mikrotik lcd touch screen supplier

RouterBOARD 2011U and CCR series devices are equipped with a resistive touchscreen, for quick access to device stats and simple configuration options. Touchscreen requires pressure against the surface to register a touch, therefore light swipes and quick/short taps might not get registered (as opposed to a capacitive touchscreen commonly found on phones). If you find trouble operating the screen with your finger, you can also try a stylus, or opposite end of a pen.

Before the LCD touchscreen can be used, it needs to be calibrated at least once. After the first successful calibration, data is stored on the router. If no calibration values are present, calibration process will start automatically.

Take-screenshot function allows to create BMP image of currently displayed LCD screen and saves it in File List with specified name. Screenshots without file name are not saved, screenshots with an existing file name are overwritten.

Interfaces menu provide configuration for interface display timing in Stat Slideshow. Up to 10 additional (non-physical) interfaces can be added to the LCD.

Maximum interface speed that is used to determine bandwidth usage in All interface graphs and Interfaces screens. "auto" value can be set only for physical interfaces.

A Page is an screen that can contain up to 12 interface bar graphs. Sub-menu allows to configure which interfaces are shown in a page. Up to 5 pages can be added to all interface graph screen and up to 12 interfaces per page. To add an interface to a page, it first must be added under /lcd interfaces sub-menu.

PIN code number allows to protect sensitive menus on the LCD screen. The PIN number will be asked if Read-Only mode is disabled and you add an IP address, reset or reboot the router. Default PIN is 1234

Since v6.0, LCD has a menu structure. Menu screens consist of buttons that are used to navigate the menus. A scrollbar is shown on the right side of the screen if it does not fit on the actual display. The screen can be dragged up or down to access more options if they are available. At the top of each menu screen is a "Back" button that jumps to the previous screen.

If the router has default configuration - user named "admin" with no password, then a warning on LCD will appear. This screen shows IP"s assigned to the interfaces which could be used to connect to the router.

Interfaces menu displays all the Ethernet and Wireless interfaces. Bandwidth usage is shown similar to the All interface graph screen. From the Interfaces screen you can choose a specific interface to look at.

If a tap lands into the top right corner of the screen (square box 1/4 of the screen height), info time interval is changed: Min -> Hour -> Daily -> Weekly -> Min...

All interface graph screen shows the RX/TX bandwidth usage about all interfaces. The max values are calculated like this - for Ethernet interfaces it"s the negotiated rate or set speed. For wireless interfaces it"s calculated from used band, channel-width and chain count using the theoretical values. The goal of this screen is to see how values are related to each other for a single interface.

Stat Slideshow screen is similar to the "Stats" screen, but the interfaces are switched after they timeout. Settings for slideshow are stored in RouterOS submenu /lcd interface

These screens are only available when Read-Only mode is disabled. To access any of the screens, the Pin number must be entered. If the Pin authentication is successful, the user must confirm the desired action by pressing the "Yes" button, or cancel by pressing - "No".

I just bought a RB2011UAS-2HND-IN, the touch screen is incredible insensitive. After many tries I may be able to change screen (if I have the luck on my side). I tried “/lcd reset-calibration”, but there are no reaction when I try to press on the first “X”.

No improvements for the calibration, it doesen"t register when I press the "X". Tried finger, nail and stylus. Pressing, holding, swiping, no response what so ever. The touch it self seems littlebit more responsive, could be just me geting used to it...

Mine RB2011UAS-2HnD-IN is the same -touch display is unresponsive and/or defect - only some kinds of triangles appears on it with message Interface down. Shame.

Mine RB2011UAS-2HnD-IN is the same -touch display is unresponsive and/or defect - only some kinds of triangles appears on it with message Interface down. Shame.

These settings are not correct. LCD touchscreen is configurable under "/lcd" menu. "/system lcd" menu from optional LCD package is used for LCD displays.

I"ve done all upgrades (now I"m in firmware 3.0 and routerOS 5.21, bundled version was rOs 5.20) but the calibration still not work: I"m not able to register the first cross to push due to unresponsive screen.

I"ve done all upgrades (now I"m in firmware 3.0 and routerOS 5.21, bundled version was rOs 5.20) but the calibration still not work: I"m not able to register the first cross to push due to unresponsive screen.

im actually purchased my 2011[non-RM wariant with WiFi and LCD] and nearly start feel sorry about not picking RackMount-version instead[despite absence of (rarely used until now)WiFi], because fragile-looking enclosure, [not laugh:]red color in front and LCD in weird state - protective cover scrateched, partially removed["by force"]/twisted and half-screen not touch sensetive.

after reading THIS thread i discover than LCD was left in "Disabled" state and locked to [not used yet]SFP cage. i guess wrong defaults in RouterOS config[i was used 6.0rc5].

After upgrade from 5.22 to 6.rc05 and clean netinstall again 5.22 /rc05 is full of bugs / and reconfig my home router ,I saw that lcd not working properly - but

Mine RB2011UAS-2HnD-IN is the same -touch display is unresponsive and/or defect - only some kinds of triangles appears on it with message Interface down. Shame.

These settings are not correct. LCD touchscreen is configurable under "/lcd" menu. "/system lcd" menu from optional LCD package is used for LCD displays.

I need to know what correct settings are. They are not given here. They are not given in the manual. After installing lcd package I also had settings reset to "set contrast=0 enabled=yes port=serial0 type=24x4"

CLI has lcd and system -> lcd, but lcd settings are not effective. backlight-timeout: 5m, but backlight does not turn off. Backlight obeyed set timeout originally. Installing and removing lcd package broke something. Now what?

for example - inpredictible touch sensetivity feats[regardless accuracy/pressure], ignore settings from LCD portion of settings[from CLI], randomly shuffling slideshow on random interface, ignore "backlight" timer setting.

Probably the selected serial port is used by PPP client or server, or by the serial console. Check the availability and use of the ports by examining the output of the /port print command. Alternatively, select another port for connecting the LCD, or free up the desired port by disabling the related resource

RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-IN, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!) Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. RouterBOARD 2011UiAS-IN comes with desktop enclosure, LCD panel and power supply. Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

[ 0.000000] Kernel command line: benand_no_swecc lcd_ctrl=84 parts=1 boot_part_size=4194304 gpio=249403 HZ=300000000 mem=128M kmac=CC:2D:E0:03:8E:B1 board=2011r5 board=2011r5 ver=6.45.7 bver=3.41 hw_opt=00718004 boot=1 mlc=11 console=ttyS0,115200 rootfstype=squashfs noinitrd

RouterBOARD 2011UAS-2HnD has most features and interfaces from all MikroTik Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful (up to 1W!) dual chain 2.4Ghz 802.11bgn wireless, RJ45 serial port, USB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel.

RouterBOARD 2011UAS-2HnD has most features and interfaces from all MikroTik Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful (up to 1W!) dual chain 2.4Ghz 802.11bgn wireless, RJ45 serial port, USB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel.

RB3011UiAS-RM - The RB3011UiAS-RM is a 10-port device and the first from MikroTik to be running an ARM architecture CPU for higher performance than ever before. The RB3011UiAS-RM is a 10-port device and the first from MikroTik to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a Superspeed full size USB 3.0 port, for adding storage or an external 3G/4G modem. The unit comes with a 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.

Product Features • ARM architecture CPU • More than 2 x performance of RB2011 series • 10 x Gigabit, USB 3.0 • LCD Display • Serial Console Port Product

• OS: MikroTik RouterOS, Level 5 license Product Includes (1) RB3011UiAS-RM (1) Power Supply (1) Rackmount Enclosure Technical Data Sheets and User Manuals RB3011UiAS-RM Data Sheet RB3011UiAS-RM Quick Setup Guide _DELETE_

RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.

RB3011UiAS-RM Unit comes with a 1U rackmount enclosure, a touchscreen LCD panel, a serial console port, and PoE output functionality on the last Ethernet port.

Buy MikroTik  RB3011UIAS-RM RouterBOARD online from Rapidtech Digital Solutions with fast delivery across the country and in-store pickup in Nairobi. We also offer free deliveries within CBD for selected items.