1602 blue lcd module arduino price

This Arduino compatible 1602 LCD with Blue Backlight module is probably the simplest textual display for Arduino. It is a 16 characters wide and 2 row LCD module. Compatible with HD44780 interface. A single LED backlight with white text. Can be easily dimmed with a resistor or PWM, stn- blue LCD negative, white text in blue colour. What"s more! it can be used in any embedded systems, industrial device, security, medical and hand-held equipment.

ERMC1602SBS-2 is 16 characters wide,2 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with white color included can be dimmed easily with a resistor or PWM,stn- blue lcd negative,white text on the blue color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set. It"s optional for pin header connection,5V or 3.3V power supply and I2C adapter board for arduino.

It"s easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held equipment.

Only US$3.73, buy best IIC / I2C 1602 Blue Backlight LCD Display Module For Arduino sale online store at wholesale price.US/EU direct. Tamén hai oferta para 3 e 5 unidades.

Only US$3.73, buy best IIC / I2C 1602 Blue Backlight LCD Display Module For Arduino sale online store at wholesale price.US/EU direct. Tamén hai oferta para 3 e 5 unidades.

Only US$3.73, buy best IIC / I2C 1602 Blue Backlight LCD Display Module For Arduino sale online store at wholesale price.US/EU direct. Tamén hai oferta para 3 e 5 unidades.

With a potentiometer used to adjust backlight (Color: Blue) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm

Very nice modules, easy to read, easy to interface to Arduino. Great quality at a very good price. I keep several around to build up an assembly whenever I need one.

It is another great BLUE backlight LCD display. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.

This is LCD 1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight.

This is great blue backlight LCD display. It is fantastic for Arduino based project. This LCD1602 LCD Display is very easy to interface with Arduino or Other Microcontrollers.

This display overcomes the drawback of LCD 1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which shows a good library and little of coding.

If you already have the I2C adapter soldered onto the board like in this product, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. The LCD display works with 5 Volts. So we go for the 5V Pin.

The values shown on the display can be either a simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

This is great LCD display compatible with arduino. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The adress can be set 0x27.

It is another great blue backlight LCD display. As the pin resources of controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for based project.