ce certification lcd panel manufacturer

What are the criteria and procedure for CE marking of LCDs and which institutions can I contact? A liquid crystal display is a kind of flat panel display. It is used for the screen display of televisions and computers. The advantages of this display are low power consumption, small size, and low radiation. The LCD uses a liquid crystal solution in two polarized materials, so the current flowing through the liquid causes the crystals to rearrange themselves to achieve the purpose of the image. If you need to apply for CE certification, you can contact our company BEST ONE Inspection for the procedure.

CE marking provides a single technical specification for products from all countries for trade in the European market and simplifies trade procedures. In order to enter the European Union and the European Free Trade Area, products from all countries must be CE certified and have the CE mark on the product. CE marking is therefore the passport for products to enter the EU and EFTA markets.

CE certification means that the product meets the safety requirements set out in the EU Directive; it is a company’s commitment to consumers and increases their confidence in the product; products bearing the CE mark reduce the risk of being sold on the European market.

CE consists of EMC (Electromagnetic Compatibility) + LVD (Low Voltage Directive), EMC also includes EMI (interference) + EMC (anti-interference), LVD is also commonly known as SAFETY safety, general low voltage products AC less than 50V, DC less than 75V can not LVD project. Low voltage products only need to test EMC and issue CE-EMC certificate, high voltage products need to test EMC and LVD and issue two certificates and reports CE-EMCCE-LVD.

Safety design documents (including main design drawings, i.e. design drawings indicating creepage distance, clearance distance, number and thickness of insulation layers).

the certificate of registration of the product in the EU (for certain products, such as Class I medical devices, general IVD in vitro diagnostic devices).

EU laws, regulations, and harmonized standards are not only numerous but also very complex, so seeking the help of an EU notified body is a wise move to save time and effort and reduce risks.

CE Certification is a mandatory marking that indicates conformity in accordance with the legal and technical directives of the European Union (EU). CE has been in effect since 1993 and is not necessarily a marking of quality but the CE Certification is known as a ‘passport’ for EU-wide free flow for a wide range of industrial products.

The CE Mark certifies that a variety of products have met the relevant environmental, health and safety requirements of the European Union, and therefore ensures safety for consumers and the workplace.

In order for manufacturers to market their products in the EU and abroad, products must meet the relevant CE mark requirements. Once the CE mark has been approved, the products can be marketed within the EU without having to undertake further tests and modifications for each country.

Underwriters Laboratories does not necessarily approve products as opposed to evaluating materials, systems, components and products for the relevant compliance to the UL requirements. In order to carry a UL certification mark, the products must remain compliant with the standards set by UL.

UL and ULC ensures that companies supply safer products to the US, Canadian and global markets. The certification also improves the safety of products, as well as increases consumer confidence in their compliance and is regarded as a trusted symbol of safety.

RoHS (Restriction of Hazardous Substances) is an EU Directive that relates to electrical and electronic equipment placed on the European market. The RoHS Directive is closely linked with WEEE Care (the Waste Electrical and Electronic Equipment Directive), which controls the collection and recycling of electrical and electronic equipment in order to solve the problem of toxic waste.

RoHS aims at reducing hazardous substances being utilised in electrical and electronic equipment, while WEEE Care aims at reducing electrical and electronic equipment in products entering waste.

RoHS certification states that from 1 July 2006, electrical and electronic equipment that is put on the market cannot exceed maximum values of any of the following six substances.

The RoHS Directive applies to those who manufacture Electrical and Electronic Equipment (EEE), those who import these goods into the EU; those who export to other Member States; and those who re-brand equipment produced by others.

The primary aim of WEEE Care is to control the Waste of Electrical and Electronic Equipment and to recover and re-cycle such waste in order to reduce the volumes of electrical and electronic waste being disposed to landfill. WEEE Care arranges the collections and recovery of equipment to recycle in an environmentally friendly way. WEEE Care is a European environmental directive that aims to reduce the impact of disposing of electrical and electronic equipment in the environment.

The RoHS directive bans certain levels of substances being used in electrical and electronic equipment and WEEE Care aims at the correct disposal of this equipment.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

A: All of our TFT LCDs meet or exceed 130 degree (Horizontal) and 110 degree (Vertical) viewing angle. Our wide view film technology achieve viewing angle 160 degree (Horizontal) and 140 degree(Vertical). We also have Super-Wide-View technology that will achieve 85/85/85/85 viewing angle, which is the best technology for viewing angle and color reproduction. Please consult the individual part specification for details.

A: NCM enables vivid reproduction of even the most subtle colors, such as pastels and flesh tones, and provides independent control of six colors without one color influencing any of the others. It supports 18-bit and 24-bit color and full motion video and compensates for any color shifts caused by LCD components such as CCFLs and optical films. Read the NCM Technology WhitePaper.

A: There are basically two approches to increase a display"s sunlight readability: increase the brightness level of the display, or reduce the ambient light reflection on the display surface. Good Display has several technology for outdoor readable applications, such as high brightness panel, transflective panel, anti-reflection and antiglare surface treatment, for more information, please check Outdoor Use TFT Displays for more information.

A: Yes. Good Display TFT LCDs response time is between 16ms to 25ms. Most of our newly developed LCD panels have 16ms response time, which is enough for moving picture. Please check the individual display specification for detail information.

A: LCD displays typically feature a wider viewing angle from straight on or above, compared to the viewing angle from below. The reverse-scan feature enables customers to select either a normal scan or reverse scan to obtain the best intended image, depending on whether the mounted display will be viewed typically from above or below. Good Display TFT LCDs have reverse scan function.

A: The defination of the CCFL lifetime is when the brightness level droped to 50% of its initial full brightness level. All the CCFL backlights for TFT LCDs are rated at 50,000 hours minimum. But most of the CCFL lamp unit can be replaced easily.

A: For industrial grade LED backlits TFT-LCD, the minimum lifetime is 60K hours. Be sure to consult the individual part specification for information on a specific LCM.

A: Many of the Good Display TFT LCDs operate at both 3.3 and 5V. However, as the 3.3V becomes the new standard, the LSI manufactory might decide to only support 3.3V, that is not controlled by Good Display. Please check the individual part specification for information.

A: The Mean time between failures (MTBF) data is not generally available. Under special circumstances MTBF data can be provided, but this is the exception, not the norm. Please contact your representative for further information.

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for Interactive Led Wall,3d Advertising Display,P3.91 Indoor Led Display,Perimeter Led Display Screen,Led Wall.Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements. The product will supply to all over the world, such as Europe, America, Australia, Hyderabad ,Turkmenistan ,Vancouver ,Really should any of these items be of interest to you, please let us know. We will be pleased to give you a quotation upon receipt of one"s detailed specifications. We"ve our personal specialist R&D enginners to meet any of the requriements, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.

i-Tech customer service reps are here to help you with your inquiry for Industrial monitors, panel pc, and outdoor LCD. From any general questions to technical support, we leave you feeling completely satisfied with our excellent LCD quality as well.

We have recently upgraded our product certification. We have conducted CE,FCC and ROHS certification for the latest certification standards for our Interactive LCD Digital Display and All in one kiosk and Stretched displays. The certification details as following:

A Machinery shall be CE Marked before it is placed on the market or put into service or use. Normally a Machinery has an Electrical Equipment made of one or more control panels and components “in the field”.

The Control panel is often engineered and manufactured by a different producer then the machinery itself and it falls under the Low Voltage Directive 2014/35/EU (if powered above 50Vac).

That was interpreted in the following way: Manufacturer P of the control Panel sells to Manufacturer M of the Machinery and is not obliged to CE Mark its product.

In other terms: manufacturer “P1” of a part of the control panel sells it to the final manufacturer “P2”, who assembles the product and sells it to “M”. P2 has to CE mark the product before it is transferred to “M”.

As for “making available”, the concept of placing on the market refers to each individual product, not to a type of product, and whether it was manufactured as an individual unit or in series.

Not all experts think that way.There is a school of thought that strasses the fact that there is no specific product standard for Industrial Control panels in Europe: therefore the product cannot be CE Marked. The only way to support that reasoning is to demostrate the ICP is not a product falling under the Low Voltage Directive, in other termsit is not an Electrical Equipment. Here the definition taken from the Guide to the LVD:

Electrical Equipment: item used for such purposes as generation, conversion, transmission, distribution or utilisation of electrical energy, such as machines, transformers, switchgear and controlgear, measuring instruments, protective devices, wiring material, current-using equipment.

Nobody argues a swichgear must be CE Market - it actually has a product standard: EN 61439-1. Than, what is the difference between a Distribution Panel and an Industrial Control Panel? An ICP is not an Electrical Equipment, falling under the LVD, because it does not have a specific product standard? We consider that reasoning "weak".

A Machinery shall be CE Marked before it is placed on the market or put into service or use. Normally a Machinery has an Electrical Equipment made of one or more control panels and components “in the field”.

The Control panel is often engineered and manufactured by a different producer then the machinery itself and it falls under the Low Voltage Directive 2014/35/EU (if powered above 50Vac).

That was interpreted in the following way: Manufacturer P of the control Panel sells to Manufacturer M of the Machinery and is not obliged to CE Mark its product.

In other terms: manufacturer “P1” of a part of the control panel sells it to the final manufacturer “P2”, who assembles the product and sells it to “M”. P2 has to CE mark the product before it is transferred to “M”.

As for “making available”, the concept of placing on the market refers to each individual product, not to a type of product, and whether it was manufactured as an individual unit or in series.

Not all experts think that way.There is a school of thought that strasses the fact that there is no specific product standard for Industrial Control panels in Europe: therefore the product cannot be CE Marked. The only way to support that reasoning is to demostrate the ICP is not a product falling under the Low Voltage Directive, in other termsit is not an Electrical Equipment. Here the definition taken from the Guide to the LVD:

Electrical Equipment: item used for such purposes as generation, conversion, transmission, distribution or utilisation of electrical energy, such as machines, transformers, switchgear and controlgear, measuring instruments, protective devices, wiring material, current-using equipment.

Nobody argues a swichgear must be CE Market - it actually has a product standard: EN 61439-1. Than, what is the difference between a Distribution Panel and an Industrial Control Panel? An ICP is not an Electrical Equipment, falling under the LVD, because it does not have a specific product standard? We consider that reasoning "weak".

Let iCertifi help you with your CE approvals. Since we are a consulting firm, we offer a different approach to homologations.  Since we are not a test laboratory, we have partnerships with several test laboratories worldwide.  We will negotiate the pricing from multiple test labs to ensure you obtain the best pricing possible.  Since we are not tied to a single laboratory, we can also find laboratories with the best completion time. This allows you to obtain your certifications much faster which will allow your time to market to be expedited.

We have helped many companies become certified to sell their products in the European Union. Our experience in accordance with CE norms and our international partnerships with laboratories  and regulators allows you to engage a single company for all your International Market Access (IMA) needs.

Product manufacturers needed to display the CE mark(stamp) on their product. The process of getting a CE mark(stamp) may seem vague.  An outline of the process is as follows:

Distributors of products requiring CE marking should be inspected to ensure that this brand is present and properly positioned in the items. Distributors must also examine the accompanying documentation to ensure that the CE mark is obtained legally and correctly.

If you are a merchant for a product that is distributed in the European Economic Area, please contact us for professional certification services. We can help you to ensure that your products are on a legal level of safety, a level of health and environmental protection.

Postal stamps are established in accordance with the EC directives. This Directive is a legal act of the European Union (EU). The EU has established product codes for many industries in 1985. These standards are standards of health, safety and environmental protection.

Presently, set standards and legal standards are managed by two separate entities. While the European Union has established compliance with CE rules, you do not have to go through the EU. Instead, compliance can be applied in different ways.

1. Each distribution company has the opportunity to check the compliance efforts of their manufacturers. If the distributor checks their client’production, the manufacturer of the product must provide evidence of their CE mark.

iCertifi can assist you with  your CE certification which often is the first step in International Market Access.  If your ambitions are to sell your products globally, iCertifi can assist you with this process as well.  We are proficient in certifications such as; CE, FCC, Industry Canada (IC), safety type approval (CB Scheme, IRAM S-Mark), Energy Efficiency such as CONUEE in Mexico and more.  iCertifi can also provide you with local applicant services in any country you wish to penetrate.  Let us help you eliminate the burdens to International Market Access. Contact us at (541) 275-5020 to get started on your CE certification.

CE Certificate of Compliance allows products to move freely and sell on the European market. This brand offers consumers proof that the product meets the environment, health and safety standard set by the EEA. Performance requirements are not a guarantee of quality. This simply means that the product fulfills the conditions for sale in the EU.

It is important to note that the CE marking does not mean that the product is made in the EEA. The European conformity marking indicates that it has reviewed, approved and pass the environment, safety and health that the EEA has established for a product to be sold in the EEA.

The CE mark is a mandatory conformity mark on many products sold in the single market European Economic Area (EEA). The CE mark certifies that a product has met EU consumer safety, health, or environmental requirements.

By affixing the CE marking to a product, a manufacturer declares, on his sole responsibility, that the product meets all the legal requirements for the CE marking, which means that the product can be sold throughout the European Economic Area (EEA, the 27 Member States of the EU and European Free Trade Association (EFTA) countries Iceland, Norway, Liechtenstein). This also applies to products made in other countries which are sold in the EEA.

The CE mark is a declaration by Hope Industrial that the product conforms with applicable requirements set out in EU law necessary before applying the mark. In order for an industrial monitor or related product to display the CE mark, Hope Industrial products have met some or all of the following Directives:EC-DirectiveSubjectDocument No.Low Voltage DirectiveProducts with a voltage rating of 50-1000 VAC or 75-1500 VDC2014/35/EU

Electromagnetic Compatibility (EMC) DirectiveApparatus liable to cause electromagnetic disturbance or which is liable to be affected by such disturbance2014/30/EU

More information on CE marking requirements is available directly from the European Commission, including "The Blue Guide," which provides detailed information.

RoHS Directive 2011/65/EU (Restriction of Hazardous Substances) is an included requirement for displaying a CE mark and restricts the use of some hazardous substances in electronics and electrical equipment sold in Europe. The Directive bans selling new products that contain more than specified levels of the following materials in the EU market: lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.

RoHS Directive 2015/863/EU amends the directive above and adds four additional substances, Bis(2-Ethylhexyl) phthalate (DEHP), Benzyl butyl phthalate (BBP), Dibutyl phthalate (DBP), Diisobutyl phthalate (DIBP).

RoHS-compliant parts must have less than or equal a maximum concentration of 0.1% (by weight) of lead, hexavalent chromium, mercury, PBB, PBDE, DEHP, BBP, DBP, DIBP and 0.01% for cadmium, unless the parts qualify for an exemption.

We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients for Lcd Bar, Small Lcd Monitor, Touch Screen Computer, Lcd Monitor,Customize Ips Lcd Module. The concept of our corporation is "Sincerity, Speed, Services, and Satisfaction". We"re going to follow this concept and gain more and far more customers" pleasure. The product will supply to all over the world, such as Europe, America, Australia,Boston, Washington,Amman, United States.Besides there are also professional production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable products quality, increase customers" satisfaction and achieve win-win situation .

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Tft Lcd Touch Screen Display, Graphic Lcd Module, Interactive Display, Industrial Touch Screen Monitor,Transparent Lcd Screen. We warmly welcome all standpoint inquiries from home and abroad to cooperate with us, and anticipate your correspondence. The product will supply to all over the world, such as Europe, America, Australia,India, French,Ukraine, El Salvador.We sincerely hope to cooperate with customers all over the world, if you would like to have more information, please kindly contact us, we are looking forward to building up a great business relationship with you.