3.5 tft lcd shield arduino supplier

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful (18-bit 262,000 different shades)! 320x480 pixels with individual pixel control. As a bonus, this display has a optional resistive touch panel with controller XPT2046 attached by default and a optional capacitive touch panel with controller FT6236 attached by default, so you can detect finger presses anywhere on the screen and doesn"t require pressing down on the screen with a stylus and has nice glossy glass cover.

The pin32 (SDO) of 3.5 display module is also used by touch panel or SD card SPI interface, so we must cut off this pin to avoid conflict with the touch panel or SD card.

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you"ll have it running in under 10 minutes! Works best with any classic Arduino (Due/Mega 2560).

This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!

If you"ve had a lot of Arduino DUEs go through your hands (or if you are just unlucky), chances are you’ve come across at least one that does not start-up properly.The symptom is simple: you power up the Arduino but it doesn’t appear to “boot”. Your code simply doesn"t start running.You might have noticed that resetting the board (by pressing the reset button) causes the board to start-up normally.The fix is simple,here is the solution.

This TFT 3.5 Inch LCD display support 480x320 pixel resolutions. The display uses the ILI9481 graphics controller. The module includes the 5V-3.3V power conversion circuit and no additional level conversion circuitry is required. This Module can be inserted directly into the Arduino Mega2560 Board.

This TFT display is big (3.5" diagonal) bright and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display.

Liquid Crystal Display, which we abbreviated as LCD, came up with the combination of display technology with arduino. Touch LCD Shiled, with its 480x320 resolution and TFT model, is designed to provide ease of use and control to arduino projects, as well as to color it. You can view your photos with the SD slot. Also compatible with boards such as Arduino Uno, Leonardo, Uno Plus, Nucleo, Xnucleo.

The 3.5" TFT LCD Touch Display Shield for Arduino has been fully assembled, tested, and is ready to use. Install the touch display without any wiring or soldering! Simply plug it in and load a library; you"ll be up and running in less than 10 minutes! It works best with any traditional Arduino ATMEGA328 board. So add a beautiful touchscreen display shield with a built-in microSD card connection to your Arduino project. This TFT display is large (3.5′′ diagonal), bright (4 white LED backlights), and colorful (262,000 different shades)!

The TFT display has 480x320 pixels and individual pixel control. It has significantly higher resolution than a black and white 128x64 display. As an added bonus, this TFT display includes a resistive touchscreen, allowing you to detect finger presses anywhere on the screen.

The control and driving circuit of TFT displaymodules is low voltage and FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:

This small 3.5-inch touch screen module is designed specially for Arduino UNO. This is ideal for DIY anywhere, anytime, and does not require any separate power source or case to hold it. The screen also comes with a stylus to interact with the small screen.

It3.5 Inch TFTfeaturedArduino LCD Display Module,Compatible with Arduino Mega 2560. Direct connection can be made on Arduino.Arduino Mega Lcd Displaycan be used asNOTE:This screen has no touch feature.Form Color: Black

The 3.5inch TFT LCD Module is based on ILI9481 LCD driver that includes Micro SD slot. This module gives nice picture quality and works well with Arduino Uno and Arduino Mega controllers. This kind of module is not a touch screen display. No...

Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Orissa, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttaranchal, Uttar Pradesh, West Bengal and major cities including Ahmednagar, Aizawl, Ajmer, Akola, Alappuzha, Aligarh, Allahabad, Alleppey, Almora, Alwar, Amarnath, Ambattur, Ambernath, Amravati, Amritsar, Anantagir, Anantapur, Andaman, Araku, Arrah, Asansol, Aurangabad, Avadi, Ayodhya, Ayurveda, Badrinath, Bally, Bandhavgarh, Bangalore, Baranagar, Barasat, Bardhaman, Bareilly, Baroda, Bastar, Bathinda, Beach, Beaches, Begusarai, Belgaum, Bellary, Bhagalpur, Bharatpur, Bhatpara, Bhavnagar, Bhilai, Bhilwara, Bhimtal, Bhiwandi, Bhopal, Bhubaneswar, Bhuj, Bidar, Bihar, Bijapur, Bikaner, Bilaspur, Bird, Bodh, Bokaro, Brahmapur, Bulandshahr, Calicut, Chail, Chamba, Chandigarh, Chandrapur, Chennai, Chennai, Cherai, Cherrapunji, Chidambaram, Chikhaldara, Chopta, Coimbatore, Coimbatore, Coonoor, Coorg, Corbett, Cotigao, Cuttack, Dadra, Dalhousie, Daman, Darbhanga, Darjeeling, Davanagere, Dehradun, Delhi, Devi, Devikulam, Dewas, Dhanaulti, Dhanbad, Dharamashala, Dhule, Dindigul, Diu, Dudhwa, Durg, Durgapur, Dwaraka, Etawah, Faridabad, Farrukhabad, Firozabad, Flowers, Gandhidham, Gandhinagar, Gangotri, Gangtok, Gaya, Ghaziabad, Gir, Goa, Gopalpur, Gorakhpur, Great, Gulbarga, Gulmarg, Guntur, Gurgaon, Guruvayoor, Guwahati, Gwalior, Hampi, Hapur, Haridwar, Haveli, Hills, Himalayan, Hisar, Hogenakkal, Horsley-Hills, Howrah, Hubballi-Dharwad, Hyderabad, Hyderabad, Ichalkaranji, Idukki, Imphal, Indore, Islands, Itangar, Jabalpur, Jaipur, Jaisalmer, Jalandhar, Jalgaon, Jalna, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kadapa, Kakinada, Kalyan-Dombivali, Kamarhati, Kanchipuram, Kanha, Kanpur, Kanyakumari, Karawal Nagar, Kargil, Karimnagar, Karnal, Karwar, Katihar, Kausani, Kedarnath, Keoladeoghana, Khajuraho, Khammam, Kirari Suleman Nagar, Kochi, Kodaikanal, Kolhapur, Kolkata, Kollam, Konark, Korba, Kota, Kotagiri, Kottakkal, Kovalam, Kozhikode, Kudremukh, Kullu, Kulti, Kumaon, Kumarakom, Kurnool, Kurukshetra, Lakshadweep, Latur, Life, Loni, Madurai, Malpe, Manas, Mango, Maravanthe, Margoa, Mau, Meerut, Mira-Bhayandar, Mirzapur, Moradabad, Mount, Mumbai, Mussoorie, Muzaffarpur, Nalanda, Nanda, Nanded, Nandi-Hills, Nashik, National, Navi Mumbai, Nellore, Netravali, Nizamabad, Noida, North Dumdum, Orchha, Ozhukarai, Pali, Panipat, Parbhani, Patiala, Patnitop, Pattadakkal, Pondicherry, Puducherry, Pune, Puri, Purnia, Pushkar, Rajahmundry, Rajgir, Rameshwaram, Rampur, Ranchi, Ranikhet, Ranthambore, Rohtak, Rourkela, Sagar, Sangli-Miraj & Kupwad, Sariska, Satna, Shillong, Sikar, Solapur, South Dumdum, Sri Ganganagar, Srinagar, Surat, Tezpur, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirappalli, Tirunelveli, Tirupati, Tirupur, Tumkur, Udaipur, Ujjain, Vaishali, Vasai-Virar, Visakhapatnam, Vishakhapatnam, Vizianagaram, Warangal, Warangal, Wayanad, Yercaud, Zanskar, Nagpur etc. You may buy latest electronics components, accessories and development boards from us at affordable prices. Buy Raspberry Pi, Arduino, AVR, ARM, 8051 Development Boards, Wireless and Wired, Microcontroller and ICS, Robotics & Accessories, Prototyping Components, Educational Kits etc. We also provide technical assistance for products purchased from our store and supplement it with schematics, code examples and demonstrations.

Shield for Arduino Uno consisting of a TFT LCD display with 3.5" resistive touch screen, ILI9486 graphic controller, 480x320 pixel resolution, 65,000 colors, white LED backlight, SD card slot and SPI interface. Ideal for creating applications that need to display data, photos and videos. Suitable for interfacing with Arduino Uno, it is also compatible with Fishino, Nucleo, Xnucleo, MAKERUNO and UNO PLUS (see related products).

Alibaba.com offers 621 arduino tft lcd products. About 67% % of these are lcd modules, 14%% are lcd touch screen, and 6%% are integrated circuits （old）.

This is a 3.5-inch 320 * 480 resolution TFT color screen. It supports working boards such as Arduino uno and Arduino mega2560 and Arduino due. Also supports STM32, 51 and other conventional microcontrollers.

When using this screen, you do not need any wiring operations, just plug onto your arduino board, we will provide the corresponding Arduino library files, the development code is open source, you can use arduino and this screen to build some applications.The backlight always on, can not control the backlight, backlight is connect to 3.3V.