brother printer lcd screen blank factory

4. When the screen is blank but power LED light is on, this is a sign the firmware has been corrupted. This can happen if power or network connection is interrupted before the end of the firmware update. The firmware can be recovered provided the printer is connected to a computer via printer USB cable and the computer shows the printer is connected.

Verify the power cord is connected to the back of the machine and the AC power outlet. If the power cord is connected to a surge protector or power switch, remove the cord from the device and connect it directly to the outlet. This is for testing purposes. Removing the device assists in determining if the issue is related to the device or the Brother machine.

Verify the machine is powered ON. The Brother machine has an ON/OFF button located on control panel of the machine. If machine is OFF, the display will be blank.

If the display is still blank, try to tilt or move up or down the LCD display and also try a different known working electrical outlet at your location.

- If the display doesn"t respond but you can hear your machine functioning, your machine will require service. Your machine has a one-year limited exchange warranty. You may use the link below to find a Brother-authorized service center in your area. You may also contact Customer Support for additional warranty options.

2. Verify the Brother machine"s power switch is in the ON position. The machine has an ON/OFF switch located on the right side of the Brother machine.

When the small circle ( o ) on the switch is pressed, the Brother machine will be OFF. When the small dash ( - ) on the switch is pressed, the Brother machine will be ON.

3. Verify the power cord is connected to the back of the Brother machine and directly to the AC power outlet. If the power cord is connected to a surge protector or power switch, unplug the cord from the device and plug it directly into the outlet. Removing the device assists in determining if the issue (blank display) is related to the device or the Brother machine.

6. Verify the outlet is working by plugging a device (a working lamp, radio etc.) directly into the same outlet. If that device does not work, the problem is related to the outlet or circuit. You may also need to check for a tripped circuit breaker. If a wall switch controls the outlet verify that the switch is ON. Another test would be to connect the Brother machine to a completely different outlet.

1. The Brother machine has an ON/OFF button located on the top left side of the machine above the button labeled WiFi. Verify the machine is powered ON.

NOTE: Due to the design of the control panel display, looking at display from certain angles can cause the display to appear blank or light. Stand where you can look at the machine display at a 45 degree angle.

5. If you are having difficulty reading the information displayed on the LCD or it"s too light, try changing the contrast setting. Adjusting the contrast will give the LCD a sharper and more vivid appearance.

1. When the Brother machine is idle for a certain period of time, it enters Sleep Mode. In Sleep Mode, the machine acts as though it is turned off and its LCD will be blank. If you press a key on the control panel, the machine receives a fax or computer data, or you make a copy, the Brother machine will wake up.

- If the Brother machine"s LCD lights up and displays the home screen, the issue is resolved. For more information about Sleep Mode, refer to the solution: "Can I adjust my Brother machine"s Sleep Mode setting?"

- If the LCD is still blank, cycle the power by unplugging the power cord from the outlet, waiting 5 seconds and then plugging the power cord back into the outlet.

2. If the power cord is connected to a surge protector or power switch, remove the cord from that device and connect it directly to an outlet. This is for testing purposes. Removing such devices assists in determining if the blank LCD is related to the device or the Brother machine.

NOTE: To protect your investment against power surges and lightning, Brother strongly recommends that you connect the Brother machine to a surge protector. In particular, we suggest you use a surge protector that is compatible with both standard A.C. power cords and telephone line cords. Surge protectors equipped with telephone jacks will assist in insulating the machine from any power surge that might travel through a telephone line.

Brother produces a wide variety of printers. Read this introduction carefully to determine which steps are right for your printer. This guide offers four different categories of Brother printers: button-only, multi-button one and two, and digital control panels.

The fourth category is for models with touch-screen or digital displays. Use the steps in the fourth category if your display looks something like this:

Before continuing, unplug any wire cables that connect your printer to the network. The factory reset will not complete if your device is connected to the network. Not all Brother printers will have wire connections to the network.

Have you ever wondered how to reset Brother printer? Factory resetting will resolve certain printer errors or malfunctions. Here’s what you need to know to reset your Brother printer.

To do the Brother printer factory reset, you’ll need to unplug the printer. Then enter a sequence of buttons to factory reset your printer. It’s important to know the 4 types of Brother printers to make sure that you’re doing the right reset sequence on your printer.

The button-only printers are the most common type of Brother printers used today. It features a Go button, an on and off button, and several warning LED lights below it indicating a lack of ink, paper jams, etc.

The digital control printers are the most advanced Brother printers available today. It features a touchscreen display screen and a few buttons on the right side of the printer.

How to Fix Brother Printer Touch Screen not Working Error? –Brother Printer is one of the leading tech gaints in the world. The printer is famous for its amazing features and printing quality. However, like other brands, Brother printers also faces technical issues sometimes due to negligence of the user or other reasons. We all know the fact that printers are one of those devices that work on both hardware and software parts. Both of them have their own problem and they are fixed by various methods. Therefore in this blod we are here to provide you the step by step guide on How to Fix Brother Printer Touch Screen not Working Error?

Most of users got panic when they find out that the touch screen of the Brother printer is not working. If you are the one whose Brother printer touch screen suddenly stops working then don’t get frustrated. As we are here to guide you to fix the issue. Read our blog that comprises of the answer of most asked quesstion by the user i.e, How to Fix Brother Printer Touch Screen not Working Error? Our team of experts have sound experience in providing the best possible solutions.

Get in touch with us by dialling our toll-free numbber 800-742-9005 or you can also mail us at support@techsupportexpert.com. We are availabel 24/7 for our valuable customers, therefore connect with us anytime and fix your Brother printer issues by sitting at your place.

Generally the Brother printer touch screen error occurs because of the worng configuartion and it can be fixed by some easy methods. But before following those steps don’t try to do any sort of manually fixing.

Whenever you get stuck in between any Brother printer, this is the first step to fix the problem that you must perform. Press the printer power button and turn it off. After that wait for 60 seconds. Now you need to press the printer power button again. Next try to use the touch screen. If the touch screen is not responding then move on to the next step.

Most of the times due to connectivity issue between the printers power cord and surge board, the touch screen stops working. In order to fix this issue, first of all turn off the printer and then disconnect it from the surge board. Then connect the printers power cord with the main power outlet directly. At last, check whether the Brother printer’s touchscreen issue persists.

The next step is to fix the touchscreen of the printer by reseting it. To perfrom this step, firstly turn on the printer by pressing the power button. After that disconnect the power cord from the back side of the printer. Then wait for few minutes. Now reconnect the power cord at the back side and then turn on the printer. Next see that the touchscreen is working or not.

More often the touchscreen fails to respond because of the outdated or corrupted drivers. You can fix them by updating the printers drivers. Follow the steps to update the printer driver:

The last step that you can perfrom to fix the Brother printer touch screen is firmware update. It is one of the significant part of the printer’s software and if it is not updated properly then you can face lot of troubles.

Therefore fix the issue by updating the printer to its latest firmware version that you will get from the official website of the printer manufacturer. At last verify the touch screen issue.

If the touchscreen issue still persists in the Brother printer then connect with Tech Support Expert. We have a team of skilled and qualified professionals who make sure that you get the right solution of your printer issues. You can reach to us anytime through toll-free number or Live chat. Call us anytime at our toll-free number800-742-9005.

Have a previously functioning Brother HL-L2360DW printer that after plugging into outlet and pressing on button only wifi button is immediately lit, there is no mechanical cycling noise, no characters in LCD display—wifi light does not go off when button pressed, does not power off when power button pressed, none of the other buttons do anything. When unit unplugged then plugged in again, wifi light remains off until power button is depressed. I tried holding power button down then plugging unit in with power button still depressed without any change. I took the unit apart following service manual directions (found on internet), pulled keybutton circuit board, cleaned it as well as the rubber keypad, checked the ribbon cables and reseated them, reassembled without any change.

Actually am able to get unit into USERS mode but unable to reset from there. Only way to clear users mode from lcd is to unplug unit. Any one else experience this?

The LCD screen is vital for operating the printer. Should you encounter any kind of trouble, such as a dead screen, corrupted text, or other issues, please refer to the guide below.

First of all, unscrew the LCD screen from the printer frame, remove both M3x10 screw holding it the LCD board in the plastic casing, and remove it from the casing. See if the problem still appears when the LCD is not pressed by the casing.

Firmware updates are necessary to keep your printer up to date. However, the installation of incorrect firmware can lead to letter corruption on the LCD screen. There"s an easy fix, though:

There is a small chance the printer"s LCD screen can glitch out by electrostatic discharge when inserting the SD card. Try to turn the printer off and on again.

This problem usually appears only on user-assembled printers. If your printer"s LCD screen remains blank or displays corrupted symbols after you turn on the printer, there is a chance it is caused by incorrect wiring. Follow these steps to fix the issue.

Double-check that all cables are properly seated and they are not visibly damaged. Depending on the model of your printer, please refer to the following guides for information on how to make sure the cables are properly connected: Einsy RAMBo electronics wiring (MK3/MK3S/MK3S+) and Mini RAMBo electronics wiring (MK2S, MK2.5, MK2.5S).

If you suspect that the LCD ribbon cables connectors are not firmly seated in the slots, disconnect the LCD ribbon cables and check the slots for any bent pins. If there are bent pins, you can use tweezers to fix them. However, be very careful not to break the pin(s) completely.

If none of the above resolved the problem, turn the printer off again and try to unplug both of the cables, lay them down on a flat surface and gently stretch them. Then plug them back in and turn on the printer.

Is your Brother printer not responding or having difficulty connecting with your computer? If there’s some troubleshooting issue that’s troubling you, restoring your Brother printer to default factory setting may help resolve it.

Restoring to the default factory setting is also an excellent way of protecting sensitive information such as passwords and security settings from outside access. It’s a recommended action if you’re sending your Brother printer for repairs or want to dispose of or recycle your machine.

Why is your brother printer acting so weird? There are a couple of reasons for the brother printer error state message.Improperly placed plugs or USB connection

Sometimes an empty ink or toner cartridge can prompt an error message. Also, make sure that your printer is clear of all paper jams and is stocked with an ample supply of printer paper.

These are the best ways to clear the error state message from your Brother Printer. If troubles persist you may need to contact a Brother service technician.

Rob Errera is an award-winning journalist embedded in the world of printers and printing supplies. Rob has nearly two decades of experience writing about cutting edge technology, business trends, and the ever-evolving industry of printing.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.