can you repair lcd screen manufacturer

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The first thing you need to do when your LCD screen gets broken is to check your phone insurance. You’ll need to know whether it covers your cracked screens and the specific conditions that surround them. Doing this helps you make the most out of the money you paid for your phone insurance.

If the insurance covers the LCD screen, arranging for a repair will be straightforward. In a lot of situations, your main issue will involve going about your day without a phone. You can expect it to return within a few days.

Take note, you might still need to pay for the excess charges. The only time problems start is when you can’t get any replacement when your screen breaks. In that case, you’ll need to do the repairs on your own.

A good option while putting your cracked phone to the repair shop is to use an old phone. If you still have your old phone stashed away somewhere, it might be your best bet for now. Look at your drawers and check whether your old phones are still functional.

If your old phones aren’t there anymore, you still have friends and relatives. Ask them if they have gadgets they’re willing to lend. That way, you’ll have something to use while you decide what method to use to repair your cracked LCD screen.

In 2017 alone, around 5 million smartphone owners in the United States broke their phone screens. That shows how likely it is for you to break yours too. Accidents can happen even when people are careful.

It can get difficult, especially when the screen itself cracks instead of the glass cover. Repairing your screen will need you to take it apart using these steps:

Remove your battery cover as well as the battery and all the cards from the device. Once done, you can now unscrew the back of the device as well as remove the screws around the LCD. The screw types will depend on your phone brand and model, but the most common ones include T4, T6, or #00 Phillips screws.

Using a pry stick, take the housing off your device. Insert the stick between the two pieces of housing. Move it around the housing perimeter so the two pieces get disconnected.

Most devices have a cable that runs from the LCD to the control board. Disconnect the cable by lifting up on the connector. You also need to do the same on the cable that runs from the glass to the control board.

Try using a pry stick to remove the LCD from its own housing. Some devices might require you to remove the glass off first. If so, you need to use a heat gun on the glass for about half a minute to make the adhesive loose enough.

It’s important to remember that some devices like the iPhone combine the glass and the LCD together. That’s why it’s important to look at your replacement LCD and see if it also has the glass with it. If they’re connected, there’s no more need to pry them apart.

Put the replacement LCD in the housing of the cracked one. Once you’re finished, you can now reassemble the device. It’s easy as long as you reverse the steps you took when taking it apart.

There is always the option to send your phone to its manufacturer for the repair. But if you don’t want to pay a lot, you should try a local repair shop. The great thing is that it only takes a short Google search to find the ones near your area.

It’s always important to check the customer reviews before you commit your phone to an expert. Not all repair shops are the same. But if you find a skilled technician, you can rest easy since they can repair your screen fast.

In some scenarios, your phone will sustain irreparable damage alongside its LCD screens. You might think that it’s already worthless and hopeless. But the truth is that there are some websites out there that will pay for your broken device.

A good example is the shopping platform eBay. Some people buy broken phones since they want to salvage other parts to repair their own phone. It won’t net you a lot of money, but you can at least save some money when you need to buy new phones.

Some will also give you credit if you’re buying a used phone. Keep in mind that you might get a better deal if you take that instead of getting cash. But it’s only good if you’re buying a used device.

You have a lot of options if your phone’s LCD screen gets broken. No matter what you choose for your LCD phone screen repair, keep in mind that these options are always available for you. Look for the best option and commit to it as soon as you can.

Liquid crystal displays (LCDs) are the most widely used display technology. Their applications cover TV, mobile phone, appliances, automotive, smart home, industrial meters, consumer electronics, POS, marine, aerospace, military etc. LCD screen display problem can occur for several reasons.

Effect of environmental conditions on the LCD assembly. Environmental conditions include both the effects of temperature and humidity, and cyclic loading.

Effect of manufacturing process. With the development of LCD for more than 40 years and the modern manufacturing equipment, this kind if defects are getting rear.

Common failures seen in LCDs are a decrease in screen contrast, non-functioning pixels or the whole display, and broken glass. Different kinds of LCD display problem need to have different kinds of fix methods or make the decision not worthwhile to repair.

Broken glassIf you accidently drop the LCD and you find it broken on the surface but the display still works. You might just break the touch panel; you can find a repair house or find a youtube video to replace the touch panel. If you find the display not showing, especially you find the fluid leaking out. You need to reply the whole display modules.

Dim LCD displayLCD can’t emit light itself. It uses backlight. Normally, the backlight is not fully driven, you can increase the LED backlight to make a dim LCD display brighter. But if you LCD display has been used for a long time, it is possible that the LED backlight has to be the end of life (not brightness enough) if you turn on 100% backlight brightness. In that case to fix LCD screen, you have to find a way to change the backlight. For some display, it is an easy job but it can be difficult for other displays depending on the manufacturing process.

Image sticking (Ghosting)Sometimes, you will find the previous image still appearing at the background even if you change to another image. It is also called burn in. This kind of failure doesn’t need to repair by professionals. You can simply shut off the display overnight, this kind of problem will go away. Please do remember that displaying a static image for a long time should be avoided.

With the modern manufacturing process and design, this kind of failure rarely happens. Normally, it is caused by no power. Please check if the battery dead or adapter (power supply) failure or even check if you have plug in firmly or with the wrong power supply. 99% the display will be back on.

LCD has white screen – If a LCD has a white screen which means the backlight is good. Simply check your signal input sources which are the most causes. It can also be caused by the display totally damaged by ESD or excess heat, shock which make the LCD controller broken or the connection failure which has to be repaired by professionals.

Blur ImagesAs the LCD images are made of RGB pixels, the screen shouldn’t be blur like old CRT displays. If you do see blur images, they might be caused by two reasons. 1) LCD has certain response time, if you are playing games or watch fast action movies, some old LCD displays can have image delays. 2) The surface of the LCD is made of a layer of plastic film with maximum hardness of 3H. If you clean the surface often or use the wrong detergent or solvent which cause the surface damage. To fix damage on LED screen it’s need to be changed with professionals.

If you have any questions about Orient Display displays and touch panels. Please feel free to contact: Sales Inquiries, Customer Service or Technical Support.

However, if the digitizer or LCD is also damaged during a fall, that screen no longer carries value because it cannot be refurbished. Repair shops cannot sell broken LCDs to refurbishing companies; therefore, they cannot offset the cost of an LCD repair. That is why repair stores often charge a little extra if there is damage to the LCD or digitizer, to make up for that loss. Repair stores that don’t have an additional charge for an LCD repair typically inflate their glass repair price to make up for the loss from damaged LCDs. If they have one price, that means everyone is paying more to cover the cost of customers who have damaged LCDs and customers who only have cracked glass. This is why TCR separates the price of glass and LCD repairs for you! If you only have cracked glass, you only have to worry about paying to replace the cracked glass.

If your phone or tablet’s glass is shattered there will be cracks or chips on the screen itself. If it is just the glass that is damaged, the device may still function and you may be able to use it normally. If this is the case, it is likely that only the glass needs to be replaced. To prevent further damage to your device it is best to get it repaired quickly. For example, if liquids seep through the cracks it could cause permanent damage to the LCD.

Many people may continue to use their touchscreen with shattered glass and delay fixing the glass on their devices; however, if the touchscreen isn’t responsive, it could be a sign of more significant damage to the device’s digitizer which is integrated with the LCD screen.

A pixelated screen can indicate LCD damage. This would look like a patch of multicolored dots, a line or lines of discoloration, or a screen with rainbow colors. For many people, these colors are an easy way to know that their LCD is broken and that they should get it repaired.

Dropping your phone isn’t the only reason you’ll end up with a pixelated screen. Over time, your screen’s LCD may break down through regular use. This happens to other devices aside from your smartphone or tablet. Pixelation can happen to TVs and computers, too. People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.

A black screen or black spots on your smartphone or tablet is an indication of a damaged LCD. Often with a bad LCD, a phone may still turn on and make noises, but there is no clear picture. This does not necessarily mean any other part of the phone is damaged and a simple screen replacement will get it functioning again. Sometimes it can mean a battery or other internal component is damaged. It is best to have a highly qualified phone repair technician diagnose what is wrong so the appropriate repair can be made.

Fortunately, your mobile device is fixable whether you cracked the glass or damaged the LCD. Stop by or call TCR: Triangle Cellular Repair at (919) 263-2699 for a free diagnostic and quick, affordable cell phone repair in Chapel Hill and surrounding areas. We’re always happy to help!

At ACS, most monitors cost a fraction of what you would pay for a brand new one. You will be very satisfied with ACS Monitor Repair Services – Guaranteed!

LCD, CRT, Touch Screen, CNC, and many other monitors are expertly repaired and serviced. Video driver and controller repair, replacement of screens, back light assemblies, power supplies are just a few of the monitor services provided by ACS Industrial.

ACS also repairs Security Monitors, Hospital Monitors, Medical Monitors, Touch Screen Operator Control Stations, POS (Point of Sale) Terminals, and more...

Encoder, LCD, rotating equipment and vacuum pump repair services. Capabilities include rebuilding, testing, asset and inventory management, barcoding, troubleshooting, predictive and preventative maintenance, database management, engineering and reverse engineering. Entertainment, food and beverages, government, military, OEM, pharmaceuticals, steel, aerospace, agriculture, alternative energy, automotive, chemical, power generation, electronics and other industries served.

When your LCD display has broken, needs replaced or simply needs a technology upgrade, and you have design/equipment elements to consider, you will want to look for a replacement part instead of replacing the unit.Problems may arise when you are sourcing the new panel from your original manufacturer.For example, by the time your panel has degraded, your LCD may be end of life, making it difficult to source;original manufacturers may be charging premium prices for their replacementLCD parts.AGDisplays offers a drop in replacement service for customers who need to replace an LCD or LCD component when their original panel/part is unavailable;this service is also for customers who are looking for a cost effective, suitable replacement or upgrade to their existing LCD. AGDisplays offers availability of standard or custom high-quality LCDs of virtually all shapes and sizes.

Replacing or upgrading the LCD component of your equipment sounds intimidating. It is rather simple if you begin your search with AGDisplays. By simply providing us with your panel part number, general specifications (if possible) and any other upgrade requirements or desires that you might have, we source these products for you or we can source an equivalent replacement, as desired. Using a replacement LCD does not compromise on quality and compatibility;we ensure functionality and performance are top priority because we know how critical the LCD interface is for your application.

You may receive notifications from your original equipment manufacturer about your LCD panel. There are a couple of announcements to pay attention to. The most important two are the end of life (EOL) announcement and the end of sale date. The end of life announcement will officialize a future cease production date for the indicated part number. It may also indicate the end of sale date, which is the last date customers are able to order the product through the manufacturer. After this date, the product will no longer be for sale. Typically end of life announcements come six to twelve months before the last time buy date. A few months later is when your last time buy will ship.

If you decide by this point that your equipment is well suited to use the LCD replacement, you may want to grab these panels when they get into the last time buy phase. If you find yourself ready to upgrade after EOL and last time buys have passed, don’t fret.A drop in replacement unit extends the lifecycle of your unit in the case of EOL or unavailability of original parts. Products are matched for compatible integration without compromising quality. AGDisplays offers a full line of compatible replacement industrial LCD display systems. When your design requires an upgrade in features but you still want to retrofit the LCD into your existing equipment, AGDisplays works together with you, discussing requirements and performance options. Our experts have an eye on the safety and longevity of your electrical components. We source alternative panel with same specifications to replace the panel in your equipment. Our drop in replacement LCD displays are selected carefully, with safe and stable compatibility in mind.

At AGDisplays, we have global sources with preferential pricing from our vendors. We verify continuity of supply for steady demand so you are assured your products will be available when you need them. Our International Procurement Office in China verifies these resources and quality of the companies we do business with;we have a secure list of trusted vendors with whom we maintain current business practices. Samples are always tested and verified before placing large orders. Our competitively priced products are sourced in a timely and efficient manner, so your company never misses a deadline.

AGDisplays provides our customers with the opportunity to replace LCD or components so you can avoid having to spend big bucks to OEM companies. With AGDisplays, our customers receive unparalleled attention and support without the hefty price tag that you may get elsewhere.

There are many signs an LCD will give the user to indicate that it may be due for replacement or upgrade. Even users who are not LCD experts will be able to tell when it is time to replace.

Outwardly, your LCD will show physical signs of damage such as a cracked or scratched, foggy or contaminated screen.Mostly, these damages are quickly noticeable to the naked eye and the first obvious sign that your panel may need a replacement. These are clear indications that the outside of your LCD has been damaged and is in need of evaluation or replacement. The application environment will determine the urgency in which you’ll want to replace the LCD. Cracks in the LCD may leave the LCD vulnerable to contamination and dust, which in turn can extend damage and/or decrease visual readability of the display.

Most LED technology estimate LED lifetimes to be upwards of 100,000 hours of useful life. This works out to be about six hours of usage a day—and 45 years of service, whew! So one can assume that LCD components will fail before the LED backlighting system will degrade. However, degradation does happen with long term usage. If your LCD is looking less bright than it should be, it is possible that a component in the display’s backlighting system needs replaced or upgraded.

LCDs that are broken internally may only show a black screen, a white screen, or even show no data when turned on. Other indications will be white/grey/black discoloration spots (called mura) of the display itself when it is turned on, regardless of the data/color that is shown on screen.

Another indication of a dying LCD aredamaged pixels. If you notice a small speck of white or black on your screen that does not go away, even as the screen changes, you may have a damaged pixel or two. There are a few different types of pixel defects, hot, stuck and dead pixels. Hot pixels present themselves as always ‘on,’ they always appear white in color. Dead pixels are always ‘off,’ and look black at all times. Now a stuck pixel is either stuck ‘on’ or ‘off’ so they may appear the same as a hot or dead pixel. These (sometimes) are solved by switching from bright to dark colored screens quickly to unstick these. However, this isn’t a reliable treatment for stuck pixels.

If you’ve notice defective pixels on your LCD screen, do not panic! Some manufacturers have a standard in which it allows a certain amount of pixels in production. Overall, if the LCD in question has an increased rebellion of pixels, whether hot, dead or stuck, the LCD may be of low quality or the pixels are going bad.

Sometimes white, black or multi colored streaks appear running horizontally or vertically along the display. If this is happening on every screen, this is a likely sign that something is wrong inside the LCD.

Signs of LCD degradation include those missing pixels, the dimming of screen brightness over time, and even the loss of color and contrast in a display. If you need more assurance the LCD is the problem, consult AGDisplays to discuss our replacement options.

We are also a family owned and operated business out of Boca Raton, FL, and our business is refurbishing large volumes of salvageable combos (Cracked Glass Good LCD) such as the ones that you buy. We can give you a credit for each combo that we refurbish based on the units that you provide for us to work on. We have a very transparent process and would like the opportunity to serve you. We have the capacity to handle large volumes and would very much like to get in touch with you to discuss our capabilities and show you how we could improve the margins in your buyback business and possibly reduce your need for working capital. Please reply if interested so that we can set up a time to talk. I assure you that it will be a good use of your time.

Use our “Get an Estimate” tool to review potential costs if you get service directly from Apple. The prices shown here are only for screen repair. If your iPhone needs other service, you’ll pay additional costs.

If you go to another service provider, they can set their own fees, so ask them for an estimate. For service covered by AppleCare+, your fee per incident will be the same regardless of which service provider you choose.

Your country or region offers AppleCare+ for this product. Screen repair (front) is eligible for coverage with a fee by using an incident of accidental damage from handling that comes with your AppleCare+ plan.

The Apple Limited Warranty covers your iPhone and the Apple-branded accessories that come in the box with your product against manufacturing issues for one year from the date you bought them. Apple-branded accessories purchased separately are covered by the Apple Limited Warranty for Accessories. This includes adapters, spare cables, wireless chargers, or cases.

Depending on the issue, you might also have coverage with AppleCare+. Terms and Conditions apply, including fees. Feature availability and options may vary by country or region.

We guarantee our service, including replacement parts, for 90 days or the remaining term of your Apple warranty or AppleCare plan, whichever is longer. This is in addition to your rights provided by consumer law.

Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used genuine Apple parts that have been tested and pass Apple functional requirements.

You could almost see it happening in slow motion: your smartphone is in your hand one moment, and the next thing you know, it’s barreling toward the ground in a nosedive. Sometimes the layers of glass and plastic will hold up, but all too often, this scenario will lead to a chipped, cracked, or broken phone screen.

Thanks to the right-to-repair movement, the options for mending a broken phone screen have expanded. Between simple DIY fixes, third-party repair shops, and even manufacturer-sponsored mail-in programs, there’s an option for everyone.

It all boils down to a difficult-to-reach compromise between consumer desires and engineering reality. In other words, we want phones with maxed out displays that also feature an elegant design. However, those slim edges and nearly bezel-less screens have to make some concessions in the durability department.

But regardless of the design specifics, it’s really about elastic energy, according to Red Zombie, a Clearfield, Utah-based repairs and accessories shop.

“When you drop your phone, elastic energy stored in the phone’s glass is converted into surface energy, which is why your glass cracks,” the company notes in a September 2018 blog post. “[W]hen you drop your phone, the force of impact will overcome the surface compression, resulting in small stresses that could lead to the shattering of your screen.”

Broken screens come in various levels of severity—from light scratches, to spiderweb-like patterns, to entirely missing chunks of glass—and you could be dealing with anything from a completely shattered display and a broken phone, to a simple cosmetic issue.

First, you should assess the damage, which means getting your phone on a solid surface and under a good light, not just giving it a quick once-over before stuffing it back in your pocket. With a little bit of stress testing and careful prodding you should be able to work out whether the screen is about to fall off or fail completely. In a lot of cases it will stay in place, cracks and all, so you can at least keep tweeting, as long as the screen is still visible and functioning.

If the phone is seriously damaged, back up your data as quickly as you can, making sure all of your photos, videos, and important files are saved somewhere else just in case it dies completely and you can’t get the phone working again. If it’s already stopped functioning, then a professional repair is probably your best bet.

The name of the game here is, “hold out until I’m eligible for an upgrade.” If you want to keep using the cracked phone, and don’t want to risk losing glass or slicing up your fingers, cover the screen with a layer of packing tape. Line everything up carefully and trim it with an X-Acto knife, and it may look almostlike a real screen protector.

This is the gussied-up version of the packing tape solution. Using a screen protector ensures you have no seams and a clean line around the edges of the screen. Granted, that might not be much of a concern when there’s a spiderweb of cracks underneath.

It’s possible to replace a broken phone screen on your own. We’ll refer you to iFixit for their excellent, step-by-step guide with photos. A few key things to keep in mind here: Before you decide to go this route, look into the cost of a replacement screen. Today’s phone screens, which incorporate touch interaction and possibly biometric sensors, don’t come cheap.

You should also look into the warranty situation. If you’re the kind of person who is willing to fix a phone yourself, you’re probably not too worried about maintaining your warranty—but it still can’t hurt to know if you’re going to void it.

Finally, unless you’re already accomplished at repairing modern solid-state electronics, you probably lack the specialized tools you’ll need for the job. Luckily, iFixit sells a handy kit that includes pretty much everything you’ll need, with the possible exception of the iOpener, a tube you heat up and apply to the phone to soften its adhesives.

You can always just take your broken phone screen to a professional repair shop. If you’re an iPhone person, look for your local Apple Store here or consider trying out Apple’s mail-in repair program. Best Buy will work on iPhones and Samsung phones. And finally, UBreakIFix has more than 700 locations across the country.

Neoti certified technicians will repair or replace diodes, modules, shaders, receiving cards, hub boards, power supplies, and more. We approach each LED display screen repair with industry knowledge, skill, and experience. Our passionate, dedicated team commits their time and energy to solve any display problem that arises. We diagnose and develop the right course of action to restore your screen.

We also know that a damaged screen can impact your visitors’ experience or even delay an upcoming event. To help you move forward, we execute LED panel repairs quickly and efficiently. We complete repairs for various industries, such as broadcast, education, stadiums, and corporate organizations.

Affordable service contracts are available, so you can keep up with routine maintenance for your LED panels. We can also step in and perform repairs as needed.

Once you have found the correct part number, see HP Consumer Notebook PCs - Ordering HP certified replacement parts. Use the instructions in this document to order a replacement part.

HP recommends that you only order parts from an authorized HP repair parts dealer. Parts ordered from third-party companies might not perform as expected and might cause additional

Whether it"s cracked or has one too many blown pixels, a broken laptop display can stop you dead in your tracks. But with the right tools, a little technical know-how, and a bit of patience you can replace a damaged LCD.

I also suggest you watch my earlier video on what to know before trying to fix a smartphone or tablet. It"s not specifically about laptops, but the information is still relevant, and it will help you decide if you should repair the machine yourself or take it to a shop.

Lastly, understand that if you follow the instructions in this video, you do so at your own risk. Neither CNET nor any of its representatives can be held responsible for injury, damage, or loss of data.

To begin your fix, you"ll need a few simple tools and a replacement LCD screen. For tools, I recommend a screwdriver set with a variety of small bits, such as a Phillips #00 and a Torx T5. It"s also a good idea to have a few thin metal blades or plastic spudgers. These are really handy for removing the trim that surrounds the screen.

As for the replacement LCD, you should be able to buy one either from the laptop manufacturer"s authorized parts dealer or a third-party supplier. Depending on the screen, they usually cost between $50 and $250 dollars -- more if it"s a high-end display or if you buy an OEM replacement. Regardless, you"ll want to buy a new screen that matches your broken one exactly. The only sure way to do this is to remove the broken one.

After disconnecting the power supply and removing the battery, carefully examine the bezel around the screen. You"ll need to remove this bezel to access the screws that hold the LCD panel in place.

Note: Your laptop may not have cushions or hidden screws. The bezel may simply snap onto the lid or be held in place with double-sided tape. Just adapt my instructions to fit your specific laptop.

With the LCD"s mounting brackets exposed, you can remove the screws that secure it to the lid. Then rest the display front-side-down on the case and disconnect its cable.

If your laptop was made before 2010 and has a LCD with fluorescent backlights, it will likely have two cables. But as this is an LED-backlit LCD, it only has one.

Now, locate the manufacturer"s label and note the model number. Using this information you should be able to buy an exact match for your broken screen.

If the dimensions, mounting brackets, and connector all match, you"re ready to install the screen. Connect the new panel to the cable, position the panel in the lid, and secure it using the appropriate screws.

Before reattaching the bezel, it"s a good idea to test the new panel. Reconnect the battery and power cable and turn the machine on. If the display works, you can reattach the bezel and any external screws and rubber cushions. The repair is now complete.

I investigated my landline phone to repare its LCD according to this good tutorial, unfortunatly I found the cutted connection is not on the main PCB board but on the flat connector itself... and any heat applied (soldering tentative...) to the flat is going do destroid it completly ((

Instead of hot-air gun use hot melt adhesive (https://en.wikipedia.org/wiki/Hot-melt_adhesive) gun. Just use its hot spike, and you will be able to point precisely to the place you need a heat.0

I had a Natwest Card reader, where the screen was illegible and using this tip with my wife"s hairdryer I got the card reader operational, many thanks !!!0

Many thanks for sharing the information on how to fix these displays! Worked out perfectly on a asus lcd poster from ages back which gave no screen at all and are not sold anymore to replace.ReplyUpvote

Very good interesting piece. I am no way shape or form of an electronics junkie , but i am more like a jack of all trades and a master of none type. I have a dual power TS-100 hand held calculator where the second digit was pixelated I would say. I googled how to repair it and seen your story. I took my calculator apart and the back side is where that glue strip is at. I could not find my heat gun, thanks to having to move it for the Christmas tree setup. I used my Kitchen Propane stove front burner and waived it over it a few times. It took a few tries but I finally was able to get the dead pixel back. One good thing is the calculator was on so in between heat ups and eraser rubbings I could see my progress and man your fix really worked. Thanks fro the story. My favorite pocket calculator is fixed once again. I wish I would have taken before and after photos, but was too giddy to try your repair idea.0

Google offers no link as to how to open an AEG Voxtel D235 handset. After opening the battery compartment and removing batteries and the two Philips screws at the bottom, the upper half refuses to budge. Is there a method for opening the upper part, to access the LCD screen connector for repair? Any suggestions appreciated.0

I just got my CM921 to work - so, carefully unplug or remove the lcd unit from the circuit board (8 pins i think) then separate the white board (same size as the lcd) from the back of the lcd display (it was glued on one side and i used a scalpel) the lcd will then flip over and you can see the ribbon, then follow the instructions above, return the lcd back down on top of the little white board as before and plug it back in...0

There may be a thin conductive rubber strip between the glass of the display & the board it is attached to. Over time this rubber can leak an insulating compound onto the interface connection that can, at times, be removed by removing the strip and gently rubbing it with a clean soft eraser. Be gentle as it can be fragile & easily damaged. This was an effective repair in the early days of these displays.0

In order to remove the touch screen glass, you have to first heat the screen for 2 to 3 minutes with a hairdryer (focusing on the edges, as seen in red in the first photo).

If you are reading this, you may have accidentally or intentionally damaged the screen of your TV (LCD, LED, Plasma). Now if you are looking for a solution to fix this problem, check out our recommendations:

First: If your TV does not have a cracked screen and the problem has just appeared on its own, you may be able to fall back on the TV manufacturer’s warranty.If your TV screen has developedblackspots,vertical lines,small dots, unusuallybright pixels,fading, distortedshading, orcolor issues, you may be able to use the warranty. Be sure to have your purchase receipt, and take note of the model number and serial number on the back of your TV. In case that your warranty has expired, you might contact us with any questions related to your TV repairs.

Second: If your flat-screen; TV has the dreaded vertical lines, half of the screen has turned darker, the screen is cracked, or the screen is broken, this can be repairedbut may cost more than you paid for the complete TV. If your screen is cracked or broken, you can try replacing the screen, LCD, Plasma, or LED part.

Conclusion: If your TV screen is cracked and damaged, it is mean that you have damaged the LCD, LED or Plasma display. If this is your case, we, at the Nerd Repair Center do not recommend fixing the broken/cracked screen because it will cost you more to repair your TV than to replace it with a new one.  I know this is no the answer you were looking to hear, unfortunately, this way we will save you a lot of time and money in the process. please note that this is the nerd repair center professional recommendation based on years of tv repair service experience.