1.54 tft lcd touchscreen 240 pixels brands

•1.54 Inch 240x240 IPS TFT LCD Display with capacitive touch panel, is the best small LCD display with IPS full viewing angle.This LCD Module is with SPI and I2C Interface.

•1.54 Inch 240x240 IPS TFT LCD Display is widely used for wearable devices, handheld devices, medical equipments, mobile phone, mp3 player and other electronics products.

We"ve been looking for a screen like this for a long time - it only has a 1.5" diagonal but has a high density of 220 ppi, 240x240 pixels with a wide angle display. It looks a lot like our 1.44" 128x128 screen, but it has 4x more pixels and it looks great from any angle. We have seen displays of this calibre used in smart watches and small electronic devices, but they have always been a MIPI interface. Finally, we found one that is SPI compatible and has a user-friendly display driver, so it works with all microcontrollers or microcomputers!

This pretty little display card is the best way to add a small colorful and very bright screen to any project. As the display uses 4 SPI wires to communicate and has its own addressable frame buffer per pixel, it can be used with any type of microcontroller. Even a very small one with little memory and few pins available! The 1.54" screen has 240x240 16-bit color pixels and is an IPS screen, so the color is very beautiful up to 80 degrees relative to the axis in any direction. The TFT driver (ST7789) is very similar to the popular ST7735, and our Arduino library supports it well.

Our breakout has a soldered TFT display (it uses a delicate flexible circuit connector) as well as a 3.3V regulator with very low voltage drop and a 3/5V level adapter so you can use it with 3.3V or 5V power and logic. We also had some space, so we placed a microSD card holder so you could easily load color bitmaps from a microSD card formatted FAT16/FAT32. The microSD card is not included.

Of course, we won"t just leave you a technical sheet and a "good luck"! We have a complete open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as a sample code and wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

Orient Display sunlight readable TFT displays can be categorized into high brightness TFT displays, high contrast IPS displays, transflective TFT displays, Blanview TFT displays etc.

The brightness of our standard high brightness TFT displays can be from 700 to 1000 nits. With proper adding brightness enhancement film (BEF) and double brightness enhancement film (DBEF) and adjustment of the LED chips, Orient Display high brightness TFT products can achieve 1,500 to 2,000 nits or even higher luminance. Orient Display have special thermal management design to reduce the heat release and largely extend LED life time and reduce energy consumption.

Our high contrast and wide viewing angle IPS displays can achieve contrast ratio higher than 1000:1 which can make readability under strong sunlight with lower backlight luminance. High brightness IPS displays have been widely accepted by our customers with its superb display quality and it has become one of the best sellers in all our display category.Transflective display is an old monochrome display technology but it has been utilized in our color TFT line for sunlight readable application. Orient Display has 2.4” and 3.5” to choose from.

Blanview TFT displays are the new technology developed by Ortustech in Japan. It can provide around 40% of energy consumption for TFT panels which can use smaller rechargeable or disposable batteries and generate less heat. The price is also lower than traditional transflective TFT displays. Orient Display is partnering with the technology inventor to provide 4.3” and 5.0”.

High Level Interfaces: Orient Display has technologies to make more advanced interfaces which are more convenient to non-display engineers, such as RS232, RS485, USB, VGA, HDMI etc. more information can be found in our serious products. TFT modules, Arduino TFT display, Raspberry Pi TFT display, Control Board.

Adafruit has been looking for a display like this for a long time - it"s only 1.5" diagonal but has a high density 220 ppi, 240x240 pixel display with full-angle viewing. It looks a lot like their 1.44" 128x128 display, but has 4x as many pixels and looks great at any angle. Displays of this caliber are used in smartwatches and small electronic devices but they"ve always been MIPI interface. Finally, Adafruit has found one that is SPI and has a friendly display driver, so it works with any and all microcontrollers or microcomputers!

This lovely little display breakout is the best way to add a small, colorful and very bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.54" display has 240x240 16-bit full color pixels and is an IPS display, so the color looks great up to 80 degrees off axis in any direction. The TFT driver (ST7789) is very similar to the popular ST7735, and our Arduino library supports it well.

This breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. They also had a little space so they placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.

Of course, Adafruit wouldn"t just leave you with a datasheet and a "good luck!" - they"ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

Table of Contents Company and Production Products and Services Company Statement Milestones Company Overview Market Share Manufacturing Lines Quality Verification Processes Key Product Lines Product and Service We Offer Industries We Serve Product Features Feature Products: - Round LCD modules - Square LCD modules - Stretched Bar LCD modules - Industrial Quality modules - High Brightness modules - Touch Screen LCD modules Service: Custom and Standard Standard Product Lists Project Share/ Application

Set up automatic production lines: Backlight, COG, FOG, LCM and Touch Screen Established a Hong Kong company for overseas markets LCD technology became mainstream of display market in China, we entered the business. ISO9001/ISO14001 quality system certificated; Entered the industries of beauty equipment and vehicle instrument. Production lines expansion to increase the capacity and meet the business growth

Unique Shape Features High Brightness: 2000 cd/m2 Product Features High Resolution: 1920x1080 pixels Touch Screen LCD with Resistive Touch Screen LCD with Capacitive Touch Screen

Stretched Bar LCD Modules Size: 6.86”/ 7.84” Aspect ratio ≈ 1:3 Stretched outline displays more information Application: home appliances, car nevigation panels Resolution (pixel) Resolution (pixel) Display Type IPS/Full View Display Type IPS/Full View

Project Share MEDICAL INDUSTRIAL FACILITY 4.3 inch TN TFT + capacitive touch screen + enhanced cover glass surface treament and thickness 9 inch IPS TFT + resistive touch screen + high brightness + enhance the lifecycle 5.0 inch IPS TFT + capacitive touch screen + high brightness + wide temperature + anti-vibration SMART LIFE 2.1 inch IPS TFT + capacitive touch screen + custom cover glass with allin-black finish