how to remove glue from lcd screen in stock

I found that paint thinner on a Q-Tip made the built up glue soft and easier to scrape off using the small flat blade screw diver that came with my new battery and touch screen, but it wasn’t safe to use on the plastic parts, only the aluminium. So, being a mechanic, I tried using several cleaners that we use in automotives. CRC CO Contact Cleaner worked just as well at softening the old tape and glue as paint thinner, but is safe on plastics. I sprayed some into a cup and used a bunch of Q-Tips, and it worked well but the contact cleaner evaporated too quickly. I then found something that works super. It is called Perfects Contact Cleaner, and it is designed to work in the Tropics where I live. While dissolving the glue, it also protects against rust and corrosion while drying colourless and with no residue. It improves electrical conductivity, cleans, and removes aluminium corrosion. Again, I sprayed some into a cup and used Q-Tips. I still had to scrape a little to remove the goo from the notch in the plastic surround, but it was easy to remove the glue, and the residue from the battery stickum came off pretty easy by spraying the cleaner on a paper towel and leaving it on the glue for about 15 minutes. Now it looks like new.

The exact same thing just happened to me with my Canon 5D MKII. Your photo looks almost identical to my situation. I tried water, isopropyl alcohol (70%) and even acetone with absolutely no effect. What ended up working was Goof Off and a lot of elbow grease. I applied the Goof Off to a cotton ball  and rubbed vigorously. This didn"t remove the adhesive but it softened it up enough so I could scratch it away a little bit at a time with my fingernail. It took a good hour or so and about a half dozen Goof Off soaked cotton balls but in the end I got all of the adhesive  off without any damage to the lcd screen. It looks like nothing ever happened. I was very concerned that the Goof Off might damage the screen (or even the camera body) but I was desperate. If it didn"t  work or caused damage, I figured I would have to send it in to Canon to have the screen replaced. Luckily, it all worked out. Like I said, like nothing ever happened.  Just thought I would share.

Things like price stickers and labels, different types of tape (packing, masking, scotch tape) can leave behind a sticky, gooey residue that’s a tricky mess to remove. That old screen protector that you just removed from you device’s screen also leaves behind sticky residue.

The sticky residue that is left behind can collect dirt and quickly become a dark, sticky area that takes away from the attractiveness of the new piece.

The most obvious solution, but the most widely used. If it’s really sticky, skip this method as you’ll just make it worse. If not, try to “ball-up” the residue with your fingers and wiping the surface with a wet cloth.

Soak a washcloth or rag in a mixture of vinegar and water (a bit more vinegar than water), then use the cloth to apply the mixture to your label or sticky area. Let the mixture sit on the area for a few minutes so it has time to dissolve the glue. The glue should rub off easily, taking the sticky residue with it.

That bottle of Romanov you’ve been eyeing in your dad’s closet, yes that one, can be used to remove adhesive residue as well. Avoid using any sweet or flavored alcohols, as these will introduce more stickiness from the sugar content.

Dab a little alcohol onto a paper towel or soft cleaning rag, and lay the moistened area of the paper or rag over the sticky stain. Let sit for a few minutes to be absorbed by the stain.

Rub the petroleum jelly directly onto the sticker glue residue. Allow it to remain on the residue for a few hours. Scrape off the petroleum jelly, along with the glue, using a credit card or any other flat plastic surface.

A high percentage concentration of Isopropyl Alcohol might work to soften up the glue enough to scrape it off with your fingernail, but you"ll need to leave it on the spot for awhile. I suggest using a Q-Tip soaked in 90% Isopropyl Alcohol to avoid exposing the TV screen itself to the alcohol as much as possible. Let it sit there for a minute or two, and then attempt to scrape it off while it"s still soft.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Afghanistan, Africa, Albania, Andorra, Armenia, Austria, Azerbaijan Republic, Bangladesh, Barbados, Belarus, Belgium, Bhutan, Bolivia, Bosnia and Herzegovina, Bulgaria, Chile, China, Colombia, Dominican Republic, Ecuador, El Salvador, Estonia, Falkland Islands (Islas Malvinas), French Guiana, French Polynesia, Georgia, Grenada, Guadeloupe, Guatemala, Guyana, Haiti, Honduras, India, Jamaica, Japan, Kazakhstan, Korea, South, Kyrgyzstan, Libya, Maldives, Martinique, Mexico, Mongolia, Nepal, New Caledonia, Nicaragua, Pakistan, Panama, Paraguay, Peru, Reunion, Russian Federation, Sri Lanka, Suriname, Tajikistan, Turkmenistan, Ukraine, Uzbekistan, Venezuela

The most common type of adhesive on phone screens is tempered glass glue. At times, you can also get super glue to fall on it when you repair household appliances.

If you do not turn off the screen, it is quite difficult to detect the glue stains. Moreover, this step will help you avoid making random calls or sending random messages.

Pour a little oil into a small bowl. Then, take the cloth dipped in this solution and apply it to the glued area. It would be best not to soak too much because cooking oil can spill into the charging port or speaker.

Don’t worry! Cooking oil is completely safe with your device. Moreover, compared to other removers, oil works much better in loosening the adhesive residue.

Rub the surface with the pointer finger until residue peels off. After adhesive completely comes away, take another lint-free cloth to wipe off the screen. Keep cleaning until the area is fresh and dry.

Apply an adequate amount of glue remover to the area. Do not use bare hands but brush applicator instead. While wiping off, make sure remover won’t flow into other parts of the phone.

We have shared with you the best ways on how to remove glue from phone screen. In this way, you can easily eradicate leftover adhesive from your device.

By continuing to use AliExpress you accept our use of cookies (view more on our Privacy Policy). You can adjust your Cookie Preferences at the bottom of this page.