edp lcd screen made in china

SEOUL, Dec 29 (Reuters) - Samsung Electronics said on Tuesday it will extend production of liquid crystal display (LCD) panels for TVs and monitors, as stay-at-home trends of the coronavirus pandemic created an uptick in demand.

Samsung Display’s decision to extend LCD production in South Korea for an unspecified period of time overrides its announcement in March that it would end all production by the end of the year to focus on more advanced technology.

Samsung had produced LCD panels in both South Korea and China, but it earlier this year sold a majority stake in its Suzhou LCD production unit to TCL Technology Group Corp’s China Star Optoelectronics Technology unit. (Reporting by Joyce Lee; editing by Jane Wardell)

eDP (embedded DisplayPort) cables are beginning to supersede LVDS as the cable assembly of choice for connecting driver boards to TFT displays. They use the same digital signal processing protocol as DisplayPort cables, but in a smaller physical connector.

Often manufactured from micro-coax cable, eDP cable assemblies require fewer connections than LVDS. They also offer all power, data and control signals through one single assembly. Where LVDS assemblies could require 18 signal wires, a comparative eDP cable would use only five.

The Global Production of Large-Size TFT LCD Panels Will Maintain a CAGR of 7% Over The Next Five Years 　　2018-2022 annual global large-size LCD pane...

HRS FX15S TO FX15S MICRO COAXIAL CABLE ASSEMBLY, View HIROSE micro coaxial cable, CenterMCX Product Details from Shenzhen CenterMCX Tech. Co., Ltd. on Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: CenterMCX Model Number: HRS FX15S Cable Application: TV/LCD Packaging & Delivery Packaging Details: Simple. Delivery Detail: 10-30days Specifications HRS FX15S TO FX15S MICRO COAXIAL CABLE ASSEMBLY,LVDS,MICRO COAXIAL CABLE(TV/NOTE BOOK/CHIMEI PANEL/AUO PANEL/SAMSUNG PANEL HRS FX15S TO FX15S MICRO COAXIAL CABLE ASSEMBLY,LVDS,MICRO COAXIAL CABLE(TV/NOTE BOOK/CHIMEI PANEL/AUO PANEL/SAMSUNG PANEL We have more machine to manufacture micro coaxial cable such as CO2 Lazer,YAG,Mulse Hibar machine,Testing machine,Auto Robot.

I bought two of these touchscreens on eBay, complete with controller boards and frames. I had one 11.6" display available to me already, and another one wouldn"t be too hard to source in the future if I decided to. But first, gotta successfully reuse one of these to make sure my idea works.

This one is certainly a USB device - most of modern laptop touchscreens are - so most of the laptop webcam reuse tips will apply. I need to find VCC, D+, D- and GND. There"s 4 pins on the connector, so I don"t have to worry about pins like EN and RST being present - they are on some touchscreens, but not this one.

The connector receptacle isn"t something that I have a plug for when looking through my collection of random wire ends. This means I have to solder to the touchscreen board, sadly.

Some touchscreens actually want 5V VCC, others need 3.3V. How do I determine that? I usually just power them from 3.3V and then, if they fail to work, do research to see if perhaps they"d need 5V. This time, I had a connection problem and decided to double-check whether the touchscreen would work from 3.3V, so let"s go through my process of researching whether a touchscreen is 3.3V or 5V.

I didn"t have 1 and 2, so I had to resort to 3. Asus X200CA doesn"t have schematics available but there"s boardview files. With OpenBoardView and the FZ key, I was able to open the boardview file and browse it. Now, where do I find the touchscreen connector?

Sometimes the touchscreen cable is a separate cable, and sometimes it"s the same cable that also carries the display signals, and I need to know this to know which connector to look for touchscreen signals on. I looked up "x200ca cable" on eBay and found this:

Looks like exactly the cable we need, one connector (right) is the kind of connector that plugs into our touchscreen controller board, and another one (left) is a Molex connector often used in laptops. So, the touchscreen has a separate connector. I could look up an "Asus X200CA teardown" video on YouTube and see exactly where that wire goes, but I saved a bit of time by googling "X200CA motherboard" and looking at images:

So, it"s decided, the touchscreen wants 3.3V, and it"s good to know that for sure - now I won"t think "oh, maybe it needs 5V after all" and end up accidentally destroying it.

The "determining voltage" part isn"t necessary if you"re not having doubts about the right voltage, that"d happen if the touchscreen fails to work at 3.3V, for instance. Otherwise, I"d say, you are pretty safe just powering it from 3.3V.

This controller board is already connected to the touchscreen glass and screwed to the touchscreen frame. I see no use in disconnecting and unscrewing it, there"s more than enough exposed pins on the part of the board accessible to us.

Now, I just connect wires from my small microUSB+3.3V breakout board to the touchscreen, and, after swapping D+ and D- wires once (at the breakout, not at the connector), it works:

Of course, it"s out-of-the-box on Linux, with Windows, your mileage may vary. Sometimes Windows wants drivers, even if it"s a popular touchscreen - usually isn"t needed with Linux, thanks to all of the in-kernel drivers.

I touch the touchscreen (from its front size) and the mouse pointer of my laptop moves! Ain"t that nice. After fastening the wires a bit, I decide that I"ve successfully reused this touchscreen. Now it just needs a display fitted to it:

Screen Replacement for MacBook Pro A2338 M1 2020 EMC3578 MYD83LL/A MYD92LL/A 13.3" 2880x1800 LCD Display Screen Complete Topfull Assembly w/Cover(Space Gray)Part Number: EMC3578

Screen Replacement for MacBook Air A1466 2017 EMC3178 MQD32LL MQD42LL Z0UU1LL 13.3" LED LCD Display Screen Complete Top Full Assembly w/CoverPart Number: 661-7475 ,661-02397

Screen Replacement for Lenovo IdeaPad Flex 5-14ARE05 5-14IIL05 5-14ITL05 5-14ALC05 81X20003US 81X20005US 81X20007US 5D10S39642 5D10S39641 14" 1920x1080 LED LCD Display Touch Screen w/BezelPart Number: 5D10S39642 5D10S39641

Screen Replacement for MacBook Pro A1706 A1708 Late 2016 Mid 2017 661-07970 661-05323 13.3" LED LCD Display Screen Complete Top Full Assembly w/Cover (Space Gray)Part Number: 661-07970 661-05323

Screen Replacement for HP Envy X360 15M-DS 15M-DS0011DX 15M-DS0012D 15M-DS0023DX L53868-001 15.6" FHD LCD Display Touch Screen Digitizer Assembly w/ Touch Control Board + BezelPart Number: L53868-001

Screen Replacement for MacBook Air A2337 M1 2020 EMC3598 13.3" 2560x1600 LCD Display Screen Complete Topfull Assembly w/Cover(Rose Gold)Part Number: EMC3598

Screen Replacement for MacBook Pro A1708 Late 2016 Mid 2017 EMC2978 EMC3164 13.3" LED LCD Display Screen Complete Top Full Assembly w/Cover(Space Gray)Part Number: 661-07970 661-05323 661-05095 661-05096

Screen Replacement for MacBook Air A1466 2013 2014 2015 2017 661-02397 13.3" LED LCD Display Screen Complete Top Full Assembly w/CoverPart Number: 661-02397

Screen Replacement for Lenovo Ideapad 3 15IML05 81WR 81WR0007US 81WR000BUS 81WR000FUS 81WR000GUS 81WR000AUS 15.6” 1366x768 LED LCD Display Touch ScreenCompatible Manufacturer: HP

Screen Replacement for MacBook Air A2337 M1 2020 EMC3598 13.3" 2560x1600 LCD Display Screen Complete Topfull Assembly w/Cover(Silver)Part Number: EMC3598

Screen Replacement for HP Pavilion 15-EG 15-EG0050WM 15-EG0070WM 15-EG0069NR 15-EG0072NR 15-EG0079NR 15-EG0056NR 15-EG0074NR M16342-001 LED LCD Display Touch Screen 15.6" 1920x1080Part Number: M16342-001

Screen Replacement for HP ENVY X360 15M-EE 15-EE 15M-EE0013DX 15M-EE0023DX 15-EE1010NR L93181-001 15.6” 1920x1080 LED LCD Display Touch Screen w/Black BezelPart Number: L93181-001

Screen Replacement for HP Envy X360 15M-BP 15-BP 15M-BP011DX 15M-BP111DX 15M-BP112DX 15M-BP012DX 15.6" FHD LED LCD Display Touch Screen Digitizer Assembly w/ Touch Control Board + BezelPart Number: 925736-001

Screen Replacement for Lenovo IdeaPad Flex 5-14ARE05 5-14IIL05 5-14ITL05 5-14ALC05 81X1 81X2 81WS 82HS 82HU 5D10S39642 5D10S39641 14" 1920x1080 LED LCD Display Touch Screen w/BezelPart Number: 5D10S39642 5D10S39641

Screen Replacement for HP Spectre X360 15-CH 15T-CH 15-CH011DX 15-CH011NR 15-CH012NR 15-CH075NR L15596-001 15.6" UHD LED LCD Display Touch Screen Digitizer Assembly w/ Touch Control BoardPart Number: L15596-001

Screen Replacement for HP PAVILION X360 15-CR 15T-CR 15-CR0088CL 15-CR0091MS 15.6" FHD LED LCD Display Touch Screen Assembly w/ Digitizer Control Board + BezelPart Number: L20824-001 L20825-001 L20822-001 L20823-001

Over the years, with the wider and wider application of LCD screens, more and more brand products have been favored by the people. Together, more and more LCD manufacturers have emerged. Of course, the most popular brands in China are BOE, INNOLUX, CHIMEI, AUO, CSOT, etc. So, Which is the best brand of

It is better to say who is more professional than good or bad. In fact, the above mentioned LCD screen manufacturers are very professional, and the quality is guaranteed. But the most popular must be BOE and INNOLUX, these two panel manufacturers are also obvious to all. They all have multiple distributors, but not every distributor has the best size and price.

SZ XIANHENG TECHNOLOGY CO., LTD. is the agent of AUO, BOE, INNOLUX, SHARP, IVO and Mitsubishi, and other domestic and foreign well-known brands of small and medium-sized LCD display; specializing in customized production of touch screen display, LCD and industrial touch display and other high-tech products. According to the needs of customers, we can provide various LCD products: high-brightness LCD screen, LCD driver board, touch screen, booster board, all kinds of LCD special wires, etc. to produce industrial displays.

What brand of LCD screen is good? If you choose BOE, INNOLUX, CHIMEI, AUO or CSOT, you can buy them from us. 18.5 inch LCD screen, 21.5 inch LCD screen and other small and medium size, our price is the lowest in the industry.

A while back I was sitting around and wondering what to do with my dead laptop. I knew the mother board was fried but everything else was still in working condition. As a result, I decided to make an external monitor from my dead laptop and proceeded to do the research to find out if this was possible. Below is what I discovered. Unfortunately, there was no way to use the motherboard"s VGA connector. The VGA connector on a laptop is used to connect to an external monitor. In any case the VGA connector is output only and wouldn"t work for an external screen. As a result, I found that I needed to buy a controller board for the LCD screen, to make it work as an external monitor. This was the main cost but was still less than half the cost of buying an external monitor.

Step Two. To Remove the LCD screen from the laptop, you will need to remove the screws. There are rubber pads on the front of the LCD screen to protect it when the laptop lid is closed. Behind the rubber pads are the screws. Find and remove all the screws holding the front plastic frame on the laptop lid. Keep track of the pads and screws as you will need them to reassemble everything.

Step Three. Remove the plastic frame from the LCD screen. Here is where you need to be careful. The screws are not the only thing holding the plastic frame on the LCD screen! The plastic frame is snapped into place. Carefully pry loose the frame from the LCD screen. Pry it loose gently. Try to keep it as close as possible to the LCD panel while you are prying it loose because you may also find that you need to slide it to the left or right to completely remove it from the laptop. There is a small protrusion of the plastic frame where the hinge is. Because of this protrusion you need to slide the frame, in this case, to the right, to detach it from the laptop.

Step Four. Locate and remove the screws holding the LCD panel to the laptop. These are located on the bottom. The screws are attached to a small metal hinge. this is the component that is attached to the keyboard frame.

Next you will need to remove the LCD screen. Note that there is a cable attached. This is the LVDS cable. It is best to take apart the rest of the laptop and unplug it from the keyboard. However, the cable can be cut at the bottom. Take care not to cut the two wires going into the inverter (that"s the slim circuit board at the bottom.

Once the LCD panel is removed, you can remove the LVDS cable and unplug the inverter at the bottom. Unplug the inverter from both ends. Do not cut it. The LVDS cable is taped to the back of the LCD screen at the top. It is the flat cable running up the back. Remove the tape and slid the cable down. Since you need to buy an LCD controller board, you will no longer need the LVDS cable the laptop came with or the inverter. At this point you should just have an LCD screen with a pair of wires coming out of it.

Keep track of the plastic front frame and the plastic backing. You will need them to resemble the LCD screen. On the other hand, you have different fingers, just kidding. On the other hand, you can buy a picture frame and put the LCD screen in the picture frame.

Here is a picture of the LVDS cable and the inverter detached from the LCD screen. Since we will be buying an LCD control board these cables will not be needed again.

Next, once you have removed the LCD panel. Flip it over and look for a model number on the back. You will need this model number to order the correct LCD controller board. I went to E-Bay and found one for $42.00. I bought the LCD controller board and then received an email from the seller requesting the model number of the LCD screen and manufacturer. This is because each controller board is flashed, (programed to run a specific LCD) I gave him my model number, LP171WX2 A4K1 and told him it was made by LG Phillips. Since the board was coming from China, I received my order about 2 weeks later. Due note to buy one with a power cord! The LCD controller board has the VGA input connection which allows you to connect it to another computer and use it as a second monitor or as a back up in the event the one on your working computer goes out.

The LCD controller board is real easy to connect. It comes with all the required cables, except a VGA cable which you will need, in order to connect your LCD to another computer. You can buy a VGA cable from Best Buy or a computer parts store.

The LCD control Bard comes with all the cables except the VGA cable which you will have to buy. Once you have received your kit, proceed to connect it to the LCD screen. Plug the LVDS cable into the LCD panel where you removed the original from. The two wires at the bottom of the LCD screen that were connected to the inverter need to be unplugged from the old inverter and plugged into the new inverter below. Then, plug the power in. Make sure that the LCD control board is not sitting on anything conductive, like metal or it will short and fry. Next connect the VGA cable to the LCD control board and plug the other end of the VGA cable to another computer. Make sure the computer is on before you plug in the VGA cable. At this point you should have the same image that is on the computer you plugged the VGA cable into, on the LCD panel.

Next, I attached a 4 inch section of two by four on the outside back of the laptop lid. I needed this in order to attach my stand to the LCD screen. I used 5 screws and screwed them in place from the inside. I did splice and extend the cables going from the LCD controller to the inverter it came with just to have a little more room.

Originally, I built a nice wooden stand for my LCD panel but was not satisfied with it. So, I took a broken florescent desk lamp and dremeled off the section holding the florescent tubes, leaving enough metal to screw on to the two by four on the laptop lid. Before attaching the stand, I drilled four holes in the metal to make it easier to screw it on the two by four.

Next you will need to attach the LCD controller to the laptop lid. To do this, screw in a few sections of wood from the inside of the lid. Then on the outside of the lid attach the LCD control board. Place the wood in an area where the control board can reach.

Next you will need to find all those screws you have been saving and reassemble the LCD screen. I also added some surgical tubing to the top springs for added strength.

By the way a store bought swing arm half the size of this one, I found, cost around $400.00. If you choose to use a swing arm like this one, go with the one that has a magnifier on it and dremel off the magnifier leaving enough metal to attach to your LCD lid. You need one of this caliber to hold the LCD screen. Swing arms with the light attached are not strong enough.

Since I was asked about the web cam, I though Should add it to the instructable. There is a nice instructable here at this site showing how to convert a web cam from an LCD screen: http://rntmns.com/2011/02/rebirth-of-a-webcam/

Actually, you can do One better. You can salvage the RAM, the Wireless card, the Batteries, the charger, the hard drive, the DVD disk player and sell them to people that need them on E-bay and Still keep the LCD screen for yourself.

Genius! As an honorary "Red neck" (U.K. chapter, it"s a good thing, honest) I"m putting your application in the post. You have given me the three screens I need for my simpit plus a lot of peripherals that I hadn"t even considered. Thanks.0

Thanks for this instructable. I recently came upon some discarded laptops with either had bad screens or nonfunctioning everything else. I may be able to mix and match to get a usable machine out of the pile of junk!0

I checked ebay for the LCD control Board and all I did was punch in " LCD control Board for a LP154W01(A3)" , That"s my model number. You, of course, use your"s. ebay came up with the correct one for $25.00 and it has all the imputs you could want. This is good today, 2/11/19. Have fun folks!

i have a similar lcd panel to yours. infact 3 of them! they"re so easy to work with and doesn"t need a backlight controller LP154WH4 TLA1 except the lvds cable sold separately. I"ve build one and runs on

Nicely done and very informative!! However unfortunately, by the time you add the cost of the LCD Controller card, various parts and time you could have bought a new inexpensive monitor.

it really depends on what kind of display your laptop came with. I recently had a laptop that featured a 4k OLED screen and If I add the price up of the controller kit and materials (depending how you are going to make the stand) it would actually in my case be cheaper to make that an external monitor because, quite frankly 4k is pretty expensive and I don"t want to degrade to a lower resolution. in said laptop the motherboard died so I just scavenged everything including the LCD which I have just lying on my desk. so I might even consider trying this.0