blue backlight lcd module 24064 quotation

NHD-24064WG-ATMI-VZ# | Monochrome Graphic Module | 240x64 Pixels | Transmissive LCD | Side White Backlight | STN (-) Negative Blue Display | Built-in Negative Voltage Supply

Newhaven 240x64 graphic Liquid Crystal Display module shows white pixels on a blue background. This transmissive LCD Display requires a backlight for visibility and offers a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-24064WG-ATMI-VZ# display includes built-in negative voltage supply It has an optimal view of 6:00, operates at 5V supply voltage and is RoHS compliant.

ERM24064FS-1 is white background with 240x64 monochrome black pixels,Raio RA6963 controller (fully compatible with Toshiba T6963) that is extremely common and well documented,8080 8-bit parallel interface,single led backlight with white color included can be dimmed easily with a resistor or PWM,fstn-lcd positive,wide operating temperature range and wide view angle,high contrast,rohs compliant,optional pin header.Toshiba T6963 has been assigned to End-of-Life,we use Raio RA6963 as the replacement that is fully compatible with Toshiba T6963.

Our 64240C is a COG LCD that uses two chips of the Sitronix ST7565P in master/ slave mode. This display module has been used in audio and medical equipment, alike. The most popular combinations for this module use our white or RGB backlight. This LCD has a FPC interface.

ST7565P is a single-chip dot-matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or serial display data sent from the microprocessor is stored in the internal Display Data RAM and this chip generates LCD driving signals independent of the microprocessor. Each data bits (65x132) of the internal Display Data RAM is 1-to-1 correspondence with each pixels (65x132) on the LCD panel, therefore, ST7565P enables displays with a high degree of freedom.

- Package Contains: 16x2 Blue LCD, I2c Module (without Soldering) For Arduino UNO R3, Mega 2560, Nano Operate with 5v dc, you can connect directly to arduino board

We are instrumental in manufacturing and supplying a broad gamut of LCD Module. These modules are designed and developed by our experienced professionals from quality tested material. Offered products are appreciated for their high performance, clarity, compact design, less maintenance and longer service life. Raw material usedread more...

The table below lists ASI Display"s standard LCD character modules. Datasheets are provided in PDF format for each of the modules without backlighting (reflective), with EL backlight, and with LED backlight. Photos of various LCD color and backlight combinations can be viewed here. Many other combinations are offered. Contact your local sales office for availability.read more...