lcd screen vs led screen price

LED-vs-LCD? Lately, choosing a TV has become like walking into a candy store. There are so many TV technology options to choose from, and each of them seems just as good.

Then there are the technical terms to deal with, such as LED TV, LCD TV, QLED TV, UHD TV, OLED TV, and more. You might feel like you need to be a tech pro just to watch your favourite TV show in the evening or enjoy a game with your friend.

Here at Dynamo LED, we offer both LED and LCD TVs, and we appreciate the benefits of both TVs. Be sure to check out our buying an LED Display guide for more info.

First, an important thing to understand is that the LED (Light Emitting Diode) monitor is an improvised version of the LCD (Liquid Crystal Display). This is why all LED monitor is LCD in nature, but not all LCDs are LED monitors.

LCD technology revolutionized monitors by using cold cathode fluorescent lamps for backlighting to create the picture displayed on the screen. A cold cathode fluorescent lamp (CCFL) is a tiny fluorescent bulb. In the context of this article, LCDs refer to this traditional type of CCFL LCD TVs.

LED monitors took the old technology a step further by replacing the fluorescent bulbs with LED backlight technology. And OLED (organic light-emitting diode) technology improves it even further by eliminating the need for backlighting.

The quality of direct-view LED screens is measured by pixel pitch. The pixel pitch is the distance between two adjacent LEDs on the display. The smaller the pixel pitch, the better the quality of the image.

Since LEDs replace fluorescent bulbs with light-emitting diodes, LED TVs are more energy-efficient than LCDs. A 32-inch LED TV screen consumes 10 watts less power than the same size LCD screen. The difference in power consumption increases as the size of the display increases.

Light-emitting diodes are considerably smaller than fluorescent lamps used in LCD monitors. Fluorescent lamps have a considerable thickness, but the thickness of diodes is next to none. Moreover, countless diodes are assembled in the same plane, so the thickness of the array isn’t increased no matter how many diodes are present.

Edge-lit LEDs have a slight drawback in viewing angle compared to LCDs, because of the position of the light source. However, direct-view LEDs offer a better angle for viewing than LCDs as the light source is evenly spread on the screen.

Since LED displays use full-array LED backlighting rather than one big backlight, LED TVs offer significantly better contrast than LCDs. LCD backlighting technology only shows white and black, but LED backlighting can emit the entire RGB spectrum, thereby providing a deeper RGB contrast.

If you wonder which display will last longer, this debate is also won by LED displays. LED televisions have a longer lifespan of 100,000 hours on average, compared to 50,000 hours provided by LCD televisions.

An LED display provides the option to dim the backlight, along with other eye comfort features. Not only that, it provides a wider viewing angle without harming image quality. Therefore, an LED display is far better for your eyes than an LCD.

In an LED display, a lot of smaller diodes are used and if a diode is damaged, it can be replaced. In an LCD, you will need to replace the entire bulb in case of damage. Therefore, an LED display is easier and cheaper to maintain than an LCD.

Since LEDs are a better and newer technology, the price of an LED display is higher than an LCD. However, this is only when we are considering the purchase cost.

The picture quality of an LED display is far better than an LCD. Due to modular light-emitting diodes, an LED screen produces better control over the contrast, rendering a clear picture. Also, LED provides RGB contrast, which can show truer blacks and truer whites.

Not to forget, they provide a shorter response time as well. Both of these factors result inLED displays having a better picture quality compared to LCD displays.

Since LED displays are considerably thinner than LCDs, they weigh considerably less. On average, an LED screen weighs about half of an LCD screen of the same size.

As you might have noticed by now, LED wins the battle with LCD without any doubt. This is because LED displays have an advantage in all the factors that matter when considering a purchase, except price.

Even when you consider the price, you will find that while LED technology is costlier, it provides better value for money in the long run. This is because of the longer lifespan and easier maintenance of LED screens.

They are more attractive too. With the increasing shortage of space in new residential complexes, what better solution than an ultra-thin LED display giving a cinematic experience in the comfort of your home.

LED screens are the first choice among the public today, across generations. All are opting to switch to LED from LCD to make their lives more enjoyable and better.

If you spend long durations in front of a screen, it"s essential to make the best choice when buying one. Getting a high-quality screen will go a long way in enhancing your gaming, working, and watching experience. Additionally, it will help relieve eye strain even with prolonged use of the screen.

There are tons of screens available in the market today. However, LED screens and LCD screens are by far the most popular. But what is the difference between LCD vs. LED screens?

LED screens feature light-emitting diodes lights installed in the screens. The screens can be volatile or static, with some of them only responding to touch. Other LED screens will display pictures even when turned off.

Some of the benefits of LED monitors nclude enhanced picture quality and local dimming. Local dimming helps to dim down certain areas of your TV"s backlight. This helps to make the screen appear darker and better in displaying blacks.

Local dimming helps a lot in enhancing your screen"s contrast ratios. The higher the levels of the contrast ratios, the more enhanced difference between blacks and whites.

LED backlighting is an essential feature in offering realistic pictures. The features enhance the popularity of the LED screens (check out the Viewsonic TD2230 Review).

The main difference between LCD and LED displays is that the LCD screens come with a layer of liquid crystals. The liquid crystal layer is put between two plates. Images are made when light passes through parts of the liquid crystal.

The liquid crystal part either block or enhance an area which helps to create the image. Most LCD panel types have LED lights that help bring out the image.

Older LCD screens and use Cold Cathode Fluorescent Lamps (CCFLs) to light the screen. The CCFLs use electron discharge and fluorescence to light the screen.

LEDs like the one from our "Dell Computer Ultrasharp 24.0-Inch Screen LED Monitor Review" are taking over the market while LCD screens with CCFLs are fading away. LCD screens are used in watches, some notebook computers, and calculators.

OLED stands for organic light-emitting diodes, and it uses an organic compound to create outstanding high-contrast images - OLED screens are more environmentally friendly. They are also thinner than a standard LED screen as they don"t require a thick LED backlighting behind the screen to illuminate it.

On the other hand, you have QLED screens that are created and patented by Samsung. The QLED screens offer more crisp images as they create light with a shorter wavelength.

The Q in QLED stands for Quantum Dot (see Quantum Dot and IPS). The screens have an additional layer between the LCD screen and the backlight of the monitor. The layer allows light to pass through easily and produce better colors than an ordinary LED screen.

Slimmer design:LED screens to come in a slimmer design than their LCD counterparts. This gives them a sleek and elegant look, and it also takes less space.

Cheaper to run:If you are trying to cut down on energy cost, an LED screen will be a better option between the two as it is more energy-efficient. However, LED screens are more expensive than their LCD counterparts. As such, you can expect to pay more initially.

Better color:If you want to enjoy more realistic images, LED will be the better option. The screen offers you better color than other screens in the market. Additionally, it offers a better contrast, which is the range between the darkest blacks and brightest whites on the screen. The enhanced contrast ensures you end up with the most realistic images.

However, if you are working on a tight budget, you may consider an LCD screen. Besides the cost, LED performs better than the LCD screen in all the other aspects.

If you want to find out the type of screen you already have, you can check out the screen"s model number. The model number can tell you if the screen is an LED or LCD.

When it comes to picture quality, LED TVs look better than older LCD TVs. Manufacturers also make a big deal out of LED backlighting because sets that use the technology are usually more energy-efficient than CCFL LCD TVs. Therefore, the money you save on your power bill could eventually offset the extra cost of an LED TV.

You"ll be happy with the picture regardless of what kind of display you buy. Still, LED TV have a few practical advantages that make them a better purchase than the older LCD TVs.

With an LED light, the pixels are either edge-lit or backlit. As such, the lights behind the screen are designed to light up all the pixels in your monitor at once.

An edge-lit monitor may not be the best for picture quality as the lights are only at the edges of the screen. However, screens with edge lighting have become very popular nowadays as the best budget choice. The edge lights allow for the creation of thin monitors at a low price which enhances their affordability.

If you are working in an office, you may have to spend eight or more hours in front of your monitor. If you keep looking away from the screen due to eye fatigue and strain, it will affect your productivity. The eye strain can also cause headaches to some people.

LED monitors feature better dimming options without sacrificing picture clarity. They also come with features that reduce eye strain, making them the ideal option if you are spending long hours in front of the screen.

Alternatively, you can go for LCD screens that offer arefresh rate of 120Hz or more. The LCD screens also offer a wider variety of viewing angles, which can offer better comfort.

A perfect monitor for gaming should offer you a high refresh rate, low lag, and low response times. A screen response time refers to how fast the pixels change from one image to the next. Lag refers to the delay you experience between pressing a button and seeing the corresponding action on your screen.

You can trust an LED monitor to offer you the best resolution for the most precise and crisp images. This enables you to enjoy clear and lifelike images.

When choosing between LED and LCD monitors, there are several factors to consider. Besides the backlighting technology, you should also consider the panel type - see also what types of monitors are there. Various panels have their benefits compared to others.

LED monitors tend to be more expensive than LCD screens, thanks to LED technology being newer and featuring pricier components. Additionally, there is a newer form of LED called the OLED, which stands for Organic Light-Emitting Diodes. These OLED displays are extremely expensive, especially at high resolutions. LED technology, on the other hand, is extremely cheap and readily available.

Are you lost on the best choice between LCD and LED monitors? If you spend a lot of time in front of your monitor, you should ensure you end up with the best quality screen. This will ensure that you get high-quality images and also minimize eye strain.

In the battle between LCD and LED displays, LED comes out as the better option. It offers more crisp and clear images, and it also comes with a sleek and elegant design. However, it can be a little expensive. If you are working on a budget, LCD monitors can make a perfect choice.

LED technology has improved drastically in recent years improving picture quality while driving costs down. LED is a bigger investment up front but generally has a lifespan of about 100,000 hours. LCD is cheaper and generally more familiar. A LCD screen typically has a lifespan of about 50,000 hours.

Sort of. Older technologies like LCD technology and Plasma displays are becoming obsolete due to the intrinsic properties of LEDs like brightness, efficiency, maintainability, and sustainability.

LCD screens emit blue light and thus negatively affects not only vision but also overall health. Continual extended screen time mainly can impact your eyes in two major ways. When we look at a screen, our blink rate drops significantly, thus causing digital eye strain.

The modern era has shown a tremendous switch from LCD to LEDdisplay. The innovative introduction of LED screensin the television market, at best quality and decent pricing, has taken the market by storm. Every individual is switching rapidly from LCD to LEDscreens. The reason for the switch lies in the innumerable benefits Led has to offer to its clients. Here at Dynamo LED, we offer both LED and LCD, and we appreciate the benefits of both technologies.

An liquid crystal display) uses CCFL’s, which is more power-consuming than LED. The CCFL dissipates more light than the LED, and hence they even tend to make the television warmer to touch with prolonged use. This even makes the LCD more prone top catching fire than the LED televisions.

The LED is lighter weighted and easily portable compared to LCD television. The LED is also more affordable and economical than the LCD now. The long-lasting superior quality makes it more worth to invest in an LED than an LCD.

Eye safety is a major concern in today’s modern era, where people are always working in front of a laptop or computer screen. It is recommended by experts to invest in LED displayscreens to work on desktop, laptops, or even watch television. The LED have far better display panel in the prospective of eye safety, picture quality, and power consumption. Both LC and LED make use of Liquid crystal display, but the difference lies in the backlight, which is majorly responsible for the effect on the eyes. The regular LCDs use a cold fluorescent cathode display backlight, and the LED uses Light Emitting diodes. The LED backlighting is smaller and much safer for the eyes.

The picture quality of the LED display is far better than the LCD. The LED uses an RGB contrast, which makes the pictures almost come alive on the television screen giving its viewers an enjoyable experience.

Though these benefits make LEDs the first choice, it is important to state very clearly that LEDs are not at all cheap. Though the long durability, high-quality picture, the energy-saving feature, and eye safety technology makes it worth the investment compared to less durable and little lower quality LCD display. Why settle for less when the bigger and better product is available at a little higher price,, giving innumerable benefits to its consumers. The LED may be bulkier in price but definitely worth it.

Besides better picture quality, LED Televisions are also energy efficient. They consume very little energy compared to LCD televisions. There is an almost 50% reduction in the power consumption for LED televisions.

It is often claimed that LCD TVs’ lifespan is around 75,000 hours, whereas with LED TVs, you can expect up to 100,000 hours. This is clearly 25% more on average, so LEDs are the clear winner here.

The LED is often regarded as a third-generationdisplay. It meets the demands and preferences of the new generation very much. They are more attractive in designs too. With the increasing shortage of space in the new residential complex, what better than the ultra-thin LED display giving a cinematic experience in the comfort of your homes. LEDs are the first choice among the public today, be it the old generation or the new young youth. All are opting for a switch to LED from the LCD to make lives more enjoyable and better.

From panel technology to refresh rates, there are a lot of things to consider when looking for a new gaming monitor. To aid you on your journey for the perfect setup, we"re breaking down two of the most common display technology terms: LED and LCD. Here"s what you need to know about LED and LCD screens, what the terms stand for, and how they factor into modern gaming monitors.

LCD stands for liquid-crystal display, which refers to how the monitor works. Behind the screen, liquid crystals are sandwiched between two layers of glass and used to change the colors of pixels to create the images that you see. The whole process is a lot more complicated, but that"s the gist of how LCDs function.

In the past, some LCDs were backlit by CCFLs (cold-cathode fluorescent lamps). LCDs with fluorescent backlighting have been around longer, so if you can find one, they will be cheaper than LED monitors. However, if you"re a gamer looking for decent refresh rates and response times, it"s going to be hard to find a monitor with fluorescent backlighting. They"ve almost completely been replaced by LCD monitors with LED backlights.

LEDs work in a similar way; in fact, you can consider LEDs a subcategory of LCDs. The only difference between some LCDs and LEDs is the type of backlighting: LEDs use LED (light-emitting diodes) backlighting.

In contrast to fluorescent backlighting, LED backlighting generally provides brighter colors and sharper contrast. The monitors are also thinner in size and, in the long run, more energy efficient than LCDs with fluorescent backlights. LED backlighting is the newer technology and the current standard for monitors with high refresh rates and fast response times. When you see LCD in product descriptions, they"re almost always LCD monitors that use LED (as opposed to fluorescent) backlighting. For example, BenQ"s EL2870U monitor is listed as an LCD, but it"s an LCD with LED backlighting.

There are different types of LED backlighting: edge-lit and array-lit. In edge-lit monitors, the lights are placed around the edges of the monitor. Light guides are then used to diffuse the light evenly across the screen. In array-lit monitors, lights are placed behind the screen in a pattern.

For example, some edge-lit and array-lit LEDs have local dimming capabilities, a feature that can selectively dim certain zones of LED lights. Local dimming improves contrast ratio and provides deeper blacks in dimly lit scenes. These monitors, however, tend to be pricey. Some well-reviewed options include the Samsung Odyssey G7 and Philips Momentum 436M6VBPAB, both of which are edge-lit monitors with partial local dimming capabilities. The Acer Predator X35 is an (expensive) full-array monitor with full local dimming (FALD) capabilities.

You won"t have much of a choice between LED or LCD. Most monitors, regardless of whether they"re marked as LED or LCD, will use LED backlights. LED backlights became the new standard because they allow manufacturers to make thinner, more energy-efficient monitors with better graphics. It"s not worth going out of your way to find an LCD with fluorescent backlighting, unless you really, really hate LED lights.

Which backlights a monitor has isn"t as important as other factors such as panel technology, refresh rates and response time, G-Sync vs. FreeSync, and HDR --those are the characteristics you should pay more attention to when choosing a monitor. If you"re not looking to break the bank, a couple of great LED monitors at excellent price points we can recommend are the Asus VP249QGR, a nice budget 1080p monitor, and Acer XF250Q Cbmiiprx 24.5, a well-reviewed budget 240Hz monitor.

Check out our guide to the best cheap gaming monitors for more budget options; plus, see our picks for the best monitors for PS5 and Xbox Series X, best 144Hz monitors, and the best 4K gaming monitors for more LED displays worth picking up.

If you use your laptop for basic tasks, you’ll get along just fine with the default screen, but if you’re a gamer or like to stream movies from your home computer, then investing in a monitor will help elevate your experience.

LCD monitors have been around longer, so they’re more affordable. However, LED monitors are more energy-efficient, lighter and support 4K resolutions.

LCDs feature a layer of liquid crystal embedded between two panels. Images are created when fluorescent lamps behind the screen shine through the crystals and illuminate them.

There are various types of backlights used in LCD monitors, but the most common is cold cathode fluorescent lamps. Essentially, the lights used for CCFL displays are akin to those you see in offices, classrooms and stores, except much smaller.

The first few generations of LCD monitors and televisions used this type of backlight and while you can still find LCD monitors with this backlight, it"s becoming less and less common.

Since it’s an older technology, LCD monitors are generally much cheaper than LED monitors. However, despite being less advanced, they still provide a high-quality image. They’re also better suited for brighter environments like living rooms and kitchens since they provide an overall brighter image.

LCD monitors are also less prone to suffer from burn-in image issues. Burn-in refers to an image becoming “stuck” on the screen. This can happen if a static image is left displaying on the screen for too long. Image retention is more likely to happen if you’re a gamer since some video games feature heads-up display elements that rarely move out of place.

Because of the backlight, LCD monitors are bulkier and thicker than LED monitors. They’re also much less energy-efficient due to the energy required to power the fluorescent lamp backlight.

Finally, you’ll get a crisp 1080p high-definition resolution using an LCD monitor, but if you plan to stream 4K content, it’s best to steer clear from them as most LCDs don’t support 4K.

An LED monitor is also an LCD monitor since it also uses a liquid-crystal screen. However, this specific type of display where the backlight is composed of light-emitting diodes instead of fluorescent lamps. You can imagine light-emitting diodes as a series of tiny light bulbs.

Most LED displays feature edge lighting, which means that the LEDs are positioned around the edge of the screen. Some LED displays have a wide-array setup where the LEDs are placed all over the screen.

The overall image quality of an LED monitor is superior as well. Producing true black contrasts is an issue with LCDs due to the type of backlight, but LED screens reduce this problem significantly.

LED displays also have a fast refresh rate and low lag, which makes them ideal for gamers. Also, unlike with older LCD monitors, you’ll be able to stream 4K content.

Since LED monitors are the newer technology, they’re considerably more expensive than LCD monitors. There’s also a higher risk of image retention with LED displays.

This screen is relatively basic but it’s the best LED monitor you’ll get at its price point. It’s sleek, provides a crisp image and comes with both HDMI and VGA ports.

Although the initial price point of an LED monitor is higher, they’re more energy-efficient and have a longer lifespan. You’ll end up saving money in the long run, which makes it a much better investment than an LCD screen.

Even though some say the picture quality of an LED TV is better, there is no straight answer for which has better picture quality since both TVs use the same kind of screen. For instance, a higher-end LCD TV can have a better quality than a low-end LED TV, but if you look at high-end models of either TV, the picture quality will be comparable.

RGB Dynamic LEDs show truer blacks and whites and thus get higher dynamic contrast ratio (which is desirable in a TV), at the cost of less detail in small bright objects on a dark background (such as star fields)

LED TVs use energy-efficient light emitting diodes (LED) for backlighting. These consume less power than cold cathode fluorescent lamps (CCFL) used in traditional LCD televisions. Power savings are typically 20-30%.

Edge-LEDs (the most common) are positioned around the rim of the screen and use a special diffusion panel to spread the light evenly behind the screen.

Flat Screen LCDs, about an inch or two thick are more expensive, but also more popular because of their sleek look and the flexible options of standing on a surface or mounting on a wall.

Front projection LCDs or projectors, which project an image onto the front of the screen. The TV itself is just a box installed anywhere in a room, which projects the image onto a flat screen hung on the wall as large as 300 inches.

Rear projection LCDs, where the image is sent from the rear of the TV to the screen in front. Rear projection LCDs are wide, heavy and only available in large sizes (60" and up).

Shopping for a new TV is like wading through a never-ending pool of tech jargon, display terminology, and head-spinning acronyms. It was one thing when 4K resolution landed in the homes of consumers, with TV brands touting the new UHD viewing spec as a major marketing grab. But over the last several years, the plot has only continued to thicken when it comes to three- and four-letter acronyms with the introduction of state-of-the-art lighting and screen technology. But between OLEDs, QLEDs, mini-LEDs, and now QD-OLEDs, there’s one battle of words that rests at the core of TV vocabulary: LED versus LCD.

Despite having a different acronym, LED TV is just a specific type of LCD TV, which uses a liquid crystal display (LCD) panel to control where light is displayed on your screen. These panels are typically composed of two sheets of polarizing material with a liquid crystal solution between them. When an electric current passes through the liquid, it causes the crystals to align, so that light can (or can’t) pass through. Think of it as a shutter, either allowing light to pass through or blocking it out.

Since both LED and LCD TVs are based around LCD technology, the question remains: what is the difference? Actually, it’s about what the difference was. Older LCD TVs used cold cathode fluorescent lamps (CCFLs) to provide lighting, whereas LED LCD TVs used an array of smaller, more efficient light-emitting diodes (LEDs) to illuminate the screen.

Since the technology is better, all LCD TVs now use LED lights and are colloquially considered LED TVs. For those interested, we’ll go deeper into backlighting below, or you can move onto the Local Dimming section.

Three basic illumination forms have been used in LCD TVs: CCFL backlighting, full-array LED backlighting, and LED edge lighting. Each of these illumination technologies is different from one another in important ways. Let’s dig into each.

CCFL backlighting is an older, now-abandoned form of display technology in which a series of cold cathode lamps sit across the inside of the TV behind the LCD. The lights illuminate the crystals fairly evenly, which means all regions of the picture will have similar brightness levels. This affects some aspects of picture quality, which we discuss in more detail below. Since CCFLs are larger than LED arrays, CCFL-based LCD TVs are thicker than LED-backlit LCD TVs.

Full-array backlighting swaps the outdated CCFLs for an array of LEDs spanning the back of the screen, comprising zones of LEDs that can be lit or dimmed in a process called local dimming. TVs using full-array LED backlighting to make up a healthy chunk of the high-end LED TV market, and with good reason — with more precise and even illumination, they can create better picture quality than CCFL LCD TVs were ever able to achieve, with better energy efficiency to boot.

Another form of LCD screen illumination is LED edge lighting. As the name implies, edge-lit TVs have LEDs along the edges of a screen. There are a few different configurations, including LEDs along just the bottom, LEDs on the top and bottom, LEDs left and right, and LEDs along all four edges. These different configurations result in picture quality differences, but the overall brightness capabilities still exceed what CCFL LCD TVs could achieve. While there are some drawbacks to edge lighting compared to full-array or direct backlight displays, the upshot is edge lighting that allows manufacturers to make thinner TVs that cost less to manufacture.

To better close the local-dimming quality gap between edge-lit TVs and full-array back-lit TVs, manufacturers like Sony and Samsung developed their own advanced edge lighting forms. Sony’s technology is known as “Slim Backlight Master Drive,” while Samsung has “Infinite Array” employed in its line of QLED TVs. These keep the slim form factor achievable through edge-lit design and local dimming quality more on par with full-array backlighting.

Local dimming is a feature of LED LCD TVs wherein the LED light source behind the LCD is dimmed and illuminated to match what the picture demands. LCDs can’t completely prevent light from passing through, even during dark scenes, so dimming the light source itself aids in creating deeper blacks and more impressive contrast in the picture. This is accomplished by selectively dimming the LEDs when that particular part of the picture — or region — is intended to be dark.

Local dimming helps LED/LCD TVs more closely match the quality of modern OLED displays, which feature better contrast levels by their nature — something CCFL LCD TVs couldn’t do. The quality of local dimming varies depending on which type of backlighting your LCD uses, how many individual zones of backlighting are employed, and the quality of the processing. Here’s an overview of how effective local dimming is on each type of LCD TV.

TVs with full-array backlighting have the most accurate local dimming and therefore tend to offer the best contrast. Since an array of LEDs spans the entire back of the LCD screen, regions can generally be dimmed with more finesse than on edge-lit TVs, and brightness tends to be uniform across the entire screen. Hisense’s impressive U7G TVs are great examples of relatively affordable models that use multiple-zone, full-array backlighting with local dimming.

“Direct local dimming” is essentially the same thing as full-array dimming, just with fewer LEDs spread further apart in the array. However, it’s worth noting that many manufacturers do not differentiate “direct local dimming” from full-array dimming as two separate forms of local dimming. We still feel it’s important to note the difference, as fewer, further-spaced LEDs will not have the same accuracy and consistency as full-array displays.

Because edge lighting employs LEDs positioned on the edge or edges of the screen to project light across the back of the LCD screen, as opposed to coming from directly behind it, it can result in very subtle blocks or bands of lighter pixels within or around areas that should be dark. The local dimming of edge-lit TVs can sometimes result in some murkiness in dark areas compared with full-array LED TVs. It should also be noted that not all LED edge-lit TVs offer local dimming, which is why it is not uncommon to see glowing strips of light at the edges of a TV and less brightness toward the center of the screen.

Since CCFL backlit TVs do not use LEDs, models with this lighting style do not have dimming abilities. Instead, the LCD panel of CCFL LCDs is constantly and evenly illuminated, making a noticeable difference in picture quality compared to LED LCDs. This is especially noticeable in scenes with high contrast, as the dark portions of the picture may appear too bright or washed out. When watching in a well-lit room, it’s easier to ignore or miss the difference, but in a dark room, it will be, well, glaring.

As if it wasn’t already confusing enough, once you begin exploring the world of modern display technology, new acronyms crop up. The two you’ll most commonly find are OLED and QLED.

An OLED display uses a panel of pixel-sized organic compounds that respond to electricity. Since each tiny pixel (millions of which are present in modern displays) can be turned on or off individually, OLED displays are called “emissive” displays (meaning they require no backlight). They offer incredibly deep contrast ratios and better per-pixel accuracy than any other display type on the market.

Because they don’t require a separate light source, OLED displays are also amazingly thin — often just a few millimeters. OLED panels are often found on high-end TVs in place of LED/LCD technology, but that doesn’t mean that LED/LCDs aren’t without their own premium technology.

QLED is a premium tier of LED/LCD TVs from Samsung. Unlike OLED displays, QLED is not a so-called emissive display technology (lights still illuminate QLED pixels from behind). However, QLED TVs feature an updated illumination technology over regular LED LCDs in the form of Quantum Dot material (hence the “Q” in QLED), which raises overall efficiency and brightness. This translates to better, brighter grayscale and color and enhances HDR (High Dynamic Range) abilities.

And now to make things extra confusing, part of Samsung’s 2022 TV lineup is being billed as traditional OLEDs, although a deeper dive will reveal this is actually the company’s first foray into a new panel technology altogether called QD-OLED.

For a further description of QLED and its features, read our list of the best TVs you can buy. The article further compares the qualities of both QLED and OLED TV; however, we also recommend checking outfor a side-by-side look at these two top-notch technologies.

There are more even displays to become familiar with, too, including microLED and Mini-LED, which are lining up to be the latest head-to-head TV technologies. Consider checking out how the two features compare to current tech leaders in

In the world of TV technology, there’s never a dull moment. However, with this detailed research, we hope you feel empowered to make an informed shopping decision and keep your Best Buy salesperson on his or her toes.

But how do you know which tech­nol­o­gy is right for your project? As we look at dig­i­tal sig­nage solu­tions, there’s one ques­tion that always seems to pop up. What’s the dif­fer­ence between Direct View LED and LCD displays?

LED and LCD dis­plays are both good tech­nolo­gies, and which is bet­ter depends on your appli­ca­tion. LCD is a liq­uid crys­tal dis­play. Com­mer­cial LED dis­plays are a grid or group of Light-Emit­ting Diodes or LEDs that make up the image itself. To make things even more con­fus­ing com­mer­cial, or Direct-View LEDs, are actu­al­ly very dif­fer­ent than their con­sumer LED cousins. Here are the basics to help you under­stand what’s the dif­fer­ence between LED and LCD dis­plays and which is bet­ter for your project.

LCD dis­plays are an option for either indoor or out­door sig­nage. The LCD screen is a series of lay­ers, like an onion. LCD dis­plays have light­ing on the base lay­er. Then comes the LCD sheet, which is a liq­uid housed between two plates. On top is a pro­tec­tive glass lay­er. If the dis­play is meant for the out­doors, a final coat­ing is added to pro­tect against the ele­ments- whether they’re nat­ur­al, like weath­er, or human-caused, like vandalism.

Here’s where the dif­fer­ence starts to get mud­dy. LCD screens can be back-lit by LEDs. Mean­ing the light­ing lay­er con­sists of many lit­tle LEDs that light the LCD sheet from behind. In the con­sumer world, these are mar­ket­ed as LED screens. While accu­rate, it’s not the same as a com­mer­cial LED screen. When we talk about com­mer­cial LED’s we’re talk­ing about Direct View LEDs, but we’ll get into that more later.

LCD dis­plays come in Full-HD (1080p) or Ultra-HD (4K) res­o­lu­tion. 4K res­o­lu­tion has four times the pix­els as 1080p. What does this mean in the real world? At about thir­teen feet away from a 98 inch 1080p dis­play, you can begin to see pix­els. With 4K res­o­lu­tion, this decreas­es to sev­en feet before see­ing pixels.

Direct View LED use LEDs as the indi­vid­ual pix­els that make up the image itself. Pix­el pitch is an impor­tant con­cept with Direct View LED dis­plays. Pix­el pitch is the dis­tance from the cen­ter of one pix­el clus­ter to the cen­ter of the next pix­el clus­ter in a LED screen. This can range from .7 mm- 18 mm plus depend­ing on the view­ing distance.

A Direct View LED dis­play is made up of dif­fer­ent pan­els. These pan­els can be grouped into var­i­ous shapes pro­vid­ing flex­i­bil­i­ty and scal­a­bil­i­ty. Unlike LCD dis­plays, Direct View LED video walls don’t have bezel lines between each pan­el. Var­i­ous Direct View LEDs fea­ture bezel-less pan­els which are placed togeth­er like build­ing blocks. This LED tech­nol­o­gy cre­ates a seam­less view­ing expe­ri­ence even for large-scale video walls.

Direct View LEDs can be curved, con­vex or con­cave. They can even wrap entire­ly around a pil­lar, the full 360 degrees. Since they’re pan­els, they can be con­fig­ured in almost lim­it-less sizes and aren’t con­fined to the 16x9 aspect ratio.

Sizes:LCD Dis­plays come in sizes pro­vid­ed by the man­u­fac­tur­er and aren’t that easy to cus­tomize. Some man­u­fac­tur­ers have stretch sizes, but most of the options are at a 16x9 aspect ratio.

Res­o­lu­tion: LCD Dis­plays typ­i­cal­ly have a high­er res­o­lu­tion than LED screens. So, a cus­tomer can view the screen at a clos­er dis­tance with­out see­ing the pixels.

Bezels:If you’re look­ing for a video wall option, LCD dis­plays do have bezels around each dis­play. Con­verse­ly, some Direct View LEDs don’t have any vis­i­ble bezels, so there will be no line breaks in your content.

Bright­ness:Direct View LEDs can range from 800–8,500 nits, which exceeds the bright­ness of most LCDs. Bright­ness may or may not be an issue, depend­ing on if the dis­play will be indoors or outdoors.

These basic fea­tures out­line the dif­fer­ence between com­mer­cial LED vs. LCD dis­plays. Which is bet­ter? It’s a ques­tion that can’t be answered with­out con­text. The specifics around your project and what you’re try­ing to achieve will define which tech­nol­o­gy should be used. Work with an inte­gra­tor that under­stands both tech­nolo­gies and can make a rec­om­men­da­tion based upon your project. There’s no one-size-fits all solu­tion, but devel­op­ing a bet­ter under­stand­ing of com­mer­cial LED vs. LCD dis­plays will help you for­mu­late the right ques­tions to ask an inte­gra­tion partner.

Sometimes the distance between good and great seems like hardly any distance at all — such as liquid crystal displays (LCDs) versus light-emitting diode (LED) displays. Both are suitable for retail window signage, campus wayfinding or large video walls. But LCD and LED have significant differences, and their specific benefits are worth understanding so you can choose the best displays for your business needs.

LCD is the broader category; LED is a subset. In other words, all LED displays are LCDs, but not all LCDs are LED. LCDs are made up of hundreds of thousands — even millions — of individual pixels built from liquid crystals. Each pixel is capable of displaying a color when it receives an electrical charge. Like a mosaic, the displayed image is built from tiny elements that combine to form the overall picture.

But the liquid crystals don’t produce any light of their own, so in order for the image to be illuminated, the liquid crystals need to be backlit. LCDs are illuminated by cold cathode fluorescent lamps (CCFLs), evenly positioned behind the pixels so that, at least in theory, every part of the screen is evenly lit and at consistent brightness.

Up to a point, LED displays are much the same. An LED screen also uses liquid crystals to generate color — or pure black (no color), by not charging a specific pixel. So LED displays have the same need for backlighting. But rather than CCFL, tiny individual lights (light-emitting diodes) illuminate the liquid crystals.

The individual LEDs can be arranged one of two ways: full-array or edge-lit. For edge lighting, the LEDs are arranged around the edges of the back of the screen. Full-array, on the other hand, calls for many LEDs to be lined up evenly across the back of the screen, where they can be arranged into zones (usually called “dimming zones” or “local dimming”).

Is LED just plain better than LCD? Well, for a while, LCD screens represented the cutting edge of digital signage. But now, about the only meaningful advantage of LCD over LED is price point. As LCD is becoming outdated, it tends to be less of an upfront investment. In every other respect, though, LED displays have the advantage.

No matter the arrangement of the backlighting, LED has a greater nit value than LCD, which means it’s brighter (“nit” comes from the Latin “nitere,” meaning “to shine”). The average nit value for LCDs is between 500 and 700 nits, while LEDs are typically between 1,200 and 2,400 nits. With greater brightness comes greater contrast, and all-day visibility on outdoor displays.

Despite the energy output, higher brightness doesn’t necessarily mean a shorter lifespan. In fact, LED displays have an average lifespan of 10 years — double the average five-year lifespan of LCDs. Factoring longevity into the cost of your signage, LED’s longer lifespan can make it cheaper than LCD in the long run.

Even with edge lighting, LED produces more vividly lifelike images than CCFL-backlit LCDs — and with sleeker hardware, thanks to their minimalist design. And while LCD bezels have drastically reduced over time, they’re still greater than zero. LED has no bezels at all.

Full-array backlighting requires a little more depth to the screen, but with discrete dimming zones, LEDs can be illuminated far more precisely — which, in turn, means more accurate and engaging visuals.

LED isn’t the first technology to realize miniaturization is the way forward. Even as screens get bigger, the next big step is made of smaller parts: microLEDs.

Up to 40 times smaller than regular LEDs, microLEDs allow backlighting to be even more precisely targeted, with many times more diodes. This, in turn, delivers a more accurate picture, with greater contrast and highly focused areas of brightness. Samsung’s The Wall is a spectacular example of what microLED is capable of.

Whether you need your digital signage to entertain, inform or simply impress, understanding the differences between LCD and LED will allow you to make a better-informed decision.

With best-in-class picture quality and exceptional durability,Samsung LED displayscan help your business deliver content that engages, informs and entertains.Samsung’s trade-in program makes it easy for businesses to upgrade their video wall with LED technology. Once you’ve chosen your displays, learn how you can configure and tailor their real-time messaging using an integrated CMSin this free guide.

For companies interested in jumping into the world of video walls, or even upgrading your existing technology, the biggest question you’ll have to deal with is whether LED or LCD is right for your video wall.

Technically, LED displays are just LCD displays. Both use Liquid Crystal Display (LCD) technology and a series of lamps placed at the back of the screen to produce the images we see on our screens.

The main difference between the two technologies is that for LCD displays, the lamps at the back of the screen are fluorescent, whereas LED displays use Light Emitting Diodes.

There are two types of LED backlighting technologies; edge lighting and full array lighting. In edge lighting – as the name suggests – the LEDs are placed along the edge of the screen whereas in full-array lighting, an array of LEDs spans the back of the LED screen. In both cases, local dimming may or may not be used. The majority of LED displays are edge-lit without local dimming.

Image quality is one of the most contentious issues when it comes to the LED vs. LCD video wall debate. LED displays generally have better picture quality compared to their LCD counterparts. From black levels to contrast and even colour accuracy, LED displays usually come out on top. Among LED screens, full-array back-lit displays with local dimming provide the best picture quality. There is usually no difference in terms of viewing angle. This instead depends on the quality of glass panel used.

The question of viewing distance may crop up in LED vs. LCD discussions. In general there is not a huge distance between the two technologies. If viewers will be watching from up close the screen needs a high pixel density regardless of whether your video wall uses LED or LCD technology.

It’s generally accepted that LED displays have the lowest energy consumption levels of all displays. LCD displays commonly consume more energy than plasma and CRT displays, neither of which are in production.

In their research, CNET found that “No question, LED LCDs have the lowest energy consumption” in a comparative test between plasma, LCD and LED displays.

LED displays also win in terms of thickness, or lack thereof The reason, once again, being the advanced lighting technology. To start with, light emitting diodes are much smaller compared to the fluorescent lamps used in LCD displays.

Secondly, when the LEDs are placed at the edges as opposed to the back end of the display, the resulting screen will obviously be thinner. This explains why edge-lit LED screens are the slimmest displays available.

If your main concern is budget, then LCD is the obvious choice. As this article points out, you can usually buy a much bigger LCD display for vastly less money than an LED. LCD video walls are generally much cheaper compared to similar sized LED displays.

LCD software allows you to select the right amount of output for a video wall. You can plug a media player into a video wall processor or a daisy chain of displays. With LED displays, however, all cabinets have to plug directly from the video encoder or player. Either that or all cabinets have to be daisy chained together.

Having considered all of these factors, you should now be excellently equipped to pick a display for your video wall. Be sure to take good care of your screen for maximum longevity.

One of the most common questions we’re asked when assisting businesses establish their digital signage systems is whether an LED or an LCD display is best for their business. The answer is always contextual to the clients’ needs. It starts by clarifying what the difference between the two actually is.

When we’re talking aboutconsumer products such as computer monitors and televisions the first thing to know is that an LED screenis an LCD screen, but an LCD screen is not always an LED screen. An LED monitor or television is just a specific type of LCD screen, which uses a liquid crystal display (LCD) panel to control where light is displayed on your screen.

For the display to be considered an LED screen, it means it is utilising ‘Light Emitting Diodes’ to generate the light behind the liquid crystals to form an image. A non-LED LCD screen has backlights (called fluorescent lamps) behind the screen that emit white light which cannot pass through the liquid crystals until an electric current is applied to the liquid crystals which then straighten out and allow light to pass through.

This is where it can get easy to divert away from giving clear advice on whether as LED or LCD display is best for your business, because consumer displays differ from commercial displays. We are not trying to give the reader direction on which monitor is best for their gaming set-up, but which screen type is ideal for communicating your business’ messages.

Commercial LED displays are typically referred to as Direct View LED. This is because they use LEDs as the individual pixels that make up the image itself. Using a surface array of LEDs removes any need for a liquid crystal display panel, which carries noticeable benefits for particular uses.

While LCD flat panels are available in resolutions of 1080P and 4K UHD, Direct View LED displays are measured by pixel pitch. Pixel pitch is the distance from the centre of one pixel cluster to the centre of the next pixel cluster in an LED screen. The smaller the pitch, the closer viewers can get to the display before they see the pixels themselves. Outdoor configurations may have a pitch of 10mm to 40mm, as they are viewed at longer distances.

For use indoors, where viewers would be closer to the display, a pitch of 10mm or less would be required, some have even sub-1mm pixel pitch. When considering Direct View LED displays, it is important to know the minimum viewing distance required. Multiplying the pixel pitch by 1,000 gives you a good rule of thumb for the minimum viewing distance.

Direct view LED displays can either use discrete oval LEDs which are basically one single self-contained diode, or Surface Mounted Device (SMD) LEDs. SMD LEDs contain 3 individual light-emitting diodes bunched together. Either way, it’s the light-emitting diodes that create the images you see on screen. This is explained in the image below, courtesy of LG Electronics

Commercial LCD screens are more closely related to their consumer counterparts like TVs but there are still differences to be aware of. It is not advised to simply purchase an LCD TV from your local electronics retailer and install it in a public setting and expect it to function as desired.

Both have been designed to be used differently. Commercial display manufacturers understand that their displays are going to be exposed to far different conditions than a living room television will be. The componentry in a commercial display is optimised to allow for the display to be on 24 hours a day, all year around. They take into account diverse environments such as hot kitchens, high foot traffic, and bad weather,ensuring the product won’t fail in such exposures. The addition of more durable and resistant technology means commercial LCD displays will typically be priced higher than their consumer cousins.

Brightness: When deployed in areas with strong ambient lighting, even the best LCDs can appear washed out and difficult to view, especially when from an angle. Direct view LEDs for outdoor applications can reach 9,000 nits, making them a brighter and better choice for most outdoor applications.

Contrast: Direct View LEDs can turn off pixels that aren’t being used which allows for a higher contrast and therefore a richer image in varied lighting conditions.

Size and shape: Direct view LED-based walls can be flat, curved, wrapped around pillars and more. With no size limit or set aspect ratio they can be used more flexibly than LCDs. Plus, panels have no bezels which means you can piece together Direct view LEDs to create large and uniquely shaped displays with no visible interruptions between units.

Lifespan and servicing: Most direct view LEDs are rated to last 10 years, compared to a typical 5 years for LCDs. Further, they can be easily replaced on-site, reducing maintenance costs.

Tougher: If you’re using an LCD for any outdoor application or one where the unit has to be protected from extreme temperatures or humidity, you’re going to need to include an enclosure and have an understanding of how to properly seal and vent the unit. Outdoor Direct view LEDs, on the other hand, are purpose-built to withstand harsh environments.

Price: The higher upfront cost of Direct LEDs could be the biggest sticking point when it comes to pitching a video wall. While prices have been steadily dropping, Direct view LEDs are still more expensive than LCD alternatives. However, make sure you consider the lifetime cost of the solution and other benefits mentioned above before you discount direct view LEDs.

Functionality: LCD screens can offer a wider range of functionality when it comes to set-up, display settings, and day-to-day control. There is also the addition of touch screen options for LCD displays which are a fairly sought-after feature these days.

Resolution: Whilst the fine pixel pitches available in direct view LEDs today make for impressively resolute images, LCD screens still boast are more uninterrupted image when viewed up close, particularly with the modern 4k displays. This makes them a better option for smaller retail stores, quick service restaurants or office meeting rooms.

Screen brightness is impressive in a variety of locations and from any viewing angle, resolution is extremely clear from a viewing distance of 5ft and above.

As earlier stated, intended use for the display will determine which format you invest in. In outdoor environments or areas with high ambient lighting, brightness is the key concern. For indoor environments, the key concern is image quality and contrast. It’s also imperative to consider the usage environment and what the screen may be exposed to with regards to weather, temperature, humidity, direct contact and other factors. If you have a good understanding of your requirements for content, application, perception and budget then your first move should be to contact a supplier, like Black Lab Design, and we will be able to assist you with designing, building and installing the perfect digital display solution for your business.

Chances are, the screen that you"re reading this article on is either an LED, OLED, or an LCD display. These are just three of the many display types out there in the wild. On the surface, they all seem the same. But deep down, they couldn"t be more different.

So, when it comes to OLED vs. LCD—or OLED vs. LED—what are the differences? Here"s a look at these three display technologies, what makes them different, and which one is the best.

LCD stands for "liquid crystal display". The early roots of LCD displays stretch back to 1888 when German scientist, Friedrich Reinitzer, discovered an odd substance. It was a liquid that had the molecular structure of a solid. It was later named "liquid crystal."  After decades of study, someone eventually saw the potential for this strange substance to be used for displays.

The first LCD displays to be used on consumer devices were on digital clocks back in 1968. The technology developed over the following years, being put into numerous other devices.

LCD display panels are divided into layers. The backmost layer is a light source. This is a translucent sheet that disperses light from bulbs at the bottom of the display.

OLED stands for "organic light emitting diode." During the 1970s, scientists were experimented with organic materials that can emit light. In 1987, scientists at Eastman Kodak developed an OLED display that consumed a low amount of energy. And in 2007, Sony unveiled the world"s first OLED television: the Sony XEL-1.

The light from an LED is emitted from an electrical current going through an organic compound. That organic compound is sandwiched between a positively charged anode and a negatively charged cathode. The cathode is rich in electrons, and the anode is rich in electron "holes". Electron holes are areas in an atom where there is no electron.

On the other side of the OLED, the electrons flow from the cathode. The electrons then flow to the emissive layer, where they meet the holes. Since the electrons are sent through a voltage, they are "excited", meaning that they have an excess of energy.

When they meet the electron holes, they have to lose that excess energy in order to relax to the ground state for that atom. They release that energy in the form of photos (light particles). From there, the light travels through the red, blue, and green sub-pixels, just like with an LCD display.

LED displays are virtually indistinguishable from LCD displays. The only difference is in how the two types of displays get their light. Instead of using a translucent sheet, LED displays use individually LEDs. There are three primary arrangements of LEDs in the displays.

Full array LED displays have the LEDs arranged evenly throughout the display. This is the preferred arrangement on higher-end TVs. There are a lot of LEDs behind the panel, which means that local dimming is possible.

The direct-lit arrangement can appear to be similar to full array, but there are some differences. With the direct-lit arrangement, the LEDs are also dispersed evenly throughout the panel, but there are far less of them. Because of this, direct-lit displays can not do local dimming. This arrangement is present on lower-end devices.

A display is usually judged by its ability to create vibrant colors. This is an area where OLEDs come out on top. Compared to OLED displays, LCD displays often appear washed out and not as saturated. This is why OLED displays are becoming more popular in the smartphone market.

OLED displays can also produce images with higher contrast than the other two technologies. Since all of the OLEDs on the panel can be turned on and off individually, darker areas of the display can go as dark as they need to.

Full array LED displays come in right behind OLED displays because, like in the case of OLED displays, the LEDs in an LED display can be controlled individually. Full array LED displays use a method called "local dimming", a technique of shutting off LEDs completely in areas that are darker.

LCD displays come in last place because in order for any pixels to be visible, the entire back panel has to be lit. This means that completely black areas are impossible to achieve.

In terms of price, LCD displays are typically cheaper. High definition LCD displays can run you no more than a few hundred dollars. Since LED displays offer better contrast over LCD, you can expect there to be an added price premium.

When it comes to power consumption, OLED scores a win. Since the OLEDs are powered individually, the display only gives power to the ones that need it. Pixels can be turn off completely when there are blacks in the picture.

Full array LED displays come in second place because of the local dimming functionality. Certain LEDs can be completely turned off when the scene calls for blacks. Even though they have this feature, more energy is consumed per LED because the light has to pass through all of the layers of the LCD before reaching the viewers" eyes.

LCDs are the least power efficient. Regardless of the presence of blacks in the scene, the entire panel needs to be lit. This means that the light source is shining at 100% the entire time.

Each display technology has its benefits and its drawbacks. LCD displays are for people who want to save more money, while LED displays are for people who would like to spend more for a bit more contrast in their picture. You"ll spend more on the TV, but it will have a less significant impact on your electricity bill.

OLED displays are for those who want the best of all worlds. They produce the best contrast with the most vivid colors. You will be paying the most for the actual device, but the more power efficient display technology will help even out some of that cost.

While a standard LCD screen uses fluorescent backlights, an LED screen uses light-emitting diodes for backlights. LCD screens usually have superior picture quality, but they less brightness than the LED screens. And some backlight configurations create better images than the LED screens. So, LCD display is good for Indoor of Commercial Display and LED display is good for outdoor of Commercial Display.

In the traditional sense, Digital Signage Media Solution products in a broad sense refer to display terminals that publish information or product advertisements in public places. At present, these products are mainly used for "indoor" commercial advertising applications. The indoor display mainly uses LCD display technology, because of its high resolution, fine colors, stable product performance, and easy installation and maintenance. Due to the "outdoor" special use environment, commercial advertising display products are required to have high brightness, protection, and durability.

The COVID-19 has made 2020 a turning point for the entire industry. Due to the further development of LCD panel display technology, the cost of high-brightness products continues to drop, and many digital signage product suppliers are also turning their attention to the outdoor advertising market. During the period of low demand for traditional applications, we saw new opportunities for digital signage products in the outdoor advertising application market.

According to research by relevant institutions, due to the impact of the epidemic in the first half of the year, the shipments of outdoor digital signage machines dropped sharply. In order to improve corporate profitability, most digital signage product manufacturers are turning their attention to the rising demand for outdoor markets, mainly in the transportation sector (Bus stations and other land transportation platforms), and the fast-growing self-service ordering display in the fast-food (QSR) retail application scenario. Secondly, during the epidemic, many stores added Digital Signage with Hand Sanitizer that can display posters, videos, and highly interactive in order to attract traffic. The creation of digital stores also promoted the growth of digital signage demand to a certain extent. Furthermore, due to the need for prevention, control, and isolation, manufacturers have taken longer to develop products. Therefore, during the epidemic period, the maturity of display terminal technology is catalyzed. The LCD & LED display technological competition during the epidemic has promoted the maturity o