tft display with serial interface for sale

The μLCD43(GFX) is an intelligent graphics display that harnesses the power of Active Matrix LCD (TFT) technology to deliver a diverse range of features in a single, compact cost effective unit. Embedded at the heart of the design is the PICASO-GFX2 processor.

The PICASO-GFX2 belongs to a family of processors powered by a highly optimised soft core virtual engine, E.V.E. (Extensible Virtual Engine). EVE is a proprietary, high performance virtual processor with an extensive byte-code instruction set optimised to execute compiled 4DGL programs. 4DGL (4D Graphics Language) was specifically developed from ground up for the EVE engine core. It is a high level language which is easy to learn and simple to understand yet powerful enough to tackle many embedded graphics applications.

4DGL allows the developer to write applications in a high level syntax similar to popular languages such as BASIC, C and Pascal and run it directly on the PICASO-GFX2 processor embedded in the uLCD-43 module. It allows the user to take complete control of all available resources on that hardware platform such as the Serial Ports, Graphics LCD Display, uSD memory card, I/O pins, etc. This eliminates the need for an external host controller/processor to drive the uLCD-43 module via serial commands. It provides the user complete control over the hardware module allowing them to quickly develop powerful applications.

A wide variety of tft display serial interface options are available to you, You can also choose from tft, ips and standard tft display serial interface,

As the first in the world we do provide TFT displays with 3.2", 4.3" and 7", which are immediately running and do provide from the first minute the full functionality. These displays do require a single supply 5V= (EA eDIPTFT32: 5V= or 3.3V=) and an interface RS-232, I²C or SPI only.

Such as the touch key, bargraph, area, picture, animation, centered strings... are already built-in. You can therefore create the screen layout you want with just a few, easily understood commands. All the commands are based on coordinate specifications and can therefore be applied and moved to the nearest pixel.

Like all EA DIP modules, the EA eDIPTFT displays are simply inserted in the PCB and soldered in place. No screws, distance sleeves or cables are required, thus saves material cost and simplifies construction. This results in a saving of between 2 and 4 minutes per module during assembly!

For a standard screw mounting (e.g. together with the optional mounting bezel), the displays do come with 2 additional mounting clips for easy screw mounting.Communication via serial interface (RS-232, I²C, SPI)

Additionally to the well-proved versions with a resistive touch panel currently we do provide 2 displays with 4.3" and 7" alternatively equipped with a capacitive touch panel: EA eDIPTFT43-ATC (4.3") and EA eDIPTFT70-ATC (7").

The advantage is more transperency that leads for both sizes to again more brightness and a very contrasty display. The surface is made of glass which is hard profen against scratch, it is hygienic and resistant against all cleaning stuff. The design with its black frame grants your equipment a valuable, modern optic.

An essential detail with industrial applications ist the usability with and without hand gloves. Even when the display is put behind a 3mm glass plate it may be operated perfectly.Technology

With an extended standard temperature range of -20..+70 °C, rapid response times are guaranteed down to -20 °C. Even the essential temperature compensation is already built-in. The displays are designed for +5V single-supply operation (EA eDIPTFT32-A: 3.3~5V=).Getting started