how do i clean my lcd screen factory

When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.

To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.

You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.

Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.

how do i clean my lcd screen factory

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

how do i clean my lcd screen factory

Your television is probably one of the last things you think about adding to your "to clean" list, but the difference between a smudgy screen and a crisp picture isn"t one to shrug at. Every day, our TVs accumulate dust and fingerprints, and the buildup occurs so slowly that it"s hard to notice. That is, until you take a quick 10 minutes to clean your TV and revel in a far more satisfying cinematic experience.

We asked a couple cleaning pros for the full rundown on how to clean TV screens of all types, including flat plasma and LCD screens, along with some common mistakes people make when cleaning their TV screens so you know exactly what to avoid.

To prevent buildup from accumulating on your TV screen, aim for a once-weekly TV cleaning. "It"s important to clean your TV screen not only to prolong its lifespan, but also to provide the clearest picture possible—smudges, dust, and fingerprints be gone," says Kathy Cohoon, a cleaning professional with Two Maids & a Mop. "It can make a big difference in the aesthetic of your TV and the picture on screen."

Power down. Before breaking out any dust cloths or cleaners, make sure your TV is off. If you want to take an additional precaution, Cohoon says you can also unplug the TV, but it"s typically not necessary for modern TVs.

Dust the screen. Dry dusting your TV is a crucial step in the cleaning process. "Removing dry debris will ensure that you don"t accidentally create scratches by scrubbing a rough piece of dirt or buildup into the screen," Cohoon says. She recommends using a microfiber or soft cloth to gently dust the entire screen. If needed, flip the cloth over (or get a second cloth) in order to completely remove all dust, pet hair, and other loose debris. You can use a microfiber cloth to wipe down the speakers and cords as well.

Use screen-safe cleaner.Spray a small amount of screen-friendly cleaning product onto a soft cloth—never directly onto the screen itself—and wipe the TV down in a methodical, back-and-forth motion. Check that the cleanser is safe for the specific type of screen you are cleaning. Repeat as necessary to remove oily areas or fingerprint smudges. Also, don"t forget to gently wipe down the top and base of the TV.

Clean smudges on the screen."For tougher spots, make sure not to apply too much pressure, especially on more delicate screens," advises Leanne Stapf, the chief operating officer for The Cleaning Authority. "If microfiber cloth spot-cleaning doesn"t work, I recommend adding a bit of warm water to the cloth and then cleaning the spot with the dampened cloth."

Dust.Use a microfiber cloth to gently wipe away loose dust, dirt, or any other debris. You may need to turn the cloth over or get a second one to adequately remove everything.

Wipe down the screen."Since these screens are a bit sturdier, you can mix equal parts rubbing alcohol and lukewarm water to create a cleaning solution," Cohoon says. "Using a small amount of solution on a soft cloth, wipe the entire screen, base, and top." Spot-clean any stubborn areas with caked-on messes or heavy fingerprints. You can also remove fingerprints by rubbing with a microfiber cloth in a circular motion.

​​To clean and sanitize a remote, Stapf says to simply use a disinfecting wipe to remove bacteria, germs, fingerprints, and any other residue. Make sure the cleaning wipe is damp but not soaking wet to avoid getting liquid inside the remote control. Spend some time cleaning between the buttons since gunk can easily accumulate here.

It"s also a good idea to remove the batteries first, or you can take the remote to a different room so it doesn"t inadvertently change the TV settings as you clean the buttons.

Forgetting to Dust First: "A big misstep when cleaning a TV is forgetting to dust the screen before using a cleaning agent," says Cohoon. This can lead to tiny scratches that slowly degrade picture quality.

Scrubbing Too Hard:Modern TV screens are delicate and require a gentle touch. Wiping too vigorously or using a rough cloth can damage the screen quickly.

Spraying Solution Directly Onto the TV:All wet cleaners should be sprayed onto a cloth and then wiped over the TV. Spraying directly onto the screen can create spots that are hard to remove. It also puts you at risk of damaging the speakers.

Using Non-Approved Cleaners: Using store-bought glass cleaners on OLED or LCD TV screens is a big no-no. Stapf says, "These products contain harsh ingredients like alcohol and ammonia, which can damage the panels of the screen."

how do i clean my lcd screen factory

Over time, dirt, smudges, dust, and more can reduce the picture quality on an LCD, much like looking through a dirty pair of glasses. Cleaning an LCD screen is a simple and straightforward process.

3. Do not spray any cleaning fluid directly on the LCD screen to prevent liquid from dripping inside of it. (This also applies to touch screen monitors.)

4. A suitable cleaning solution for LCDs is a mixture of 50% Isopropyl alcohol and 50% distilled or otherwise purified water. For touch screens, 5-10% bleach may be used to clean the touch glass without harming it.

5. For purposes of disinfecting, benzyl alcohol and/or hydrogen peroxide can be used without harming the LCD screen and/or Touch Screen; please follow the same application directions as above to avoid damaging the touch screen and/or PC.

how do i clean my lcd screen factory

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

how do i clean my lcd screen factory

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

how do i clean my lcd screen factory

Television screens are supposed to be clean and free of dirt, dust, or any debris that may blur vision. This is why this component is one of the most vital parts of a Television. Nothing can be worse than straining your eyes to make sense of the pictures your set is projecting. If you do not clean your TV regularly, fingerprint smudges and dust will build up.

Cleaning your LED TV or any type of television for that matter is something you should do at least once every 2 or 3 weeks. In fact, I will suggest that you do it as often as you watch it any paying more attention to the screen when you do so. If you clean your TV set regularly, it will always look brand new, and you will enjoy bright and colorful pictures without said. Bearing that in mind, there are ways to go about a cleaning endeavor. Unfortunately, not everyone knows how to clean a set effectively. Many think that a piece of towel soaked in water will do. How wrong they are. Television screens are very sensitive, so a great deal of care is required to do the job effectively. In addition to that, being careful also protects the screen for damage. Secondly, you need to understand that TV sets are different. Although they all project sounds and images, they are built differently. So, therefore, the approach to cleaning should also be different as well.

The approach to cleaning an LED TV screen, for instance, requires extra care compared to the cleaning of a Tube TV. They both have screens, but the former is more sensitive than the latter due to the sensitivity of LED screens build material. Bearing all this in mind, how do you safely clean an LED TV screen without damaging it in the process. In this article, we will show you safe and intelligent ways to go about it using available and affordable materials. You will also learn a few tips about how to do it safely too.

Before you proceed, you need to bear two things in mind when cleaning LED TV screens. Firstly, you want to do it in such a way and with the right materials that ensure the screen is clean and devoid of dust or stains of any kind. You want your screen to be as bright and clear as possible. Secondly, you want to avoid damaging the screen or reducing its projection quality. This is why it is necessary to use only the right cleaning materials and approach at all times. Now, here are some helpful tips for adopting when cleaning an LED television screen. [/fusion_text]

Every electronic equipment comes with an owner’s manual. This manual provides the user with sufficient information about how to use and maintain the gadget. The same thing goes for LED sets. They come with an owner’s manual too. Before you clean the set, you may want to read the manual first.

In fact, it is advisable that you read it first immediately you buy and install it in your home. By reading the manual, you gain more understanding regarding how to care for the television all through it a lifespan in your home, office, or wherever you install it. For the purpose of cleaning, pay attention to the section that provides information about how to do it effectively.

Reading manuals is important because different television manufacturers provide different approaches to cleaning their sets. What works for an LG LED TV may not work for a Samsung set. That is why it is so important to only follow the recommendation of a one cap fits all approach to cleaning your TV screen. If you read the manual when you bought it, but you have forgotten the cleaning details, consult it once again to refresh your memory.

Before you start the cleaning properly, turn off the television set. Do not stop at that. You also need to unplug it from the power source. Once you have done that, do not start cleaning the screen immediately. Give it time to cool down. The cleaning process may take between 2-5 minutes or even more depend on your LED TV model or how long it was on.

Turning the TV off will cut off power leading to the cooling down of the screen. You don’t want to be cleaning a hot or warm screen, do you? You want to make sure that the screen is as cool as possible and non-reactive to whichever cleaning agent you use.

Another advice to take in that is so important is that you should never use paper towels to clean the screen. There are reasons to avoid paper towels. Paper towels, especially when soaked in water, leave smudges and stains on the screen. No matter how long or how hard you try to wipe the marks off, they yet remain. Paper towels are bad for your TV screen. It’s as simple as that.

To enjoy an ultimate cleaning experience, you should consider using microfiber cleaning pieces. Some people recommend cotton whole because they are more breathable. However, microfiber cloths are more durable. In addition, they do not stick to your screen. Older LED, or LCD screens can’t handle traditional cleaning methods or materials. With microfiber, you can eliminate stains, remove smudges, and fingerprints with ease.

To use microfiber, simply wipe the surface of the screen in a circular motion. Cover as much part of the screen as you possibly can. Work your way around the edges as well. More importantly, when cleaning, avoid touching the screen with your bare hands as doing so will leave fingerprint marks on it.

The use of chemicals should be avoided at all costs. Chemicals damage screens more than you know. That a chemical agent worked on a particular surface is not an indication that it will work well for your TV screen. LED screens are very sensitive and fragile, so you ought to make sure that you keep chemicals as far away as possible. Another material you should never use is a detergent solution (water and detergent).

Soap, scouring powder, was window cleaners, and any other general industrial cleaner should be avoided. Abrasive pads and towels made from paper should not be used either. Using any of these materials will lead to screen scratches, anti-glare coating damage, or permanent screen damage. The sad part is that the damage may not be noticeable at first, but over time, the same will become permanent.

If you must wet your cleaning material with water, do so in little splashes. Avoid spraying the screen directly with water. When wiping the screen, do so gently because it can break if pressed too hard as screens are very fragile.

You will notice that your microfiber cloth cannot reach the edges of the screen like the other areas. If you don’t clean the edges too, dust and first will accumulate in those parts, and after a time removing the stains will love difficult. Furthermore, failure to clean screen edges will lead to an uneven appearance, with poor picture quality being the end result. To clean edges and corners effectively, use cotton swabs to greater effect. For better results, dab the cotton swabs in water. Pick off the dirt carefully by dragging them out using the swabs. Do this for the four corners of the screen.

As for the edges, run the swabs up and down systematically but avoid running them all the way down to the edges as this may drive dirt further on that may be difficult to remove. For better results, use as many cotton swabs as you can.

Unlike an LED TV screen, cleaning a Tube TV is much easier. Tube TV screens are more rugged and can withstand pressure, but doing so carefully is also important. You can use a microfiber cleaning cloth doused in a little water. Never spray the screen directly as this may damage it. Rather, work your way with the microfiber cloth. Apply the same circular cleaning motion like you would do an LED TV screen. Cotton swabs will also come in handy to pick off the dirt from the screen corners.

Dish soap can also be used on LED and LCD screens, albeit with care. Before you use a dish soap solution, first wipe the screen with a dry cloth to remove dust. Now, dip your cleaning cloth in the dish soap solution. Squeeze off the liquid then gently wipe the screen. Make sure you cover every surface area. Once you are done, don’t waste time to clean; otherwise, the solution will dry up on the screen leading to a blurry vision. Rinse the cloth with water to remove soapy residue then take the dry cloth you used to wipe off the dust once again to dry the screen.

Yes, they do. There are actually cleaners specially made for cleaning tv screens. Screen cleaners contain distilled water, isopropyl, and alcohol solutions. If you must use an electronic screen cleaner, make sure you shake to content before use. Also, apply on a limited portion of your cleaning cloth.

Cleaning your TV remote control is part of a general TV cleaning process. So to clean your remote control, follow these tips. Pop-out the batteries:Remove the batteries from the remote. Doing so will create enough room when cleaning the interior casing.

Tap the remote lightly on a hard surface:Remote controls gather a lot of dust and debris along the way. To remove them, tap the remote control on a hard surface like a table. Do this gently and several times to dislodge debris stuck in crevices.

Use a mild disinfectant:Apply a cleaning disinfectant on a piece of cloth and clean the body thoroughly. The use of disinfectant is necessary because our hands carry germs, and we transfer these germs to the remote control anytime we operate it. Clean the whole body thoroughly.

Maintain a weekly timetable:To ensure that your TV set is always clean, make sure you clean it weekly. Add it as part of your to-do list when cleaning your home. If your furniture deserves regular cleaning, so does your television set. Doing regular cleaning will atop dust, debris and fingerprints from smearing the screen. It is also much easier to clean when there is little dust on the surface. Keeping a microfiber cloth close by is also advised so that you can quickly wipe off dust when necessary.

Never spray your LED TVset directly with any substance:Avoid spraying your screen directly with any substance even if it is an electronic cleaning gel. Excessive spraying can damage the cabinet and the structural make-up of the screen. If you must use any cleaning solution, apply it on the napkin or microfiber cloth you are using and gently wipe the screen with it.

Use a Vacuum:To draw out dust and debris hidden in the crevices of the set, use a low suction vacuum. You may also use the vacuum cleaner’s soft brush to remove dust from the cable, vents, and ports of the TV

Adhere strictly to the User Manual:Your LED TV set comes with a user manual for a reason. The manual is meant to guide your use of the device. When cleaning your set, make sure you follow the directives of the manufacturer. Doing it any other way may damage the TV beyond repair.

Avoid strong cleaning agents:Just like we pointed out in the article, avoid strong cleaning agent as not all of them are good for your television’s screen. The screen is very sensitive, so bear this in mind. Some examples of cleaning agents to avoid include unmixed alcohol, ammonia, acetone, and Wax.

Maintaining your LED TV set requires a lot of patience and attention to detail. If you want the screen to remain in good shape, you need to clean it regularly and with proper cleaning materials. If you follow the tips in this article, your screen will remain bright and sharp for as long as you use the set.

how do i clean my lcd screen factory

It happens: There are parts of our homes we simply don"t get to during our weekly cleaning routines. And as much as we love catching up on our favorite shows, our TVs are occasionally the items that get overlooked. It"s important, however, to make cleaning their screens a priority, since they"re prone to dust, smudges, and fingerprints.

Thankfully, it"s easy to make your TV screen sparkle again with the right supplies and methods, say cleaning and tech experts. Ahead, these professionals explain how to clean every type of TV screen—along with your remote control.

You should dust and clean your TV screen once a week and should always include this chore when tidying up your home, says Kathy Cohoon, the director of franchise operations of Two Maids & A Mop. "Keeping your television screen clean and well-maintained can help provide a clearer picture (no more dust or fingerprints!) and prolong the lifespan of your TV," she says.

Put away the Windex and paper towels: Both are too harsh and rough for your TV screen, whatever its make or model, says Peter Lopez, the founder of Brooklyn Tech Guy. In fact, you don"t need a glass cleaner or much product at all—simply use a damp soft microfiber cloth. "Just using that can help a lot, since dust buildup can keep electronics from being able to cool off properly," he says.

If your flat screen is still dirty or greasy after sweeping it with a microfiber cloth, create a solution of distilled water and white vinegar, says Joel Worthington, the president of Mr. Electric, a Neighborly company. He recommends mixing equal parts of each ingredient and spraying it onto a cloth before wiping down the screen.

Do you have an old-school TV in your home? Formally known as cathode ray tube (CRT) TVs, box televisions require similar care to flat screens. Although their cleaning process is similar to the one listed above, you can also include rubbing alcohol in your DIY mixture.

As always, use a soft cloth, says Vera Peterson, the president of Molly Maid, a Neighborly company. This will prevent scratches and help you rid the screen of any excess cleaning solution.

When you dust and clean your TV screen, you can and should tackle your remote control, too. Cohoon says you can actually sanitize it daily with an aerosol disinfectant spray, but you"ll want to avoid using any harsh chemicals, like bleach, or getting it too wet when you give it a deeper clean.

how do i clean my lcd screen factory

General Digital specializes in manufacturing LCD monitors and we know the struggles of maintaining a showroom-clean screen. We’re happy to share with readers our 3-step cleaning method, which will aid in the proper cleansing of your display.

Step 1) Put on the oil-free gloves and fold a lint-free wipe in half 2 -3 times. Proceed to spray the wipe until lightly moistened with UVEX™ or alcohol. Remember to NEVER SPRAY THE MONITOR DIRECTLY.

Step 2) Wipe the monitor with the lint-free wipe from top to bottom vertically. Wipe slow enough to avoid redepositing particles, but fast enough to avoid leaving any smudges on your screen.

how do i clean my lcd screen factory

This approach does not bode well for cleaning the LCD screens of you digital signage system, though. And yes, the screens will need cleaned. One of the first responses users have when they see a new signage screen installed is to check if it is a touch screen. Whether it is or not, the finger prints are just the same. There also is a significant portion of the population that can not point to something on a screen without touching the screen with their finger.

A great way to see how much of a cleaning your screen requires is to turn it off. The light reflecting off the surface will highlight all of the smudges, fingerprints, and smears, usually in alarming quantities.

This is exactly what NOT to do. Ammonia based cleaners can damage any special coating that is on the screen. Depending on the brand, paper towels are fairly abrasive, to go along with the amount of lint debris they tend to leave behind.

Another tendency is to put some elbow grease into those tough to remove smudges. If they don’t rub off at first, you may be inclined to scrub harder. Doing so can damage the pixels in the screen.

LCD screens are designed to be cleaned with a delicate touch. Most light marks can be removed by gently wiping the screen with a dry microfiber cloth. For more stubborn smudges, you may need to dampen the cloth.  There are several cleaning solutions you can purchase, or for the Do-It-Yourselfer, use a 50/50 mixture of distilled water and vinegar. Do not spray the solution directly on the surface of the display. It could run down inside the display and cause damage to the electrical components. A good rule of thumb is liquid and electricity do not mix. It is best to spray the solution lightly onto the microfiber cloth and then wipe the screen. Repeat if necessary.

how do i clean my lcd screen factory

Ever wonder what’s safe to use when cleaning your smartphone, computer monitor, or flat-screen TV? They always seem to be attracting dust. Smudgy fingerprints appear practically overnight. If you’ve ever wondered how to clean your phone, tablet, laptop, or any other screen, you’re in good company. Here’s where to start with screen cleaning.

Sometimes you need a high-tech solution to a high-tech problem, and this Carbon Smartphone Cleaner by SmartKlear is just that. The invisible carbon substance in the pads is the same stuff NASA uses on the Space Station windows. A swipe is all it takes to remove smudges, oily fingerprints, and greasy residue—the microscopic grime that accumulates on your screen that napkins, washcloths, and your shirt just push around. As you slide SmartKlear back into its case, the carbon pad slides against another carbon pad to clean itself, making it good for hundreds of uses.

Your phone goes everywhere with you. Bathrooms. Dining rooms. Rooms where people are sneezing. To annihilate germs and sheer grossness, hand it to the Hans Anti-microbial Screen Cleaner. This compact, two-sided device quickly and easily wipes away fingerprints, film, buildup, and bacteria. Hans uses a cleaning sponge saturated with screen-safe, antibacterial cleaner, which can easily be refilled as needed. Then flip it over and use the microfiber polishing cloth to restore that factory-fresh shine.

Your phone isn’t the only touch screen you need to clean on occasion. Other touch screens—like household appliances or tablets and e-readers—also need a polish now and then. And with the Touchscreen Cleaner by iRoller, you can roll the grime away. Its sticky surface was first developed to hold surgical instruments in place, but it’s just as effective at peeling fingerprints and dirt off your screen.

You have to be careful when cleaning new TVs. Never use glass cleaner. Unless you have a 30-year-old tube TV, you know, the kind that’s a foot or two thick and actually has a solid glass screen. Windex or anything else containing ammonia, alcohol, or acetone could spell disaster for your screen’s tech.

Plasma, LCD, and newer OLED screens all employ sensitive technology that doesn’t get along with traditional household cleaners. Instead, power your TV off and use a soft, lint-free cloth (preferably microfiber) to gently buff away fingerprints and dust. Don’t push too hard, though, because you could grind the dust in causing micro-scratches on the screen.

For tougher jobs, you can use a gentle cleaning solution like Screen Mom’s Natural Screen Cleaner. It will polish your screen without the ammonia, alcohol, or acetone found in many other household cleaners.

Treat laptop and computer screens just like you would a TV screen. The tech is different, but safe cleaning methodology is the same. First, power off your computer. Gently wipe with a soft cloth or a microfiber screen cleaner sponge from Mist. If necessary, use a gentle cleaner like Screen Mom—something that’s free of ammonia, acetone, and alcohol. Gently dampen a microfiber cloth with the cleaner and buff softly in circular motions. Your screen will look as good as new in no time.

If you’re still not sure how to clean your screen, phone, or other devices, try checking with the manufacturer. They’ll be able to clear up any questions you have about what cleaning supplies are safe. Then make sure to keep those supplies close at hand. You’ll be prepared to solve gross screen problems wherever you notice them. It’s just one of those small steps you can take to hack a sanity-saving solution into your busy schedule.

how do i clean my lcd screen factory

NEVER spray any type of cleaner, including plain water, directly onto any type of flat television screen. Excessive moisture or cleaning chemicals can permanently damage the screen.

Use a disposable static-cling duster or a clean microfiber cloth to dust the front of the television screen. Do not apply excessive pressure because screens can crack.

A microfiber cloth will remove fingerprints without leaving lint or scratches from the fibers by applying gentle pressure to the area. If food has splattered onto the screen, slightly dampen the microfiber cloth with plain water and wipe away the residue. Immediately dry the freshly cleaned area with a clean microfiber cloth.

Once the screen is dust-free, don"t forget the top, sides, and back of the television. It is particularly important to make sure that vents are dust-free so that heat can escape easily.

Even if you have "cut the cable" and gotten rid of cable television, there are still cords and cables that gather dust on almost all television. A long-handled disposable duster is a good choice to reach these areas.

If you have external speakers, dust them well. A sticky lint-roller is a perfect tool to lift dust away from the fabric covers on the front of many speakers. Dust gaming boxes and other added components as well.

Television remotes and game controllers are some of the most bacteria-laden items in our homes and should be cleaned daily. If someone in the household has a cold or virus, remotes should be cleaned after every use.

If you have an older glass tube television, the cleaning steps are very similar. While the glass tube screen can withstand a bit more moisture, never spray anything directly onto the screen.

Dampen the microfiber cloth slightly or spray a tiny bit of isopropyl alcohol onto the cloth to wipe away any smudges or fingerprints on the screen. Never spray anything directly on the screen because it can cause damage to the components and the surrounding cabinetry.

Set aside one microfiber cloth to use only on electronics screens. This will prevent the accidental application of residue cleaners left in the cloth from other tasks.

If you cannot find the manual that came with your television, look online for cleaning instructions. Not following the cleaning guidelines of the manufacturer can void the warranty.

how do i clean my lcd screen factory

Once you see it, there’s no use trying to ignore it—fingerprints, smears and smudges all over your TV screen. You have no recollection of ever touching your the screen, and yet there they are, stopping your favorite show dead in its tracks. And don’t even get started on the dust. Now, instead of enjoying some downtime, you’re doing a forensic analysis of what must be the most neglected surface in the home.

We’ve been there. It seems like some of the most sophisticated equipment we own (TV screens, computer screens, and phones) tend to also be some of the grossest.

The good news? With this handy guide at your fingertips, you can easily return your TV to its fresh-from-the-box perfection. And many (if not all) of the supplies you need for the job are already somewhere in your kitchen. No need to wait for a commercial break, let’s get to it.

Clean your screen with a gentle, circular motion. Avoid pressing down too hard, even when you’re trying to remedy tough-to-remove spots, as this can do irreparable damage.

There are a number of cleaning solutions you can choose from (more on that below), but no matter which one you settle on, never (emphasis on “never’) spay solutions directly on the screen. Instead, spray them onto your cleaning cloth. Remember: electronics and liquids don’t mix.

Did we mention you never spray a cleaning solution directly on your TV screen? We did, because it’s important enough to mention more than once. Below are four effective, and easy-to-make, cleaning solutions to get your screen sparkling again. Time to choose your own adventure.

Dish soap. Never doubt the power of a little dish soap (we always reach for Dawn, but you do you) to bring about big changes. Grab a bowl, and dilute one teaspoon of dish soap for every two cups of water. Soak a soft cloth in the solution, wring it out until it’s nearly dry, and you’re ready to get that screen shining once again.

Vinegar. Is there anything vinegar can’t do? It’s even good for screens. Mix 1 part white vinegar with 1 part distilled water. Put it into a spray bottle and grab your microfiber cloth. It’s about time to get that screen taken care of.

Isopropyl alcohol. For the cleaning power of vinegar without the temporary smell, look no further than rubbing alcohol. Just make sure to check the label. You want a product with 70% isopropyl (likely rubbing alcohol) and no ethyl, as this can cause serious damage to your screen. Create your cleaning solution by mixing 4 parts distilled water with 1 part alcohol. Get into a spray bottle, and you’re ready to go.

Power down. Start by turning your TV off—it’ll be easier to spot smudges, smears, and residue that way. Do a quick spot check before you move on, and identify your trouble areas.

Deal with dust. It doesn’t matter how often you clean your house: there will be dust, and it will inevitably be drawn to your TV. Run a Swiffer Duster over the screen to get the dust out of the way without also spreading it around. Don’t forget to address the outer edges and rims of the TV as well. Dust is the last thing you want clogging up your speakers, ports, and connections.

Spray the cloth. Third time mentioning this is a charm, right? Spray your cleaning solution onto a clean microfiber cloth (and not the screen). You want the cloth to be just barely dampened; if you squeeze the cloth, no liquid should come out. Move the cloth gently in circular motions until you’ve cleaned the entire surface. Wipe thoroughly, so that no moisture remains on the surface or runs down into the edges.

Wait before you watch. Before turning the TV back on, allow it to air dry completely. Do one last spot check, and re-address any persistent smudges that might have survived cleaning round 1.

That’s it! With these tips of the trade, you’ll soon be lost once more in your favorite TV series or movie, no smudges or smears to distract you. Remember to keep a bottle of whatever solution you made at the ready—they can be great for battling smudgy computer screens, eyeglasses, phones, and tablets as well.

how do i clean my lcd screen factory

LCD Screen Cleaner works on all screens and monitors without leaving any residue. Contains plant-based cleaning agents which safely remove smudges and fingerprints from all your electronic devices. Simply spray and wipe with a microfiber cloth. Alcohol-free, ammonia-free, and streak-free!

how do i clean my lcd screen factory

Isopropyl Alcohol is commonly found as rubbing alcohol in the grocery store, usually in a 70% isopropyl alcohol 30% distilled water mix; there is no need to dilute it when it comes that way. Some stores may sell 100% isopropyl alcohol which should be diluted. Something about the 70/30 mix causes the alcohol to evaporate away in the most efficient manner, so it"s better to do that than a 50/50 mix.

Isopropyl alcohol should be used only when distilled water won"t do the job, because repeated applications can eventually damage more delicate finishes.

Solutions that eyeglasses stores sell to clean glasses should certainly be safe for monitors, for finishes on glasses can be even more delicate. They are a good place to find the microfiber cloths which really are the best material for the job.

Windex and other ammonia-based cleaners should never be used; they WILL ruin your monitor, staining the finish a yellow color that can"t ever be removed.