s900 lcd display settings factory

When doing my research on what controller was ideal for my ebike, I thought, should I get a very simple controller or a more sophisticated but complex LCD display that can give me more riding features?

Even though you can see only six (6) main readings on the display, there is fourteen (14) usable functions you can access and adjust based on your needs.

Po2 – Km or miles per hour: depending on your location, you can select to display the speed in km (“0” ) or mph (“1”). For this to work properly, you need to set the size of your ebike wheels.

Po4 – Display sleep mode:this come from zero to 60 mins. In this case, zero means your controller will stay on all the time and if 60 mins, it will shut down after 1 hr of no operation (this will not happen if you are riding your electric bike though).

P06 – Wheel size selection: this is where you establish the size of your wheels in inchs. This is important in order to display the right speed you are traveling.

When something is not working well with your electric bike, the SW900 LCD can inform you about the issue or system errors. This is what you need to know:

I believe the SW900 LCD is one of the most functional controller for e-bikes in the market but from my perspective, if you don’t want to have to much of a headache, just stay away from it and install a most simple one, like the ones provided by Bosch.

3-you will find your current setting appears on the screen and it will be blinking  use the function button in the middle to cycle all the settings then hold again the up & down button to enter the parameter settings

C10: The factory reset settings (this with the reset the whole settings to the factory reset) if you want to reset all the settings all you need to do is to choose Y and Save it.