can you clean lcd screen with alcohol made in china

Whether you’re gaming or burning the midnight oil on a work project, there’s nothing more annoying than a dirty computer screen. The only problem is that most computer screens are highly sensitive and require a delicate touch to prevent damage.

If you’ve ruined a monitor before or you want to keep that brand new laptop running smoothly, this article will provide you with all the information you could possibly need to keep your screen squeaky clean without damaging it.

Wondering how to clean your laptop screen without causing any damage? You don’t have to be a tech guru to understand that any kind of liquid getting into the hardware of your laptop spells disaster. Because of this, you should avoid liquid sprays.

One of the most common mistakes people make when attempting to clean their laptop computer screens is using a liquid cleaner. As a general rule, try to avoid them altogether, however, there are few safe liquid substances you can carefully use to clean laptop screens.

If you aren’t having much luck with a dry cloth or if you spilled something on your screen, you can try using a bit of rubbing alcohol (for non-LCD screens) if you don’t want to buy a specified cleaning product.

If you have an LCD screen, do not use rubbing alcohol as it will damage your screen. If you’re unsure about what products are safe for your laptop or you aren’t completely sure what kind of screen you have, look up the products that the manufacturer lists as restricted for cleaning.

With the right cloth or material, a cleaning substance may be completely unnecessary. Microfiber cloths are the best possible material to clean your PC with, since paper towels, household rags, and old T-shirts will scratch and damage your screen.

Of course, there will be instances where no amount of gentle wiping will remove the soda your toddler spilled on your laptop a week ago. In these circumstances, you may have to turn to a serious computer cleaning solution or rubbing alcohol. Just remember that when you clean your laptop’s screen, a delicate touch is vital to the long-term health of your display.

Sometimes you can’t splurge on ultra-expensive products when trying to clean your laptop screen and you have to rely on alternative methods. There are plenty of household items that can be used, such as rubbing alcohol. However, there are some that are dangerous to your screen which you should try to avoid.

A brand new sponge is a great way to clean a screen. You will need to lightly dampen the sponge (but not too much); the last thing you want is for water to drip down into your laptop.

If, and only if, you have a glass laptop screen, it’s safe to use Windex as a cleaner. Sturdier computers sometimes have a clear glass screen over the front of the display - much like a cell phone. A bit of Windex sprayed onto your microfiber cloth will certainly get the job done. But remember, never spray the Windex directly onto your laptop screen itself.

If you don’t have a microfiber cloth or a sponge fresh out of the package, a soft duster brush will work. A traditional feather duster might damage your screen but there’s a good chance you’ve adopted the Swiffer® duster into your household. These cleaning cloths are made from thousands of tiny polyester fibers and are the next best thing for cleaning your screen if you don’t have a microfiber cloth.

If you ever find yourself questioning the methods by which you plan to clean your laptop screen, it’s best to err on the side of caution. To take extra precaution, you can order specialized products and cleaning solutions online or pick them up at electronic stores.

Compressed gas is one of the best places to start when learning how to clean your laptop. Not only is this product great for removing the dust on your screen, but it’s also good for cleaning your keyboard as well. Dust-Off®, Endust®, and Fellowes® are all solid and reliable brands of compressed air that have withstood the test of time. They are available at grocery stores, drug stores, and computer stores, as well as many online retailers.

Bryson Screen and Laptop Cleaner is a reasonably inexpensive cleaning solution that’s as easy to use. Just spray it onto a screen-safe cleaning cloth and wipe away all of your worries.

The i-ScreenClean Ball 3-Pack is a great tool for daily cleaning and maintenance. With the i-ScreenClean ball, you can entirely avoid the use of liquids while you clean your laptop screen or monitor. Bigger problems like spills and stains will require the use of professional cleaning products, but for the most part, the cleaning ball is a great way to go.

The corners of your monitor or laptop screen are often the most difficult and frustrating to clean. Fortunately, cleaning brushes for detailing are available. The Oxo Good Grips cleaning brush is perfect for reaching into the corners of your laptop’s display. This tool will allow you to avoid the use of liquids and give your laptop a complete clean.

You can find most of these products online or at computer stores along with wipes and other cleaning supplies that were specifically designed for laptop screens and monitors.

Once you’ve cleaned your laptop screen, try to keep it that way. One of the primary reasons your screen continues to get dirty so often is because of your keyboard. Dead skin cells, dirt, and grime from your fingertips get on the keyboard and transfers to your laptop’s screen when you close it.

One of the best ways to prevent this transference of dirt and grime is to place a thin microfiber cloth on top of your keyboard every time you close your computer.

If you know that you’re not going to use your laptop for an extended period, be sure to keep it stored in a sealed computer bag or plastic bag. Dust and dirt can easily build up in a matter of days if your laptop is left out in in the open. You should always store your laptop whenever you’re not using it; doing so will prevent dust from building up inside the hardware.

The best thing about touch screens, especially tablets and smartphones, is that they usually come with an additional protective screen that makes it much easier to clean. However, you should still take the same precautions that you would with a standard laptop screen.

While touch screen laptops aren’t always made of the same materials that traditional smartphones and tablets are, they may often be just as sensitive. The best thing to do is pick up a microfiber cloth and give your screen a gentle wipe down using the same techniques previously mentioned.

Unless you plan to wash your hands before each time you use your touch screen laptop, you should make an effort to clean it far more frequently. All that grime on your fingertips dragging across your screen can cause a major build up.

Touch screens are especially sensitive to pressure, so make sure you don’t press down too firmly while you’re cleaning since it could wear out the sensors or even damage them. You will also want to turn your screen off before cleaning. You wouldn’t want to accidentally send out a strange jumbled-up email to an important client while you’re cleaning.

When learning how to clean your monitor or laptop screen, it’s always better to be safe than sorry. You invested a significant amount in your laptop and other electronics. It would be wise to invest a small amount in their care and upkeep. Investing in a microfiber cloth that you keep in your desk just for your laptop, along with a cleaning solution kit might cost you a few bucks but it will cost you far more to replace a damaged computer screen from careless cleaning.

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

It can be really frustrating to find several fingerprints on the display of your smartphone. Unfortunately, most smartphones today do not support fingerprint resistance. Thus, there is a continuous need to always wipe our smartphone screens to make them look cleaner. While many people are comfortable with a simple wipe using any clean cloth, some are not. Some users believe that they need some sort of disinfectant to make the smartphone screen clean. During the pandemic, various alcohol-containing disinfectants and cleaners have become common household items. We hold mobile phones in our hands every day and they can easily get contaminated with various pathogens. Since various alcohol-containing cleaners can not only clean oil stains but can also kill germs, wouldn’t it be appropriate to use them to wipe the smartphone screen? Well, don’t be too sure about how appropriate alcohol is for cleaning a smartphone screen.

While you may be tempted to use alcohol-based disinfectant to wipe your smartphone screen, please don’t. This is because if you do it incorrectly, it is likely to damage your phone or other electronic devices. Because using alcohol to wipe the smartphone screen is likely to cause irreversible serious damage to the screen. This is particularly true for LCD screens. So, why does alcohol have a strong erosive effect on LCD screens?

The liquid crystal screen is composed of multi-layer materials and its core is a sandwich structure with a layer of liquid crystal molecules sandwiched between two polarizers. Both the polarizer and the liquid crystal molecules themselves are very soluble in alcohol. Once corroded by alcohol, they will dissolve immediately and the screen will become mottled.

However, modern LCD screens, especially various touch screens, are not so fragile. Because we will also set a glass cover on the top layer of the screen, this cover mainly prevents scratches from damaging the screen. Furthermore, this later can naturally block various moisture and solvents from the outside from directly interacting with the structure below. But even so, wiping the screen with alcohol-based cleaners is a dangerous practice for two main reasons.

First, the surface of the glass cover is actually coated with a special organic film, such as an oleophobic film. This can reduce oil adsorption and ease fingerprints from dirtying the screen. Most of these coatings contain various organic compounds, and their resistance to alcohol is very weak. If they are wiped with alcohol from externally, the coatings are more likely to fall off. This will cause the display to become blurry. Of course, if the screen of the mobile phone is covered with film, then there is no need to worry too much about this problem.

Second, although the top layer of the LCD screen, that is, its surface is not so squeamish, its sides are still very fragile. Most of the LCD screens damaged by alcohol are actually because the alcohol penetrated into the gaps on the side of the screen. This means that as the user wipes with alcohol, the alcohol, finds its way into the sides of the display. It manoeuvres from the glass panel and drills directly into the lower structure. The surface tension of alcohol is weak and the capillary effect is strong. Once it finds its way into the side of the display, it will quickly penetrate into it. As we will all expect, the consequences are naturally very irritating.

If somehow, a small amount of alcohol enters the inside of the screen, you can immediately turn off the device to dry naturally. Alternatively, you can use a hairdryer to dry it carefully and this will not affect subsequent use.

From time to time, there is usually a need to clean the display of our smartphones. We also need to clean the screen of our tablet or computer. When we have such a need, all we have to do is spray some special LCD screen cleaner and wipe it with a soft cloth. This will make the screen clean and appear brand new. The LCD screen cleaner has a very good removal effect on fingerprints and oil films, and many wet wipes also have similar functions.

The active ingredients contained in these cleaning products are mainly surfactants. They have a good cleaning effect on oil stains and will not damage various organic coatings. If there is no similar cleaning agent, the LCD screen can also be cleaned with a damp cloth dipped in a very small amount of pure water. However, be very careful not to let water flow into the gaps around the screen.

To sum up, if it is just for cleaning, it is not safe to use alcohol. If there is a need for disinfection, then you should be cautious. Some mobile phone products will be sterilized with alcohol. It is recommended to read the instructions before disinfection. In addition, when disinfecting a mobile phone with alcohol, it is also recommended to first dip the alcohol on a soft cloth, and then gently wipe it with the soft cloth. Do not spray or pour alcohol directly on the screen, so as to prevent the alcohol from flowing everywhere and increase the risk of eroding the original screen and damaging the mobile phone.

There are multiple types of LCD screen cleaners that users can purchase off the shelf. If you feel that a simple cloth wipe is not enough, then try and purchase any of the LCD screen wipes on the market. As much as you can, try to avoid the use of alcohol or alcohol-based disinfectant to clean your smartphone. The adverse effect of this could be worth much more than the need to clean or disinfect the device.

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

If you have been wondering how to clean a monitor with isopropyl alcohol, then let me tell you that the answer is very simple. All you need is a lint-free cloth and a container filled with 99% pure isopropyl alcohol. To start, dip your cloth in the container of alcohol and wipe away grime from your screen without applying too much pressure. After cleaning, let the monitor dry completely before turning it on again.

Use a soft, lint-free cloth. Avoid paper towels or anything else that might contain fibers. If you"re concerned about your monitor"s finish, you should be especially careful when cleaning it with alcohol—so don"t use any kind of rag or cloth you"ve already used on something else. If you"re concerned about dust or other contaminants on the monitor itself, then go ahead and use a small piece of tape to pick up excess dust before cleaning the screen with isopropyl alcohol.

A damp cloth is best for cleaning the monitor"s screen. This will prevent you from scratching it with a dry cloth or paper towel, which could damage your screen and make it harder to see.

Use a lint-free cloth. You don"t want to leave behind any debris, so you want to avoid using paper towels or other cloths that have fibers that could stick to your screen.

Use only enough isopropyl alcohol to clean off the dust and dirt from your monitor. Overapplying the cleaning solution will cause it to evaporate too quickly and leave residue on your screen, as well as potentially damaging it if there"s too much moisture in the air.

If you"re using a circular motion with your cloth, wipe slowly and do not press down hard on any part of the surface of your display—you could cause permanent damage by scratching or marring it with too much pressure or speed! Instead, move lightly around each individual point until all traces of dust have been removed before moving onto another area (if needed).

The next step after this is drying off any excess liquid: if there is any left over after patting down with one dry portion of cloth material, use another clean section again but be careful not overdo it here so as not spill water into places where they should not go!

Let the alcohol dry completely before turning on the monitor. If you do not, it could damage your monitor and void your warranty. Allow at least five minutes for a regular monitor, and overnight for laptops—the liquid will evaporate faster in warmer weather than in colder.

If you are looking for a way to clean your monitor, then consider using isopropyl alcohol. Isopropyl alcohol is a common solvent used in the medical and pharmaceutical industries, as well as one of the most effective disinfectants around. You can find it at your local drug store or supermarket, usually labeled “rubbing alcohol” or “isopropyl rubbing alcohol”.

Isopropyl alcohol is also very safe to use on monitors because they do not contain any oil or other contaminants that can be removed by detergents such as soap. Another benefit of this cleaner is that it will remove fingerprints without leaving any residue behind (unlike commercial cleaners).

Cleaning your monitor with isopropyl alcohol is a simple way to keep it looking good. It’s also cheap and easy to do, so there’s no reason not to try it. The alcohol will remove dust and fingerprints from both LCD and CRT monitors, leaving them looking like new again!

Screens, especially touchscreens, collect a lot of dirt, grease and hair. This means that periodic cleaning is something we all have to and should do.

Now, plenty of people get away with wiping a smartphone screen against their t-shirt or pants or using a sleeve to clean a laptop display, but this is not the best way and can itself damage the display.

Do a quick search on the internet, and you"ll find that isopropyl alcohol is the weapon of choice in cleaning displays. This is true, but if used incorrectly, this chemical can also damage the display.

The big DON"T of using isopropyl alcohol is this -- don"t pour or even spray isopropyl alcohol on your display. If you put too much isopropyl alcohol on a screen, damage can occur in two ways:The isopropyl alcohol can seep between the layers of the display, completely ruining it and requiring the device to have a replacement screen fitted

Apple has, naturally, published detailed information on safely cleaning a whole range of products, from notebooks to tablets to smartphones. While this is aimed at Apple users, the information applies to other brands too.

We"ve all had that moment: You"re sitting at your computer or laptop and the light hits your screen in a way to reveal an unsightly accumulation of streaks, fingerprints, and dust.

To help, we round up the most important things to know about cleaning your computer screen, whether it"s a Mac or PC. While it"s a simple process, there are a few important rules to keep in mind to make sure you"re doing it safely.

Computer screens are not all made the same, and thus can"t all be cleaned the same way. You"ll want to be careful no matter your screen type, but it"s helpful to know that displays come in two categories:Glass-coated screens: The screens on newer iMac displays and MacBooks have a glass overlay. Glass displays are a little less delicate than LCD or LED screens, and mild cleaning solutions, like rubbing alcohol, are generally safe to use on them.

LCD or LED screens:Windows computers and most touchscreens and matte displays are typically not coated in glass. Extra care should be taken with these screens so not to damage the pixels that make up the display.

Since there are so many computers, laptops, and monitors out there, each with their own set of variables and specificities, it"s smart to just simply err on the side of caution.

To clean a computer screen, you really just need two things: A microfiber cloth and filtered or distilled water. That"s to say you don"t need a special store-bought cleaning solution.

If you"d like some extra sanitation power, an equal parts mixture of water and vinegar is safe no matter your screen type. If you know that your display is glass-coated, you can also use an equal parts mixture of water and 70% rubbing alcohol.What you needTwo lint-free microfiber cloths

d3sign/Getty ImagesTurn the computer or laptop off.For safety reasons, begin by letting the device cool down completely. Dust, fingerprints, and smudges are also easier to spot on a black screen.

Wipe off dust with a dry cloth. Use a dry, lint-free microfiber cloth to gently wipe away any visible dust and dirt. If necessary, apply gentle pressure to remove surface-level smudges.

If any marks remain, wipe with a lightly moistened cloth.For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.

Buff with a dry cloth and air-dry.If any streaks remain once the screen dries, gently buff them with the dry cloth. Before you turn your computer or laptop back on, allow the screen to dry completely.Note:Apple claims that you can use 70% isopropyl disinfecting wipes to clean any Apple product. Just remember not to get any liquid into the device"s ports or openings — to avoid this, you might want to wring out the wipe to remove any excess liquid before using it.

For the best advice for cleaning your screen, it"s a smart idea to check your owner"s manual, which provides the manufacturer"s specific recommendations. But since screens are especially susceptible to damage, there are a few general guidelines that apply, no matter the type of screen you own.

Turn off your computer before cleaning the screen. This is just safe practice where any amount of liquid is involved, but more specifically, any static on the screen could create a shock and damage the internal components.

Do not use abrasive cleaning solutions. This includes bleach (or any products containing bleach), hydrogen peroxide, or all-purpose spray cleaners. Using an abrasive cleaner can ruin the finish of your screen.

Use filtered or distilled water. Especially in areas with hard water, water containing minerals like calcium and magnesium can damage your screen or leave even more streaks.

Use only soft microfiber cloths.Even a fabric as soft as a cotton shirt has snags and uneven particles that can scratch a computer screen. For this reason, avoid T-shirts, towels, and paper towels. The exception is the Apple Pro Display XDR or iMac, which requires a special polishing cloth.

Never spray cleaning solution directly onto the screen. To avoid any risk of damage from excess moisture, mist the solution directly onto the microfiber cloth instead.

Do not wipe in circles. Wiping in circles can create uneven pressure and ultimately lead to screen damage. It"s also more likely to create streaking. Wipe in tight, Z-shaped motions, or in broad strokes from side to side.

Do not scrub.Apply gentle pressure only. Hard scrubbing can damage the internal components of the screen and could leave scratches or spots of discoloration or dead pixels that won"t go away.Melanie Weir

Melanie Weir is a freelance author for Insider, mainly focusing on the Tech Reference section, but occasionally contributing to Lifestyle and Entertainment topics as well. She is also a freelance writer for ScreenRant, and is the Lead Weekend News Editor at TheThings.com. In her spare time she writes plays for both stage and screen. She can be reached at melanie.weir1008@gmail.com, or through LinkedIn.

Don"t make the mistake of thinking that LCD screens work like your nifty new iPad. In general, touching should be off limits because pressing too hard on the screen can actually break or crack pixels. So the first rule to cleaning an LCD screen is don"t do it unless you have to (i.e. unless it"s actually dirty).

Many retailers offer special cleaning solutions for LCD screens, but the truth is that most of these are made up primarily of water. So, if you don"t want to take the time to go buy a cleaner or you want to save the money (maybe to put toward that "What Not to Wear" dress), you can just make your own LCD cleaner by mixing water with some vinegar or isopropyl alcohol -- the solution should be no more than 50/50.

You could even start with plain water and see if you need the vinegar or alcohol, which will come in handy when you"re trying to wipe away greasy fingerprints. Some people recommend only using distilled water, but regular water works fine, according to Dave Chipman from Sharp.

Unless you want to end up with a melted, discolored, hazy or scratched LCD screen, steer clear of all spray cleaners. In particular, don"t use any solvent cleaners that include acetone, ethyl alcohol, ethyl acid, ammonia or methyl chloride. You also want to avoid using any materials that could potentially scratch the screen"s delicate surface. Opt for a soft, clean, cotton cloth instead of wood-based products like paper towels and tissues. Chipman suggests using a microfiber cloth for best results.

If you"re lucky enough to have a service come in and do your cleaning for you, make sure they don"t inadvertently ruin your television or monitor by trying to clean it with something like glass cleaner. You should either take the time to explain -- and maybe even demonstrate -- how you want your LCD screen cleaned or just ask your cleaner to leave this particular job for you.

If your screen is still dirty, apply a small amount of 70~75% isopropyl alcohol (IPA) solution to your cloth and gently wipe down the exterior of your screen. Alternatively, you can also use a 70~75% IPA wipe.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Dirt, dust, and fingerprint smudges aren"t likely to do any long-term damage to your gaming monitor(opens in new tab), but they still suck. Why pay all that money for a nice screen only to have the visual fidelity brought down by smudges and dust. Let"s face it, your monitor is filthy—it"s time to clean it.

You might think that cleaning your monitor is easy, and you"re right. But you still want to be careful and avoid doing things like just wiping it with the corner of your t-shirt—or even worse, a paper towel. Here are a few do"s and don"ts:

Before we start, let"s go over a few big no-no"s, as accidentally damaging your monitor is a pricey mistake we want to avoid. Unfortunately, most of your go-to cleaning products are in here, including our PC favourites like isopropyl.

First off, avoid corrosive substances! That means no alcohol- or ammonia-based cleaners (like diluted rubbing alcohol or Windex). These cleaners can damage your screen by stripping anti-reflective coatings, cause clouding, or worse. Monitors have come a long way from the giant glass bulbs of old-school CRT screens, but that means they"re a lot more sensitive too.

Next, be careful what you use to wipe the screen. Paper towels might seem like a good option, but at a microscopic level, they"re actually quite abrasive. Ditto to t-shirts or other household rags, which might be harboring a stowaway spec of sand, metal, or something else that could scratch up your display in a single wipe.

Finally, you never want to spray your cleaning agent directly onto your monitor. Excess liquid runs the risk of pooling in the corner of your screen, seeping in through tiny weak spots and wreaking havoc on the sensitive materials inside.

A mini vacuum/blower - If you"re sick of buying compressed air you can get one of these pretty cheap. They"re not as direct or as powerful but they"ll do the job and you can just recharge it instead of needing a new can.

1. Blast it — With those words of warning aside, let"s get down to the business of cleaning that monitor. For simple dustings, a blast of compressed air (the same stuff you use to knock dust out of your case fans(opens in new tab)) should do the trick, possibly followed up by a quick dry wipe-down.

2. Wipe it —As for what you wipe with, microfiber cloth is your best friend. Microfiber is extremely soft (at a microscopic level) and known for attracting dust and absorbing oils. Most importantly, it won"t damage your screen. We like these(opens in new tab), or these(opens in new tab) if you want to step up to a more plush option.

3. Wet it —For a little bit of extra cleaning power, slightly dampen your cloth with distilled water (no impurities to cause accidental damage), but not so much that water can be wrung out of it. Remember, we don"t want liquid to run down the screen and collect in the edges and corners. If water alone isn"t doing the trick, mix a cleaning solution of 50 percent distilled water, 50 percent white household vinegar. Same deal as before—apply liquid to the cloth, not the screen.

Now sit back, relax and enjoy the cleanest screen you"ve looked at in a while. Just remember to think of us now and then while you"re enjoying your gaming visual experience to its fullest capacity.

Please download our data sheets and product information for further reading.Safety Data Sheet (SDS)Product Information SheetsScreen clean comparison guide

AF Screen clene is a pump spray bottle that banishes grease and fingerprints in a convenient spray. Used with AF cloths screens will be sparkling like new.2) Why cant I just use tissue to clean my screen?

Ordinary tissues may scratch certain types of screen and most of them will leave paper residue. A correctly formulated cleaning cloth should do neither.3) Can alcohol based products be used on screens and filters?

No, alcohol based products can damage filter screens and special coatings on monitor screens. AF products are specially formulated without alcohol and are therefore safe to use on all screens and filters.4) My mobile phone and IPad seem to consistently suffer from greasy finger prints; do you have a quick solution?

We have a variety of screen cleaning solutions from wet and dry wipes to travel size pump sprays and cloths. The NEW AF Smartwipe is a washable, super strong dry wipe that absorbs grease and leaves a sparkling finish.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Before you give into your impulses and wipe your screen with whatever you have at hand, let us stop you right there. Your display is way more delicate than you think, and if you want it to last a long time in optimal conditions, you’ll need to treat it with proper love and care.

The good news is that cleaning a computer screen is more simple than you think. You only need a soft cloth, a tiny bit of water, and the most delicate of touches.

As you would expect, not all screens are created equal, and some are more delicate than others. The safest way to figure out the proper care for your screen is to search for the make and model of your device, find out if it has an LCD, LED, or some other type of display, and search for the manufacturer’s instructions on how to care for it.

If you want to skip all that, there’s an easy way to avoid making a mistake that might not only result in irreparable damage to your screen but to your entire device. According to Joe Silverman, owner of New York Computer Help, a tech repair center in New York City, no matter how much money you spent on your computer or tablet, it probably has an LED or an LCD screen if you bought it within the last three years—and neither type benefits from window cleaner or highly concentrated alcohol.

That’s the uppermost layer of your screen, which is extremely sensitive to the acidity in alcohol and in compounds like ammonia or propylene glycol. These are often present in cleaning agents such as window cleaners and degreasers. Using these liquids will corrode the surface of your screen, resulting in scratches or even smudges you won’t be able to get rid of.

Things get even trickier when you’re dealing with touchscreens. On models like the Microsoft Surface, the display is the main input—as opposed to your mouse or trackpad on a regular laptop—so it’s ultra-sensitive, Silverman says. Using a strong liquid cleaner like a degreaser or a bleach-based disinfectant can obliterate the top layer on the screen. Combine that with high pressure, and you can kiss your fancy touchscreen computer goodbye.

Another downside to newer computers is their size and weight. If you decided to splurge on a new laptop, for example, you probably found one that has top-notch components, but also a slick, lightweight design. This format is only possible if everything in your laptop is smaller and thinner. In the case of your display, a thinner screen means a weaker barrier between your computer’s guts and the elements in the outside world.

Caring for your screen is simple—it only takes a little bit of water and a dust-free cloth, such as a microfiber wipe or the piece of fabric that came with your glasses.

First, turn off your computer and disconnect the charger. This might sound paranoid, but the benefit is twofold—you avoid any chance of triggering an electrical surge, and your screen will remain black, which will make it easier to see any dirt and grime.

Pour a couple drops of water on your cloth. Forget paper towels or the sleeve of that soft cotton t-shirt you love—microfiber is your best bet. Still, no matter how soft it is, a dry wipe could always leave micro-abrasions on your screen. The moisture will also help gather dust and particles while lifting grease from your display.

Use circular motions starting in the center of your screen and moving outward, so you don’t leave any streaks. If you can see any droplets or water traces on the glass while you clean, you’ve used way too much water. Gently dab the residual H2O with an absorbent cloth or tissue paper and start again.

If you’re dealing with next-level gunk, you can use isopropyl alcohol at 70 percent or lower, Silverman says. “That percentage is very important,” he explains. “We’d only use 90 percent or higher on dummy parts that don’t have sensors, like top cases and keyboards.” In these extreme cases, spray the alcohol on the cloth, never directly on the screen, and wipe it gently.

Just like solar damage, screen damage is cumulative. The more pressure you apply, the more abrasive a product you use, and the more often you use it, the greater the damage you’re inflicting on the protective layer of your display and the delicate sensors underneath it.

Maybe you can get away with using a high percentage of alcohol or even a window cleaner on your computer screen once or twice. But if you keep at it, eventually you’ll see the deleterious effects.

“You’ll see discoloration, lines (vertical and horizontal); sometimes it looks pretty and rainbow-like,” Silverman says. “Sometimes it’ll blink and sometimes you’ll see droplets of water or liquid in the back of the screen. There’s a lot of ways in which damage appears.”

The best way to avoid damaging your screen while cleaning it is to simply keep it from getting dirty in the first place. If you have a laptop, cover the keyboard with a thin microfiber cloth before closing it to prevent finger grease from transferring to the screen. If you have a touchscreen, wash your hands often before you use it, but make sure you let your hands dry completely before you start tapping—the soapy water or liquid hand cleanser from your fingers can easily end up on the screen and corrode it.

Wet, newly washed hands can also be detrimental to regular computers. Silverman says he often sees such victims in his shop—computers completely dead after hand sanitizer rubbed off the owner’s hands, seeped through the keyboard, and ruined the inner guts of the machine.

Your phone was designed to be carried, dropped, tapped, swiped, smashed against your face for long periods of time, and stowed in the deepest corners of your bag. In other words, its screen is way more resilient than your computer’s.

Silverman explains that most iPhones and Samsung phones, for example, have screens made out of one thick piece of glass. These, as opposed to computer screens, have all the LCD layers fused together, making them much more difficult to damage. Still, if you’re using alcohol, he recommends keeping the concentration at 70 percent or lower, using a soft cloth, and applying only low pressure to get rid of any accumulated gunk there.

Be especially careful with charging ports, as contact with water (also present in rubbing alcohol) can damage the electronics inside your smartphone. Newer models often are resistant to liquids, but there’s always a threshold to how much they can withstand. And you probably don’t want to know what that is.

Replacing the screen of your computer or smartphone can be expensive, and even if that’s not an issue for you, no one wants their devices to fail when they need them the most. So remember these tips well—we hope you never have to read this article again.

A variety of chemicals can be found throughout the electronic assembly and repair process, but no solvent appears more commonly than isopropyl alcohol. It is universally used for cleaning and as a main constituent of fluxes, but how much do you really know about isopropyl alcohol?

Isopropyl alcohol (CAS #67-63-0) is also referred to as IPA, isopropanol, 2-propanol, and even rubbing alcohol (more on that later). It dissolves a wide range of both polar and nonpolar soils, and is often used to dissolve and remove light oils, fingerprints, cutting fluids, flux residues, carbon deposits, and mold release. It is also readily miscible in water, which makes it an effective drying agent.

For electronic printed circuit board (PCB) assembly, you will find isopropyl alcohol being used either to clean flux residues from recently soldered circuit boards, or in PCB repair and rework. IPA is also used to remove solder paste or adhesive from SMT stencils. Maintenance cleaning with isopropyl alcohol is common for removing caked-on and burnt-on flux from SMT reflow ovens, wave soldering fingers, selective soldering nozzles, pallets, and anywhere else flux tends to collect in automated soldering processes.

Isopropyl alcohol is generally compatible with most materials used in electronics. As with any chemical product used, component compatibility must be determined on a non-critical area prior to use. The following are a list of common materials used in PCB assembly and their respective compatibility ratings:

When a solvent is not compatible with a substrate, it may cause crazing (micro-cracks) or soften the material. In the case of seals or gaskets, this incompatibility will cause parts to swell, shrink, or become brittle. This video shows an extreme example of acetone on polycarbonate, which causes it to fog, soften, and even scratch from contact with the plastic dropper.

Isopropyl alcohol is available in a large number of varieties and grades, which are generally differentiated by the amount of water in the solution and trace amounts of other chemicals or nonvolatile materials.

Isopropyl alcohol is hydrophilic, so it readily accepts water into an azeotropic solution. When you see on the label “70% isopropyl alcohol”, it refers to amount of alcohol in relation to the amount of dissolved water – i.e. 70% alcohol to 30% water. Water can be removed to form purer grades of isopropyl alcohol, resulting in what is called “anhydrous” isopropyl alcohol.

Whether an IPA has 0.2% or 50% water has little effect on the look and smell of the material, but greatly impacts surface tension (its ability to wet) and the dry time. The more water isopropyl alcohol contains, the greater the surface tension. This causes the solvent to bead up more as it dries rather than wet or sheet, which can lead to spotting. “Water spots” are particularly problematic when cleaning mirrors, lenses, and other optics.

The dry time is greatly increased as the percentage of water in the alcohol solution is increased. This can be an advantage or disadvantage depending on the application. For example, isopropyl alcohol is often used as a flux remover to remove flux residues from around solder joints. Technicians tend to prefer a fast dry time so that they can clean the electronics and bring them back into service as quickly as possible. When breaking down and removing thick, gummy, or baked-on materials, more dwell or soak time is required. Slowing down the dry time often improves the cleaning effectiveness. That is one of the reasons 70% pure isopropyl alcohol is commonly used for degreasing and SMT stencil cleaning. In the case of electrical contact cleaning, the faster evaporation time helps ensure that the flammable solvent is gone before energizing the equipment.

ACS / reagent grade- meets or exceeds purity standards set by the American Chemical Society (ACS). This grade is specified for food, drug, or medicinal use and other applications that require strict quality specifications and purity over 95%.

The general term “rubbing alcohol” is often used for isopropyl alcohol, but users looking to buy a specific grade of alcohol should avoid products labeled that way. Rubbing alcohol does not refer to a specific grade, and may even be a different type of alcohol, like ethanol (also called ethyl alcohol, CAS #67-17-5). Consumer rubbing alcohol can also contain other ingredients like denaturant, fragrances, and colorants that are potential contaminants. ASTM D770 (currently on revision 11(2019)) is the standard specification for isopropyl alcohol published by ASTM International.

As mentioned above, isopropyl alcohol is also available in different grades, or percentages of solvent to water, to fit a variety of specific applications. When deciding on the best isopropyl product for a particular manufacturing or repair process, first decide on the grade of solvent, then the packaging.

Bulk containers- Isopropyl alcohol is packaged in 1 gallon bottles, 5-gallon containers, 54-gallon drums, and even totes for automated dispensing. In most cases, a spigot can be attached to the 1 and 5 gallon containers for convenient dispensing in benchtop or workstation use. When transferring to another container, make sure the smaller bottle is properly marked with the chemical name and warning information.

Small bottles / spray bottles- To avoid the risk and hassle of pouring and labelling smaller containers, isopropyl alcohol is also available in smaller plastic containers like pints and quarts. Some have a trigger spray attachment for convenient cleaning.

Pump dispensers / dauber bottles- Empty bottles are available to make dispensing even more convenient. A wipe or swab can be saturated in the opening, which is filled with a valve when the user pushes down. This keeps the isopropyl alcohol sealed, which avoids cross contamination when a wipe is resaturated after use, causing it to draw in moisture from the ambient air. These bottles can come with a variety of features including ESD-safe materials and a selection of labels for standard chemicals like IPA.

Aerosol cans- An aerosol can is a sealed container, so it has some of the advantages of a pump dispenser. In addition, the propellant forces the solvent out of the can, creating agitation as it hits the substrate.

Presaturated wipes- For the ideal mix of form and function, wipes are available, and are already saturated with isopropyl alcohol. They can come in pop-up tubs where the wipes are pulled up from the top, plastic boxes or pouches that reduce linting caused by wipe perforations, and even individually wrapped packages. The individually wrapped wipes are perfect for field maintenance because they fit neatly in a tool box.

Although isopropyl alcohol is generally considered safe if handled properly, it is a flammable solvent, so precautions need to be taken to prevent a dangerous situation from developing.

Storage- because isopropyl alcohol is very flammable, it needs to be stored in a closed container in a cool, well-ventilated area away from ignition sources like heat, sparks and flames. It has an NFPA rating of 3, so it should be stored in a cabinet or room designed for that type of hazardous material. If solvent is transferred to another container, make sure it is marked with the chemical name and required warning information.

Personal protection equipment- isopropyl alcohol has a tendency to defatten the skin, which means it draws out the protective oils from the skin and can lead to dermatitis if improperly handled. Gloves made of nitrile or other solvent-resistant materials should be worn. Glasses or even a face shield should be worn if the user is spraying an IPA product, or if splashing could occur. Respirators can be used if ventilation is not adequate enough to avoid breathing in a high concentration of vapors.

Disposal- isopropyl alcohol needs to be disposed of as a hazardous liquid according to state and local requirements. It certainly cannot be flushed down the drain, and additional disposal requirements may need to be followed depending on the soils dissolved in the waste material.

Safety Data Sheets (SDS)- The central resource for all safety requirements is the SDS, which should be readily available wherever isopropyl alcohol is used.

Is it any wonder isopropyl alcohol can be found in all corners of electronic PCB assembly, rework and repair operations? It is effective, reasonably priced, and safe if handled properly. To buy isopropyl alcohol in the grade and packaging that is best for your application, go to www.techspray.com.

Cleaning your LCD computer screen is not quite as straightforward as cleaning a CRT computer screen. LCD screens are sensitive, and it is easier for them to become scratched or damaged. You can still clean your LCD computer screen, but you must be very careful.

Turn off your LCD computer screen on your monitor prior to cleaning. This enables you to see the areas that need to be cleaned, such as smudges and fingerprints.

It is important the you do not use any old cloth or paper product to clean your LCD screen. A microfiber cloth is less likely to scratch, or otherwise damage your screen.

When using the microfiber cloth to clean the screen, apply light pressure to remove dust, oil and other unwanted marks. Avoid using extra pressure on resistant areas.

If a dry microfiber cloth does not get the LCD screen totally clean, dampen the cloth with distilled or deionized water. If even that does not provide satisfactory results, you can combine equal amounts of white vinegar and distilled or deionized water, and use that solution for cleaning the LCD monitor. Alternatively, you can add a small amount of isopropyl alcohol to distilled water to help clean the LCD screen.

Paper towels, toilet paper, tissue paper and newspaper can scratch your LCD monitor, so never use them for cleaning it. Rely on a microfiber cloth instead.

Never use cleaning products that contain ammonia, ethyl alcohol, acetone, toluene, ethyl acid or methyl chloride. These chemicals can cause the screen to yellow, become brittle or even crack.

If a cleaning solution is sprayed onto the LCD screen, it is likely to run down the screen and cause damage. Always apply any water or cleaner to the microfiber cloth, and use the dampened cloth to clean the monitor.

Cleaning your LCD computer screen takes just a few minutes. All you need is a microfiber cloth, perhaps some distilled or deionized water, a bit of vinegar and a gentle touch.

Television screens are supposed to be clean and free of dirt, dust, or any debris that may blur vision. This is why this component is one of the most vital parts of a Television. Nothing can be worse than straining your eyes to make sense of the pictures your set is projecting. If you do not clean your TV regularly, fingerprint smudges and dust will build up.

Cleaning your LED TV or any type of television for that matter is something you should do at least once every 2 or 3 weeks. In fact, I will suggest that you do it as often as you watch it any paying more attention to the screen when you do so. If you clean your TV set regularly, it will always look brand new, and you will enjoy bright and colorful pictures without said. Bearing that in mind, there are ways to go about a cleaning endeavor. Unfortunately, not everyone knows how to clean a set effectively. Many think that a piece of towel soaked in water will do. How wrong they are. Television screens are very sensitive, so a great deal of care is required to do the job effectively. In addition to that, being careful also protects the screen for damage. Secondly, you need to understand that TV sets are different. Although they all project sounds and images, they are built differently. So, therefore, the approach to cleaning should also be different as well.

The approach to cleaning an LED TV screen, for instance, requires extra care compared to the cleaning of a Tube TV. They both have screens, but the former is more sensitive than the latter due to the sensitivity of LED screens build material. Bearing all this in mind, how do you safely clean an LED TV screen without damaging it in the process. In this article, we will show you safe and intelligent ways to go about it using available and affordable materials. You will also learn a few tips about how to do it safely too.

Before you proceed, you need to bear two things in mind when cleaning LED TV screens. Firstly, you want to do it in such a way and with the right materials that ensure the screen is clean and devoid of dust or stains of any kind. You want your screen to be as bright and clear as possible. Secondly, you want to avoid damaging the screen or reducing its projection quality. This is why it is necessary to use only the right cleaning materials and approach at all times. Now, here are some helpful tips for adopting when cleaning an LED television screen. [/fusion_text]

Every electronic equipment comes with an owner’s manual. This manual provides the user with sufficient information about how to use and maintain the gadget. The same thing goes for LED sets. They come with an owner’s manual too. Before you clean the set, you may want to read the manual first.

In fact, it is advisable that you read it first immediately you buy and install it in your home. By reading the manual, you gain more understanding regarding how to care for the television all through it a lifespan in your home, office, or wherever you install it. For the purpose of cleaning, pay attention to the section that provides information about how to do it effectively.

Reading manuals is important because different television manufacturers provide different approaches to cleaning their sets. What works for an LG LED TV may not work for a Samsung set. That is why it is so important to only follow the recommendation of a one cap fits all approach to cleaning your TV screen. If you read the manual when you bought it, but you have forgotten the cleaning details, consult it once again to refresh your memory.

Before you start the cleaning properly, turn off the television set. Do not stop at that. You also need to unplug it from the power source. Once you have done that, do not start cleaning the screen immediately. Give it time to cool down. The cleaning process may take between 2-5 minutes or even more depend on your LED TV model or how long it was on.

Turning the TV off will cut off power leading to the cooling down of the screen. You don’t want to be cleaning a hot or warm screen, do you? You want to make sure that the screen is as cool as possible and non-reactive to whichever cleaning agent you use.

Another advice to take in that is so important is that you should never use paper towels to clean the screen. There are reasons to avoid paper towels. Paper towels, especially when soaked in water, leave smudges and stains on the screen. No matter how long or how hard you try to wipe the marks off, they yet remain. Paper towels are bad for your TV screen. It’s as simple as that.

To enjoy an ultimate cleaning experience, you should consider using microfiber cleaning pieces. Some people recommend cotton whole because they are more breathable. However, microfiber cloths are more durable. In addition, they do not stick to your screen. Older LED, or LCD screens can’t handle traditional cleaning methods or materials. With microfiber, you can eliminate stains, remove smudges, and fingerprints with ease.

To use microfiber, simply wipe the surface of the screen in a circular motion. Cover as much part of the screen as you possibly can. Work your way around the edges as well. More importantly, when cleaning, avoid touching the screen with your bare hands as doing so will leave fingerprint marks on it.

The use of chemicals should be avoided at all costs. Chemicals damage screens more than you know. That a chemical agent worked on a particular surface is not an indication that it will work well for your TV screen. LED screens are very sensitive and fragile, so you ought to make sure that you keep chemicals as far away as possible. Another material you should never use is a detergent solution (water and detergent).

Soap, scouring powder, was window cleaners, and any other general industrial cleaner should be avoided. Abrasive pads and towels made from paper should not be used either. Using any of these materials will lead to screen scratches, anti-glare coating damage, or permanent screen damage. The sad part is that the damage may not be noticeable at first, but over time, the same will become permanent.

If you must wet your cleaning material with water, do so in little splashes. Avoid spraying the screen directly with water. When wiping the screen, do so gently because it can break if pressed too hard as screens are very fragile.

You will notice that your microfiber cloth cannot reach the edges of the screen like the other areas. If you don’t clean the edges too, dust and first will accumulate in those parts, and after a time removing the stains will love difficult. Furthermore, failure to clean screen edges will lead to an uneven appearance, with poor picture quality being the end result. To clean edges and corners effectively, use cotton swabs to greater effect. For better results, dab the cotton swabs in water. Pick off the dirt carefully by dragging them out using the swabs. Do this for the four corners of the screen.

As for the edges, run the swabs up and down systematically but avoid running them all the way down to the edges as this may drive dirt further on that may be difficult to remove. For better results, use as many cotton swabs as you can.

Unlike an LED TV screen, cleaning a Tube TV is much easier. Tube TV screens are more rugged and can withstand pressure, but doing so carefully is also important. You can use a microfiber cleaning cloth doused in a little water. Never spray the screen directly as this may damage it. Rather, work your way with the microfiber cloth. Apply the same circular cleaning motion like you would do an LED TV screen. Cotton swabs will also come in handy to pick off the dirt from the screen corners.

Dish soap can also be used on LED and LCD screens, albeit with care. Before you use a dish soap solution, first wipe the screen with a dry cloth to remove dust. Now, dip your cleaning cloth in the dish soap solution. Squeeze off the liquid then gently wipe the screen. Make sure you cover every surface area. Once you are done, don’t waste time to clean; otherwise, the solution will dry up on the screen leading to a blurry vision. Rinse the cloth with water to remove soapy residue then take the dry cloth you used to wipe off the dust once again to dry the screen.

Yes, they do. There are actually cleaners specially made for cleaning tv screens. Screen cleaners contain distilled water, isopropyl, and alcohol solutions. If you must use an electronic screen cleaner, make sure you shake to content before use. Also, apply on a limited portion of your cleaning cloth.

Cleaning your TV remote control is part of a general TV cleaning process. So to clean your remote control, follow these tips. Pop-out the batteries:Remove the batteries from the remote. Doing so will create enough room when cleaning the interior casing.

Use a mild disinfectant:Apply a cleaning disinfectant on a piece of cloth and clean the body thoroughly. The use of disinfectant is necessary because our hands carry germs, and we transfer these germs to the remote control anytime we operate it. Clean the whole body thoroughly.

Maintain a weekly timetable:To ensure that your TV set is always clean, make sure you clean it weekly. Add it as part of your to-do list when cleaning your home. If your furniture deserves regular cleaning, so does your television set. Doing regular cleaning will atop dust, debris and fingerprints from smearing the screen. It is also much easier to clean when there is little dust on the surface. Keeping a microfiber cloth close by is also advised so that you can quickly wipe off dust when necessary.

Never spray your LED TVset directly with any substance:Avoid spraying your screen directly with any substance even if it is an electronic cleaning gel. Excessive spraying can damage the cabinet and the structural make-up of the screen. If you must use any cleaning solution, apply it on the napkin or microfiber cloth you are using and gently wipe the screen with it.

Use a Vacuum:To draw out dust and debris hidden in the crevices of the set, use a low suction vacuum. You may also use the vacuum cleaner’s soft brush to remove dust from the cable, vents, and ports of the TV

Adhere strictly to the User Manual:Your LED TV set comes with a user manual for a reason. The manual is meant to guide your use of the device. When cleaning your set, make sure you follow the directives of the manufacturer. Doing it any other way may damage the TV beyond repair.

Avoid strong cleaning agents:Just like we pointed out in the article, avoid strong cleaning agent as not all of them are good for your television’s screen. The screen is very sensitive, so bear this in mind. Some examples of cleaning agents to avoid include unmixed alcohol, ammonia, acetone, and Wax.

Maintaining your LED TV set requires a lot of patience and attention to detail. If you want the screen to remain in good shape, you need to clean it regularly and with proper cleaning materials. If you follow the tips in this article, your screen will remain bright and sharp for as long as you use the set.

Over time, dirt, smudges, dust, and more can reduce the picture quality on an LCD, much like looking through a dirty pair of glasses. Cleaning an LCD screen is a simple and straightforward process.

3. Do not spray any cleaning fluid directly on the LCD screen to prevent liquid from dripping inside of it. (This also applies to touch screen monitors.)

4. A suitable cleaning solution for LCDs is a mixture of 50% Isopropyl alcohol and 50% distilled or otherwise purified water. For touch screens, 5-10% bleach may be used to clean the touch glass without harming it.

5. For purposes of disinfecting, benzyl alcohol and/or hydrogen peroxide can be used without harming the LCD screen and/or Touch Screen; please f