tft lcd monitor mobile remote factory

Our wholesale remote controller tft lcd tv devices support all the universal and niche devices that your inventory supports. When we hear the term remote controller tft lcd tv, our minds may jump to the TV remote, or perhaps an air conditioner remote, or maybe a remote garage door opener, but wireless technology now supports a large variety of electronic devices and functions. Browse our wholesale catalogue and stock up on the latest universal remotes as well as those replacement remotes for those popular consumer devices and smart home devices that are needed in your area.

Wireless remote controller tft lcd tv devices are available for more devices than we might immediately imagine. As our consumer electronics get more complex, smarter, and more interconnected across the internet of things (IoT), the opportunity to control our devices remotely becomes increasingly possible and increasingly common. Today you can find remove devices that can perform functions across short-range wireless signals common in our phones and other IoT devices including our cars, our toys, our vacuum cleaning robots, and many others. Of course, we most commonly use our remote controller tft lcd tv for our entertainment devices such as our TVs, our cable boxes, or our music systems, but the application of wireless control devices is a growing area of technology innovation.

Expand your remote controller tft lcd tv inventory with our wholesale offerings at competitive prices. Find the common remote controller tft lcd tv devices to replace those specific, broken models, and also find universal remotes that combine our ability to control multiple devices with a single clicker. Don"t limit your inventory to just a few remote controller tft lcd tv devices, instead, upgrade your selection with the many new devices that our wholesalers offer.

GrayStone Automation"s Phalanx TFT hand-held touch screen remote control facilitates the operation of up to 8 networked Phalanx relay output tranceiver endpoints with each endpoint having up to 8 channels. Our remote control wireless products operate on a license free ISM band and utilize state-of-the-art HFSS technology to provide reliable, EMI resistance two-way communication between the remote control input and relay output transceivers with a range of up to 1000 feet clear line-of-sight.

Our Phalanx TFT remote control can be factory programmed for customized display features as required by the customer and are a cost effective choice for sustainable wireless remote control for network applications.

MONITOR COMMUNICATION INTERFACE BOX This communication interface box converts discrete input signals into communications for controlling any TFT RC electric monitor. The discrete input signals can be from a joystick, installer supplied toggle switches, relay contacts or canbus output module. The interface box accepts +12/24 VDC signals, but can be field changed to accept ground signals. This interface box also includes a relay to indicate when the monitor is in PARK position and has contacts that can be connected into the door open or Extend-A-Gun raised warning light. The interface box can be surface mounted. A 10" (3m) long 4-conductor cable for power and communication is supplied pre-connected. Also a 10" (3m) long cable is supplied pre-connected for connection to the input signals. This interface box is equipped with "last button pressed" software or can be configured as a "master" station.

TETHERED MONITOR OPERATOR STATION This operator station allows the electric monitor to be controlled from a handheld pendant. This operator station is supplied with a stainless steel mounting bracket to securely store the unit. The enclosure has an o-ring seal, liquid tight strain relief fitting with o-rings, and a membrane switch to keep water out. Any commands from this operator station will override commands made on the monitor control box. The pendant receptacle can be connected to the Panel Mount Operator Station or directly to the monitor through a customer supplied terminal block. A cable is supplied pre-connected to the panel-mounted receptacle and includes waterproof cap and chain. The Tethered Control Station is supplied with a 10" long pre-connected cable. This pendant plugs into a panel-mounted receptacle. This operator station is equipped with "last button pressed" software or can be configured as a "master" station. Mounting bracket meets NFPA 1901 9G force requirements which ensures the security of equipment and safety of personnel.

TETHERED MONITOR OPERATOR STATION WITH DISPLAY Allows RC monitors to be controlled from a handheld pendant and is supplied with a stainless steel mounting bracket to securely store the unit. The unit is easily configurable for multi-monitor control. This will allow a user to control up to ten TFT RC monitors from one operator station. This operator station includes a display for advanced system feedback and a backlit control panel for improved visibility of controls in low-light conditions. The enclosure has an O-ring seal, liquid tight strain relief fitting with O-rings, and a membrane switch to keep water out. The pendant receptacle can be connected to the Panel Mount Operator Station or directly to the monitor through a customer supplied terminal block. A cable is supplied pre-connected to the panel-mounted receptacle and includes waterproof cap and chain. The Tethered Control Station is supplied with a 10" long pre-connected cable that plugs into a panel-mounted receptacle. This operator station is equipped with "last button pressed" software or can be configured as a "master" station. Mounting bracket meets NFPA 1901 9G force requirements which ensures the security of equipment and safety of personnel.

MONITOR POSITION DISPLAY This display will show the stream position of any TFT RC electric monitor. Position is indicated by two sets of LEDs, one set for the vertical position and one set for the horizontal position. Buttons for the PARK & Oscillate features and HIGH/LOW speed selection are also supplied. A 10" (3m) long 4-conductor cable for power and communication is supplied pre-connected. When installed on systems w/RC Extend-A-Gun, the current state is indicated by LED (raised/lowered)

JOYSTICK MONITOR OPERATOR STATION This operator station allows any TFT RC electric monitor to be controlled using a joystick. Moving the joystick controls monitor vertical and horizontal movement. Thumb switches control nozzle pattern. A trigger built into the joystick handle can be used to open and close some water valves. The joystick is factory installed on an enclosure that houses the control electronics and a 10" (3m) cable is supplied with stripped wires for connection in the control system terminal box. The joystick control is also equipped with push buttons on top for PARK and OSCILLATE functions as well as monitor DEPLOY. An additional configurable button can be set up for RC Extend-A-Gun or LED light kit control. A toggle switch is available to select water valve open, close, or joystick control. The joystick control can be configured for proportional speed control of the horizontal and vertical axis. The joystick control is factory wired so that the AUX2 button on TFT monitor operator stations will also open and close the water valve. Mounting bracket meets NFPA 1901 9G force requirements which ensures the security of equipment and safety of personnel.

JOYSTICK MONITOR OPERATOR STATION WITH GATEABLE VALVE CONTROL Same as Y4E-JS-52 above but includes a valve opening adjustment slider to control the water flow, used with TFT gateable valve kit options.