. The display parts are very intricate and need to be handled with care. You should take your time when removing and reinstalling them.

Once you have replaced your screen, keep it in good condition by installing a screen protector. This is usually a plastic or vinyl piece that goes over the display portion of the device. It can shield the screen from scratches. You may also want to get a case for the phone. It may not specifically protect the display, but it will protect the entire phone from bumps and drops.

This article was co-authored by Luigi Oppido and by wikiHow staff writer, Jack Lloyd. Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.

Are you looking for how to get rid of those irritating spots on your phone screen? This article shows you everything you need to know on how to fix pressure spots on LCD screens and how to prevent them in the future.

One of the deadliest and most frustrating issues you could have with your mobile phone is screen damages. And for pressure spots on LCD screens, it"s somewhat annoying than breaking the whole screen itself, as it requires going for replacement in most cases.

As its name implies, pressure spots on phone screens can render the display useless (or irritating, based on how you see it) by creating spots of different shapes and styles on the screen. These spots show continually, and most times, permanently on the display and can obstruct your viewing or cause other problems such as dead pixels, flickering, or blurriness.

When you apply too much pressure on your phone’s display – whether accidentally, intentionally, or carelessly, it damaged the LCD components, hence creating different spots on the display.

Pressure spots on LCD screens can come in different forms and shapes depending on the density of pressure applied. Sometimes, the spots can be whitish, deep black, or come in various colors depending on what’s currently showing on the screen.

Unfortunately, learning how to fix pressure spots on LCD screens isn"t the same as learning how to fix simple hardware and software issues. Simply put, there is no way to repair a phone screen that was damaged by pressure.

Attempting to get rid of pressure spots on LCD screens can cause more harm than good. Hence, you had better find a professional phone repairer to help you with screen replacement.

Meanwhile, some users reported that the pressure spots on their phone screen got healed after a few years. But do you want to keep seeing the same issue on your screen for years? So, a screen replacement is the only way out.

Fortunately, if you use a TECNO, Infinix, or itel smartphone, Carlcare Service is the best bet for you when it comes to replacing your damaged screen and fixing other issues on the device. We"re the official after-sales service provider to render professional repair and customer services for these brands.

And if you’ve bought our extra Screen Protection Plan for your TECNO, Infinix, or itel device earlier, you might be able to replace your screen for free, or better still, get huge discounts on-screen replacement at Carlcare.

Also, if you notice pressure spots on your Syinix TV, the best thing to do is bring it down to our service centre for proper screen replacement with genuine stock parts.

Paying for screen replacement from your own pocket (especially when you don’t have any form of screen insurance or protection plan), can be a pain in the ass. However, there’s probably nothing you could have done better than learning how to protect your phone screen from pressure spots in the future.

Pressure spots on LCD screens (or any screen in general) occur accidentally or carelessly. The only way to avoid such damage in the future is to handle your phone carefully. Try as much to shun applying much pressure on the screen while playing games and performing other tasks.

When inserting your phone into your pocket, purse or bag, ensure there"s enough space to accommodate it. Also, ensure there are no other objects inside the pocket, purse, or bag.

Equally important, if you"re wearing a dress with tight pockets, we recommend you keep your phone somewhere else rather than forcing it inside the pocket, as it may be pressurized when you move your body.

Overall, the only way to prevent your phone screen from getting pressure spots in the feature is to handle it carefully whenever and wherever possible. If you ever come across the need to drop your phone somewhere, ensure you don’t place anything on it.

Taking these few things into consideration would help you protect your phone screen from pressure spots in the future, rather than looking for how to fix pressure spots on LCD screen when it happens.

Now, if you’ve accidentally applied much pressure on your phone’s screen and some spots are showing on it when you turn it on, the best thing you can do is to visit the official service provider for your device for a screen replacement. Trying to shift the spots away or performing some DIY tricks may cause more harm than good.

I have an Inspiron 710m and have a bright white spot on the bottom 1/4 of the screen. It started about the size of a 50 cent piece and is not covering about the bottom 1/4 of the screen. It is bright enough that when watching a movie, at times you cannot make out the portion of the picture in that segment of the screen.

Does anyone know what this is and how can I fix it? I live in a fairly rural area, so there are not a lot of options for taking it out for repair. There is a Best Buy. I am fairly handy so I am willing to attempt repairs myself if not too complicated.