lcd touch screen digitizer frame for iphone 5g white free sample

One of the most useful features of smartphones is that they allow you to simply touch the screen to perform your operations. The screen responds to your swiping and pressing because of the digitizer that is found on the back of the screen.

A screen digitizer is a device that converts the signals received on the surface of the screen to digital signals. These digital signals reach the computer of the phone and are interpreted as certain commands.

The screen digitizer is part of the LCD screen. The digitizer is a transparent piece that is found in the middle layer over the screen and below the protective glass on the outside of the LCD screen.

The digitizer assembly consists of microscopic sensors that are put together in regular rows and columns over the whole surface of the strip. When you touch the outer glass, the sensors on the surface are activated. An electronic circuit takes the signals from it and sends them to a coordinating location inside the computer of the phone. The software interprets the signals, according to the app you access and the spots you press, to deliver results on the screen.

Although having it done by a professional may be preferable, you can replace the screen digitizer assembly yourself. Follow these steps to make the replacement:

Disassemble the device: In the case of an iPhone 5, it"s best to discharge the battery before opening the device. Turn off the phone. Remove the 3.6 mm red screws on the sides of the lightning connector. Make sure that you open up the whole screen. Use a suction cup over the home button. Place a plastic pry tool between the display and the rear case. Open up the display.

Replace the parts: If the digitizer and glass are not fused together, you can replace the digitzer yourself. LCD screens are commonly sold together with digitizers. Close the display and replace the screws. Turn on the phone and check to make sure it functions as it should.

iPhone 5 adopts A6 processor, which offers twice the performance of the A5 chip, and iOS 6, which brings tons of new features to Apple’s mobile platform.

The iPhone 5 LCD and Digitizer Touch Panel Assembly is one of the most important component parts of the iPhone 5, and also the best replacement part of your scratched, cracked and damaged screen.

iPhone 5 LCD Screen and Digitizer Assemblyis available with insufficient supply of source in the current market.However,ETrade Supplyprovides sufficient OEM Brand New iPhone 5 LCD Screen and Digitizer Assembly with Frame.

ETrade Supply has established the ISO9001 certificated QC procedure. We conduct strict cosmetic inspection and functionality tests for each iPhone 5 LCD Screen and Digitizer Assembly before package and transportation.

Please handle the flex cable ribbon on the back of iPhone 5 LCD Screen and Digitizer Assembly carefully during installing iPhone 5 LCD Screen and Digitizer Assembly. Besides, great attention should be paid to buckle the LCD Screen and Digitizer Assembly onto the motherboard since the flex cable ribbon is fragile, which will break off and influence the performance of LCD Screen and Digitizer Touch Panel because of mishandling. Please be kindly noted that ETrade Supply cannot be responsible for any possible damage caused by personal factors. In addition, any corrosive material should be kept away from this iPhone 5 LCD Screen and Digitizer Assembly with Frame, and please keep them in a dark and dry environment and do not pile them up.