s3c6410 arm11 lcd module supplier

Core6410 processor card is designed specially to be the heart of your next embedded design. The tiny board integrates Samsung S3C6410 processor (ARM1176JZF-S, up to 800MHz). The processor card takes use of all common features of S3C6410 and the interface between the processor card and your carrierboard is through 170-pin expansion interfaces(QFP package). The Net and audio chip is integrated into the core board. The Audio, Net, USB, LCD, I/O and all other hardware interfaces are all expanded via these interfaces.

Integration of the CoreWind Core6410 processor card to customer special design is fully supported by CoreWind technologies. CoreWind also designed an expansion board which can fully evaluate Core6410. The whole system is called Real6410. CoreWind offers Linux 2.6.28, WinCE6.0, Android2.1 BSP for this board. Customers can leverage our experience to increase your own productivity. The optimal embedded microprocessor solution provides users with a flexible development environment based on S3C6410 and a shortened development timeframe.

* The modular is led out most signals of ARM11 S3C6410, such as Camera, I2C, 16bit BUS, UART, LCD, Touch Screen, USB OTG, USB HOST, Matrix Keypad, ADC, DAC, SPI, SDIO, AC97, EXT INT, GPIO and so on.

Q. How to configure the kernel support for different size of the LCD screen? For WinCE, users only need to choose according to their own LCD screen display resolution modify the macro definition of different screen in the file "bsp_cfg.h" under the directory "\SRC\INC".

For Linux QT, execute the command "make menuconfig", then setting according to the following directory "Device Drivers -> Graphics support -> Support for frame buffer devices", select the corresponding LCD screen LCD Type. Detailed methodology please refer to the corresponding user manual.

For Android, if you are switching between resistive screen, you can modify the parameters of LCD in the bootargs under the uboot environment variable. If you are switching between the resistive and capacitive touch panel screen, you need to execute "make menuconfig" in the kernel, then setting according to the following directory "Device Drivers -> Input device support -> Touchscreens", select the appropriate option to configure.

All of these, has made great convenience for the developers to evaluate and use, plus the 4.3 “LCD module which we customised according to the size of Mini6410, truly allows you to” All in one hand”!

Parts of product, like core module, SBC, stamp, daughter card, single board(without LCD), motherboard, baseboard, LCD, sell seperately, email us for quatation.