can you clean lcd screen with alcohol factory

We"ve all had that moment: You"re sitting at your computer or laptop and the light hits your screen in a way to reveal an unsightly accumulation of streaks, fingerprints, and dust.

To help, we round up the most important things to know about cleaning your computer screen, whether it"s a Mac or PC. While it"s a simple process, there are a few important rules to keep in mind to make sure you"re doing it safely.

Computer screens are not all made the same, and thus can"t all be cleaned the same way. You"ll want to be careful no matter your screen type, but it"s helpful to know that displays come in two categories:Glass-coated screens: The screens on newer iMac displays and MacBooks have a glass overlay. Glass displays are a little less delicate than LCD or LED screens, and mild cleaning solutions, like rubbing alcohol, are generally safe to use on them.

LCD or LED screens:Windows computers and most touchscreens and matte displays are typically not coated in glass. Extra care should be taken with these screens so not to damage the pixels that make up the display.

Since there are so many computers, laptops, and monitors out there, each with their own set of variables and specificities, it"s smart to just simply err on the side of caution.

To clean a computer screen, you really just need two things: A microfiber cloth and filtered or distilled water. That"s to say you don"t need a special store-bought cleaning solution.

If you"d like some extra sanitation power, an equal parts mixture of water and vinegar is safe no matter your screen type. If you know that your display is glass-coated, you can also use an equal parts mixture of water and 70% rubbing alcohol.What you needTwo lint-free microfiber cloths

d3sign/Getty ImagesTurn the computer or laptop off.For safety reasons, begin by letting the device cool down completely. Dust, fingerprints, and smudges are also easier to spot on a black screen.

Wipe off dust with a dry cloth. Use a dry, lint-free microfiber cloth to gently wipe away any visible dust and dirt. If necessary, apply gentle pressure to remove surface-level smudges.

If any marks remain, wipe with a lightly moistened cloth.For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.

Buff with a dry cloth and air-dry.If any streaks remain once the screen dries, gently buff them with the dry cloth. Before you turn your computer or laptop back on, allow the screen to dry completely.Note:Apple claims that you can use 70% isopropyl disinfecting wipes to clean any Apple product. Just remember not to get any liquid into the device"s ports or openings — to avoid this, you might want to wring out the wipe to remove any excess liquid before using it.

For the best advice for cleaning your screen, it"s a smart idea to check your owner"s manual, which provides the manufacturer"s specific recommendations. But since screens are especially susceptible to damage, there are a few general guidelines that apply, no matter the type of screen you own.

Turn off your computer before cleaning the screen. This is just safe practice where any amount of liquid is involved, but more specifically, any static on the screen could create a shock and damage the internal components.

Do not use abrasive cleaning solutions. This includes bleach (or any products containing bleach), hydrogen peroxide, or all-purpose spray cleaners. Using an abrasive cleaner can ruin the finish of your screen.

Use filtered or distilled water. Especially in areas with hard water, water containing minerals like calcium and magnesium can damage your screen or leave even more streaks.

Use only soft microfiber cloths.Even a fabric as soft as a cotton shirt has snags and uneven particles that can scratch a computer screen. For this reason, avoid T-shirts, towels, and paper towels. The exception is the Apple Pro Display XDR or iMac, which requires a special polishing cloth.

Never spray cleaning solution directly onto the screen. To avoid any risk of damage from excess moisture, mist the solution directly onto the microfiber cloth instead.

Do not wipe in circles. Wiping in circles can create uneven pressure and ultimately lead to screen damage. It"s also more likely to create streaking. Wipe in tight, Z-shaped motions, or in broad strokes from side to side.

Do not scrub.Apply gentle pressure only. Hard scrubbing can damage the internal components of the screen and could leave scratches or spots of discoloration or dead pixels that won"t go away.Melanie Weir

Melanie Weir is a freelance author for Insider, mainly focusing on the Tech Reference section, but occasionally contributing to Lifestyle and Entertainment topics as well. She is also a freelance writer for ScreenRant, and is the Lead Weekend News Editor at TheThings.com. In her spare time she writes plays for both stage and screen. She can be reached at melanie.weir1008@gmail.com, or through LinkedIn.

No matter where LCD screens are kept, they will always need cleaning from time to time. Cleaning an LCD may seem like a daunting task, but there are a few simple ways to clean it without damaging to scratching to surface.

There are many cleaning solutions available in shops. However these may seem a bit expensive and are sometimes quite unnecessary. PixelClean is one of the better and less expensive brands. It is highly recommended. Most products will come with instructions on how to use them.

It is recommended to use a simple alcohol solution to clean an LCD screen. This solution is made up of part distilled water and part 50% isopropyl alcohol. Be warned that isopropyl alcohol is flammable.

50% isopropyl alcohol is very common. If you find 70%, 91%, or 99% isopropyl alcohol, adjust the formula to use less alcohol and more distilled water.

The reason you want this mixture is because alcohol evaporates so quickly. More importantly, it doesn’t leave any residue behind, so the screen will be cleaned without there being any streaks or marks left. You can buy this at your local pharmacy–it’s used for cleaning wounds.

Do NOT use tissues/Kleenex to wipe your screen. That is ineffective, because they will leave little tissue particles all over your screen. You want a 100%-cotton cloth that is soft and absorbent. A t-shirt is a good cloth, but so is a sock or a Turkish towel, so long as it is 100% cotton.

Stay away from cloth that has polyester in it because this can contain stiff filaments. These filaments can scratch the screen while you are rubbing over it. Also stay away from paper towel and tissues. While it might feel soft, remember that it is paper and therefore, it comes from wood. This means that there might be microscopic wood fragments in the paper towel that will scratch your screen if you move it over it. Therefore, avoid anything paper and instead, focus on the cotton.

First dampen the cloth with the alcohol solution. You should never spray any sort of liquid directly onto the screen. You also don’t want to try and clean the screen without some sort of liquid because the dust particle, as it is moved across the screen, will scratch.

Wipe the screen gently from top to bottom or in a counter clockwise direction, and wait for it to dry. You’ll remove all of the dust and the liquid that is on the screen will evaporate quickly. Then, the screen will be clean and scratch free.

Be careful not to let the cleaning solution leak into the sides of the monitor. Also, be certain that you do not press hard on the LCD screen. You can permanently damage an LCD screen by pressing on it too hard.

If there is just dust on your screen, there is no need to fully clean it. To remove dust all that must be done is to wipe it away with a microfiber cloth. Simply wipe your screen from end to end gently with the cloth.

It is always best to follow manufacturer’s suggestions for product care, but generally it is safe to clean an LCD screen using a very soft, 100% cotton cloth, and a mixture of distilled water and clear vinegar. If you prefer buying ready-made products, LCD cleaners are available from electronics shops in spray bottles.

While it might be tempting to use an old tee shirt for a cotton cloth, the seams can potentially scratch the screen. Flannel is the recommended material, and you can visit a fabric shop and buy a yard (0.9 meters) of 100% untreated cotton flannel for very little money. By purchasing this amount of fabric, you’ll be able to cut new cloths when the old one gets dirty. Microfiber cloth is also a good choice.

While many people use isopropyl alcohol in a 50/50 solution with distilled water, some manufacturers warn against this. If you are inclined to use isopropyl rather than vinegar, check with the manufacturer’s website of your LCD product to be sure this is acceptable. Many store-bought LCD cleaners contain isopropyl, and it is generally considered safe and effective.

Otherwise, a 50/50 solution of distilled water and white vinegar can be combined in a spray bottle. Avoid using a bottle that had previous cleaners or agents in it — a new spray bottle can be purchased at the grocery store. Choose a sprayer that is capable of a fine mist.

Cut a piece of cloth large enough to fold into a nice square pad that is a few layers thick. Spray your 50/50 solution on to the surface of the cloth, lightly dampening it. Be sure the cloth isn"t so wet that it will drip down the screen. Do not spray the solution directly on to the LCD screen.

Before you clean an LCD screen, power it off to avoid potential damage. Take your cloth and gently wipe the surface from top to bottom, moving downward in a straight line. When you reach the bottom lift the cloth away and place it at the top again to proceed. Use a very light touch, as pressing against the screen could damage its pixels.

Do not move the cloth in a circular motion to rub out fingerprints or smudges. The solution will do the trick. If you have to cover an area twice, wait until its dry, then repeat the process. The vinegar should cut through any dirt or body oils deposited on the screen. By following this simple procedure, your screen should stay clear and unblemished.

Never use paper towels, napkins, or tissues to clean an LCD screen. These materials will either scratch the screen or leave debris. Household cleaners and ammonia should also be avoided, as they can leave a white cast, ruining the screen’s finish.

If you have been wondering how to clean a monitor with isopropyl alcohol, then let me tell you that the answer is very simple. All you need is a lint-free cloth and a container filled with 99% pure isopropyl alcohol. To start, dip your cloth in the container of alcohol and wipe away grime from your screen without applying too much pressure. After cleaning, let the monitor dry completely before turning it on again.

Use a soft, lint-free cloth. Avoid paper towels or anything else that might contain fibers. If you"re concerned about your monitor"s finish, you should be especially careful when cleaning it with alcohol—so don"t use any kind of rag or cloth you"ve already used on something else. If you"re concerned about dust or other contaminants on the monitor itself, then go ahead and use a small piece of tape to pick up excess dust before cleaning the screen with isopropyl alcohol.

A damp cloth is best for cleaning the monitor"s screen. This will prevent you from scratching it with a dry cloth or paper towel, which could damage your screen and make it harder to see.

Use a lint-free cloth. You don"t want to leave behind any debris, so you want to avoid using paper towels or other cloths that have fibers that could stick to your screen.

Use only enough isopropyl alcohol to clean off the dust and dirt from your monitor. Overapplying the cleaning solution will cause it to evaporate too quickly and leave residue on your screen, as well as potentially damaging it if there"s too much moisture in the air.

If you"re using a circular motion with your cloth, wipe slowly and do not press down hard on any part of the surface of your display—you could cause permanent damage by scratching or marring it with too much pressure or speed! Instead, move lightly around each individual point until all traces of dust have been removed before moving onto another area (if needed).

The next step after this is drying off any excess liquid: if there is any left over after patting down with one dry portion of cloth material, use another clean section again but be careful not overdo it here so as not spill water into places where they should not go!

Let the alcohol dry completely before turning on the monitor. If you do not, it could damage your monitor and void your warranty. Allow at least five minutes for a regular monitor, and overnight for laptops—the liquid will evaporate faster in warmer weather than in colder.

If you are looking for a way to clean your monitor, then consider using isopropyl alcohol. Isopropyl alcohol is a common solvent used in the medical and pharmaceutical industries, as well as one of the most effective disinfectants around. You can find it at your local drug store or supermarket, usually labeled “rubbing alcohol” or “isopropyl rubbing alcohol”.

Isopropyl alcohol is also very safe to use on monitors because they do not contain any oil or other contaminants that can be removed by detergents such as soap. Another benefit of this cleaner is that it will remove fingerprints without leaving any residue behind (unlike commercial cleaners).

Cleaning your monitor with isopropyl alcohol is a simple way to keep it looking good. It’s also cheap and easy to do, so there’s no reason not to try it. The alcohol will remove dust and fingerprints from both LCD and CRT monitors, leaving them looking like new again!

Disclaimer: This post may contain affiliate links, meaning we get a small commission if you make a purchase through our links, at no cost to you. For more information, please visit our Disclaimer Page.

One only requires a computer screen cleaning solution such as rubbing alcohol and a microfiber cloth to clean the screen. But the cleaner depends on the type of the screen, i.e., if LED LCD or non-LCD screen. Also, be careful not to use excessive moisture and abrasive cloth.

Even though it is a good idea to get rid of the dirt in your monitor, it is sometimes not safe. There arepotential issues with using wipes that aren’t meant for cleaning computer screens. Below are the possible instances that may cause problems to your monitor:

The wipes may contain components that leave a residue when the liquid dries up. For example, wipes used on human skin tend to have lotions, while those meant to clean household items contain some soaps, which leave streaks on the screen.

The wipes may contain too much liquid that is not sufficiently volatile. This liquid could then drip into the internal parts of the machine and cause damages. And may pose a danger to the person cleaning.

Commercial computer screen cleaning wipes are typically a piece of non-woven lint-free moistened with a highly volatile liquid such as rubbing alcohol.

Also, the sort of pre-moistened wipes meant for cleaning eyeglasses, dry-erase boards, wipe windows tend to do a similar job as the ones used for cleaning computer screens.

You can clean your screen with alcohol if it is made of plastic. However, it would be best if you watched out for the amount of moisture in the wipes. They tend to get wetter as you use them, but you can squeeze the liquid out until you remain with the proper amount of moisture. Also, watch out for the plastic that surrounds the screen.

Alcohol is a mild solvent; it is a less powerful solvent than water. But it has one advantage over water as alcohol can liquify grease and oil, which are the common causes of smears on the displays of electronic devices.

Don’t use pure alcohol to clean, though. A homemade mix of 7 parts of isopropyl alcohol and 3 parts of distilled water make the best cleaning agents of screens at home and are the cheapest and easiest to use.

Althoughalcohol might be a decent option to clean your screen, most new display screens have coatings that don’t react well with alcohol-based or ammonia-based detergents. Hence, in these instances, you should hold off using alcohol on your computer screen.

You are wondering how to clean your computer screen without causing any damages to it? Firstly, you don’t need to be a tech expert to understand that any liquid getting into the machine’s hardware means trouble. Hence, be careful not to let any liquid get behind the screen. Because of this, consider avoiding liquid sprays.

There are different types of screens, and depending on the screen,the cleaning options may vary. It is critical to clean your specific computer screen since the active components in cleaning products can cause irreversible harm in the form of scratches and streaks if done incorrectly.

If you have a computer with an LCD screen, you should avoid using disinfecting wipes as the active ingredients available in Clorox and Lysol wipes could damage the screen.

Chemicals or any solution containing acetone, ammonia, ethyl alcohol, ethyl acid, toluene, or methyl chloride can damage your computer screen. It’s best to avoid these kinds of cleaners as they may leave a glare-causing film.

Don’t bother using soap as well. Some soap varieties have ingredients that are known to affect LCD screens. A dry, non-abrasive microfiber cloth should do a better job.

There are several factors to consider while cleaning a PC or a Mac screen. There are many computer and monitor models from which to choose. However, displays are often either LED with LCD (liquid-crystal display) pixels or a Non-LCD glass-coated surface.

Cleaning chemicals are more likely to harm LCD screens. But because people commonly clean PCs, there are prodycrs developed to safely clean them. Be careful not to damage its surface or any of the LED elements and make sure to read the ingredients of the formula to ensure it’s right for your screen.

Any ammonia-containing cleaning solutions would leave a coating on the screen. As a result, using cleansers free of ammonia, alcohol, and acetone to clean an LCD screen is both safe and effective.

To remove stains, spritz an LCD cleaner onto a microfiber cloth; an inexpensive DIY alternative is distilled water and white vinegar mixed together in a 1:1 ratio. No cleaning alcohol should be used since it can harm the LCD screen!

Your desk at the office is not the most hygienic place, and because of this, computer screens, keyboards, and mice come into contact with germs, microbes, and bacteria, and they need regular cleaning.

Your computer screen requires cleaning at the end of every week. However, you can clean it at any time of the day before the weekends. This will ensure that computer screens are always clean.

Computer screens accumulate smudges and scratches all the time; thus, it is necessary to clean them regularly. Some cleaners are designed to clean screens and are available in online stores and computer stores. However, be careful to check the products to ensure that they don’t have active ingredients that can damage your screen.

If you have no knowledge about your computer screen type, you should refer to the user’s manual or reach out to your device’s manufacturer for assistance. You can contact them through email or on-site support chats.

Q: I have a new LCD television, and I"m not sure how to clean it. With my old tube set, I just spritzed it with Windex, but the surface of my new TV isn"t glass.

A: "We recommend using LCD cleanser that can be purchased at any electronics store," says a customer service tech for Westinghouse, a manufacturer of popular LCD televisions. The cleaner can be found in both spray and wipe form. But what exactly goes into these LCD solutions?

Kai Hui of MG Chemicals, makers of one of many available LCD cleaners, explains, "The main ingredient in most wipes on the market is water. There needs to be a small percentage of isopropyl alcohol (IPA) to help get rid of the grease from busy fingers." Some LCD cleaning solutions may include up to 50 percent IPA, according to Hui, but any more than that could damage the screens.

Since I"d never suggest you spend more money than you have to, I"d start with a clean, soft cloth and regular ol" tap water. You can add just a capful of isopropyl alcohol to a glass of water if you need something to help loosen the greasy gunk on the screen, so it can wipe off more easily. Get the cloth damp and then apply to the screen instead of splashing the screen and trying to wipe up the liquid; and always -- always -- use a clean cloth, as tiny, hard particles trapped in the fibers can scratch the surface of your screen.

Before you give into your impulses and wipe your screen with whatever you have at hand, let us stop you right there. Your display is way more delicate than you think, and if you want it to last a long time in optimal conditions, you’ll need to treat it with proper love and care.

The good news is that cleaning a computer screen is more simple than you think. You only need a soft cloth, a tiny bit of water, and the most delicate of touches.

As you would expect, not all screens are created equal, and some are more delicate than others. The safest way to figure out the proper care for your screen is to search for the make and model of your device, find out if it has an LCD, LED, or some other type of display, and search for the manufacturer’s instructions on how to care for it.

If you want to skip all that, there’s an easy way to avoid making a mistake that might not only result in irreparable damage to your screen but to your entire device. According to Joe Silverman, owner of New York Computer Help, a tech repair center in New York City, no matter how much money you spent on your computer or tablet, it probably has an LED or an LCD screen if you bought it within the last three years—and neither type benefits from window cleaner or highly concentrated alcohol.

That’s the uppermost layer of your screen, which is extremely sensitive to the acidity in alcohol and in compounds like ammonia or propylene glycol. These are often present in cleaning agents such as window cleaners and degreasers. Using these liquids will corrode the surface of your screen, resulting in scratches or even smudges you won’t be able to get rid of.

Things get even trickier when you’re dealing with touchscreens. On models like the Microsoft Surface, the display is the main input—as opposed to your mouse or trackpad on a regular laptop—so it’s ultra-sensitive, Silverman says. Using a strong liquid cleaner like a degreaser or a bleach-based disinfectant can obliterate the top layer on the screen. Combine that with high pressure, and you can kiss your fancy touchscreen computer goodbye.

Another downside to newer computers is their size and weight. If you decided to splurge on a new laptop, for example, you probably found one that has top-notch components, but also a slick, lightweight design. This format is only possible if everything in your laptop is smaller and thinner. In the case of your display, a thinner screen means a weaker barrier between your computer’s guts and the elements in the outside world.

Caring for your screen is simple—it only takes a little bit of water and a dust-free cloth, such as a microfiber wipe or the piece of fabric that came with your glasses.

First, turn off your computer and disconnect the charger. This might sound paranoid, but the benefit is twofold—you avoid any chance of triggering an electrical surge, and your screen will remain black, which will make it easier to see any dirt and grime.

Pour a couple drops of water on your cloth. Forget paper towels or the sleeve of that soft cotton t-shirt you love—microfiber is your best bet. Still, no matter how soft it is, a dry wipe could always leave micro-abrasions on your screen. The moisture will also help gather dust and particles while lifting grease from your display.

Use circular motions starting in the center of your screen and moving outward, so you don’t leave any streaks. If you can see any droplets or water traces on the glass while you clean, you’ve used way too much water. Gently dab the residual H2O with an absorbent cloth or tissue paper and start again.

If you’re dealing with next-level gunk, you can use isopropyl alcohol at 70 percent or lower, Silverman says. “That percentage is very important,” he explains. “We’d only use 90 percent or higher on dummy parts that don’t have sensors, like top cases and keyboards.” In these extreme cases, spray the alcohol on the cloth, never directly on the screen, and wipe it gently.

Just like solar damage, screen damage is cumulative. The more pressure you apply, the more abrasive a product you use, and the more often you use it, the greater the damage you’re inflicting on the protective layer of your display and the delicate sensors underneath it.

Maybe you can get away with using a high percentage of alcohol or even a window cleaner on your computer screen once or twice. But if you keep at it, eventually you’ll see the deleterious effects.

“You’ll see discoloration, lines (vertical and horizontal); sometimes it looks pretty and rainbow-like,” Silverman says. “Sometimes it’ll blink and sometimes you’ll see droplets of water or liquid in the back of the screen. There’s a lot of ways in which damage appears.”

The best way to avoid damaging your screen while cleaning it is to simply keep it from getting dirty in the first place. If you have a laptop, cover the keyboard with a thin microfiber cloth before closing it to prevent finger grease from transferring to the screen. If you have a touchscreen, wash your hands often before you use it, but make sure you let your hands dry completely before you start tapping—the soapy water or liquid hand cleanser from your fingers can easily end up on the screen and corrode it.

Wet, newly washed hands can also be detrimental to regular computers. Silverman says he often sees such victims in his shop—computers completely dead after hand sanitizer rubbed off the owner’s hands, seeped through the keyboard, and ruined the inner guts of the machine.

Your phone was designed to be carried, dropped, tapped, swiped, smashed against your face for long periods of time, and stowed in the deepest corners of your bag. In other words, its screen is way more resilient than your computer’s.

Silverman explains that most iPhones and Samsung phones, for example, have screens made out of one thick piece of glass. These, as opposed to computer screens, have all the LCD layers fused together, making them much more difficult to damage. Still, if you’re using alcohol, he recommends keeping the concentration at 70 percent or lower, using a soft cloth, and applying only low pressure to get rid of any accumulated gunk there.

Be especially careful with charging ports, as contact with water (also present in rubbing alcohol) can damage the electronics inside your smartphone. Newer models often are resistant to liquids, but there’s always a threshold to how much they can withstand. And you probably don’t want to know what that is.

Replacing the screen of your computer or smartphone can be expensive, and even if that’s not an issue for you, no one wants their devices to fail when they need them the most. So remember these tips well—we hope you never have to read this article again.

These cookies help to improve the performance of BenQ. If you want to opt-out of advertising cookies, you have to turn-off performance cookies. We also use Google Analytics, SessionCam and Hotjar to track activity and performance on the BenQ website. You can control the information provided to Google, SessionCam and Hotjar.  To opt out of certain ads provided by Google you can use any of the methods set forth here or using the Google Analytics opt out browser add-on here. To opt-out of SessionCam collecting data, you can disable tracking completely by following link：https://www.hotjar.com/privacy/do-not-track/.

These cookies are used to track your activity on the BenQ website and other websites across the Internet, help measure the effectiveness of our advertising campaign and deliver advertisements that are more relevant to you and your interests. We use various advertising partners, including Amazon, Facebook, and Google. These cookies and other technologies capture data like your IP address, when you viewed the page or email, what device you were using and where you were. You can find out how to avoid them below.

Isopropyl Alcohol is commonly found as rubbing alcohol in the grocery store, usually in a 70% isopropyl alcohol 30% distilled water mix; there is no need to dilute it when it comes that way. Some stores may sell 100% isopropyl alcohol which should be diluted. Something about the 70/30 mix causes the alcohol to evaporate away in the most efficient manner, so it"s better to do that than a 50/50 mix.

Isopropyl alcohol should be used only when distilled water won"t do the job, because repeated applications can eventually damage more delicate finishes.

Solutions that eyeglasses stores sell to clean glasses should certainly be safe for monitors, for finishes on glasses can be even more delicate. They are a good place to find the microfiber cloths which really are the best material for the job.

Windex and other ammonia-based cleaners should never be used; they WILL ruin your monitor, staining the finish a yellow color that can"t ever be removed.

We"ve all had that moment: You"re sitting at your computer or laptop and the light hits your screen in a way to reveal an unsightly accumulation of streaks, fingerprints, and dust.

To help, we round up the most important things to know about cleaning your computer screen, whether it"s a Mac or PC. While it"s a simple process, there are a few important rules to keep in mind to make sure you"re doing it safely.

Computer screens are not all made the same, and thus can"t all be cleaned the same way. You"ll want to be careful no matter your screen type, but it"s helpful to know that displays come in two categories:Glass-coated screens: The screens on newer iMac displays and MacBooks have a glass overlay. Glass displays are a little less delicate than LCD or LED screens, and mild cleaning solutions, like rubbing alcohol, are generally safe to use on them.

LCD or LED screens:Windows computers and most touchscreens and matte displays are typically not coated in glass. Extra care should be taken with these screens so not to damage the pixels that make up the display.

Since there are so many computers, laptops, and monitors out there, each with their own set of variables and specificities, it"s smart to just simply err on the side of caution.

To clean a computer screen, you really just need two things: A microfiber cloth and filtered or distilled water. That"s to say you don"t need a special store-bought cleaning solution.

If you"d like some extra sanitation power, an equal parts mixture of water and vinegar is safe no matter your screen type. If you know that your display is glass-coated, you can also use an equal parts mixture of water and 70% rubbing alcohol.What you needTwo lint-free microfiber cloths

d3sign/Getty ImagesTurn the computer or laptop off.For safety reasons, begin by letting the device cool down completely. Dust, fingerprints, and smudges are also easier to spot on a black screen.

Wipe off dust with a dry cloth. Use a dry, lint-free microfiber cloth to gently wipe away any visible dust and dirt. If necessary, apply gentle pressure to remove surface-level smudges.

If any marks remain, wipe with a lightly moistened cloth.For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.

Buff with a dry cloth and air-dry.If any streaks remain once the screen dries, gently buff them with the dry cloth. Before you turn your computer or laptop back on, allow the screen to dry completely.Note:Apple claims that you can use 70% isopropyl disinfecting wipes to clean any Apple product. Just remember not to get any liquid into the device"s ports or openings — to avoid this, you might want to wring out the wipe to remove any excess liquid before using it.

For the best advice for cleaning your screen, it"s a smart idea to check your owner"s manual, which provides the manufacturer"s specific recommendations. But since screens are especially susceptible to damage, there are a few general guidelines that apply, no matter the type of screen you own.

Turn off your computer before cleaning the screen. This is just safe practice where any amount of liquid is involved, but more specifically, any static on the screen could create a shock and damage the internal components.

Do not use abrasive cleaning solutions. This includes bleach (or any products containing bleach), hydrogen peroxide, or all-purpose spray cleaners. Using an abrasive cleaner can ruin the finish of your screen.

Use filtered or distilled water. Especially in areas with hard water, water containing minerals like calcium and magnesium can damage your screen or leave even more streaks.

Use only soft microfiber cloths.Even a fabric as soft as a cotton shirt has snags and uneven particles that can scratch a computer screen. For this reason, avoid T-shirts, towels, and paper towels. The exception is the Apple Pro Display XDR or iMac, which requires a special polishing cloth.

Never spray cleaning solution directly onto the screen. To avoid any risk of damage from excess moisture, mist the solution directly onto the microfiber cloth instead.

Do not wipe in circles. Wiping in circles can create uneven pressure and ultimately lead to screen damage. It"s also more likely to create streaking. Wipe in tight, Z-shaped motions, or in broad strokes from side to side.

Do not scrub.Apply gentle pressure only. Hard scrubbing can damage the internal components of the screen and could leave scratches or spots of discoloration or dead pixels that won"t go away.Melanie Weir

Melanie Weir is a freelance author for Insider, mainly focusing on the Tech Reference section, but occasionally contributing to Lifestyle and Entertainment topics as well. She is also a freelance writer for ScreenRant, and is the Lead Weekend News Editor at TheThings.com. In her spare time she writes plays for both stage and screen. She can be reached at melanie.weir1008@gmail.com, or through LinkedIn.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Coronavirus has brought proper disinfecting practices into the spotlight. But keeping high-touch surfaces like your laptop, keyboard, and mouse clean and disinfected is a good practice all year round.

Don’t think cleaning your computer is important? Think again. Your keyboard alone could be hosting more bacteria than a toilet seat – 400 times more, in fact.

While you should always check your computer manufacturer’s specific cleaning and disinfecting directions, in general, these tips will help you keep your PC and laptop surfaces germ-free.

DON’T spray a cleaning agent directly on your computer’s surface. Spray your cleaner onto a cloth first and then gently wipe the cloth over the surface.

Hold your keyboard at a 75-degree angle while spraying compressed air at it to ensure the dislodged debris doesn’t just resettle somewhere else on your keyboard.

Dip your microfiber cloth (or a large cotton swab) into your rubbing alcohol. Wring it out to prevent drips. Gently wipe down your keyboard with the alcohol and allow it to air dry.

The same instructions apply for laptop touchpads. Simply turn off your laptop and swipe a clean microfiber cloth dampened with rubbing alcohol across the touchpad, and let it air dry.

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

LCD Screen Cleaner works on all screens and monitors without leaving any residue. Contains plant-based cleaning agents which safely remove smudges and fingerprints from all your electronic devices. Simply spray and wipe with a microfiber cloth. Alcohol-free, ammonia-free, and streak-free!

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Dirt, dust, and fingerprint smudges aren"t likely to do any long-term damage to your gaming monitor(opens in new tab), but they still suck. Why pay all that money for a nice screen only to have the visual fidelity brought down by smudges and dust. Let"s face it, your monitor is filthy—it"s time to clean it.

You might think that cleaning your monitor is easy, and you"re right. But you still want to be careful and avoid doing things like just wiping it with the corner of your t-shirt—or even worse, a paper towel. Here are a few do"s and don"ts:

Before we start, let"s go over a few big no-no"s, as accidentally damaging your monitor is a pricey mistake we want to avoid. Unfortunately, most of your go-to cleaning products are in here, including our PC favourites like isopropyl.

First off, avoid corrosive substances! That means no alcohol- or ammonia-based cleaners (like diluted rubbing alcohol or Windex). These cleaners can damage your screen by stripping anti-reflective coatings, cause clouding, or worse. Monitors have come a long way from the giant glass bulbs of old-school CRT screens, but that means they"re a lot more sensitive too.

Next, be careful what you use to wipe the screen. Paper towels might seem like a good option, but at a microscopic level, they"re actually quite abrasive. Ditto to t-shirts or other household rags, which might be harboring a stowaway spec of sand, metal, or something else that could scratch up your display in a single wipe.

Finally, you never want to spray your cleaning agent directly onto your monitor. Excess liquid runs the risk of pooling in the corner of your screen, seeping in through tiny weak spots and wreaking havoc on the sensitive materials inside.

A mini vacuum/blower - If you"re sick of buying compressed air you can get one of these pretty cheap. They"re not as direct or as powerful but they"ll do the job and you can just recharge it instead of needing a new can.

1. Blast it — With those words of warning aside, let"s get down to the business of cleaning that monitor. For simple dustings, a blast of compressed air (the same stuff you use to knock dust out of your case fans(opens in new tab)) should do the trick, possibly followed up by a quick dry wipe-down.

2. Wipe it —As for what you wipe with, microfiber cloth is your best friend. Microfiber is extremely soft (at a microscopic level) and known for attracting dust and absorbing oils. Most importantly, it won"t damage your screen. We like these(opens in new tab), or these(opens in new tab) if you want to step up to a more plush option.

3. Wet it —For a little bit of extra cleaning power, slightly dampen your cloth with distilled water (no impurities to cause accidental damage), but not so much that water can be wrung out of it. Remember, we don"t want liquid to run down the screen and collect in the edges and corners. If water alone isn"t doing the trick, mix a cleaning solution of 50 percent distilled water, 50 percent white household vinegar. Same deal as before—apply liquid to the cloth, not the screen.

Now sit back, relax and enjoy the cleanest screen you"ve looked at in a while. Just remember to think of us now and then while you"re enjoying your gaming visual experience to its fullest capacity.

As the weather warms, it"s time for everyone"s "favorite" pastime: spring cleaning. While you"re dusting off the shelves and shoveling out a winter"s worth of detritus, spare a moment to check your TV. Dust and grime can accumulate there, and over time it can become more and more noticeable. And if you have children, there may be an array of fingerprints and other smears on the screen.

The short version? Don"t use liquids, don"t press too hard, don"t use any traditional cleaners. Microfiber cloths are good, but be gentle. Modern TVs are predominantly plastic and therefore far easier to scratch than windows or your phone.

Want the longer version? Here"s what the top TV manufacturers say about cleaning their screens:Cleaning your 4K, OLED, or LED TV screen with a soft, dry cloth is recommended. The goal here is to avoid scratching the screen. Gentle, circular motions tend to give better results, since the circular motion hits each area from several angles in a single swipe.

To clean the frame and screen, gently wipe it with a microfiber cleaning cloth. Make sure to wipe the TV frame and screen as gently as possible. TV screens are fragile and can be damaged when pressed too hard.

Important: Never use any type of window cleaner, soap, scouring powder, wax, or any cleanser with solvents such as alcohol, benzene, ammonia, or acetone. Never use abrasive pads or paper towels. If you do, you can scratch the screen or strip the anti-glare coating off the screen and cause permanent damage. Never spray water directly onto the TV. Make sure to wipe the TV as gently as possible. TV screens are fragile and can be damaged when pressed too hard.Gently wipe the screen or the exterior with a dry, soft cloth, such as an eyeglass cleaner.

For inks from oil markers on the screen, soak a cloth in a non-soap synthetic cleanser diluted (by less than 1% ) with water. Squeeze the cloth tightly to eliminate excess liquid, then wipe gently to remove the ink. Use non-soap cleansers cautiously because it may cause environmental problems when disposed improperly.

So why not Windex? Regular Windex is formulated for glass windows, plus a few other surfaces. It contains ammonia and alcohol, not the friendliest of chemicals. S. C. Johnson doesn"t explicitly say not to use Windex on TVs, but it offers Windex Electronics wipes and cleaners, so infer what you will. The better screen cleaners will clearly state that they do not contain alcohol or ammonia.

At last count, I found a billion companies making TV screen cleaners. Almost all of these are something like 99 percent water, 1 percent other stuff. Years ago I tested a handful and found them, on average, to work well enough. If you don"t have luck with a simple cloth and possibly distilled water, a screen cleaner is worth a try, and as a bonus you can also use it for your laptop, tablet and cell phone screens. Plus, they come with a microfiber cloth. If they don"t clearly state they don"t contain alcohol and ammonia, however, I would skip them.

So yeah, cleaning your TV is a good idea. But just remember that they"re exceptionally fragile. Why risk marring their surface by using cleaning methods the companies themselves don"t advise? If you damage your screen with cleaners, you won"t be able to fix it.

My advice? Get a nice microfiber cloth (if your TV didn"t come with one), and use that. If that doesn"t fix your smudges, try a cloth moist with water. Don"t press too hard. There"s less than a millimeter between your finger and a broken TV.

Screen cleaning kits are fine, though most people won"t need them. Remember, like all TV accessories, the store is selling them because they probably make more profit on that $20 kit than on a $500 TV.

He wrote a bestselling sci-fi novel about city-size submarines, along with a sequel. You can follow his adventures on Instagram and his YouTube channel.

We’ve all lived that moment when our computer monitor is met with the perfect stream of daylight, and the thought crosses your mind as you squint to see through the scattered fingerprints and dust: “Whoa, when was the last time I cleaned this thing?”

There are a few different types of screens, and your cleaning options vary between the surfaces. It’s critical to know how to clean your specific screen because, if you do it wrong, the active ingredients in the cleaning agents could affect the display of sensitive crystals or cause permanent damage in the form of streaks and scratches.

It doesn"t hurt to wipe down the surface of your keys and your mouse at the same time you"re cleaning your screen, since many germs are housed on those surfaces. Using a dry microfiber cloth is always safest when it comes to removing dust.

Are there different considerations for cleaning a Mac screen versus a PC screen? In short, yes. We know that there are hundreds of different computer and monitor models to consider, but in general, screens are either backlit LED made with LCD (liquid-crystal display) pixels, or a non-LCD glass-coated surface. And just to note, some of the newer matte glass screens are nano-texture glass, which require a special polishing cloth from the manufacturer and should be cleaned with nothing else.

LCD screens are more susceptible to damage by cleaning agents, but because they’re commonly used on PC laptops and standalone computer monitors, there are lots of easy-to-use products available to clean them. It’s not that they’re hard to clean, but you’ll have to be careful and diligent so you don’t damage the surface or any of the LED elements. Any cleaners that include ammonia will leave a film. Soap and water can cause damage. It’s always safest and most effective to use an LCD cleaner free of alcohol, ammonia and acetone to clean an LCD screen, but if you need a DIY fix, you’ll be successful if you use a microfiber cloth that’s sprayed lightly with a mix of vinegar and distilled water.

Most Mac computer screens are glass-coated and can be cleaned and resolved streak-free more easily than LCD products using glass cleaners, like Windex, or a cloth lightly sprayed with rubbing alcohol. Nano-texture glass screens on products like the Apple Pro Display XDR or iMac require use of the special polishing cloth sold by Apple.

For fingerprints and smudges, spray 70% isopropyl alcohol onto a cloth, or use a pre-moistened alcohol wipe or a Clorox Disinfecting Wipe, to clean non-porous surfaces like the screen; do not use bleach.

To clean spots and streaks on the surface of the screen, mist an LCD cleaning spray onto a dust-free side of your microfiber cloth; an easy DIY solution is 1:1 parts of white vinegar and distilled water.