seeed 2.4 tft lcd free sample

ER-TFT024-3 is 240x320 dots 2.4" color tft lcd module display with ILI9341 controller and optional 4-wire resistive touch panel and capacitive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8-bit,9-bit,16-bit,18-bit parallel,3-wire,4-wire serial spi interface. FPC with zif connector is easily to assemble or remove.Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 2.4"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

You may wish to have NEWHAVEN NHD-2.4-240320,our part number ER-TFT024-4 should meet this requirment that is the completely the same withNEWHAVEN NHD-2.4-240320.

ER-TFT024-4 is still not our general product ,we don"t have enough stock .You have to email ([email protected]) our sales to buy samples or orders. Besides the minimum order quantity is no less than 500pcs per order.The production lead time is 5-6 weeks.

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big 4"(3.97" diagonal) bright (6 white-LED backlight) and colorful (18-bit 262,000 different shades)! 480x800 pixels with individual pixel control. As a bonus, this display has a optional resistive touch panel with controller XPT2046 and capacitive touch panel with FT6336.

In the case of Wio Terminal the libraries are an amalgamation of Arduino, AdaFruit, and Seeed code wrapped around the official Atmel libraries in a spaghettified mess designed to support multiple devices and chipsets, instead of providing each their own bespoke drivers.

Here"s where the hardware side of things becomes mediocre. The screen is nice and bright, but only supports up to 320x240. Additionally the screen and microprocessor are connected using SPI instead of the faster parallel connection supported by the lcd driver. This requires more processor overhead when rendering, giving you less cycles for actual processing work.

As in just enough for a framebuffer and no other in-memory data; or enough for other data but limited performance by constantly writing direct to the lcd driver (via SPI).

In this Arduino touch screen tutorial we will learn how to use TFT LCD Touch Screen with Arduino. You can watch the following video or read the written tutorial below.

As an example I am using a 3.2” TFT Touch Screen in a combination with a TFT LCD Arduino Mega Shield. We need a shield because the TFT Touch screen works at 3.3V and the Arduino Mega outputs are 5 V. For the first example I have the HC-SR04 ultrasonic sensor, then for the second example an RGB LED with three resistors and a push button for the game example. Also I had to make a custom made pin header like this, by soldering pin headers and bend on of them so I could insert them in between the Arduino Board and the TFT Shield.

Here’s the circuit schematic. We will use the GND pin, the digital pins from 8 to 13, as well as the pin number 14. As the 5V pins are already used by the TFT Screen I will use the pin number 13 as VCC, by setting it right away high in the setup section of code.

I will use the UTFT and URTouch libraries made by Henning Karlsen. Here I would like to say thanks to him for the incredible work he has done. The libraries enable really easy use of the TFT Screens, and they work with many different TFT screens sizes, shields and controllers. You can download these libraries from his website, RinkyDinkElectronics.com and also find a lot of demo examples and detailed documentation of how to use them.

After we include the libraries we need to create UTFT and URTouch objects. The parameters of these objects depends on the model of the TFT Screen and Shield and these details can be also found in the documentation of the libraries.

So now I will explain how we can make the home screen of the program. With the setBackColor() function we need to set the background color of the text, black one in our case. Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center of the screen and 10 pixels  down the Y – Axis of the screen. Next we will set the color to red and draw the red line below the text. After that we need to set the color back to white, and print the two other strings, “by HowToMechatronics.com” using the small font and “Select Example” using the big font.

UTFT Multi-Platform Universal TFT display library Manual http://www.rinkydinkelectronics.com/ (C)2016 Rinky-Dink Electronics, Henning Karlsen Introduction: This library was originally the continuation

2.8"" TFT Touch Shield Introduction 2.8" TFT Touch Shield is an Arduino / Arduino Mega compatible multicolored TFT display with a 4-wire resistive touch screen. It includes an Arduino shield compatible

2.2" TFT Display Created by Ladyada Last updated on 2014-03-31 12:15:09 PM EDT Guide Contents Guide Contents Overview Connecting the Display Test the Display Graphics Library Bitmaps Alternative Wiring

LCD 1602 Shield Description: Arduino LCD 1602 adopts 2 lines with 16 characters LCD, with contrast regulating knob, backlight optional switch, and with 4 directional push-buttons, 1 choice button and1

1.8" TFT Display Breakout and Shield Created by lady ada Last updated on 2015-04-09 03:48:28 PM EDT Guide Contents Guide Contents Overview Breakout Pinouts Breakout Assembly Prepare the header strip: Add

2.8" TFT Touchscreen Created by lady ada Last updated on 2014-12-11 12:00:25 PM EST Guide Contents Guide Contents Overview Connection Options Mounting Options Backlight Wiring TFT Wiring LCD Test Graphics

DATASHEET ADAM Arduino Display Adaptor Module Arduino Compatible Shield P/N: 4Display-Shield-FT843 For the 4D Systems 4DLCD-FT843 Display Document Date: 8 th January 2014 Document Revision: 1.0 Uncontrolled

LCD I 2 C/Serial RX Backpack Data Sheet LCD to I2C/Serial RX Backpack I2C or Serial RX communication with Standard 16 Pin LCD modules Version 203 Sep 2013 Contents Contents 2 Introduction3 Voltage Levels3

Data Acquisition Module with I2C interface «I2C-FLEXEL» User s Guide Sensors LCD Real Time Clock/ Calendar DC Motors Buzzer LED dimming Relay control I2C-FLEXEL PS2 Keyboards Servo Motors IR Remote Control

Character LCDs Created by Ladyada Last updated on 2013-07-26 02:45:29 PM EDT Guide Contents Guide Contents Overview Character vs. Graphical LCDs LCD Varieties Wiring a Character LCD Installing the Header

USB to RS-422/485 Serial Adapter User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2

Thank you for purchasing our product. Please read this User s Manual before using the product. Change without Notice AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL e-4 SAFETY PRECAUTIONS Federal

3.2 inch QVGA TFT Color LCD - User s Guide 3.2 inch QVGA TFT Color LCD User s Guide Version 1 & 2 Give graphics and to your application! EA2-USG-0701 v2.1 Rev A 3.2 inch QVGA TFT Color LCD - User s Guide

a-si TFT for SSD1963 Controller 320xRGBx240 for 3.5 QVGA 480xRGBx272 for 4.3 WQVGA 320xRGBx240 for 5.7 QVGA 640xRGBx480 for 5.7 VGA 800xRGBx480 for 7.0 WVGA 262K color Vresion 3.0 Date:2010/07/05 Date

:» : :.:35152, 2013 2 5 1: 6 1.1 6 1.2 7 1.3 7 1.4 7 1.5 8 1.6 8 1.7 10 1.8 11 1.9 11 2: 14 2.1 14 2.2 14 2.2.1 14 2.2.2 16 2.2.3 19 2.2.4 20 2.2.5 21 2.2.6 Reed Relay 23 2.2.7 LCD 2x16 5VDC 23 2.2.8 RGB

36 46 56 VNSP NSP 72 40 78 77 76 26 71 71 71 27 L200 16 17 18 19 20 55 45 35 81 82 54 44 34 L119 L119 11 12 73 70 13 74 14 15 53 43 33 6 7 8 9 10 75 L200 52 42 32 1 2 3 4 5 51 41 31 >>> sending DMX with

COLOR TFT LCD MONITOR User Manual GENERAL INFORMATION Thank you for choosing our TFT LCD(liquid crystal display) monitor. This product employs integrate circuits, low power consumption, and no radiation

MeshBee Open Source ZigBee RF Module CookBook 2014 Seeed Technology Inc. www.seeedstudio.com 1 Doc Version Date Author Remark v0.1 2014/05/07 Created 2 Table of contents Table of contents Chapter 1: Getting

Better Image Software OSD for IEI LCD Monitors DC Power Input for Mobile Application IEI Quick Mounting Technology Specifications Ordering informations Options Datasheet of DM-121GXS Datasheet of LCD-KIT121GX

ALL-USB-RS422/485 USB to Serial Converter RS422/485 User Manual ALL-USB-RS422/485 USB to RS-422/485 Plugin Adapter This mini ALL-USB-RS422/485 is a surge and static protected USB to RS-422/485 Plugin Adapter.