pcap tft display supplier

The 7.0 inch pcap touch screen tft display with cytma568 touch controller IC, support normal operation with gloves, water and 10mm thick tempered glass; industrial application, G+G structure, very good anti-interference performance; mainly used in industries, intelligent home appliance, outdoor portable terminals, medical electronics and other fields. Deep customization acceptable.

1st generation: with flat display area and flat touch area, the border can be curved. Orient Display uses glass touch sensor and IML (In-Mold Lamination) technology to produce the products.

2nd generation: with flat display area and flat touch area, the border area can be flat or cuver in the middle. Orient Display still uses glass touch sensor and cold bending lens to produce this kind of products.

3rd generation: with flat display area and curve touch area, the border area can be flat or cuver in the middle. Orient Display uses glass or film touch sensor and hot bending lens to produce this kind of products.

4th generation: with curve display area and curve touch area, the border area can be flat. Orient Display uses flexible touch sensor to produce this kind of products.

Based on the above five types of touch panel technology, Orient Display can also add different kinds of features like different material glove or stylus or pencil touch, water environment touch, salt water environment touch, hover touch, force (3 dimensional) touch, haptic touch etc. Orient Display can also provide from very low-cost fixed area button touch, single (one) finger touch, double finger (finger+ gesture) touch, 5 finger touch, 10 points touch or even 16 points touch.

Considering the different shapes of the touch surface requirements, Orient Display can produce different shapes of 2D touch panel (rectangle, round, octagon etc.), or 2.5D touch screen (round edge and flat surface to create edge-less impression) or 3D (totally curved surface) touch panel.

Considering different strength requirements, Orient Display can provide low-cost chemical tampered soda-lime glass, Asahi (AGC) Dragontrail glass and Corning highest generation Gorilla glass. With different thickness requirement, Orient Display can provide the thinnest 0.5mm OGS touch panel, to thickness more than 10mm tempered glass to prevent vandalizing, or different kinds of plastic touch panel to provide glass piece free (fear) or flexible substrates need.

Orient Display can also provide full customized or part customized solutions for our customers to enhance the viewing experience. Orient Display can provide all the different kinds of surface treatments, such as AR (Anti-reflection); AG (Anti-glare), AF (Anti-finger print or Anti-smudge); AS (Anti-smashing); AM (Anti-microbial), IMITO (Index Matching Indium Tin Oxide), Anti Sparkling etc.

Orient Display can also provide both dry bonding (OCA, Optical Clear Adhesive), or wet bonding (OCR, Optical Clear Resin and OCG, Optical Clear Glue) to get rid of light reflective in air bonding products to produce high end touch screen monitor much more readable under sunlight and much more robust as well.

Touch panels have been a much better human machine interface which become widely popular. Orient Display has been investing heavy for capacitive touch screen sensor manufacturing capacity and LCD module production ability. With Orient huge production capacity, top notch quality, and competitive pricing, Orient has been working with top LCD panel manufacturers ,AUO, BOE, LG, Innolux and top touch controller manufacturers , Atmel (Microchip, Cypress, Synaptics, Elan, NXP, Goodix, Sharp, Hydis etc. to provide the best touch display technology in the market, such as IPS, MVA, in-cell, on-cell, automotive grade etc.

It is a new technology replace ink printing cover plate with visual area and black border area are integrated with seamless black design using AG/AR surface treatment. Non ink printing AR/AR seamless black optical cover plate can be customized to match touch display module to achieve the best integrated seamless black solution.

Orient Display developed a special smoke film which is very low cost but gives the customer a optical bonding performance. Smoke film uses optical interference to reduce the glass-air interface reflection for air (perimeter) bonding between LCD and touch screen.

Take your product to the next level with a capacitive touch screen LCD by Displaytech. Our PCAP (projected capacitive) touch screen technology is a premium alternative to a resistive touchscreen. We offer capacitive touchscreens for our 2.8-inch, 3.5-inch, 4.3-inch, 5-inch and 7-inch TFT LCD displays.

CDS has recommended the use of thick cover lenses to add extra protection to capacitive touch TFT displays that are being used in harsh environments. These cover lenses can be supplied in thicknesses ranging between 1.1mm through to 11mm and can be added to TFT screen sizes ranging up to 47”!  In cases where the cover lens glass exceeds 4mm thickness, an industrial capacitive IC controller is required.

Tony Large, Technical Director at CDS, said, “The use of cover lenses on capacitive TFT displays gives OEMs that extra reassurance that the displays are sufficiently robust when used in harsh environments. This solution is ideal for a wide range of different applications, including industrial electronics, Gaming, Medical, automation, fire detection, as well as the oil and gas industry. We are currently using this combination of display combined with a thick cover lens for a Gaming client who loves the solution plus we saved them money!”

As TFTs can be susceptible to reflection and glare from bright lights or direct sunlight, optical bonding may be added to between the display and the cover lens to reduce the level of refraction and improve readability. Optical bonding technology can be used in conjunction with thick cover lenses. An alternative solution is to use anti-glare and anti-reflective coating on the cover lens itself.

If you have a specific requirement or project please email us on info@crystal-display.com and we will support you in every way we can and save you money at the same time.

CDS Introduce the new CDS101WS07-CT4, a small scale 10.1 inch LCD TFT for integration. Amazing high performance TFT display with amazing resolution and 140nits of brightness.

With this touch screen you can easily upgrade 12.5” TFT Display, for example LG’s LP125WF2-PB2 to a touch display. On a project basis, we also produce other special PCAP touch screen sizes.

Projected capacitive touch screens are usually briefly called PCAP touch screens. They arerobust, can be easily equipped with protective glass and feature multi-touch function for up to 10 fingers, enabling gesture control.

PCAP touch screens are equipped with a network of electrodes (Metal Mesh, Silver Nanowire, ITO) that project an electromagnetic field that also passes through a thick protective glass. If this field changes at one point due to a touching finger or a stylus, the touch position is calculated and forwarded to the controller. Drag & drop, zoom, rotate or scroll via gesture control is possible.

Due to the glass surface, the PCAP touch screens are particularly scratch-resistant and can be cleaned with all cleaning agents - an important advantage in hygienically sensitive areas.

With special protective glasses, the touch screens are vandal-proof and can be used in public areas. However, the number of touch points may vary depending on the strength of the protective glass used. PCAP touch screens are perfect for modern True Flat designs, as known from smartphones or tablet PCs, and thus ensure an appealing device design. We can offer the touchscreens also optically bonded as a unit with a protective glass and / or a TFT display.

WF40ESWAA6DNG0 is a High Brightness 4 inch Square IPS TFT-LCD display module with projected capacitive touch panel (PCAP); made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), high brightness 800 nits (typical value), anti-glare surface panel, aspect Ratio 1:1.

WF40ESWAA6DNG0 Square TFT LCD display module is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. WF40E model can be operated at temperatures from -30℃ to +80℃; its storage temperatures range from -30℃ to +80℃.

Our goods are commonly recognized and reliable by consumers and may satisfy continually developing economic and social needs for Pcap Touch Screen Manufacturers, Lcd Frame, Tft Lcd Touch, Large Lcd Display,Graphic Lcd Display Module. We sincerely welcome overseas consumers to consult for your long-term cooperation as well as the mutual advancement.We strongly think that we will do superior and far better. The product will supply to all over the world, such as Europe, America, Australia,Jersey, Paris,Mauritania, Kuwait.Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.

Some companies have individual demands and requirements on their LCD panels and that`s why our liquid crystal displays are so individual. We offer individualised display solutions for nearly every requirement. Kit with LCD modules with controller cards and cable set

The drive electronics, cable sets and display systems, available at distronik, are perfectly adapted to your individual wishes and requirements. These display kits are not only compiled, but also tested. The advantages are clear: easy and quick installation of your industrial display and control electronics. The components of our display kits work perfectly together so you don`t have to matter about it.

The biggest advantage of our display solution is that you only have one supplier. That guarantees operative TFT display kits for your visualisation systems.

tft display (Liquid crystal display) are made of liquid crystals that form digital images made visible through ambient light or through LED backlight. LCDs are used in the place of other displays that are less efficient such as cathode ray tubes (CRTs) and have become the most popular tft display type on the market.

Tft display enable metal and position detection without having to physically contact the metal object. They offer a wide range of applications in robotics, rail, material handling, aerospace, military, as well as heavy machinery. Choose from different tft display types, from the shielded versions that have electromagnetic fields concatenated in the front and unshielded applications that allow wider sensing distances. Whether you want to use your sensors for industrial purposes or source for your brand, there is a wide selection of wholesale tftcd to choose from that will suit different applications.

Browse cutting-edge tft display on Alibaba.com at reasonable prices. tft display in varying display size and resolution are accessible on the site. The merchandise are useful in automotive, medical, and industrial screen displays. tft display having multiple interface types and display technology are in stock. tft display on Alibaba.com have high resolution and luminance to display precise details. They have a capacitive touch for convenient use. They can show multiple characters per line. tft display can be manufactured to suit smaller wearable devices or large projectors. They can be integrated with smart home systems for face recognition and office equipment. They feature multiple interfacing types like MPU or RS232.. are sturdy, thanks to a toughened glass structure with a considerable operating temperature range. The life span of tft display stretches up to several thousand working hours.tft display support TFT.

Touch tuning requires technical expertise and in-depth understanding of the application. Custom touch controller algorithms elevate touch and display products to their highest efficiency. That means … [Read more...]

Any object can be placed, moved and deleted at any time. Fonts can be zoomed and rotated without loss. Selected Windows character sets are stored directly in the display. Thanks to automatic ASCII and Unicode switching, all systems are flexibly supported; Chinese characters included.