mcwill lcd screen in stock

It’s my personal opinion that the Game Gear’s screen has not aged well. Unlike the Game Boy systems, there was only one revision of the Game Gear made by Majesco, which didn’t offer much improvement. Some people have modded the GG’s backlight with a newer one which saved battery life, but it didn’t improve the overall picture enough to make a drastic difference. Other people had even installed newer LCD screens into their Game Gear’s, but you’d either be forced to play them in half-screen, or stretched. Luckily, McWill, creator of the excellent Atari Lynx mods has also created a kit for the Game Gear, marking the first time someone’s truly been able to improve the Game Gear’s portable experience.  His LCD kit offers scaling effects and scanlines without creating any lag, all while having the pixels stay in their right positions. This is because the pixels are captured digitally into ram, instead of being an analog conversion.

Let’s first take a look at how McWill’s screen compares to the original and Majesco Game Gear screens. Keep in mind that while people claim the Majesco screen’s are generally slightly better quality, the condition of the Game Gear makes the biggest difference. While my Majesco GG is in excellent condition, it’s unmodified and my original Game Gear has had a full capacitor replacement. I can still see slightly more detail in the Majesco screen, however if both had brand new capacitors, it would be a bit more noticeable. More importantly though, even a perfect condition Majesco screen pales in comparison to the replacement LCD (click for full-sized):

The LCD screen mod has seven different modes that can be scrolled through by holding buttons 1, 2 and Start at the same time.  Here’s a description of each:

2 – Scaled Resolution with Scanlines:  This mode ads vertical scanlines, emulating the look of the original screen.  It’s very hard to capture in pictures, but in person I really enjoyed the effect it created.

3 – Doubled Horizontal Resolution, Scaled Vertical resolution:  This mode doubles the GG’s 160 horizontal pixels to 320, so when stretched to the 320 pixels of the LCD screen, the horizontal resolution eds up scaled perfectly, while the vertical resolution is stretched.

Here are screenshots of each mode, listed in the order described above.  It’s very hard taking pictures of LCD screens, but I did my best.  Keep in mind that it actually looks much better in person:

Master System on Game Gear:Unlike when using the original screen, SMS games on a Game Gear with a screen replacement look great!  Also, McWill added the same scaling options as for Game Gear games:  They can either be played in their original resolution of 256×192 to preserve the aspect ratio, or that resolution can be stretched to 320×192 to fill the screen horizontally.  Both modes also offer vertical scanlines, which I think is a great effect:  It still feels like you’re playing an SMS game on a Game Gear…but you can actually see what’s on the screen!  Click below for a full-sized pic:

In a perfect world, we’d be able to find modern LCD’s that match the exact size, resolution, refresh rate and aspect ratio of the original handhelds. Since that’s impossible to find, McWill has done the next best thing by digitally scaling the original Game Gear video signal onto a newer, high-quality screen. While it doesn’t exactly match the look of the original Game Gear, I find the second mode “Scaled Resolution with Scanlines” to be great for most games.  Some games such as Fantasy Star have weird vertical effects in that mode, so for those games I just switched to doubled mode and it looked fine.

As a kid, I owned a Game Gear and while I really loved it, I was always annoyed and distracted by the terrible look of the screen;  Even back then I felt it took away from the gameplay.  I can honestly say that playing Mega Man on my Game Gear with McWill’s LCD screen absolutely blew me away and it was like experiencing the Game Gear again for the first time.  Unfortunately, the kit is extremely expensive, but truly worth it for any serious Game Gear fan.

McWill’s website is currently being finished, but if you’re interested in this mod, you can reach him on the Atari Age forum, or email him directly:  order-lynx-lcd@online.de

I suggest checking out the Game Gear TV-Out page for details on McWill’s VGA / RGB out mod, otherwise please head back to the main Game Gear page for more information.

This listing is for the Installation Service Plus LCD Hardware for an LCD Screen replacement in an original Game Boy Color System. This includes the shell, buttons, and new glass screen lens.

PLEASE READ: We highly suggest insuring your shipment to us. We are not responsible for any damage until the console is received and inspected. Your console must be in working order when inspected. We only provide the installation of the Game Boy Color LCD Screen. Please Do NOT ship your console to us without purchasing this service first.

This installation service includes the Game Boy Color LCD Screen hardware as well as a new shell and buttons. Your old Hardware will not be saved or returned to you unless you request it.

Breathe new life into your classic Atari Lynx hand held with this cutting edge LCD replacement. Replacing the dated original LCD with this new, vibrant model will make playing Lynx games a lot more fun, thanks to increased brightness, contrast, picture sharpness and improved battery life. Check out the picture below to see the difference the mod makes (click on the picture to see a bigger version).

What’s more, these kits provide a VGA output option, allowing you to play your Lynx games on your monitor or HDTV (VGA input or a suitable adapter, such as an OSSC, is required). Now, when you are home you can enjoy your favourite classic Atari Lynx games on the big screen too!

These replacement LCDs are the best on the market and have been specifically engineered for the Atari Lynx. Both Lynx I and Lynx II are supported. Unlike the Game Gear, the native resolution of the Lynx is a great fit for these new screens and no complex scaling is required. Apart from a tiny change in the pixel aspect ratio, the screens are a perfect replacement. You can even add an authentic scanline overlay by pressing the backlight button on the Lynx II or by turning the backlight thumbwheel on the Lynx I.

Breathe new life into your classic Sega Game Gear hand held with this cutting edge LCD replacement. Replacing the dated original LCD with this new, vibrant model will make playing Game Gear games a lot more fun, thanks to increased brightness, contrast, picture sharpness and improved battery life. Just look at this comparison picture to see the difference.

What’s more, these kits provide a VGA output option, allowing you to play your Game Gear games on your monitor or HDTV (VGA input or a suitable adapter, such as an OSSC, is required). Now, when you are home you can enjoy your favourite classic Game Gear games on the big screen too!

These replacement LCDs are the best on the market and have been specifically engineered for the Game Gear. While not retaining the native resolution of the original Game Gear screen, they offer several versatile scaling modes, these modes can be selected at any time by holding buttons 1, 2 and Start on the Game Gear. The modes are as follows.

3 – Doubled Horizontal, Scaled Vertical Resolution – An alternative scaling mode that doubles the consoles 160 horizontal pixels to 320. When scaled to the 320 pixels of the LCD screen, the horizontal resolution is upscaled perfectly, while the vertical resolution is stretched to fit.

7 – Native Resolution – This mode displays the native 160×144 resolution centred in the 320×240 resolution of the screen with black borders around the edges.

Please make sure your Game Gear is in good working order before installing this mod. If the existing LCD is faint or can only be seen at an angle, you must replace the systems capacitors, otherwise performance from the replacement LCD will not be satisfactory. There are various guides on-line on how to do this or we can perform the repair for you here.

The installation of the Magic Screen requires (in addition to the original screen and its backlight system of course) the removal of only 3 components.

Thus the Magic Screen consumes between 1.6W and 2W depending on the backlight setting chosen and we have chosen to equip the kit with a switch-mode power supply for maximum reliability. We did not want to risk the linear power supply which sometimes causes a short circuit in the kit or in the console.

McWill LCD screen upgrade for the Sega Game Gear handheld system! Play your games with a better display over the original stock one with a huge improvement on the picture! System has been recapped as well to ensure that it works properly!

Replace your aging Atari Lynx screen with the new McWill Atari Lynx screen! This new screen offers a sharp and clear image and consumes less power than the original stock screen. For an additional charge, a VGA port can be installed so that the Lynx video can be output to a modern display.

We"ve designed the V1 GG lcd kit to give the absolute best image quality for the price. We use IPS panels with an amazing viewing angle, deep blacks, rich colors and bright whites. IPS is the technology used in smart phones - vs TFT which was the standard used in the 2000"s. The V1 kit does not provide VGA out.

Note: PCB images are of the prototype, production board will be smaller and attached to the LCD.  Shell modification is required. Soldering is required.

While the Sega Gear is a great portable console, the stock LCD screen is pretty poor with its washed out look and poor refresh rate. We can replace the tired LCD screen with a modern McWill screen in your Sega Game Gear.