tft lcd capacitive touch bezel factory

The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and resolution of 800 x 480 pixels.

tft lcd capacitive touch bezel factory

The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and resolution of 320 x 240 pixels.

tft lcd capacitive touch bezel factory

TFT LCD touch displays are becoming more prevalent every day, in devices that range from consumer electronics to industrial and medical equipment. While design concepts for the use of TFT touch displays are well established, engineering and product design teams often come up against problems that are hard to solve. Following best practices on how to use TFT LCD touch screen can reduce a lot of "hair-pulling".

If the applied ground approach for a device equipped with a TFT touch display doesn’t follow best practices, a variety of issues can arise. Common challenges associated with grounding:

In general, there are two key considerations: keeping ground connections as short as possible, and keep impedance to a minimum. This requirement is particularly critical in ground connections between display housing and touch controller. The diameter of the ground connection also has an effect, though it is less important than length.

Any floating conductive parts near touch sensor can cause erratic behavior in touch function. So they all should the same ground potential as the touch controller.

To address those issues, you need to follow best practices, including physical device assembly and grounding design. And those are just the top challenges, engineer will encounter a range of additional challenges, like longevity, slim design, and so on. Partnering with a hardware provider like Topway, who can advise you at every step along your path to market, is critical. With deep bench of expertise and 20+ years experience on TFT LCD industry, Topway offers you that guidance and ability to speed your time to market.

tft lcd capacitive touch bezel factory

Our new line of 10.1” TFT displays with IPS technology are now available! These 10.1” IPS displays offer three interface options to choose from including RGB, LVDS, and HDMI interface, each with two touchscreen options as capacitive or without a touchscreen.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

tft lcd capacitive touch bezel factory

NMLCD-50800480-CLBis a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a colour TFT-LCD panel, driver IC, FPC and a back light unit and without a Touch Panel (TP),with a Cover Lens Bezel (CLB). The module display area contains 800 x 480 pixels. This product accords with RoHS environmental criterion.

Shenzhen SLS Industrial Co.,ltd established in 2003, is a professional LCD module manufacturer and solution provider. We have 1 full-auto COG assembly line, 2 semi-auto assembly line, backlight assembly line, no dust TP bonding line and manufacturing tech support, we can provide unique, innovative and cost effective LCD module development and manufacturing. Our product range includes: middle-small size TFT LCD, industrial capacitive touch panel... Our LCD products have been widely used in communications, GPS, Equipment, electronic audio-visual, instrumentation, household appliances, PDA and other industries.

tft lcd capacitive touch bezel factory

Riverdi Colour TFT LCD Displays. A range of high quality, cost effective Riverdi colour TFT LCD displays from MikroElektronika. These portrait format displays are suitable for a wide range of industrial and consumer applications and are available in basic or capacitive touch screen versions. Most of the displays are available with a white or black protective bezel. The interface type is I2C/SPI for the 2.8, 3.5 and 4.3 inch displays, and SPI/QSPI for the 5 and 7 inch displays. A MikroElektronika Riverdi click adapter board is available to allow use of the displays with various items of MikroElektronika hardware, see RS ; 136-0795 136-0795. 2.82" Displays, 320 x 240 pixels MIKROE-2156 ( ; 139-3629 139-3629 ) – Non touchscreen MIKROE-2158 ( ; 139-3630 139-3630 ) – Capacitive Touch MIKROE-2159 ( ; 139-3631 139-3631 ) – Capacitive Touch with White Bezel MIKROE-2160 ( ; 139-3632 139-3632 ) – Capacitive Touch with Black Bezel 3.5" Displays, 320 x 240 pixels MIKROE-2161 ( ; 139-3633 139-3633 ) – Non touchscreen MIKROE-2163 ( ; 139-3635 139-3635 ) – Capacitive Touch 4.3" Displays, 480 x 272 pixels MIKROE-2164 ( ; 139-3636 139-3636 ) – Non touchscreen MIKROE-2166 ( ; 139-3637 139-3637 ) – Capacitive Touch MIKROE-2167 ( ; 139-3638 139-3638 ) – Capacitive Touch with White Bezel MIKROE-2168 ( ; 139-3639 139-3639 ) – Capacitive Touch with Black Bezel 5.0" Displays, 800 x 480 pixels MIKROE-2169 ( ; 139-3641 139-3641 ) – Non touchscreen MIKROE-2171 ( ; 139-3642 139-3642 ) – Capacitive Touch MIKROE-2172 ( ; 139-3643 139-3643 ) – Capacitive Touch with White Bezel MIKROE-2173 ( ; 139-3644 139-3644 ) – Capacitive Touch with Black Bezel 7.0" Displays, 800 x 480 pixels MIKROE-2174 ( ; 139-3645 139-3645 ) – Non touchscreen MIKROE-2176 ( ; 139-3646 139-3646 ) – Capacitive Touch MIKROE-2177 ( ; 139-3647 139-3647 ) – Capacitive Touch with White Bezel MIKROE-2178 ( ; 139-3648 139-3648 ) – Capacitive Touch with Black Bezel

tft lcd capacitive touch bezel factory

Riverdi Colour TFT LCD Displays. A range of high quality, cost effective Riverdi colour TFT LCD displays from MikroElektronika. These portrait format displays are suitable for a wide range of industrial and consumer applications and are available in basic or capacitive touch screen versions. Most of the displays are available with a white or black protective bezel. The interface type is I2C/SPI for the 2.8, 3.5 and 4.3 inch displays, and SPI/QSPI for the 5 and 7 inch displays. A MikroElektronika Riverdi click adapter board is available to allow use of the displays with various items of MikroElektronika hardware, see RS ; 136-0795 136-0795. 2.82" Displays, 320 x 240 pixels MIKROE-2156 ( ; 139-3629 139-3629 ) – Non touchscreen MIKROE-2158 ( ; 139-3630 139-3630 ) – Capacitive Touch MIKROE-2159 ( ; 139-3631 139-3631 ) – Capacitive Touch with White Bezel MIKROE-2160 ( ; 139-3632 139-3632 ) – Capacitive Touch with Black Bezel 3.5" Displays, 320 x 240 pixels MIKROE-2161 ( ; 139-3633 139-3633 ) – Non touchscreen MIKROE-2163 ( ; 139-3635 139-3635 ) – Capacitive Touch 4.3" Displays, 480 x 272 pixels MIKROE-2164 ( ; 139-3636 139-3636 ) – Non touchscreen MIKROE-2166 ( ; 139-3637 139-3637 ) – Capacitive Touch MIKROE-2167 ( ; 139-3638 139-3638 ) – Capacitive Touch with White Bezel MIKROE-2168 ( ; 139-3639 139-3639 ) – Capacitive Touch with Black Bezel 5.0" Displays, 800 x 480 pixels MIKROE-2169 ( ; 139-3641 139-3641 ) – Non touchscreen MIKROE-2171 ( ; 139-3642 139-3642 ) – Capacitive Touch MIKROE-2172 ( ; 139-3643 139-3643 ) – Capacitive Touch with White Bezel MIKROE-2173 ( ; 139-3644 139-3644 ) – Capacitive Touch with Black Bezel 7.0" Displays, 800 x 480 pixels MIKROE-2174 ( ; 139-3645 139-3645 ) – Non touchscreen MIKROE-2176 ( ; 139-3646 139-3646 ) – Capacitive Touch MIKROE-2177 ( ; 139-3647 139-3647 ) – Capacitive Touch with White Bezel MIKROE-2178 ( ; 139-3648 139-3648 ) – Capacitive Touch with Black Bezel

tft lcd capacitive touch bezel factory

ER-TFT032A3-3 is 240x320 dots 3.2" color tft lcd module display with ST7789V controller and optional 4-wire resistive touch panel and 3.2 inch capactive touch panel with controller FT6236,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8/16-bit parallel,3/4-wire serial interface. FPC with zif connector is easily to assemble or remove.Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 3.2"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.