lcd touch screen crack screen surface pro 3 factory

i’ve just changed my screen with mixed results. I tried to remove the cracked screen in case it turned out to be something other than v1.1. in fact I ended up chipping off hundreds of shards around the edges until it finally came out. It was a 1.1, hooray! So then I plugged in the replacement and it works great, but I’m afraid to tape it in permanently because I damaged all three antennae which I didn’t anticipate being buried in the adhesive along the top edge. As I was chipping glass and peeling pieces out I didn’t realize those were prices of the antennae I was tearing out. Wi-Fi speed test runs fine in my shop where I’m close to the access point. I‘m trying to decide whether to order the antennae to replace just in case. I’l need those tiny torx drivers to remove screws.

We have investigated claims of screen cracking on Surface Laptop 3 and have determined that, in a very small percentage of cases, a hard foreign particle may cause a hairline fracture in the glass that may seem to appear unexpectedly or without visible cause.

If you believe your Surface Laptop 3 is experiencing this issue, you are encouraged to contact our Microsoft Support to initiate a repair free of charge during the warranty period of the device.

If you have previously paid Microsoft for a Surface Laptop 3 repair that you believe experienced this issue, please contact Microsoft Support to learn about reimbursement.

Important:Surface devices shipped in for service can"t be repaired and must be replaced. We highly recommend that you back up your data if you can do so. We won"t be able to recover it for you.

If you’re able to turn on your Surface; be sure to save any important files and info from your Surface to another computer, drive, or cloud storage service like OneDrive. For more info, see How to prepare your Surface for service.

Without Microsoft Complete: If your device doesn"t have Microsoft Complete or Microsoft Complete has expired, see How much does out-of-warranty service cost for your Surface device or accessory? to determine the cost to replace your device.

With Microsoft Complete: For a Surface that is still within the covered warranty period, you can use one of your accidental damage claims to replace your Surface for a deductible fee (see table). Microsoft Complete is not available in all regions.

This repair service will fix the cracked glass screen or LCD on your Surface Pro 3. Any Surface Pro 3 model is compatible with this repair regardless of internal configuration because the screen and LCD assembly is the same for all variants. This repair will also fix issues related to the touchscreen after cracking the glass. This is because the digitizer which is responsible for touch will also get replaced during this repair. Microsoft has packed in a 12" 2,160 x 1,440 display into the Surface Pro 3 (SP3). Cracks in the screen from a drop can get in the way of viewing the picture, writing, or worst may actually hurt you if a rogue piece of glass gets stuck in your finger. There also may be a damaged image or no image at all if the LCD is broken. This screen repair will fix the shattered glass screen, digitizer and LCD all at the same time. However, it will not replace the back housing or chassis. Sometimes damage from a drop can also damage the back casing the display sits in. Normally we can repair small bends at no additional cost and often it"s necessary to get the display to fit. However for larger bends don"t hesitate to send us a picture for consideration.

Simply buy the repair using a credit card or PayPal using the "Buy Now" button above, ship your Surface Pro 3 to us, and we"ll take care of the rest! Most devices get fixed the same day they arrive. We also cover return shipping to you for free via standard shipping. If you need expedited 2-day return shipping, you have that option above for an additional fee.

This Surface Pro repair typically takes 1-2 hours. Feel free to come to our physical store in Mission Viejo if you are close by. Just call to schedule an appointment. We can also come out to you for no additional cost in any Orange County city such as Irvine, Orange, Newport Beach and Aliso Viejo. All we need is flat surface to work on and a power outlet nearby.

Connect your Surface Pro 3 to a monitor or TV using the DisplayPort. You may need a DisplayPort adapter if your external monitor doesn"t have a DisplayPort input.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

You’re seeing this ad based on the product’s relevance to your search query. If you are a seller and want to participate in this program click here to learn more.

Use a Surface Pro 3 screen replacement to fix up a tablet that is out of order. Stock up and stay prepared for quick and simple repairs in a shop when a client has an unresponsive Surface Pro 3. Each LCD touch screen replacement is easy to install and will work just as well as the original part. Put it in to provide high responsiveness and great image quality.

An LED backlight helps keep the Surface Pro 3 screen replacement nice and bright for easy viewing at any time of day. Each unit includes a digitizer assembly that is needed to detect each touch on the screen. When installed, the Surface Pro LCD screen and digitizer will allow the user to control every tablet function with their fingers. No other input device is needed.

Search for an LCD touch screen replacement at Alibaba.com and get great deals on bulk shipping. Some suppliers can alter the size and resolution, allowing the part to be used in other tablet models. Vendors always use protective packaging to keep the Surface Pro 3 screen repair hardware safe during transit. Inspectors carefully check each part to ensure it will fit properly and work without any issues after installation.

Get a faulty device back in working order with a Surface Pro 3 screen replacement from Alibaba.com. Make any work in an electronics store or a repair shop easy and cheap. Use several replacements to refurbish a shipment of tablets for resale in a store.

If you have a damaged LCD display or touch glass on your Microsoft Surface Pro 3 , this is the part you need to make your device fully functional again.

Have you seen our entire product portfolio and didn´t found a spare part suitable for your device Microsoft Surface Pro 3  ? Or do you have any additional questions? Do not hesitate to contact us in any matter by e-mail at info@fixshop.eu or by phone +4212/22133399.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Cracked or broken mobile device screens can be costly to fix, but a few inexpensive do-it-yourself strategies can eliminate a repair shop visit and salvage your tablet or phone.

Third-party repair shops typically replace glass on a tablet for about US$100-$200, depending on the model. Replacing the tablet’s touchscreen can cost $50-$75 extra.

Replacing the cracked glass with a functioning touchscreen is much cheaper. You usually can find suppliers online for $6 to $20 for a phone. A tablet replacement digitizer can cost about $50 or more if you perform the work.

It is first things first when it comes to fixing cracks on a smartphone’s screen. Often, the actual screen is not cracked at all. You may have installed a glass screen protector when you purchased the phone.

The film covers can become cloudy or scratched. They usually help absorb shock from items dropping on the tablet to lessen risk of cracking the touchscreen glass under it.

When the culprit really is a damaged screen, choosing one of the next three approaches can help you solve the problem. You might be able to repair the damage rather than replace it.

For instance, is the screen clouded or otherwise damaged from your mistaken use of harsh cleaning fluids or coarse paper towels to clean the screen? If so, there is a fix for that.

Is the screen merely cracked or full-out broken — as in massive spider cracks from being smashed? You can cure a cracked screen on a phone or tablet more easily with Sugru, a commercial product. A fully cracked screen on either type of device is a solid candidate for a screen replacement.

If your phone or tablet screen shows signs of cleaning abuse or wear from heavy handling, return its condition to nearly new with an oleophobic coating kit. This is an oil-repellent coating that protects the screen, along with adding smoothness and reducing fingerprints.

Prepare a wiping finger. The oleophobic coating’s liquid solvent evaporates very quickly when applied, so once you start, work quickly. Wrap one finger with plastic wrap or a sandwich bag. Use this finger to rub the coating liquid onto the screen.

Apply 10-15 drops of the coating to the screen’s surface. If the phone or tablet screen has a large surface, apply 10 drops to a portion of the screen, working on one portion at a time.

Wipe the screen dry with a clean microfiber cloth. Then give the coating time to dry. Do not touch the screen for 8-12 hours to allow the coating to bond to the surface.

If your only complaint involves tiny scratches and cracks on a smartphone screen or a tablet glass, there are remedies that work with varying degrees of reliability. You can use a household eraser pad or an actual pencil eraser.

Does using toothpaste to fill in the cracks really work? I put that fix in the category of more “mythful” thinking, but I know people who swear that this method is a cheap fix that works.

Sugru is a moldable glue kit for repairing rather than replacing cracked screens. Actually, the product was not created with phone and tablet repairs in mind. Its intended purpose is more in the line of general repairs where bonding surfaces together and filling surfaces are needed.

Depending on how badly the screen is damaged, it can be a good solution for cracks that spread from the phone or tablet screen’s edges. However, for massive cracks that spread over the entire screen — as spider cracks tend to do over time — it will be a short-term fix at best.

If your phone or tablet screen has suffered more serious damage, full scale surgery is the only option other than getting a new device. Repairing the device’s LCD screen is a complicated procedure due to the compact internal design.

The repair process involves completely dismantling the phone or tablet’s outer casing. It is particularly easy if the replacement screen comes with a top frame.

Otherwise, you may have to seal the layers to avoid loss of structural strength and moisture/dust protection. You can use either sealing pads for the size of the particular device at hand or double-sided sticky tape. A simpler solution for phone screen replacement is to use B-7000/T-7000 glue.

The first step is to tear down the device so you can assess the extent of the damage and determine what screen parts to order. Locate the model number for the LCD screen. Use this number in an Internet search to find a replacement screen.

The part or model number usually is printed on a label adhered to the sensor cable attached to the screen. You can access this cable after you separate the screen from the rest of the unit. Carefully disconnect the cable connector from the backside of the screen along the edge.

Step 3: Unscrew the Phillips or Torx screws that hold the motherboard-containing back frame to the LCD-containing chassis and place the screws in a bowl for safe-keeping. Then separate the back frame from the chassis by gently and carefully pulling the two apart.

Step 4: Remove any further cable assemblies that have become exposed by the separation of parts. Maintain visual cues as to which cable to reattach where. For example, place them on the work surface face-up in the order of removal. Or take photos with a digital camera or smartphone.

Step 5: Remove the LCD-containing chassis from the front frame or bezel and glass assembly by unscrewing a second batch of screws. Store the second set of screws in a second bowl. Remove any further parts such as the camera.

Step 6: Don’t touch the LCD face. Separate the existing, damaged glass from the bezel or front frame by waving the heat gun over the adhesive join and pulling apart. Wear gloves here because the process involves further breaking the glass.

Step 2: Look for any foam padding or seals and reattach. Do not touch the inside of the glass. You won’t be able to get rid of the fingerprints after assembly.

Step 3: Thread the digitizer cable and remount the new digitizer glass to the bezel by firmly pressing it into place. Then remove any dust from the LCD and glass with canned air.

Replacing damaged touchscreens and digitizer panels is not rocket science, but the process does require careful attention to details. Following visual guides and screenshots can make the difference between initial success and having to make second or third efforts.