lcd panel has a line accross it manufacturer

Back in April last year, Lionel blogged about a vertical line issue that could potentially affect customers who own 17" Inspiron 9200, 9300, and XPS Gen 2 notebook LCDs.

After engaging our engineering and product group teams, as well as the LCD manufacturer, to investigate and isolate the cause of this issue, we narrowed the problem down to a specific part within a certain date range. During that research, we found that the part may also affect the Inspiron 6000, 8600, Latitude D800, D810, and Precision Mobile Workstation M60 and M70 LCDs. That led to Lionel"s second blog post on the topic.

We"ve taken steps to contact those who may be affected to offer a warranty replacement and also put in place measures to rectify any out of pocket expense incurred by out of warranty customers who replaced the affected screens in the past.

Since then, comments have hit our forums and blog site about other potentially affected systems and possible causes and fixes for them. We"ve gone back to our engineering and product group teams and verified that the part causing this issue:

That said, there are other variables that can lead to vertical and horizontal lines on other system types regardless of size or model. Lines on an LCD can appear sporadically, at random places on the screen, and for what appears to be for no reason at all. These lines can be caused by normal LCD failures brought on by a multitude of variables, which I"ll try to cover here. Vertical lines tend to be a more common issue in notebooks, primarily because they are subjected to more wear and tear on a daily basis than a desktop LCD.

The most common cause of these lines is simply a loose connection. As notebook systems are carried around, no matter how careful we try to be, they have a tendency to be bumped, jarred, and even sometimes the heart stopping drop. Though today"s notebooks are designed to better absorb and dissipate small shocks, it can still have adverse affects on the notebook"s internal components. A good bump or series of bumps and random movements can cause the LCD cable to become loose. The connection remains intact, but some breaks in the signal can lead to impurities in the reproduction of the image on the screen. Think of a loosely-fastened garden hose… water will still be directed and outputted through the end of the hose, but some water is lost at the connection. This is easily fixed by tightening the hose. Similarly, the LCD can usually be fixed by simply making sure the connection is secure. (Service manuals for Dell systems can be found here on support.dell.com.)

A golden rule of any seasoned technician when it comes to cable connections: don"t just check the connection, reseat it. This applies to more then just cable connections (memory, wireless cards, hard drives, optical drives, etc…) There are a few reasons for this, the first being temperature. With so many components designed into such a small case, heat is inevitable. These temperature variations can lead to things like "chip creep" and oxidation. Removing the cable and firmly, but carefully reseating it should solve this problem by not only making sure that the connection is properly seated, but also that the pins are free from oxidation.

The second reason is debris. If you"ve ever opened up your notebook to clean the keyboard or for maintenance, you might see any number of things such as food particles, hair, paper, dirt and dust. Some of these objects are small enough to get into the connections and cause problems. This is one of the reasons that regular cleaning of your notebook and desktop PCs should be done. The problems caused by debris can usually be quickly cleared up by a can of compressed air and a little time and effort.

If these simple fixes don"t seem to work, then we need to look at the actual failure possibilities. Vertical or horizontal lines that don"t disappear after the basic troubleshooting are usually caused by circumstantial failures. The most common type of failure that leads to lines on the display is an open circuit connection between the driver IC (flexible circuit board) and LCD glass. This is usually caused by external stresses (mechanical, thermal, etc…), which causes the flex circuit to detach from the glass. The variables leading to the detachment are wide and are dependant on individual cases. With the amount of travel and various operating environments of a notebook, pinpointing the exact cause can be near impossible, unless of course the problem immediately follows a catastrophic event such as dropping the notebook or prolonged exposure to heat or cold, such as leaving the system in a car.

Investigations into technical problems, including which systems, batches, and date ranges are affected, are rigorous, and we strive for accuracy. Unfortunately, not every technical problem can be traced down to the root cause. But in every case, we try to proceed appropriately and in all fairness to affected customers.

If you are experiencing any problem with lines on your LCD and your system is not one of the potentially affected units, or in the date range outlined in Lionel"s earlier posts, please contact technical support to troubleshoot and identify possible fixes. See below for details on how to do that.

Vertical lines appearing on LCD screen is very common. Whether the screen belongs to a laptop computer or desktop PC, mobile phone, or even a television, the fault is usually due to the ribbon cable and its connections.

A faulty ribbon cable can cause all sorts of havoc manifesting in bright vertical lines. Sometimes they can be coloured lines such as blue, green, grey, black, and red. The lines can appear thick or thin and on just one-half of the screen. Sometimes the fault will manifest as two vertical white lines. You can even get horizontal lines as well.

If you have lines appearing on the LCD screen, then the first simple thing to check is the seating of the ribbon cable that connects the display panel to the motherboard. Most of the time, the fault is with the poor connection made by the ribbon cable.

One of the most common problems with ribbon cables is oxidation of the contacts. It can happen either on the ribbon cable contacts or on the socket contacts. Manufacturers often use a mix of gold and copper for the electrical contacts, however, if they have not used enough gold, then oxidation occurs over time. This results in a working television or laptop screen suddenly exhibiting lines.

The solution is of course very simple, one needs to clean the contacts with a high quality electrical contact cleaner. It is best to clean the socket and the ribbon cable contacts, which will solve the fault.

One of the most common faults with laptops is that the ribbon cable connecting to the LCD panel cracks. It typically fails near the hinge area due to flexing in that region, and over time, some of the tracks on the plastic cable breaks. I have seen these types of faults on many laptops. It does not matter whether it is a Lenovo, IBM, Acer, Samsung, Toshiba, or even a MacBook Pro!

It is also possible to have a dislodged cable, which typically occurs on mishandled laptops. The plastic clip that holds the ribbon cable is very small and delicate and if the laptop receives an impact, the ribbon cable can dislodge.

This type of fault can also occur on LCD televisions; however, it tends to be on new units, where the box has received an impact during transit from the factory.

In this situation, the repair can be easy, as the cable will simply require reseating. However, there is still the labour time to consider as it can take the best part of the day to gain access to the ribbon cable.

If the laptop has a socket that provides a VGA output, then the first thing to do is to hook up another good monitor to it to see if the picture is good. If the picture on another monitor is good, then you can be sure that the video chipset and the motherboard electronics are operating properly, and it is a connection issue.

I used this same method of troubleshooting to repair an LCD television recently. Modern televisions have a video out socket, and if you feed the signal from that to another monitor, you can check for the quality of the video display. If the external monitor does not show lines, then you know for sure that it is a connection issue. Hence, this method of troubleshooting works for some of the modern televisions as well.

When half of the vertical interlace is missing showing a picture that is broken up vertically, the display appears with vertical lines. This is usually due to a cracked ribbon cable.

Generally, for laptops a replacement cable is always required due to it breaking near the hinge. I had this Dell laptop and replacing the LCD ribbon cable solved the problem. I managed to buy a replacement from Dell for a modest price £6.00. The laptop was just outside the warranty period; however, they still shipped out the cable free of charge. This is the reason why people buy Dell. In my experience Dell tend to stand by their customers and products, and their prices for replacement parts are realistic and down to earth.

Replacing a laptop ribbon cable is simple, and the top-half of the laptop, and keyboard needs removing to gain access to the socket on the motherboard side. As you can see, it flexes near the hinge area and breaks where the ribbon cable wraps around the hinge.

Ours is a Sony Bravia that is now over 10 years old. Several months ago we started noticing lines, especially on the left (our left) side of the screen. They’d go away after the tv warmed up. Then we started noticing it was darker on that side of the screen, but again, after the tv warmed up the screen would be normal. Then about two months ago it started getting worse and didn’t ever get completely better, even after the tv warmed up. So I watched some youtube videos that all talked about the ribbon cables becoming loose over time and to apply pressure along the top and see if that made it better, and if so, it was a loose cable and if you put electrical tape or something that would help keep the pressure, it would fix the problem. Hubby pressed along the top and sure enough, when he pressed in one spot on the left side suddenly the picture cleared up. Stayed good for about a week, then problems again, pressed again, fixed again. A week or so later, same problem, but this time when he pressed on it nothing got better.

So I decided to take the cover off and look at it better. As I was pressing on the tops of the ribbon cables that run down from the top of the frame, for a minute it got better but then suddenly there was a wide white vertical line, with a thin green one down the center of it, running down the front of the screen, and it was perfectly aligned with one of the cables. So now I still have the dark side of the screen, and some ghosting, and some lines, but now this bright white streak/line right down the front. Another weird thing is that if the whole screen is bright (like watching a show set in a snowy place) then the darkness even on the left side is basically gone, but if the scene is dark at all, that side is almost black. I don’t know if it means that particular ribbon cable is bad, or if something is loose, if things need to be replaced or what. It’s very frustrating as it’s been a great tv. Hubby wants to just buy a new one, but even if he does I would still like to try and figure out this one as it could then go in another room.

Whether they"re red, green, or blue, vertical lines on a computer monitor aren"t a good sign. Although it could mean your monitor is getting old and may soon need a replacement, it may just be you have a faulty HDMI or DisplayPort cable. Alternatively, it may be your graphics drivers need updating, or you need to restart your monitor or PC.

Vertical lines on a monitor are one of three core problems: the display panel itself is defective, the connection between your computer and the display is faulty, or it"s receiving erroneous information.

There isn"t much you can do about the former unless your monitor is within its warranty period, but the others have some relatively easy fixes which might get rid of the vertical lines on your computer screen.

The first step to getting rid of vertical lines on your monitor is to see if it"s to do with the display itself or some other issue. Open your monitor"s menu system and see if the vertical lines show up even over the top of the menu screen.

If they do, then the problem is with your monitor itself. You"ll need to confirm whether your monitor is within warranty and whether you can return it or consider buying a new one.

If they disappear or aren"t present when you"re looking at the menu, then the problem isn"t to do with the monitor"s display, which means you may be able to fix it.

If your monitor"s menu isn"t in the right place to test whether the lines are on the screen or to do with the connection, you can also unplug the monitor and see if the lines are still present when it is powered on without anything connected to the display.

The exact cause of the vertical lines on your computer screen will only be apparent if and when you fix it, so it"s best to start trying these examples to see what works.

Reseat the cables. Try disconnecting your monitor"s HDMI or DisplayPort cable and plugging it back in again. You can also power cycle the monitor by turning it off and on again.

Update your graphics drivers. If your graphics drivers are outdated, there may be a compatibility issue causing the vertical lines. Update your graphics drivers to see if it resolves the issue.

Try the monitor on another PC. If you can, test the monitor on a different PC. If the lines are still present, the monitor or the cables are to blame and need replacing. However, if you"ve tried all of the above and the lines aren"t there, you may have a problem with your PC itself.

Reset the BIOS. Try resetting the BIOS to its factory defaults to see if an overclock, or power setting is causing system issues to affect the monitor"s display.

Horizontal lines may indicate overheating, physical damage, or a screen resolution issue. To fix the issue, check the monitor connection and resolution, and remove any magnets nearby. Also, turn the monitor on and off, restart the computer, and connect your computer to a different monitor to test it.

If you"re getting the "no signal" message on your monitor, tighten any cables that may be loose and try replacing cables to see if one was faulty. Also, ensure you"re using the correct source input for your display.

To fix ghosting (screen burn) on a monitor, try shutting down the monitor and leaving it off for 48 hours. Another option: Use an all-white screensaver and let it run on your display for several hours. You can also try a software tool that fixes stuck pixels, such as JScreenFix.

So, why there are green lines on a monitor? Well, several factors might be at play if the displays attached to your PC aren’t operating correctly. It’s conceivable that your adapter or cable connection is the problem. Change the cable if it doesn’t work. If nudging doesn’t work, try another.

Throughout this post, we’ll explain why green lines occur on your display and the best techniques to remedy them. The extra information will be invaluable in fixing all of your monitor’s green lining concerns. It’s time to delve in!

There are a variety of possible causes for horizontal green lines or vertical lines on your computer screen, from outdated video card drivers to damaged ribbon cables and improper video cable connections. To determine whether the problem is software or hardware, you may examine the BIOS settings.

When you see a green line on your computer screen, you should inspect your display for any faults, including all the connectors. There might be a problem with the cable causing the monitor’s color to lose signal.

It would help if you examined the possibility that your computer has been infected with a virus or other malicious software. While this isn’t one of the most prevalent reasons for a green vertical line on the display, it’s still possible.

Faulty graphics drivers might also cause problems with your monitor’s connection to the computer. However, although this is the most common symptom, it may also be seen in the form of green lines on a monitor.

Because Windows 10 does not contain the BIOS, any horizontal or vertical striations on your display problem result from a software problem. If you don’t see any horizontal or vertical lines on your Windows 10 computer screen, this is likely a hardware problem.

It’s possible that your computer’s drivers don’t cause the flickering green lines on your display if they occur immediately after the computer has started up and not on the initial screen while the machine is starting up.

The status of “This device is operating well” indicates that the hardware failure has no problems connecting to Windows 10 once the procedures are completed.

You’ll get an error number and an explanation of the issue if the component isn’t operating correctly. The device has been deactivated and must be re-enabled to fix “error code 22,” for example.

You may also try downloading the drivers from the hardware manufacturer’s website if it doesn’t work. Make sure you’re looking at “Display adapters” (in this case, “NVIDIA GeForce 9800 GTX/9800 GTX+”) and the graphics card’s name.

This is the standard procedure to remove the green lines on the monitor, regardless of whether your motherboard is set to UEFI or a classic BIOS configuration:

It’s good to have a backup copy of all of your computer’s crucial data before you begin. Even if a BIOS update fails, the data on your hard drive is not at risk.

Making a copy of your BIOS is an excellent idea, too. Don’t miss this step if you have to perform it manually, even if it’s done automatically during an update.

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

The second case is a well-known one. It will not install updates if you shut off your computer during Active Hours. For this reason, it is necessary to either modify Active Hours or manually install the application.

Monitoring a computer’s refresh rate can help identify and correct problems with graphics performance. The monitor’s refresh rate refers to how often the screen updates its image. A slow refresh rate can cause visual artifacts, such as green lines, on the screen.

Collectively, these lines indicate that the monitor is not keeping up with the latest graphics rendering instructions. This can lead to an overall degraded experience when using the computer.

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

Knowing your screen resolution, even if you aren’t an engineer or a photographer. You can appreciate your multimedia activities better if you know what you have and what you can do. In Windows 10, you may verify your screen’s native resolution by following these steps:

The resolution may be changed by selecting a different option from the drop-down menu. You should only view content that is compatible with your computer’s capabilities.

If you purchase a new external monitor or video card, you may have to change your resolution. If you’re having problems with your monitor, the first thing you should do is check the resolution. It’s a straightforward solution to a variety of visual issues.

When you start Windows regularly, programs and services in the background may cause these conflicts. If you’re having trouble accessing Task Manager, we’ve got the answer.

The monitor cabinet should never be opened to service this item. Everything that hasn’t been stated explicitly in the user handbook should be avoided at all costs.

Do not connect the monitor to anything other than the designated power supply and HDMI cable, which should be clearly stated on the monitor label or backplate.

Ensure that the monitor is close to a working power supply. The monitor’s power cord may be yanked out of the socket with a rugged grip. Attempting to disconnect the display issue by pulling its cord will not work.

Be sure to switch off your display when not in use. A screen saver program and turning off the display when it’s not in use will significantly prolong the monitor’s life.

The cabinet’s design includes ventilation holes. These openings should not be obstructed in any way. You should never shove anything into a cabinet slot or any other aperture!

The green line of death seems to be caused by a hardware problem based on the current symptoms. If you go back in time, you may discover similar problems on non-Apple devices. This problem only appeared on OLED-display phones, to be more exact.

There may be more to the problem with water damage than just a replacement screen, but it’s typically just a matter of getting a new LCD or OLED display.

Language settings are not lost when a monitor is reset to factory settings. Your specific settings, such as contrast, brightness, and picture ratio, will need to be re-entered after a factory reset.

Due to obsolete GPU drivers, the green lines on a Windows 10 laptop are standard. Using specialist driver update tools, you may repair this problem. One of the most prevalent reasons for this issue is a malfunctioning laptop display.

Your phone’s LCD might be damaged if you don’t mend a cracked screen right away. Damage to the LCD screen might occur if dust penetrates the screen cracks. Your phone’s LCD screen might be damaged if you drop it in water or other liquid.

A faulty video connection is most likely to blame for a monitor with no signal. Connect your display and PC using a different VGA cable or ribbon cable to check whether the problem remains. If not, then your video cable is to blame for this problem. Try attaching your display to another computer to see if it helps.

That’s all about the green lines on the monitor from us. An external display with bothersome vertical lines or horizontal lines may be fixed by testing the image to determine what causes these lines on the computer monitor.

It doesn’t matter whether the computer, cable box, or any other input source is to blame; the monitor, its LCD screen, or internal hardware is to blame.

Watching your mobile screen with those white or black vertical/horizontal lines is annoying. In short, it’s tough to use a phone with these lines appearing on the screen. Typically, this issue is associated with the LCD, caused by a faulty hardware component in your device due to some accidental fall or water damage. Phones with such damages can only be fixed at a phone repair center.

If you are itel, TECNO or Infinix phone user and is troubled with vertical and horizontal line issues, make a reservation now without waiting time at the service shop. Carlcare Service will fix your phones easily. If your phone is under warranty, Carlcare can also save you repair costs. Check warranty now>>

However, sometimes the culprit could be an app or software glitch, hindering the functionality of key components like display assembly or motherboard. In that case, you can tackle the situation at home.

Before you head on to the fixes, let’s make your phone data safe. Sometimes, these lines are irreversible, and even the solutions you’re up to try may be followed by some sort of data loss. Therefore, the first thing you should do is make a backup of important files and apps on your device. Some popular ways for data back in Android devices are via:

In case you’re not sure about the process, it’s better to take help from a professional repair center. For Infinix, Itel, and TECNO users, Carlcare Service - being their official service center for these brands- is a recommended place to go.

If there’re white lines on the screen, this solution may prove effective. A battery cycle is when you charge a mobile to 100% and let it drain to 0% again. Usually, the lines will disappear soon as you charge the battery fully.

If the above methods don’t work, it’s time to try this masterstroke. Using your phone in a safe mode will confirm if the lines are because of some faulty app or software.

Check if the lines are gone! If yes (hopefully), then a third-party app is the culprit. Now uninstall the latest downloaded applications until the issue is gone. OR you should try the Solution:4

Suppose the lines are still visible. Then the issue is most likely due to some hardware failure- and the best option for you is to take your device to a reliable repair center.

It won’t be aggregation if you call “Factory Reset” the mother of all solutions. It fixes most of the issues caused by an app or software glitch. The process actually brings your phone back to the factory setting by erasing all the apps and files you’ve downloaded post your phone purchase.

If the horizontal or vertical lines still appear on your phone screen after trying all the above methods, you better take your device to a reliable mobile repair store near you. Most likely, it’s a faulty hardware component that needs to be repaired or replaced. Here, we would suggest you opt for only an authorized service center, as this will ensure flawless repair at a reasonable cost. Besides, if any of the components have to be replaced, they will be genuine and as per your specific requirements.

If this issue arises in your Infinix, Itel, or TECNO phone, Carlcare Service is here to help you! Pay a visit to your nearby Carlcare center. Our highly skilled technicians will fix the issues and saves you much trouble.

As the official service center part, we provide 100% original spare parts and various value-added services for Infinix, Itel, and TECNO users. Now with the online reservation service through Carlcare App, you don’t need to wait while your phone is repaired at our service centers.

Power down the computer and unplug all peripherals. If you are using a laptop, take its battery out by flipping it upside down and sliding the battery release latch. Press and hold the power button for 15 or 20 seconds to clear all residual power from the system. Some of the computer’s power might have been transmitting to the monitor, causing it to short out. Reconnect everything and turn the system back on to see if the lines are gone.

Unplug the monitor from the back of the computer and wait a few seconds until it displays a message “No signal.” If the no signal message also has vertical lines, you know the problem is in the monitor and not in your computer. Press the “Menu” button on the screen and then use the other buttons to browse for a “Factory Settings” mode. Select this mode to reset the monitor to its original settings. If the lines persist, the monitor may have been dropped or exposed to a magnet -- which can’t be fixed.

Reconnect and turn the computer back on. Look for the lines at boot up: if you see lines before Windows loads, the problem is either with the video card, the video connection cable -- whether HDMI or VGA -- or the monitor itself. If the lines only appear in Windows, the problem is a Windows setting -- most likely the refresh rate. Right-click on the Desktop once Windows loads and choose “Screen Resolution.” Click “Advanced Settings,” “Monitor,” and then lower the refresh rate to see if the lines disappear.

Display panel manufacturers TCL and Innolux have said they are expecting supply of liquid crystal display (LCD) panels to be tight throughout the year.

TCL chairman Li Dongsheng said at a media briefing last week that the shortage in panels will continue in the first half of 2021. The situation for the second half of the year remains to be seen but panel supply in 2021 will overall be tight, the chairman said.

Innolux president James Yang made similar comments to Li, saying the shortage in LCD panels caused by strong demand for LCD since the spread of COVID-19 is expected to continue through 2021.

Yang said shortage in LCD components such as power semiconductors, driver ICs and glass substrates have caused companies to manufacture less LCD panels than there actual production capacity. The shortage in IC (integrated circuits, ie semiconductors) was the most serious and may continue up to the first half of 2022, the president said.

Display panel makers in Greater China are also transitioning their Gen 8.5 TV lines for those of IT panels. These company want to manufacture LCD TV panels at their Gen 10.5 lines that will increase productivity for them.

Market research firm Omdia believes many panel makers have targeted panel prices to the levels in the first half of 2017, when prices peaked. This will be especially true for 55-inch panels, the firm said.

Due to the shortage in driver ICs, panel makers are preferring to manufacture the more profitable IT panels over TV panels. For TV panels, they are preferring to produce larger ones.

There also may be changes in the LCD panel supply chain as TV manufacturers won’t continue buying LCD panels as much as they did when the panel price increase is hurting their profitability.

Meanwhile, the tight LCD TV panel supply in the second half of 2020 was caused by companies lowering their production volume and demand being higher than expected.

Panel prices have increased from June to December last year. For 32-inch, the price increased by 94%. Prices of 43-inch panels increased 65%, 50-inch 64%, 55-inch 59% and 65-inch 25%, according to Omdia.

Glass substrate makers NEG and AGC Fine Techno Korea suffered shutdowns of their factories in December and January, respectively, which further intensified the shortage in panels. These companies are yet to normalize production and supply to customers.

Once you have found the correct part number, see HP Consumer Notebook PCs - Ordering HP certified replacement parts. Use the instructions in this document to order a replacement part.

HP recommends that you only order parts from an authorized HP repair parts dealer. Parts ordered from third-party companies might not perform as expected and might cause additional

We develop, design, manufacture, and sell displays where it is necessary for the interface that deliver a lot of information at an instant and deliver it to the global market. We create interactive spaces that go beyond the expected, elevate everyday lives, and move people"s hearts. From bases in major cities in Asia, Europe, and North America, we build strong customer relationships by developing products that respond to market needs.

In both LCD and OLED displays, producing these cells – which are highly complex – is by far the most difficult element of the production process. Indeed, the complexity of these cells, combined with the levels of investment needed to achieve expertise in their production, explains why there are less than 30 companies in the whole world that can produce them. China, for instance, has invested more than 300 billion yuan (approximately $45 billion USD) in just one of these companies – BOE – over the past 14 years.

Panox Display has been involved in the display industry for many years and has built strong and long-term partner relationships with many of the biggest OLED and LCD panel manufacturers. As a result, we are able to offer our clients guaranteed access to display products from the biggest manufacturers.

LG Display was, until 2021, the No. 1 display panel manufacturer in the world. Owned by LG Group and headquartered in Seoul, South Korea, it has R&D, production, and trade institutions in China, Japan, South Korea, the United States, and Europe.

Founded in 2001, AUO – or AU Optronics – is the world’s leading TFT-LCD panel manufacturer (with a 16% market share) that designs, develops, and manufactures the world’s top three liquid crystal displays. With panels ranging from as small as 1.5 inches to 46 inches, it boasts one of the world"s few large-, medium -and small-sized product lines.

AUO offers advanced display integration solutions with innovative technologies, including 4K2K ultra-high resolution, 3D, ultra-thin, narrow bezel, transparent display, LTPS, OLED, and touch solutions. AOU has the most complete generation production line, ranging from 3.5G to 8.5G, offering panel products for a variety of LCD applications in a range of sizes, from as small as 1.2 inches to 71 inches.

Now Sharp is still top 10 TV brands all over the world. Just like BOE, Sharp produce LCDs in all kinds of size. Including small LCD (3.5 inch~9.1 inch), medium LCD (10.1 ~27 inch), large LCD (31.5~110 inch). Sharp LCD has been used on Iphone series for a long time.

Beside those current LCDs, the industrial LCD of Sharp is also excellent and widely used in public facilities, factories, and vehicles. The Sharp industrial LCD, just means solid, high brightness, super long working time, highest stability.

Truly Semiconductors is a wholly owned subsidiary of the Hong Kong-listed company Truly International Holdings. Founded in 1991, and headquartered in Hong Kong, the company’s production base is located in the beautiful coastal city of Shanwei City in Guangdong Province, China.

Since its establishment, Truly Semiconductors has focused on researching, developing, and manufacturing liquid crystal flat panel displays. Now, after twenty years of development, it is the biggest small- and medium-sized flat panel display manufacturer in China.

Truly’s factory in Shanwei City is enormous, covering an area of 1 million square meters, with a net housing area of more than 100,000 square meters. It includes five LCD production lines, one OLED production line, three touch screen production lines, and several COG, LCM, MDS, CCM, TAB, and SMT production lines.

Its world-class production lines produce LCD displays, liquid crystal display modules (LCMs), OLED displays, resistive and capacitive touch screens (touch panels), micro camera modules (CCMs), and GPS receiving modules, with such products widely used in the smartphone, automobile, and medical industries. The LCD products it offers include TFT, TN, Color TN with Black Mark (TN type LCD display for onboard machines), STN, FSTN, 65K color, and 262K color or above CSTN, COG, COF, and TAB modules.

In its early days, Innolux attached great importance to researching and developing new products. Mobile phones, portable and mounted DVD players, digital cameras, games consoles, PDA LCDs, and other star products were put into mass production and quickly captured the market, winning the company considerable market share.

Looking forward to the future, the group of photoelectric will continue to deep LCD display field, is committed to the development of plane display core technology, make good use of global operations mechanism and depth of division of labor, promise customers high-quality products and services, become the world"s top display system suppliers, in 2006 in the global mobile phone color display market leader, become "Foxconn technology" future sustained rapid growth of the engine.

Founded in June 1998, Hannstar specializes in producing thin-film transistor liquid crystal display panels, mainly for use in monitors, notebook displays and televisions. It was the first company in Taiwan to adopt the world’s top ultra-wide perspective technology (AS-IPS).

The company has three LCD factories and one LCM factory. It has acquired state-of-the-art TFT-LCD manufacturing technology, which enables it to achieve the highest efficiency in the mass production of thin-film transistor liquid crystal display production technology. Its customers include many of the biggest and most well-known electronics companies and computer manufacturers in Taiwan and overseas.

In 2002, it signed an IPS patent authorization contract with Hitachi of Japan and started to plan a 5th-generation plant to make the product line more complete and meet the needs of different customers.

TCL CSOT – short for TCL China Star Optoelectronics Technology (TCL CSOT) – was founded in 2009 and is an innovative technology enterprise that focuses on the production of semiconductor displays. As one of the global leaders in semiconductor display market, it has bases in Shenzhen, Wuhan, Huizhou, Suzhou, Guangzhou, and India, with nine panel production lines and five large modules bases.

TCL CSOT actively produces Mini LED, Micro LED, flexible OLED, printing OLED, and other new display technologies. Its product range is vast – including large, medium, and small panels and touch modules, electronic whiteboards, splicing walls, automotive displays, gaming monitors, and other high-end display application fields – which has enabled it to become a leading player in the global panel industry.

In the first quarter of 2022, TCL CSOT’s TV panels ranked second in the market, 55 inches, 65 " and 75 inches second, 8K, 120Hz first, the first, interactive whiteboard and digital sign plate; LTPS flat panel, the second, LTPS and flexible OLED fourth.

EDO (also known as EverDisplay Optonics) was founded in October 2012 and focuses on the production of small- and medium-sized high-resolution AMOLED semiconductor display panels.

The company opened its first production line – a 4.5-generation low-temperature polysilicon (LTPS) AMOLED mass production line – in 2014, which started mass producing AMOLED displays in November 2014.

In order to ramp up production output, the company began construction of a 6th-generation AMOLED production line in December 2016, with a total investment of 27.3 billion yuan (almost $4 billion USD). The line, which has a production capacity of 30,000 glass substrates per month, produces flexible and rigid high-end AMOLED displays for use in smartphones, tablet pens, vehicle displays, and wearable devices.

Tianma Microelectronics was founded in 1983 and listed on the Shenzhen Stock Exchange in 1995. It is a high-tech enterprise specializing in the production of liquid crystal displays (LCD) and liquid crystal display modules (LCM).

After more than 30 years of development, it has grown into a large publicly listed company integrating LCD research and development, design, production, sales, and servicing. Over the years, it has expanded by investing in the construction of STN-LCD, CSTN-LCD, TFT-LCD and CF production lines and module factories across China (with locations in Shenzhen, Shanghai, Chengdu, Wuhan and Xiamen), as well R&D centers and offices in Europe, Japan, South Korea and the United States.

The company"s marketing network is all over the world, and its products are widely used in mobile phones, MP3/MP4 players, vehicle displays, instrumentation, household appliances, and other fields. In terms of technical level, product quality, product grade, and market share, it ranks at the forefront of the domestic industry and has become a leading enterprise in the field of small- and medium-sized displays.

JDI (Japan Display Inc.) was established on November 15, 2011, as a joint venture between the Industrial Innovation Corporation, Sony, Hitachi, and Toshiba. It is dedicated to the production and development of small-sized displays. It mainly produces small- and medium-sized LCD display panels for use in the automotive, medical, and industrial fields, as well as personal devices including smartphones, tablets, and wearables.

Although Sony’s TVs use display panels from TCL CSOT (VA panel), Samsung. Sony still produces the world’s best micro-OLED display panels. Sony has many micro OLED model such as 0.23 inch, 0.39 inch, 0.5 inch, 0.64 inch, 0.68 inch, 0.71 inch. Panox Display used to test and sell many of them, compare to other micro OLED manufacuturers, Sony`s micro OLEDs are with the best image quality and highest brightness (3000 nits max).

LG Display has ceased making LCD iPhone screens, and abandoned hopes of doing so in the future, according to a supply-chain report. Separately, the company has stated that it may cease making its own smartphones.

LG once rivaled Samsung as a key supplier of iPhone screens, and Apple benefited from having two companies able to meet both technical and volume requirements. Two suppliers provided redundancy in Apple’s supply-chain, as well as giving the company negotiating strength when it came to allocating orders to the two companies.

Things changed when Apple began transitioning to OLED with the iPhone X. LG was late to recognize the industry trend from LCD to OLED, and was ill-prepared for Apple’s switch. That left Samsung as the sole supplier for Apple’s flagship phones for some time.

LG did finally manage to catch up and win Apple OLED orders, but suffered technical problems even after doing so – and Samsung still retains a technical lead.

LG Display has halted production of liquid crystal display (LCD) panels for iPhones, TheElec has learned […] LG Display halted iPhone LCD production at its AP3 line at Gumi in the third quarter. The line also stopped making panels for other phones as well in the fourth quarter.

For LG Display, the LCD line for iPhones has been low in profitability. Apple also used organic light emitting diode (OLED) panels instead for its iPhone 12 series. Sales of iPhones with OLED is also expected to exceed that of those with LCD panels this year.

Apple’s LCD model, iPhone SE, which launched last year, will use LCD panels by JDI and Sharp instead. LG Display had previously attempted to supply LCD for the 2019-model iPhone SE but failed.

The factory which made the LCD screens is reportedly being repurposed to make display panels for cars. LG is the current market leader in automobile displays of nine inches or larger.

Asia has long dominated the display module TFT LCD manufacturers’ scene. After all, most major display module manufacturers can be found in countries like China, South Korea, Japan, and India.

However, the United States doesn’t fall short of its display module manufacturers. Most American module companies may not be as well-known as their Asian counterparts, but they still produce high-quality display products for both consumers and industrial clients.

In this post, we’ll list down 7 best display module TFT LCD manufacturers in the USA. We’ll see why these companies deserve recognition as top players in the American display module industry.

STONE Technologies is a leading display module TFT LCD manufacturer in the world. The company is based in Beijing, China, and has been in operations since 2010. STONE quickly grew to become one of the most trusted display module manufacturers in 14 years.

These products are all widely used in various industries such as in medicine, home security, automotive, energy field solar charging, and domestic equipment use.

Now, let’s move on to the list of the best display module manufacturers in the USA. These companies are your best picks if you need to find a display module TFT LCD manufacturer based in the United States:

Planar Systems is a digital display company headquartered in Hillsboro, Oregon. It specializes in providing digital display solutions such as LCD video walls and large format LCD displays.

The company started in 1983 as a corporate spin-off from the American oscilloscope company Tektronix. In 2015, Planar Systems became a subsidiary of the Chinese manufacturer Leyard Optoelectronics.

Planar’s manufacturing facilities are located in Finland, France, and North America. Specifically, large-format displays are manufactured and assembled in Albi, France.

Another thing that makes Planar successful is its relentless focus on its customers. The company listens to what each customer requires so that they can come up with effective display solutions to address these needs.

Microtips Technology is a global electronics manufacturer based in Orlando, Florida. The company was established in 1990 and has grown into a strong fixture in the LCD industry.

Microtips also provides value-added services to all its clients. The company’s Electronic Manufacturing Services team gives product suggestions and shares insights on how clients can successfully manage their projects.

Taiwan and Mainland China are two Asian countries where Microtips set up their manufacturing plants. The factories boast of modern equipment, high-quality raw materials, and stringent quality control measures. Microtips even earned ISO9001 and ISO14001 certifications for excellent quality management.

What makes Microtips a great display module TFT LCD manufacturer in the USA lies in its close ties with all its customers. It does so by establishing a good rapport with its clients starting from the initial product discussions. Microtips manages to keep this exceptional rapport throughout the entire client relationship by:

Displaytech is an American display module TFT LCD manufacturer headquartered in Carlsbad, California. It was founded in 1989 and is part of several companies under the Seacomp group. The company specializes in manufacturing small to medium-sized LCD modules for various devices across all possible industries.

The company also manufactures embedded TFT devices, interface boards, and LCD development boards. Also, Displaytech offers design services for embedded products, display-based PCB assemblies, and turnkey products.

Displaytech makes it easy for clients to create their own customized LCD modules. There is a feature called Design Your Custom LCD Panel found on their site. Clients simply need to input their specifications such as their desired dimensions, LCD configuration, attributes, connector type, operating and storage temperature, and other pertinent information. Clients can then submit this form to Displaytech to get feedback, suggestions, and quotes.

Clients are assured of high-quality products from Displaytech. This is because of the numerous ISO certifications that the company holds for medical devices, automotive, and quality management. Displaytech also holds RoHS and REACH certifications.

A vast product range, good customization options, and responsive customer service – all these factors make Displaytech among the leading LCD manufacturers in the USA.

Products that Phoenix Display offers include standard, semi-custom, and fully-customized LCD modules. Specifically, these products comprise Phoenix Display’s offerings:

Phoenix Display also integrates the display design to all existing peripheral components, thereby lowering manufacturing costs, improving overall system reliability, and removes unnecessary interconnects.

Clients flock to Phoenix Display because of their decades-long experience in the display manufacturing field. The company also combines its technical expertise with its competitive manufacturing capabilities to produce the best possible LCD products for its clients.

True Vision Displays is an American display module TFT LCD manufacturing company located at Cerritos, California. It specializes in LCD display solutions for special applications in modern industries. Most of their clients come from highly-demanding fields such as aerospace, defense, medical, and financial industries.

The company produces several types of TFT LCD products. Most of them are industrial-grade and comes in various resolution types such as VGA, QVGA, XGA, and SXGA. Clients may also select product enclosures for these modules.

All products feature high-bright LCD systems that come from the company’s proprietary low-power LED backlight technology. The modules and screens also come in ruggedized forms perfect for highly-demanding outdoor industrial use.

Slow but steady growth has always been True Vision Display’s business strategy. And the company continues to be known globally through its excellent quality display products, robust research and development team, top-of-the-line manufacturing facilities, and straightforward client communication.

LXD Incorporated is among the earliest LCD manufacturers in the world. The company was founded in 1968 by James Fergason under the name International Liquid Xtal Company (ILIXCO). Its first headquarters was in Kent, Ohio. At present, LXD is based in Raleigh, North Carolina.

All of their display modules can be customized to fit any kind of specifications their clients may require. Display modules also pass through a series of reliability tests before leaving the manufacturing line. As such, LXD’s products can withstand extreme outdoor environments and operates on a wide range of temperature conditions.

LXD has research centers and factories in both the United States and China. The US-based headquarters feature a massive 30,000 square feet of manufacturing and research development centers. Meanwhile, LXD’s Chinese facilities feature a large 5,000 square meters of cleanrooms for manufacturing modular and glass products.

Cystalfontz America is a leading supplier and manufacturer of HMI display solutions. The company is located in Spokane Valley, Washington. It has been in the display solutions business since 1998.

Crystalfontz takes pride in its ISO 9001 certification, meaning the company has effective quality control measures in place for all of its products. After all, providing high-quality products to all customers remains the company’s topmost priority. Hence, many clients from small hobbyists to large top-tier American companies partner with Crystalfontz for their display solution needs.

We’ve listed the top 7 display module TFT LCD manufacturers in the USA. All these companies may not be as well-known as other Asian manufacturers are, but they are equally competent and can deliver high-quality display products according to the client’s specifications. Contact any of them if you need a US-based manufacturer to service your display solutions needs.

We also briefly touched on STONE Technologies, another excellent LCD module manufacturer based in China. Consider partnering with STONE if you want top-of-the-line smart LCD products and you’re not necessarily looking for a US-based manufacturer. STONE will surely provide the right display solution for your needs anywhere you are on the globe.