round lcd display raspberry pi for sale

HyperPixel 2.1 Round has all the great features of our other HyperPixels - crisp, brilliant IPS display, touchscreen, and high-speed DPI interface—it"s just rounder! You can use it with any Raspberry Pi with a 40 pin header* but it works particularly nicely with the Pi Zero footprint - we"ve designed it so you can mount a Zero neatly behind it, so you can"t see the Pi when you look at it from the front.

This version of HyperPixel would be great for custom interfaces and control panels - mounted on a wall it would make a really neat, minimalist smart home controller or a stylish "what"s playing" display for your sound system. Everything is pre-soldered and ready to go, just pop it onto your Pi, install our software, and away you go!

* Please note that standoffs and booster headers are not included with Hyperpixel Round - scroll down or check out the extras tabs for some links. You will need a booster header if you want to use Hyperpixel Round with a full size Pi!

HyperPixel 2.1 Round uses a high-speed DPI interface, allowing it to shift 5x more pixel data than the usual SPI interface that these small Pi displays normally use. It has a 60 FPS frame rate and a resolution of approximately 229 pixels per inch (480x480px) on its 2.1" display. The display can show 18-bits of colour (262,144 colours).

The touchscreen variant is capacitive touch, that"s more sensitive and responsive to touch than a resistive touch display, and it"s capable of multi-touch!**

Hyperpixel Round will work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W. If you"re using it with a full-size Pi then you"ll need a booster header to raise it up over the Pi"s USB ports and extended standoffs if you"d like to bolt it in place. If you"re using a Pi Zero or Pi Zero W you won"t need a booster header, but we have some special short standoffs that will let you attach everything securely together in an extra slim package.

If you"re using standoffs to fasten your Hyperpixel and your Pi together, just screw them into the posts on the underside of the HyperPixel PCB and then secure with screws through the mounting holes on your Pi.

Please note: when installing HyperPixel 2.1 Round onto your Pi make sure not to press down on the screen surface. We recommend putting the screen face down on a soft surface and gently wiggling the Pi to mate with the extended header (or GPIO header). If you need to remove your Hyperpixel, take care not to pull on the edges of the glass display - it"s best to hold on to the rectangular PCB. As the glass edges of this display overhang the PCB they"re quite exposed, so it"s worth being extra careful with them.

With this version of HyperPixel, we"ve separated the display drivers and touch drivers which should hopefully make it easier to incorporate touch interfaces into your own programs. To download and install the display drivers:

Note that you"ll need another display, keyboard, and mouse to install the software, or you could do it remotely over SSH if you set your Pi up headlessly.

HyperPixel uses basically all of the GPIO pins o communicate with the Pi (including the standard I2C pins) so it"s not generally possible to use it with other HATs and devices that connect via the GPIO...

...but we have provided an alternate I2C interface broken out on the back that will let you use I2C devices (like sensor breakouts) at the same time as HyperPixel. There are instructions how to set this up in our Hyperpixel 4.0 tutorial (scroll down to the bottom).

Raspberry Pi OS Bullseye includes major changes to how DPI display drivers work - a quick hack to get the screen working (with some loss of rotation/touch functionality) is to comment out dtoverlay=vc4-kms-v3d in boot/config.txt. We"re working on full support for Bullseye, but if you"re after an easy, fully featured Hyperpixel experience you should probably stick with Buster for now:

PO Box, APO/FPO, Afghanistan, Africa, Alaska/Hawaii, Albania, American Samoa, Andorra, Anguilla, Antigua and Barbuda, Armenia, Aruba, Bahamas, Bangladesh, Barbados, Belize, Bermuda, Bhutan, Bosnia and Herzegovina, British Virgin Islands, Cayman Islands, China, Cook Islands, Costa Rica, Cyprus, Dominica, Dominican Republic, El Salvador, Fiji, France, French Polynesia, Georgia, Germany, Gibraltar, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Haiti, Honduras, India, Iraq, Jamaica, Jersey, Jordan, Kiribati, Kyrgyzstan, Laos, Lebanon, Liechtenstein, Macedonia, Maldives, Malta, Marshall Islands, Martinique, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Nauru, Nepal, Netherlands Antilles, New Caledonia, Nicaragua, Niue, Pakistan, Palau, Panama, Papua New Guinea, Romania, Russian Federation, Saint Kitts-Nevis, Saint Lucia, Saint Pierre and Miquelon, Saint Vincent and the Grenadines, San Marino, Serbia, Solomon Islands, South America, Sri Lanka, Svalbard and Jan Mayen, Tajikistan, Tonga, Trinidad and Tobago, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Ukraine, Uzbekistan, Vanuatu, Vatican City State, Virgin Islands (U.S.), Wallis and Futuna, Western Samoa, Yemen

The official Raspberry Pi 7” Touchscreen allows you to add touch inputs to your programs, creating a new way to interact with your projects. It also makes for a fantastic desktop screen for day-to-day use of your Raspberry Pi. Wrap it in one of our screen cases and take it anywhere – events, Raspberry Jams or even just your friends house for a coding evening!

For smaller projects, LCD and ePaper displays are a fun way to add a visual element to your projects. With simple code and wiring, they’re great for projects that require text, menus and navigation.

The 1.28” Round LCD HAT is a 1.28" display HAT for the Raspberry Pi Pico with a round IPS LCD, 240 x 240 resolution, 65K RGB colours, clear and colourful display and a joystick!

The HAT is designed for the Raspberry Pi Pico and communicates via SPI. It uses a GC9A01 display driver and SPI interface to reduce the number of your Pico"s GPIO pins used by the board.

Kingtechhas been specializing inTFT LCD display and touch screensince 2003.More than 90% of our business is custom made display modules for projects such as industrial devices, medical and smart home applications.Our mission is to provide customer one-stop solution. With LCD display and touch screen as our product center, great trust is built with our customers.

Pico 1.28” Round LCD HAT is a 1.28-inch display HAT with 240 x 240 resolution, 65K RGB colours, clear and colourful displaying effect, and a joystick, designed for the Raspberry Pi Pico to expand its engagement via SPI communication by providing a standard 40 pin Pico GPIO interface. The Pico 1.28" Round LCD HAT includes an incorporated GC9A01 display driver and SPI interface, reducing the number of IO pins required. It features a 5-input joystick that is connected to the Pico 1.28” Round LCD HAT through a stackable GPIO connector header on the inside.

» Makerfabs is Open Hardware, Arduino, Raspberry Pi, mbed, BeagleBone, IoT, Smart Home, etc, Related Products& Services Vendor for Makers and new Startups.

Round LCD HAT is a 1.28-inch display expansion board module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, with a joystick, designed for Raspberry Pi to expand its engagement via SPI communication by providing standard 40 pins GPIO interface. The Round LCD HAT comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins. It is designed with a 5-input Joystick that will be internally connected to the Round LCD HAT via a stackable GPIO connector header.

The Raspberry Pihas no shortage of retro gaming builds, but one of the most fun aspects is housing your build in the right case. In this project, created by maker and woodworker Mw33212, the Pi is housed inside of a beautiful hand-crafted wooden casing complete with two round LCD panels for displays.

This project is one of many that Mw33212 has created, most of which also feature custom wooden cases. Some of our favorites include this portable Pi-powered wooden projector project as well as this Raspberry Pi-based Atari-themed arcade system.

In this case, Mw33212 is using a Raspberry Pi 4 to run the retro gaming platform which seems to be capable of emulating the Nintendo 64. You could easily swap the Pi 4 out for something like a 3B+ or even a Zero depending on what you have on hand or prefer. In addition to the Pi, it also features four speakers for audio output, multiple monitor driver boards, a couple of fans for cooling, and most notably two 3.4-inch circular LCD panels with a resolution of 800 x 800px.

The retro gaming emulation can be handled by RetroPie or Lakka. Mw33212 goes on to verify the efficiency of the round LCD panels which, as it turns out, are not very effective for many games. For the most part, they’re usable for games in which the attention is focused on the center of the screen but anything that relies on icons in the corners is pretty much unplayable.

If you want to make a Raspberry Pi project like this for yourself or just get a better idea of how this one goes together, check out the original thread shared to Reddit for an in-depth look at its build process. Be sure to follow Mw33212 for more cool wooden Pi projects as well as any future updates to this one.

Here at Pi Supply, we have our roots in the open-source and educational values provided by the open source community. The Raspberry Pi is such a fantastic educational tool, and these kits open up even more possibilities for anyone to learn about electronics and programming.

Inside this part of the shop you can find all the bits and pieces you need for your prototyping needs. Here you can kit out your maker station with tools and consumables, as well as other components such as headers, sensors and accelerometers to bring all those epic ideas to life!

Here you can find the range of everyone"s favourite single board computer! The revolutionary Raspberry Pi has brought more possibilities within the grasp of developers than ever before, and here you can get your hands on the board that will bring that next idea to life. The Raspberry Pi has come to us in many shapes and sizes, but whichever model you want or need, this platform is guaranteed to pack a punch!

Take a look at all the original products we have to offer here at Pi Supply! Whether you are looking for self-solder kits or fully assembled HATs, you can explore new horizons with Pi Supply, and do even more to unlock the potential of your Raspberry Pi. Check out our range for LED & IR toys, ePaper applications, power solutions and much more to expand your range of projects.