ford focus mk2 lcd display problems for sale

Received in about 3-4 days. Removed instrument cluster from a 2015 Ford Escape SE. Disassembled instrument cluster with 4 Torx screws and came apart easily. Part was a little different than original. My original had no mounting ears and snapped into the cluster, but it fit just fine and the mounting ears didn"t get in the way of anything. The ribbon cable on the snap in type screen is a little tricky but is doable. Attached pictures show the blank screen (screen was also intermittent). The good picture is after new screen was installed.

This item is a color TFT LCD screen for a 2012 – 2018 Ford Focus. This screen will repair your black or blank speedometer display. Installation is simple. Simply remove the cluster, then remove the front lens and rear panel. The TFT LCD screen will easily pop out without disturbing the gauge needles. The small ribbon cable attached to the screen is also attached to the back of the circuit board. Carefully release the clip on the circuit board and remove the screen with the ribbon attached.

When you receive the new screen, you will reuse the original ribbon. Simply transfer it over to your new TAE screen. No programming is required. After installing your new LCD screen, plug your cluster back into your vehicle and enjoy a working display.

PLEASE NOTE: 2013 Ford Escape uses two different versions of this LCD screen.  With mounting bracket and without, please use the videos below to determine the correct LCD screen.

If you have any questions regarding the Ford Focus Instrument Cluster Speedo Repair MK2 2004-2011, or would know how to remove your instrument cluster then please contact us.

Our Ford Focus instrument cluster repair service will give you better value for money, takes 2-3 working days and comes with an unlimited mile Lifetime Warranty. Not only this but we also engineer-out the faults to ensure that the Ford instrument cluster problems do not return.

We fully test every instrument cluster before and after the rebuild process to ensure every instrument cluster performs as originally intended by the manufacturer and is as good as, if not better than a brand new unit. We test these units on a purpose build HIL (Hardware In-the-Loop) test rig that replicates all driving conditions, this allows us to replicate any fault described by the customer and eradicate Ford instrument cluster problems.

We take a great deal of pride in our work and will always handle your instrument cluster as if it where our own, we understand how important it is for your instrument cluster to always look as good as new when it is fitted back to your vehicle. We rebuild these Ford Focus clusters for both main dealers and independent specialist all over the globe, so you can always be assured of our very high standard of work.

Ford Instrument Cluster Repairs do not have any hidden charges or fees. If there are any possible fees to be added to the total repair costs as extra services, it will be pre mentioned within the comments faults list on the left-hand side i.e (New LCD +£30) next to the fault listed. If any further fees are required to be paid, we will contact you in advance prior to any additional work is undertaken.

The displays are illuminated by LED"s but also contain a colored layer of foil that is embedded between the layers of glass. The green displays have a green colored foil while the red displays have a red colored foil.

Installing a MK2 instrument cluster with green illumination or MK2.5 instrument cluster is perfectly possible. Since 2008 I have done this at least a dozen times. Even an RS instrument cluster is fully compatible with any MK2/MK2.5 Petrol version. Installing an MK2.5 instrument cluster can also be quite cheap. Recently I bought a low mileage, mint condition MK2.5 instrument cluster with large display from a UK based scrap yard I paid less than €100,- including P&P. The Focus MK2/MK2.5 instrument cluster can easily be configured/reprogrammed using a cheap ELM327 in combination with the free ELMconfig and Forscan software.

Do you have a Ford Focus or C-max or Kuga manufactured from 2004 display manufactured by Visteon with following faults: Speedo / Rev counter needles dropping to zero when driving – Warning lights illuminating – Car cutting out & not starting – Immobiliser light flashing & car not starting? – We can fix this!

As fitted to 2004 – 20011 Ford Focus mk2/3 & C-max petrol & diesel model cars, manual gearbox (Single LCD display) or automatic (Twin lcd displays) or even the ‘Highline variant’. Your unit will be fully stripped and repaired it is then fully bench tested. Price includes UK postage & VAT  – A UK VAT receipt is included with you order & includes 1 year warranty – please send your faulty unit to the address below – Refurbishing available ‘while you wait’ by appointment at our workshop in Norwich

This service is for ALL Ford Focus MK2 instrument clusters – There is literally dozens of part numbers, too many to list individually. Example part numbers on unit – 3M5T-10849-HJ / 4M5T-10849-HR / 4M5T-10749-FM / 4M5T-10849-FM / 4M5T-10849-KR / 4M5F-10E853-FB / 4M5F-10E853-BA / 4M5T-10849-HM / 4M5T-10849-HN / 6M5T-10849-xx And all other focus mk2 / 3 clusters similar as photos!

Okay so I managed to solve the problem myself. The cluster"s LCD screen wasn"t working. I managed to purchase a used cluster from Israel off of ebay.com for $75 dollars. Ford Trinidad said because the ebay cluster was used, they could not configure it to work with my car. Anyway long story short, I dismantled the both clusters, and switched out the lcd screens. It worked! If anyone has ever opened and repaired a smart phone, then they can do this. the lcd setup is very similar to a smart phone. In fact, its easier to do. Now my cluster is like new.

And if you go for a mechanic, you will have to pay a lot of bucks. Whereas, if you know how to solve it on your own, you will just need to buy a new display online and replace it. Thus, it’ll not be a big deal.

No worries dear reader. Today, we have got you covered. Just read our article until the end. We will let you know the causes and solutions to the Ford focus information display for not working. Let’s get started.

There might be different reasons for your Ford Focus Information display being unable to function. But the most common problem occurs for the problematicinstrument cluster.

While driving, you may face various types of issues with the instrument cluster. And for this, the information display may flicker, get broken completely, partially fail, or show unusual scenes.

It may happen to a poor electrical connection in the system. Although, the Ford Focus connector isn’t responsible for alternator failure. Yet, it may be a reason for a faulty charging system.

Again, if there is any newer electronics or an electrical connector, it may cause failure in electrical circuits as well. There might be an unpredictable dash instrument cluster performance for this issue also. Moreover, if your car has an underhood connection, then it may even cause a dash display trouble.

By your own: Fortunately, it is possible to do it yourself. By maintaining the aforementioned steps, you can just replace your Ford focus display. You can find a replacement LCD panel for something around 100 dollars!

Look for the sync screen. Click on the menu button then. After that, touch on the down arrow option. At this, the sync settings should be displayed on your screen. Now, click on ok. Touch the down arrow option to get the master reset scenes on your display.