cleaning a lcd screen free sample

When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.

To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.

You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.

Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.

The television screen is what everyone sees first, but don’t forget these other key areas, not to mention the area around your unit. “It can also help to clean the furniture and carpets around the TV to prevent dust and hair from getting into it,” says Williams.

The remote control is handled regularly. This is the one time when harsh chemicals can be used sparingly. Follow the manufacturer owner’s manual instructions first, but if sanitizing is needed, use a cleaner that’s at least 70 percent alcohol, according to the Centers for Disease Control (CDC) recommendations. (Basic drugstore isopropyl alcohol works well for this.)

Start the remote control cleaning by removing the batteries. As with the TV screen recommendations, you’ll want to avoid spraying directly onto the surface, as this could cause the device to malfunction. Dampen a clean microfiber cloth and rub gently on the top and the underside of the remote control. For hard-to-reach gunk that’s jammed between the buttons, try a cotton swab dipped in a small amount of the cleaning solution. Make sure to let it dry thoroughly before replacing the batteries and using it again.

When figuring out how to clean a TV screen, selecting the safest cleaning solution is key, but it’s also important to know what cleaning products to avoid. Keep in mind that not only should you skip cleaning with certain products, you should also avoid spraying them in close proximity to the TV.

Both Panasonic and Samsung both have lengthy “avoid” lists that include harsh chemicals such as wax, cleaning fluid, acetone, benzene, alcohol, thinner, mosquito repellent and insect spray (really!), lubricant, solvent and undiluted mild dish soap. These can, as Williams says, “cause clouding and can wear away your TV’s anti-glare coating.”

In terms of what to use, Samsung recommends “monitor cleaner only” (also called TV screen cleaner). Panasonic suggests “one part mild liquid dish soap diluted by 100 times the amount of water.” To make this cleaning solution, add a scant teaspoon of liquid dish soap to two cups of water, stirring well to dissolve.

Williams likes TV cleaning kits for their ease of use. “A TV kit will be your safest option for cleaning a TV,” he says. “These kits will come with everything you need to get your TV looking new, like screen-cleaning solvent and a fast-drying microfiber cloth.” You can find TV cleaning kits and cleaning products designed for flat-screen TVs at electronics stores or on Amazon.

Some people swear that only distilled water is useful as cleaning spray for their delicate electronics. Although Williams does not necessarily recommend using distilled water, if you know for a fact you have hard water in your area, you may want to try the distilled water route and see if you notice a difference. Hard water, which has high levels of calcium and magnesium, may leave a film or residue when it’s used for cleaning. Before you spray water to clean TV screens, try experimenting with tap water on a less-important screen, like an old cell phone, to assess the results.

If you can picture the hulking tube TVs (also known as CRTVs) of yore, you may also remember how delightfully easy they were to clean—a few spritzes of window cleaner and some wipes with paper towels and you were good to go—no special microfiber cloth required. But modern TVs with fancier technologies like LCD, OLED, and plasma call for gentler techniques. “Avoid using chemicals like alcohol, ammonia or acetones when cleaning your TV. These cleaners were safe to use for previous generations of TVs with glass panels, but as the hardware changes with time, the cleaning methods do too,” says Williams. Since some multi-purpose and glass cleaners are made with ammonia, skip the Windex.

Modern TVs are often smart TVs but the cleaning tips are the same as the ones for LCD, OLED and plasma TVs. The microfiber cloth is your TV screen’s best friend. “The majority of TVs you purchase today will be smart TVs, and the cleaning process is the same as TVs without smart capabilities,” Williams says.

Before you give into your impulses and wipe your screen with whatever you have at hand, let us stop you right there. Your display is way more delicate than you think, and if you want it to last a long time in optimal conditions, you’ll need to treat it with proper love and care.

The good news is that cleaning a computer screen is more simple than you think. You only need a soft cloth, a tiny bit of water, and the most delicate of touches.

As you would expect, not all screens are created equal, and some are more delicate than others. The safest way to figure out the proper care for your screen is to search for the make and model of your device, find out if it has an LCD, LED, or some other type of display, and search for the manufacturer’s instructions on how to care for it.

If you want to skip all that, there’s an easy way to avoid making a mistake that might not only result in irreparable damage to your screen but to your entire device. According to Joe Silverman, owner of New York Computer Help, a tech repair center in New York City, no matter how much money you spent on your computer or tablet, it probably has an LED or an LCD screen if you bought it within the last three years—and neither type benefits from window cleaner or highly concentrated alcohol.

That’s the uppermost layer of your screen, which is extremely sensitive to the acidity in alcohol and in compounds like ammonia or propylene glycol. These are often present in cleaning agents such as window cleaners and degreasers. Using these liquids will corrode the surface of your screen, resulting in scratches or even smudges you won’t be able to get rid of.

“Underneath there it’s the most intelligent part of the laptop,” Silverman explains. “What happens is that the liquid will get through that first line of defense, and when it does that it’s going to really affect the sensors.”

Things get even trickier when you’re dealing with touchscreens. On models like the Microsoft Surface, the display is the main input—as opposed to your mouse or trackpad on a regular laptop—so it’s ultra-sensitive, Silverman says. Using a strong liquid cleaner like a degreaser or a bleach-based disinfectant can obliterate the top layer on the screen. Combine that with high pressure, and you can kiss your fancy touchscreen computer goodbye.

Another downside to newer computers is their size and weight. If you decided to splurge on a new laptop, for example, you probably found one that has top-notch components, but also a slick, lightweight design. This format is only possible if everything in your laptop is smaller and thinner. In the case of your display, a thinner screen means a weaker barrier between your computer’s guts and the elements in the outside world.

Caring for your screen is simple—it only takes a little bit of water and a dust-free cloth, such as a microfiber wipe or the piece of fabric that came with your glasses.

First, turn off your computer and disconnect the charger. This might sound paranoid, but the benefit is twofold—you avoid any chance of triggering an electrical surge, and your screen will remain black, which will make it easier to see any dirt and grime.

Pour a couple drops of water on your cloth. Forget paper towels or the sleeve of that soft cotton t-shirt you love—microfiber is your best bet. Still, no matter how soft it is, a dry wipe could always leave micro-abrasions on your screen. The moisture will also help gather dust and particles while lifting grease from your display.

Use circular motions starting in the center of your screen and moving outward, so you don’t leave any streaks. If you can see any droplets or water traces on the glass while you clean, you’ve used way too much water. Gently dab the residual H2O with an absorbent cloth or tissue paper and start again.

If you’re dealing with next-level gunk, you can use isopropyl alcohol at 70 percent or lower, Silverman says. “That percentage is very important,” he explains. “We’d only use 90 percent or higher on dummy parts that don’t have sensors, like top cases and keyboards.” In these extreme cases, spray the alcohol on the cloth, never directly on the screen, and wipe it gently.

Just like solar damage, screen damage is cumulative. The more pressure you apply, the more abrasive a product you use, and the more often you use it, the greater the damage you’re inflicting on the protective layer of your display and the delicate sensors underneath it.

Maybe you can get away with using a high percentage of alcohol or even a window cleaner on your computer screen once or twice. But if you keep at it, eventually you’ll see the deleterious effects.

“You’ll see discoloration, lines (vertical and horizontal); sometimes it looks pretty and rainbow-like,” Silverman says. “Sometimes it’ll blink and sometimes you’ll see droplets of water or liquid in the back of the screen. There’s a lot of ways in which damage appears.”

The best way to avoid damaging your screen while cleaning it is to simply keep it from getting dirty in the first place. If you have a laptop, cover the keyboard with a thin microfiber cloth before closing it to prevent finger grease from transferring to the screen. If you have a touchscreen, wash your hands often before you use it, but make sure you let your hands dry completely before you start tapping—the soapy water or liquid hand cleanser from your fingers can easily end up on the screen and corrode it.

Wet, newly washed hands can also be detrimental to regular computers. Silverman says he often sees such victims in his shop—computers completely dead after hand sanitizer rubbed off the owner’s hands, seeped through the keyboard, and ruined the inner guts of the machine.

Your phone was designed to be carried, dropped, tapped, swiped, smashed against your face for long periods of time, and stowed in the deepest corners of your bag. In other words, its screen is way more resilient than your computer’s.

Silverman explains that most iPhones and Samsung phones, for example, have screens made out of one thick piece of glass. These, as opposed to computer screens, have all the LCD layers fused together, making them much more difficult to damage. Still, if you’re using alcohol, he recommends keeping the concentration at 70 percent or lower, using a soft cloth, and applying only low pressure to get rid of any accumulated gunk there.

Be especially careful with charging ports, as contact with water (also present in rubbing alcohol) can damage the electronics inside your smartphone. Newer models often are resistant to liquids, but there’s always a threshold to how much they can withstand. And you probably don’t want to know what that is.

Replacing the screen of your computer or smartphone can be expensive, and even if that’s not an issue for you, no one wants their devices to fail when they need them the most. So remember these tips well—we hope you never have to read this article again.

We"ve all had that moment: You"re sitting at your computer or laptop and the light hits your screen in a way to reveal an unsightly accumulation of streaks, fingerprints, and dust.

To help, we round up the most important things to know about cleaning your computer screen, whether it"s a Mac or PC. While it"s a simple process, there are a few important rules to keep in mind to make sure you"re doing it safely.

Computer screens are not all made the same, and thus can"t all be cleaned the same way. You"ll want to be careful no matter your screen type, but it"s helpful to know that displays come in two categories:Glass-coated screens: The screens on newer iMac displays and MacBooks have a glass overlay. Glass displays are a little less delicate than LCD or LED screens, and mild cleaning solutions, like rubbing alcohol, are generally safe to use on them.

LCD or LED screens:Windows computers and most touchscreens and matte displays are typically not coated in glass. Extra care should be taken with these screens so not to damage the pixels that make up the display.

Since there are so many computers, laptops, and monitors out there, each with their own set of variables and specificities, it"s smart to just simply err on the side of caution.

To clean a computer screen, you really just need two things: A microfiber cloth and filtered or distilled water. That"s to say you don"t need a special store-bought cleaning solution.

If you"d like some extra sanitation power, an equal parts mixture of water and vinegar is safe no matter your screen type. If you know that your display is glass-coated, you can also use an equal parts mixture of water and 70% rubbing alcohol.What you needTwo lint-free microfiber cloths

d3sign/Getty ImagesTurn the computer or laptop off.For safety reasons, begin by letting the device cool down completely. Dust, fingerprints, and smudges are also easier to spot on a black screen.

Wipe off dust with a dry cloth. Use a dry, lint-free microfiber cloth to gently wipe away any visible dust and dirt. If necessary, apply gentle pressure to remove surface-level smudges.

If any marks remain, wipe with a lightly moistened cloth.For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.

Buff with a dry cloth and air-dry.If any streaks remain once the screen dries, gently buff them with the dry cloth. Before you turn your computer or laptop back on, allow the screen to dry completely.Note:Apple claims that you can use 70% isopropyl disinfecting wipes to clean any Apple product. Just remember not to get any liquid into the device"s ports or openings — to avoid this, you might want to wring out the wipe to remove any excess liquid before using it.

For the best advice for cleaning your screen, it"s a smart idea to check your owner"s manual, which provides the manufacturer"s specific recommendations. But since screens are especially susceptible to damage, there are a few general guidelines that apply, no matter the type of screen you own.

Turn off your computer before cleaning the screen. This is just safe practice where any amount of liquid is involved, but more specifically, any static on the screen could create a shock and damage the internal components.

Do not use abrasive cleaning solutions. This includes bleach (or any products containing bleach), hydrogen peroxide, or all-purpose spray cleaners. Using an abrasive cleaner can ruin the finish of your screen.

Use filtered or distilled water. Especially in areas with hard water, water containing minerals like calcium and magnesium can damage your screen or leave even more streaks.

Use only soft microfiber cloths.Even a fabric as soft as a cotton shirt has snags and uneven particles that can scratch a computer screen. For this reason, avoid T-shirts, towels, and paper towels. The exception is the Apple Pro Display XDR or iMac, which requires a special polishing cloth.

Never spray cleaning solution directly onto the screen. To avoid any risk of damage from excess moisture, mist the solution directly onto the microfiber cloth instead.

Do not wipe in circles. Wiping in circles can create uneven pressure and ultimately lead to screen damage. It"s also more likely to create streaking. Wipe in tight, Z-shaped motions, or in broad strokes from side to side.

Do not scrub.Apply gentle pressure only. Hard scrubbing can damage the internal components of the screen and could leave scratches or spots of discoloration or dead pixels that won"t go away.Melanie Weir

Melanie Weir is a freelance author for Insider, mainly focusing on the Tech Reference section, but occasionally contributing to Lifestyle and Entertainment topics as well. She is also a freelance writer for ScreenRant, and is the Lead Weekend News Editor at TheThings.com. In her spare time she writes plays for both stage and screen. She can be reached at melanie.weir1008@gmail.com, or through LinkedIn.

As the weather warms, it"s time for everyone"s "favorite" pastime: spring cleaning. While you"re dusting off the shelves and shoveling out a winter"s worth of detritus, spare a moment to check your TV. Dust and grime can accumulate there, and over time it can become more and more noticeable. And if you have children, there may be an array of fingerprints and other smears on the screen.

The short version? Don"t use liquids, don"t press too hard, don"t use any traditional cleaners. Microfiber cloths are good, but be gentle. Modern TVs are predominantly plastic and therefore far easier to scratch than windows or your phone.

Want the longer version? Here"s what the top TV manufacturers say about cleaning their screens:Cleaning your 4K, OLED, or LED TV screen with a soft, dry cloth is recommended. The goal here is to avoid scratching the screen. Gentle, circular motions tend to give better results, since the circular motion hits each area from several angles in a single swipe.

Caution: Don"t spray water or other liquids directly on the TV, as electric shock could occur.Turn the TV off and let it cool down for a few minutes before unplugging it.

To clean the frame and screen, gently wipe it with a microfiber cleaning cloth. Make sure to wipe the TV frame and screen as gently as possible. TV screens are fragile and can be damaged when pressed too hard.

Important: Never use any type of window cleaner, soap, scouring powder, wax, or any cleanser with solvents such as alcohol, benzene, ammonia, or acetone. Never use abrasive pads or paper towels. If you do, you can scratch the screen or strip the anti-glare coating off the screen and cause permanent damage. Never spray water directly onto the TV. Make sure to wipe the TV as gently as possible. TV screens are fragile and can be damaged when pressed too hard.Gently wipe the screen or the exterior with a dry, soft cloth, such as an eyeglass cleaner.

For inks from oil markers on the screen, soak a cloth in a non-soap synthetic cleanser diluted (by less than 1% ) with water. Squeeze the cloth tightly to eliminate excess liquid, then wipe gently to remove the ink. Use non-soap cleansers cautiously because it may cause environmental problems when disposed improperly.

So why not Windex? Regular Windex is formulated for glass windows, plus a few other surfaces. It contains ammonia and alcohol, not the friendliest of chemicals. S. C. Johnson doesn"t explicitly say not to use Windex on TVs, but it offers Windex Electronics wipes and cleaners, so infer what you will. The better screen cleaners will clearly state that they do not contain alcohol or ammonia.

At last count, I found a billion companies making TV screen cleaners. Almost all of these are something like 99 percent water, 1 percent other stuff. Years ago I tested a handful and found them, on average, to work well enough. If you don"t have luck with a simple cloth and possibly distilled water, a screen cleaner is worth a try, and as a bonus you can also use it for your laptop, tablet and cell phone screens. Plus, they come with a microfiber cloth. If they don"t clearly state they don"t contain alcohol and ammonia, however, I would skip them.

So yeah, cleaning your TV is a good idea. But just remember that they"re exceptionally fragile. Why risk marring their surface by using cleaning methods the companies themselves don"t advise? If you damage your screen with cleaners, you won"t be able to fix it.

My advice? Get a nice microfiber cloth (if your TV didn"t come with one), and use that. If that doesn"t fix your smudges, try a cloth moist with water. Don"t press too hard. There"s less than a millimeter between your finger and a broken TV.

Screen cleaning kits are fine, though most people won"t need them. Remember, like all TV accessories, the store is selling them because they probably make more profit on that $20 kit than on a $500 TV.

As well as covering TV and other display tech, Geoff does photo tours of cool museums and locations around the world, including nuclear submarines, massive aircraft carriers, medieval castles, epic 10,000 mile road trips, and more. Check out Tech Treks for all his tours and adventures.

He wrote a bestselling sci-fi novel about city-size submarines, along with a sequel. You can follow his adventures on Instagram and his YouTube channel.

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

Can you read this line? Or is there a splash from a sneeze, or a greasy fingermark in the way? Perhaps another portion of your screen is dirty. The chances are that you don"t clean your screen often enough. In fact, we"re willing to bet that you"ve been putting it off for a while…

Cleaning a computer screen isn"t as difficult as you might think it is. Here"s what you need to know about how to clean your display, what to use, and cleaning it safely.

Splashes can obscure what you see on the screen. Smudges and greasy fingerprints accumulate over time to leave you with a dirty screen; dust gathers. The result is a viewing experience that is diminished by the presence of dirt.

It doesn"t have to be this way. Cleaning your computer or laptop display is remarkably simple. What"s more, it only takes a few minutes. When you"re done, you"ll have a shiny new display as good as the day you bought it.

Don"t have these things to hand? Don"t worry---you can also clean your computer screen with standard household products. Start off by making your own screen cleaner, using isopropyl (rubbing alcohol) or white vinegar, and distilled water.

You"ll also need a suitable microfiber cloth substitute. The idea here is to avoid anything likely to scratch your display. So, avoid paper towels, anything used for washing dishes, and facial wipes. Instead, opt for a cotton t-shirt, or handkerchief. A soft cotton tea towel is also a safe alternative.

Drips from the fluid can run into the bezel of the display, causing problems with the electrics. On a laptop, the spray can end up in vents and the keyboard, as well as running into the bezel.

With the cloth in hand, clean the display making small circular motions, avoiding unnecessary pressure. Start in the top left corner, and work across, then start another row. If some dirt seems tough to shift, repeat the process, focusing on that area.

Cathode Ray Tube (CRT) monitors are rare these days, but they can still be found in retro gaming systems. You might even own an arcade machine with a CRT display, or simply own an old CRT TV that you still use.

Next, spray the screen cleaning fluid onto the lint-free cloth, wiping the display in straight lines. Don"t worry if the cloth dries out---simply apply another few squirts of cleaning fluid.

These devices attract more grease and dust than static LCD displays. As such, you"ll need to clean them in a slightly different way. Hybrid device touchscreen displays are cleaned in much the same way as standard tablets and smartphones.

The main aim here is to remove the grease, then clean the screen of other dirt and detritus. Our guide to safely cleaning a tablet or smartphone display will help you here.

Meanwhile, if you own a CRT, follow the same steps, but remember that you can use glass cleaner. The case and display should also be cleaned with an anti-static cloth.

Finally, if you use a hybrid or touchscreen laptop, you"ll need to be more aware of the problems with grease. Our dedicated tutorial, linked to above, will help you out here.

Once your greasy, dirty screen is cleaned up, you might feel ready to start using your computer again. But you shouldn"t stop there. It"s time to completely clean your computer. Using a notebook? Here"s how to clean your laptop and keyboard.

Perhaps you’ve noticed that cleaning a display screen is not always as easy you’d assume. You’ve tried damping a paper towel with tap water and brushing it across your screen, only to be left with smudges, smears, and a few stubborn globs. Don’t worry… you’re not alone. This seems to be a common experience for the ever-growing number of digital device owners.

We would like to go over the proper cleaning methods so that you understand what works (and what doesn’t), and so you can relay that information to whoever might find it useful – whether that be you, your customers, your employees, or your father-in-law who just discovered the brand new world of handheld digital devices. The processes discussed here are helpful for nearly all displays, including touch screens and those with cover lenses.

Let’s go over the items you’ll need in order to clean your LCD screen. Be sure you have some kind of microfiber cloth and a cleaning solvent of some kind. As mentioned, you may already be well aware that the paper towel method isn’t effective, and that it can even cause scratches. This is why a soft cloth (or a microfiber cloth) will be a much better tool for cleaning. It is softer and does not leave particles behind that break away from the cloth, much like a paper towel does. If a dry cloth alone is not enough to get your screen up to standards, then you may want to apply the cleaning solvent.

Of course, not all solvents are created equal. Some of them work better than others for certain applications. Depending on the type of LCD display you have, you will want to do your due diligence. Many people will use distilled water as a solvent, as it has been known to be the least damaging to LCD screens. Granted, you can’t just poor it on there all willy-nilly. You don’t want to risk damaging any of the electrical components within the device.

You also should be cautious about using alcohol or ammonia based solvents, as they are capable of causing long-term damage to LCD screens, making the screen brittle and susceptible to cracking. They have also been known to cause discoloration issues. For best results, you should search for an LCD-safe solution. This, plus using the proper methods, will be the best for your LCD screen’s longevity. Here is a table that you can refer to in your search for an acceptable solvent:

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

LCD Displays are interfaces of human and machine. They expose to various environments, especially now that COVID-19 spreading around the world. So it"s impossible to keep a screen clean all the time. When you are going to clean an LCD display，do you have the right steps in mind？Maybe what you"ve been doing is not right！

LCD screens could have different top layers. For example, there are glass, plastic, coating, or protective bezels. Each one of them is different. Therefore, each type of screen should not be cleaned in only one way. In fact, the most appropriate way is written in product manual. Take Topway HMT070ETD-1D, a 7 inch Smart TFT LCD Display with capacitive touch screen, as an example. Cleaning precautions are as follow: Only clean LCD with a soft dry cloth. Isopropyl Alcohol or Ethyl Alcohol. Other solutions(e. g. water) may damage the LCD.

LCD screens are fragile. Before cleaning an LCD display, you should turn it off completely, disconnect it from power supply,  and let it cool down for a few minutes. This will eliminate danger of electrocution and make it easier to see dust on screen.

Don’t press down hard while cleaning, because that action may damage top layers or coating. Spray a little cleaning solution, such as isopropyl alcohol diluted with either pure or distilled water, onto a microfiber cloth and gently wipe the display in either an up and down or side to side motion. Too much pressure can compromise limited durability of even the most rugged LCD screens.

There are a few types of cloth can be used. Microfiber is recommended. It is lightweight and soft, seldom produces loose fiber. Because of an intricate way in which minuscule fibers are intertwined, microfiber is able to remove large amounts of dirt and dust without leaving streaks or lint. You can also use a cotton cloth if you don’t have a microfiber one on hand.

It is dangerous that an LCD display directly contacts with any liquids (especially when they’re still plugged in). A safer and smarter approach is to first wipe the screen with a dry cloth, then spray a small amount of cleaning solution onto another cloth and wipe gently. After that, wipe with another clean, dry cloth to remove the residual liquid.

Never use ammonia or rubbing alcohol based cleaners on LCD screens. They will damage the extremely delicate coating on top of screens, and negatively alter viewing experience, especially in strong sunlight.

Dust in gaps where bezels and top layers meet can cause internal damage to LCD displays. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can be helpful.

Now you know how to clean an LCD screen safely and correctly, if you find it helpful, please share this article with your friends. If there are more questions about LCD displays, please feel free to leave us a message.

One of the most common questions I am asked, now that LCDs are in wide use, is how to clean one.  Every manufacturer has their recommended method.  What Envision recommends will ruin an NEC LCD and void your warranty.  As you will be able to tell, every LCD needs to be cleaned in a different way.

Another thing I learned from finding all this information is that every manufacturer has the same warning: Never touch or press on the LCD screen with your fingers – NEVER!!!  Doing so can cause the pixels to short out and die.  Then you will have blank spots on your LCD.

Here is the cleaning information I have gathered from various manufacturer’s web sites.  The text is taken verbatim from the manufacturer’s websites, “read-me” files, PDFs, and e-mails.

I called CTX tech support and was told the way to clean their LCDs was in the Technical Glossary and General FAQ.  I asked the guy to check that out and he said he couldn’t find it either.  He said to use very mild soap, tepid or lukewarm water, and a just slightly moist lint-free cloth.  This is supposed to be added to their General FAQ.

Discussion: A common cause for marks on the LCD is oil and dirt deposited on the keys of the keyboard that can get pressed against the LCD when carried in a carrying case or when pressure is applied to the lid.

There are many cleaners sold specifically as LCD cleaners. These are perfectly acceptable for cleaning LCDs on Dell notebooks.  If you do not wish to purchase one of these products designated specifically as an LCD cleanser, the following is a list of what is and is not acceptable for cleaning your LCD.

These cleaners might cause permanent damage to the LCD due to a chemical reaction. Some commercial window cleaners contain ammonia and are generally unacceptable.

Clean the computer’s built-in LCD display with a soft, clean cloth and one of the cleaners listed above or a commercial window cleaner that does not contain ammonia, wax, or abrasives. Apply the cleaner to the cloth, and then stroke the cloth across the display in one direction, moving from the top of the display to the bottom. If the display contains grease or some other contaminant, use a cloth with an acceptable cleaner listed above instead of a commercial window cleaner.

A. You can use Windex® to clean the screen and 409® clean the outer casing of the monitor. Please use a “soft” non-fibrous cloth to clean the screen. Do not use any paper products to clean the screen.

Shut down and unplug the computer and clean the LCD screen with a soft cloth moistened only with water. Wet the cloth, wipe the display, and then dry the screen with another soft cloth.

Gently dust the screen with a dry, soft, lint-free cloth. If the screen is still dirty, you can dampen the cloth with several drops of distilled water.  Make sure the LCD panel is completely dry before you turn the display back on.[/box]

Soak a soft gauze cloth with isopropyl alcohol or ethyl alcohol diluted with water (1:1) and gently wipe the surface of the monitor. Do not dust it or wipe it with a cloth dampened with pure water.

CAUTION: Never use pure water to clean the LCD screen. Do not use cleaning solutions containing fluoride, acids, or alkalis. Do not use ketone substances such as acetone or solvents such as xylene or toluene to clean the monitor. Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor’s screen or cabinet. These chemicals may damage the monitor.

This is the strangest one ever.  On March 21, 2003, I e-mailed every e-mail address I could find on Hyundai’s web sites.  I guess I threw them for a loop because I received a phone call from a Peter at AVC Tech USA.  That must be Hyundai’s USA distributor.  Peter told me that Hyundai has NO written instructions for cleaning their LCDs.  Quoting Peter this is what he told me to do: “use alcohol and soft cotton cloth and don’t run too hard”.

The display area is highly prone to scratching.  Do not use ketone-type cleaners (i.e. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride to clean the panel.  Doing so may result in permanent damage.

MAG was another hard one to get any information on.  On April 21, 2003, I finally received an e-mail response (I sent my first request for information back on January 21, 2003).  Here is the reply I received:

You can use regular Windex, just do not spray directly to monitor screen, spray to a soft rag or cloth and then wipe out gently, any other question please let us know and thank you for your time.

CAUTION: Do not use benzene or thinner or rubbing alcohol.  Doing so may adversely affect the surface, e.g. discoloration.  In addition, do not use commercially-available cleaners and cosmetics as they may contain components harmful to the surface.

Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based liquids.

A: For normal cleaning, use the clean, soft, and fine. For extensive cleaning, please use Isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.

If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen with only slight pressure. Too much pressure may damage the screen.

If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

A: We recommend that you use a cleaner specifically designed for electronic equipment to clean the case and, if necessary, a separate cleaner specifically designed for cleaning LCD Panels. This should be used in conjunction with a soft, lint-free cloth.

A: Any cleaning solution should be applied to the cloth. Under no circumstances should you spray the cleaner directly onto the machine. The excess cleaner may find its way into sensitive areas of the machine and can cause severe damage.

A: In general, the answer to this question is yes. Most cleaners that are satisfactory for cleaning the case of your WinBook are not satisfactory for cleaning the LCD panel. You should look for a cleaner that is specifically designed and labeled for cleaning LCD screens.

A: You SHOULD NOT use any sort of harsh solvents to clean your WinBook. This includes fingernail polish remover, alcohol, turpentine, gasoline, lighter fluid, acetone, paint thinner, mineral spirits, kerosene, ammonia, dishwashing soap, glass cleaner, vinegar, or any other commonly found household cleaner.

Q: Where can I get these cleaners that I need to use on my WinBook?A: Most good computer stores will carry these cleaning supplies. Also, they may be found at local electronics stores or office supply stores.

Use a non abrasive cleaning solution, diluting isopropyl alcohol (not rubbing alcohol, as it may contain oil) into a solution of 50% alcohol and 50% with distilled water water (or purified/bottled water). You could also buy a cleaning solution that does not contain bleach, ammonia, or vinegar.

Before you start, power-off and unplug your monitor. Spray the cleaning solution on a soft cloth (for example an old T-shirt), lint-free microfiber cloth, or some other very soft cloth. A large cloth is best, since it will help reducing the risk of leaving streaks across the display from finger pressure.

Starting from the top, wipe the screen in one direction until you have cleaned the entire screen. Apply light, but distributed pressure. Repeat if necessary. Let it air dry.

Keeping your precious rugged LCD monitors or LED screens clean and tidy can be challenging. This is especially true if you happen to have handsy young children who like to touch everything or pets running amuck in your household or even if you happen to work in a particularly messy environment such as a construction site or restaurant. Sometimes, rogue bits of debris can attach themselves to your electronic devices and while this is entirely out of your control for the most part, there are a few effective and harmless cleaning solutions you can put into practice to keep your electronics clean and running smoothly. Continue reading to learn about helpful tips for cleaning your LCD and LED screens without causing internal or external damage.

Before you can get down to the cleaning part, you need to prepare your LCD or LED screen in order to reduce the risk of liquids penetrating the surface and causing internal damage. Keep in mind that modern screens might technically include higher end features than the old school CRT screens from your childhood, but that doesn’t necessarily mean they’re more durable. In fact, modern LCD and LED screens are actually a lot more fragile and easily susceptible to damage if they’re not cared for properly. To prepare the screen for cleaning, make sure you shut down the system entirely, disconnect it from its power source, and then let it cool down for a few minutes. This will reduce the risk of electrocution and it’ll make it easier to clean the screen without resulting in annoying and unattractive streaks.

Occasionally, you’ll have to contend with a tough spot, streak, or fingerprint marking that takes a little extra effort to clean. If this happens, don’t panic and definitely don’t press down harder with a cloth or try to scrape it off with your fingernails or any other tool as this can cause severe damage to the top layer or anti-gloss coating. The best thing to do is use a non-abrasive cleaning solution such as isopropyl alcohol that’s diluted with either pure or distilled water. Spray the solution onto a microfiber cloth and gently wipe down the area in either an up and down or side to side motion. Applying too much pressure to even the most rugged touchscreen can compromise its limited durability.

There are a few types of cleaning cloths you can use to wipe down your rugged LCD monitor either at home or at work. The most recommended one is microfiber cloth for a multitude of reasons. First, microfiber is a state-of-the-art technological development that’s a thin and soft, yet strong enough material to thoroughly clean your electronic devices without risking damaging them in any way. Most of the time, computer and flatscreen TV manufacturers provide microfiber cloths with their products along with a specific set of maintenance and cleaning instructions. Microfiber cloths are immune to collecting or spreading lint across your screen, and because of the intricate way in which the minuscule fibers are intertwined these cloths are able to trap larger quantities of dirt and dust without leaving streaks. You can also use a cotton tea towel, a cotton t-shirt, or cotton handkerchief if you’re in a bind and don’t have microfiber cloths on hand.

This point can’t be emphasized enough. Even though it may seem like common sense that electronic devices shouldn’t come into direct contact with any liquids (especially if they’re still plugged in), not everyone seems to think so and many people have made the mistake of spraying cleaning agents onto their devices. The safer and smarter way to clean any rackmount LCD display is by first wiping it down with a dry cloth and then spraying a small amount of the cleaning solution onto a different cloth and wiping it down gently. After you do this, wipe it down with a clean dry cloth to remove any remaining liquid.

Always avoid using ammonia or rubbing alcohol based cleaners on your touchscreen devices. The devices themselves might be constructed with the capability to withstand most types of damages, but certain features they possess aren’t. Ammonia and rubbing alcohol can irreparably strip away or damage the extremely delicate anti-glare coating on the screen, which will not only negatively alter your viewing experience but also make your device a lot harder to use in strong sunlight.

Dust that settles between the gaps in the screen where the bezel and the top layer of glass or plastic meet can penetrate deeper and cause internal damage to your device. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can help you keep your device clean and free of any issues.

For extra measure, you can also spray the surface of your screen, computer keyboard, or even the vent on the back of the device with a can of compressed air to blast away any lingering and stubborn debris or dust. If any of it lands on the surface of the device, make sure to gently wipe it away with a clean cloth to prevent it from making its way back into your device. Implementing this cleaning method on a regular basis will ultimately help to guarantee the longevity and functionality of your device.

Nauticomp Inc. is the proud designer, manufacturer and distributor of countless rugged LCD and LED monitors and displays. We’ve been working in the technological industry for more than 20 years and supply a variety of businesses including marine bases, military bases, restaurants, casinos, retail stores, shopping centers, and healthcare facilities with durable and high-quality LED and LCD displays that serve a wide range of purposes. For more information about our company or our products, please feel free to contact us.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Back when you used to have CRT monitors and TVs, you could clean them with almost anything. The screen was made out of glass and nothing else. That’s no longer the case with today’s LCD and OLED displays.

The modern display is a sensitive device that requires special care. You can easily damage a touchscreen if you clean it using a rough sponge or an aggressive cleaning agent. You’ll eventually scratch the screen and damage its special coatings, and you’ll end up with an inferior device that no longer takes your touch commands. This applies to any laptop, tablet, TV, phone, or another device with LCD, MicroLED, or OLED display.

Most people open the box, take the smart TV or monitor out, plug it in, and that’s that. They ignore the manufacturer’s instructions. Don’t skip reading those instructions. Some manufacturers offer specific cleaning product recommendations to be used with their products.

For example, Dell might recommend using 70% isopropyl alcohol to clean one of their PC monitor models, while Samsung might recommend using nothing other than a dry microfiber cloth. Despite general recommendations, you should always prioritize the manufacturer’s specific instructions. This will also help you with warranty claims.

Some screens, especially touch screens, have special coatings for protection and to reduce the amount of reflection and glare. Harsh chemicals will remove those coatings and even damage the material of the display. Don’t use any household cleaning agents.

Stay away from glass cleaning products and anything that contains ammonia, chlorine, and even alcohol. Isopropyl alcohol is sometimes okay to use if specified by the manufacturer. Just make sure you pay attention to the percentage, which is usually 70% or 90%.

If you’ve been cleaning your TV or monitor with one of the aforementioned solutions, stop. Using them a few times might not cause any visible damage, but over time they’ll leave streaks once the protective coating is gone.

When you aren’t sure what’s safe to use, use canned air and microfiber cloths. Canned air is great for cleaning computer hardware, keyboards, as well as monitors, and TVs. It can’t cause any damage to the surface of the screen whether you’re cleaning a tablet, an OLED monitor, or an old school glass TV.

Dust gathers on the surface of your screen, especially around the edges, so start by blowing it off with compressed air. Use a high-quality microfiber cloth to move the stubborn dust particles when the compressed air isn’t enough. All you need is a light touch. Don’t press too hard on the display or you can damage it.

It’s very important to use microfiber cloth only. It’s soft enough not to scratch the screen or damage any of the protective coatings. Don’t use paper towels or tissues because they contain little loose fibers that can cause small scratches.

Sometimes canned air and dry microfiber cloth aren’t enough to remove stubborn particles. Don’t press extra hard when something dry is stuck to the display. Use distilled water instead. Tap water would also work, but we don’t recommend it because it contains all sorts of minerals that will leave streaks behind.

Take note that most manufacturers will tell you to avoid using any liquids, but sometimes you just don’t have a choice. Distilled water is safe to use as long as you just dampen the microfiber cloth enough to remove that pesky spot of dirt. Don’t spray it or splash it directly on your screen. Spray it on the cloth until it’s slightly damp.

Use a dry microfiber cloth to wipe the corners of the display and remove the dirt and oils from the screen. Use a light touch. Don’t press hard when you find a stain. This can cause serious damage.

Clean the back of the TV or monitor. You’ll find a lot of dust there. Fortunately, it’s all plastic, so you can use a multipurpose cleaning solution as long as you don’t touch the screen.

Instead of using distilled water with a microfiber cloth, you can opt for one of the many professional cleaners available on the market. It’s important to buy a cleaning kit or cleaning solution that is odorless and without any alcohol or toxins that could damage a TV or monitor display. So take a look at some of the best and safest cleaning solutions we’ve found.

WHOOSH! is an alcohol-free display cleaner. It’s suitable for all types of screens, whether they’re LCD, OLED, LED, or CRT. You can also use it to clean your mobile devices. In fact, this is the same display cleaner that Apple uses in its stores. It’s also completely odorless, so it won’t leave any residues.

EVEO is a screen cleaner safe to use on all types of TVs, monitors, and touchscreen devices. It’s great for removing greasy fingerprints and other stubborn smudges. Just remember not to press hard and use the microfiber cloth that’s included in the package. You can also use EVEO to clean other electronic gadgets.

If you don’t want to use sprays or liquids, try the lens and screen cleaning wipes from Care Touch. They’re individually packed, so when you need to clean a display, you always have one handy.

Care Touch wipes contain some isopropyl alcohol, but not in an amount that should be dangerous. The wipes are made for cleaning all types of screens without damaging the anti-reflection coating. As a bonus, you can also use these wipes on sunglasses and camera lenses.

The more often you clean your TV and computer monitor, the less you’ll have to deal with a build-up of grime and dust. This way a microfiber cloth should also be enough because you won’t have any tough dirt spots. So clean your screens regularly and keep them sparkling.

From the television to the computer to the tablets, screens and monitors are all around your house. As more and more devices move into the touch-screen mode, you may very well find you’re frequently cleaning TV screens and computer monitors. While you may be quick to grab some paper towels, glass cleaner and start wiping away, stop and ask yourself this: is this the best way to clean this screen? There are many different considerations for cleaning the screens and monitors in your house. Here’s a closer look at what you need to know.

Most of the TVs found in homes today have flat screen monitors and are quite different compared to screens on older models. Cathode Ray Tube (CRT) TVs of the past (like the big 1980s-style sets you may recall) had a thick glass screen that was relatively safe to wipe clean with paper towels and window cleaner. Not so with today’s flat screen models. Much of what’s on the market today has a liquid crystal display, or LCD, monitor that produces images. LCD televisions are also thinner and lighter than CRTs.

The make-up of an LCD monitor or screen, however, features a special type of material that is sensitive to chemicals, such as a glass cleaner. Likewise, a plasma display panel (PDP) is made with small cells that contain electrically charged ionized gases—the plasmas.

One of the most important steps to remember is to turn the device off before you begin cleaning. When the screen is dark it will be easier to see the dirty areas. Keep in mind that using harsh chemicals on these screens could ultimately damage or even ruin the television or computer. And it’s not just the cleaners you need to be aware of; kitchen towels or paper towels could also cause scratches and leave the screens covered in lint.

Knowing and understanding how to clean your screens and monitors can help ensure you’re able to use and enjoy your devices for years to come. Here are a few suggestions for properly cleaning these specialty screens.

Probably one of the most important considerations is to never spray any type of cleaning fluid or even water directly onto the screen. While the old CRT screens were pretty much water-tight, the same can’t be said for today’s modern screens. Screens today are made of layers upon layers of glass, plastics, various display elements, and other materials. When liquid comes in contact with the screen’s edge it can be pulled in, like a capillary, to the layers. Once this happens, you will likely notice something that looks like a blob on your screen, and the liquid will most likely never evaporate without leaving some remaining damage.

You may think that grabbing the bottle of glass cleaner you already have on hand is fine for cleaning screens and monitors. But think again. Using many of these common cleaning products can end up causing serious damage. Ammonia-based cleaners (such as traditional window cleaning spray), for example, could cause a chemical reaction with the coating on the screen or cause clouding. Some electronics stores sell specialty cleaners for use on screens, but you can also make cleaning solutions at home. One option is to combine equal parts of water and vinegar for a homemade cleaning product. But don’t spray anything directly onto the screen. Instead, spray the solution onto a lint-free cloth and gently wipe the surface.

You’re on your computer A LOT. If you’re like most people, you’re on it anywhere from 3 to 7 hours a day. And the screen is REALLY close to your face, like 12 inches or so.

Which means all that coughing, sneezing, coffee sipping, and touching is inevitably leaving behind a trail of gunky, oily, germy messiness. Most visible when the screen goes black, sure, but sitting there, staring back at you the whole time. What to do?

The sleeve of your shirt won’t cut it this time. It’s time for a computer screen intervention (aka a helpful cleaning guide) to bring the dignity back to your monitor.

Don’t directly wet the screen. That means never spray it. If you’re going to use a cleaning solution, spray your cleaning towel, and then wipe the surface of the screen. When you spray it directly, you risk oversaturating the pixels, which can cause component failures, electrical problems, and even fire.

Don’t use regular cleaning supplies. Using multi-surface or glass cleaning products is a big no-no. The chemicals in these products are too strong for your monitor. Even regular soap and water is too harsh of a solution for your computer screen.

Don’t press too hard. Use a gentle circular motion to clean your screen and never apply too much pressure. Doing so can cause permanent damage, and is a major bummer when all you were trying to do was remove that coffee splatter.

Turn your computer off. A black screen makes spotting smudges and oil schmears easier, but merely putting your computer to sleep isn’t enough. Powering your computer down ensures you don’t damage its pixels while they’re still firing electricity and also eliminates the risk of electric shock or even fire.

Use a microfiber cloth. Never use a paper towel, old t-shirt, or napkins to clean your computer monitor. At worst, the fibers in these materials may scratch the surface of your screen and at best, they’ll leave a trail of lint. Instead, use a microfiber cloth, which is made up of a super soft synthetic material that won’t cause any damage to your screen, and will wipe away debris beautifully.

Wipe gently. Use a gentle, circular motion to wipe your screen clean. For any tough food particles or debris, a repeated circular motion may help do the trick. If not, skip to the next method which will show you how to make a homemade cleaning solution. It bears repeating, never spray your screen directly with cleaners, or soap and water.

Clean the frame and base. The only areas of your monitor that can withstand multi-purpose cleaners are the frame and base of your computer. Very carefully, lightly spray a paper towel with the cleaner (don’t soak it!) and run it along the frame and base. Never apply the paper towel to the actual screen of your computer.

Turn your computer off. For this method, the first step is to again power down your computer so that you can easily see all the debris on its screen AND so that you don’t inadvertently cause damage or burnout to the pixels.

Make a cleaning solution. The first and easiest cleaner you should try is distilled water, which doesn’t contain any chemicals. If your screen needs something stronger, mix ¼ cup distilled water and ¼ cup white vinegar in a spray bottle. If you don’t have white vinegar, a ¼ cup of distilled water and a ¼ of rubbing alcohol will do the trick, too. This simple solution can be used on many household items, from windows to shower doors .

Spray the microfiber cloth. Spray your cleaner onto a clean microfiber towel. Never spray the screen directly or you risk component failure or electrical shock.

Cleaning your computer screen will provide the much-needed physical (and mental!) cleansing you so desperately deserve. If you’re on a laptop, you can rest assured you won’t offend anyone at the coffee shop or in the conference room with splatters from last week’s roast beef sandwich. If you’re on a desktop computer, a clean screen could be just what you need to feel at home in your home office. And if that doesn’t do the trick, hey, maybe try washing the walls. Either way, cleaning your monitor is a win-win.

Where would we be without TVs? With Netflix viewing rates going through the roof each year, our generation is one that loves to relax in front of the TV on a daily basis. Today’s generation loves nothing more than relishing in a new binge-worthy television series or spending hours in front of their TV playing high-resolution video games on their newest

Many people have invested in HDTVs in recent years but don’t know how to clean them. This article will guide you on the best way to clean your tv screen and keep them viewing friendly.

The worst thing that you can do when cleaning your HDTV screen is t