macbook lcd screen broken factory

Depends on what the OP really wants I suppose. Restoring it to a factory installation seems unusual without a working monitor. And of course the Retina MacBook has a captive SSD.

macOS allows remote screen access via a local network using Bonjour, but only if you enabled Screen Sharing in the Sharing preference pane. If you might have done so, follow these steps:

With Screen Sharing enabled, if you also clicked Computer Settings and enabled a password for VNC viewers, you should also or instead be able to use standard VNC screen-sharing software from any computer on the network (including a Mac), or one that can reach the network remotely.

We’ve compiled a list of the questions we get asked most frequently along with answers and links to columns: read our super FAQ to see if your question is covered. If not, we’re always looking for new problems to solve! Email yours to mac911@macworld.comincluding screen captures as appropriate, and whether you want your full name used. Not every question will be answered, we don’t reply to email, and we cannot provide direct troubleshooting advice.

Note that depending on the speed of your computer and other factors, it may take a little while for anything to show up on the screen. Give it at least a minute if you don"t see anything at first, before assuming something didn"t work.

Black screen on MacBook Pro? It"s the situation that you hope will never happen, and when it does, it often seems to be at the worst possible time. We rate Apple"s MacBooks among the best laptops for creatives, and we"ve found them to be very reliable on the whole. But as with any laptop or desktop computer, sometimes things can go wrong.

A lack of any sign of activity on your MacBook Pro screen is perhaps one of the most worrying issues you can face when booting up your device. You"re likely to immediately start to worry about how much it will cost to fix, but let"s not panic yet. Take a deep breath, and try the tips below before you fork out for a repair or take a trip to your nearest Apple Authorised Service Provider or store.

We won"t deny that a MacBook Pro black screen can sometimes be bad news, but often it"s not actually such a big deal and can be fixed quite easily. Many of our writers and creative contributors use MacBooks day in, day out, so it"s a problem we"ve come across a few times. Below, we"ll suggest the series of steps that we usually try if we"re faced with a black screen on MacBook Pro.

A blank screen of any kind, (black, grey, or blue), will appear once or more when you startup of your device, but if your MacBook gets stuck on a blank screen, these steps may just bring it back to life, whether you"re using the laptop"s own screen or an external display. On that note, if you"re looking for a bigger screen, see our pick of the best monitors for MacBook Pro. We also have a roundup of the best MacBook Pro deals in case you decide it"s time to upgrade your laptop.

Any number of issues can cause a MacBook Pro black screen. Sometimes it can happen waking your laptop from sleep, and sometimes it can be caused by broke disk permissions or a software error. Below we"ll outline the steps to try if the problem is a black, or otherwise blank screen, on your MacBook Pro"s own display. If your problem is with an external monitor, skip to how to fix a black screen on a MacBook Pro external monitor.

OK, so you"ve probably done this, but just to be sure check the power. It can be a big relief to discover the issue is something as simple as this. If you"re running on battery, connect your laptop to its charger just in case the battery has run down. Check the power indicator light shows so you can rule out a faulty power cable. It’s also possible that you (or your cat) might have unintentionally hit the brightness keys on the keyboard at some point at that you screen is simply dimmed. Hit F2 or use the control bar to try increasing the brightness on your MacBook Pro.

If you"ve confirmed that the laptop is receiving power and you"ve ruled out the possibility of interference from peripheral devices, the next thing to try is a simple restart. Pressing Control + Command (the symbol with four loops) + Power/Eject/Touch ID button(depending on your model) should automatically restart your device. Alternatively, hold the power button for 5 seconds to shut down your MacBook Pro, wait 15 seconds and then press the button again to reboot. Fingers crossed.

Still no luck? Then try a forced reset. Sometimes a good old-fashioned hard restart is all it takes to fix all kinds of MacBook issues. On an Apple-chipped MacBook Pro (M1, M1 Pro, M1 Max), press and hold the power button for about 10 seconds. You should see the startup options window, which includes a gear icon labelled Options. Select Options and Continue. If the options window doesn"t appeal, release the power button, and press and hold it again for another 10 seconds.

On an Intel-chipped MacBook Pro, press and hold the power button for about 10 seconds, then press and release the power button and immediately press and hold Command + R until you see an Apple logo or other image. If you still see a blank screen after about 20 seconds, it"s time to move on. If this does recovers your screen, it"s worth running Disk Utility to check for errors. If Disk Utility finds errors and repair them, restart your MacBook again afterwards.

This isn"t official from Apple, but years of MacBook lore claim that a particular key sequence can sometimes revive a non-reacting blank MacBook Pro screen. Press power button once, Press "S" (the sleep hotkey), and then hold the power button to perform a hard shut down. Wait 15 seconds and press the button to restart. We have no idea why this works, but plenty of people have vouched for it.

MacBook Pro Safe Mode allows you to start you MacBook without other launch agents booting up. This can eliminate the potential for issues with other apps and services interfering and preventing your screen from displaying correctly.

To boot into Safe Mode, power off and let your MacBook Pro sit for 20 seconds. Turn it on again and immediately hold down the Shiftkey. Release the Shift key when the login window appears. You should see "Safe Boot" in the upper right corner of the window. Sometimes you may be asked to login twice, and your computer may take a longer than usual to start while it carries out diagnostics. After it"s completely booted up, you can restart again in normal startup and see if the black screen is fixed.

If that doesn"t work, it"s time to start turning to more technical solutions. NVRAM (non-volatile random-access memory) and PRAM (Parameter RAM) are small memory partitions that store settings like volume control and display resolution. Sometimes they encounter issues and require resetting. To do that, power down then hit the power button again to boot up you MacBook. Immediately hold down Option + Command + P + R at the same time while the machine boots, and keep holding them down until you hear the startup chime (around 2 seconds)

The Mac"s Systems Management Controller (SMC) controls things like temperature, keyboard, display and fans. Resetting the SMC is another possible quick fix to resolve a black screen on MacBook Pro. Turn of your MacBook and unplug it for at least 15 seconds before plugging in again. Then, with the power still off, hold down Shift + Option + Control + the power button all together. Release the keys when your MacBook starts booting up.

The steps above should help you resolve a MacBook Pro black screen, but if your laptop"s own screen is working but an external monitor is blank, there are other things to try.

It may seem obvious, but first check the power on your external monitor and then check you connections. Most MacBook Pros only offer Thunderbolt/USB-C connectors for external monitors, so if you"re using a monitor with a different connection, you"ll need to check your adapter or dock too. If you find that the external display doesn"t turn on after you connect it, try connecting your display while your MacBook is turned off, and then switch your MacBook on.

The black screen on a MacBook Pro external monitor may be caused by simply closing your laptop. By default, this automatically puts your MacBook Pro to sleep. If you want to be able to close the lid of your MacBook Pro but still use the laptop via an external monitor, you"ll need to change some settings. Go to System Preferences > Battery > Energy Saver > Power Adapter, and move the slider to Never. Note that you"ll also need to have a keyboard and either a mouse or trackpad connected to your MacBook Pro or it will still sleep on closing the lid.

If the external monitor display is still blank go to System Preferences > Displays. You can press the Alt/option key to bring up the "Detect Displays" button. Click on "Detect Displays", to prompt your MacBook Pro to recognise the external monitor. See our guide to how to connect a monitor to MacBook Pro for more details on using an external monitor and see our guide to the best dock for MacBook Pro to expand your connection options.

About: We love the Mac! TechRestore was started by a group of Mac fans and we have since performed over 50,000 repairs on PowerBooks, iBooks, MacBooks and MacBook Pro systems. We also repair iPhones and iPod Touch. L…

First released in October of 2008, the Unibody MacBook and MacBook Pro systems were the first systems that includes a glass cover installed on top of the LCD screen. There"s all kinds of arguments out there about whether this glass is a good or bad thing, but for today"s discussion we"ll skip that topic. What I want to show you is how to tell if your glass cover is broken, your LCD or both.

The most common type of screen breakage on a unibody MacBook or MacBook Pro is glass damage. The glass cover that is on top of the LCD screen usually takes the brunt of the damage and cracks with impact.

The glass cover is actually one piece of thin glass, sandwiched between two layers of plastic film. This means that when your glass breaks, little pieces typically will not fly everywhere (this is a good thing), but rather, the screen will "spider-web" with cracks showing up all over.

If your MacBook unibody glass looks OK, but your screen looks like it has ink blotches on it, chances are you have broken your LCD screen. LCD stands for Liquid Crystal Display and yes, there is liquid inside of the display, thus, those inky blotches you are seeing.

This type of damage will require removal of the glass cover and replacement of the LCD screen. In the next step, we will highlight a visual guide to help you quickly discern which type of repair you need.

If you are unlucky enough to have really hammered your MacBook or MacBook Pro unibody, then you may see spidered glass cracks, as well as inky blotches on your LCD screen. In this case, you will need to replace both the glass and the LCD screen itself.

Both the glass screen cover and LCD screen are available for self-repair and with installation. It just depends how handy you are, or who you know that might be able to help you perform the repair.

Brands like HP and Dell have inexpensive screen replacements compared to Mac. Why so? It is because MacBook’s retina display is unique. That is why the replacement is expensive. Unfortunately, if you’re carrying a broken device and not sure how much itcoststo replace a MacBook screen at the Apple Store.Then, this article will help you determine the estimated repair price with and without AppleCare.

If AppleCare backs your device, you can expect to pay $99 for a damaged, defective, or cracked MacBook screen. If there are any additional damages, you might need to pay an extra $300.

If you own a MacBook with a broken retina display screen and don’t have AppleCare. Then, expect the replacement to cost around $355 to $755 at the Apple Store.

It is sometimes puzzling to know exactly how much itcoststo replace a MacBook screen at the Apple Store. If you have AppleCare, expect replacement expenses from $99 to $300. Contrarily, non-AppleCare users should expect to spend around $455 to $755 to repair the damage.

Meta Description: If you are unsure how much itcoststo replace a MacBook screen at the Apple Store? This brief guide gives you the nearest repair charges.

Summary: A complete tutorial to fix iMac, MacBook Pro/Air that won"t turn on black screen issue. And how to save your files with iBoysoft Data Recovery in macOS Recovery Mode.

If you are facing the black screen of death issue after pressing the power on button in your Mac (MacBook Pro, MacBook Air, iMac, or Mac Mini), don"t be thrilled, even if you can"t use your Mac normally or access the data on it, it doesn"t mean the certain death of your device.

The other one is when you can perceive some response from your Mac, such as MacBook Pro shows a black screen with chime, MacBook screen goes black after a few minutes of booting, MacBook Pro screen is not working but keyboard lit, etc.

If you find yourself in this precarious situation, you"d better first rescue files from your Mac to avoid permanent loss. Then, follow the detailed solutions to fix the MacBook Pro/Air that won"t turn on due to the black screen issue.

To prevent the loss of your personal files and other important data watch this video carefully. You"ll get the detailed way to recover files from MacBook that won"t turn on.

To recover data from your Mac/MacBook that has a black screen issue, you need to run iBoysoft Data Recovery in macOS Recovery mode. For the best outcome, it"s recommended to watch the above video.

Sometimes, the MacBook shows a black screen only not playing the startup chime, or the MacBook Pro screen goes black after a few minutes of booting. In this case, check if the battery of your Mac is charged with enough power to run the startup procedures.

In order to solve that issue, you can plug in the charger and wait for some minutes and then press the power button. In some cold environments, it also helps warm up the back part of your MacBook first.

If you can hear some spinning noise from the hard drive or fans at startup, or the keyboards light, it means that the black screen issue is not caused by the lack of power.

On a modern MacBook without a removable battery like MacBook Pro 13" with Touch Bar and MacBook Pro 15" with Touch Bar, you can long hold the power button to shut it down, wait for 10 seconds around, and then reboot the MacBook.

For some older MacBooks like MacBook Air 13" and MacBook 13" whose battery is removable, you can forcibly shut it down, unplug it, remove the battery, and wait for 10 seconds. Then you need to put the battery back and restart the Mac.

So, to solve this issue you should unplug all the external devices, including USB drivers, phones, printers and etc. Then restart your Mac by pressing the power button/Touch ID button on your Macbook again.

A situation that very often results in the black screen problem on your MacBook isn"t a startup problem, but due to the monitor having been dimmed down.

Usually, when accidentally hitting the F1 key it makes the screen brightness very low; you can revert this situation by pressing the F2 key to light back your screen.

If you see a black screen on your Mac with the cursor, it means that the machine gets stuck on the black screen for a moment and then gets into sleep mode.

To stop your Mac from sleeping, you can type the first letter of the user name and hit "Enter". Mac will recognize that you type in the wrong information and give you a response, and consequently, it will withdraw from the black screen situation.

Mac"s NVRAM stores in-memory settings including display resolution, startup disk selection, recent kernel panic information, etc. So, resetting NVRAM may be helpful for fixing the MacBook Pro"s black screen of death.

Booting into Mac Recovery Mode can be a solution when your MacBook Pro/Air screen goes black and unresponsive at startup. It happens due to your system drive may be corrupted. Those corruptions can be in the partition table, the file system, or the file system, etc.

You might find that your M1 MacBook Pro/Air is stuck on a black screen after restart. As reported, this issue commonly appears on the M1 Mac in using an external monitor, especially when the M1 Mac is on wake from sleep mode.

Guide to fix an M1 MacBook Air/Pro that"s not turning on due to software and hardware issues. To fix an unbootable M1 MacBook Air or MacBook Pro without data loss, follow this post. Read more >>

Even though the iMac is packed with the latest processors, faster memory, Retina display, and phenomenal graphics, it also can"t avoid the black screen issue still.

When your MacBook Air or MacBook Pro won"t turn on but boots into the black screen, it"s not the end of the world. You can find solutions in this post or get assistance from an Apple store specialist.

If you have a MacBook with a Retina display screen (pretty standard equipment these days, but not with the older MacBooks) you can expect to spend between $455 and $755 replacing the screen completely at the Apple Store.

If you"ve ever had a flickering MacBook Pro® screen, you know how easily it can ruin your work day or movie night. Fortunately, there are some simple fixes that can help resolve the problem.

At Asurion, when tech breaks, we fix it—whether your MacBook® won"t turn on or it needs a factory reset. We"ll walk you through what to do if your MacBook Pro screen is flickering so you can get back to what"s important.

There are various ways to try to stop your screen from flickering. Our suggestions go from simple to increasingly more complex, so start at the beginning and work your way down the list.

Updating your MacBook Pro to the latest iOS®version can solve all kinds of issues, including a flickering screen. Here"s how to confirm that your laptop is running the latest version of macOS®.Open System Preferences.

We"re all used to staring at a bright white screen, but Dark Mode offers a darker color scheme that"s easier on our eyes. Meanwhile, True Tone technology adjusts the color and intensity of your retina display to match the light around you, so that what you see on your screen appears more natural. Both features can occasionally lead to screen flickering.

Another cause of screen flickering lines on your MacBook Pro? Recently downloaded applications and files, which may have viruses. To erase them from your computer:Go to the dock and click on the Finder.

Many MacBooks come with two graphics systems. They also come with the automatic graphics switching option turned on to enable your computer to use the best one for whatever you"re doing—and to maximize battery life. But sometimes the two graphics systems can cause screen flickering. To turn off the setting:Go to Apple menu>System Preferences>Battery.

If that acronym looks more like a foreign language than a tech term, you"re not alone. NVRAM stands for non-volatile random-access memory, which stores different kinds of data, including your screen resolution, volume preferences, and time zone information. Screen flickering can start when the NVRAM is cluttered or outdated. Here"s how to reset your NVRAM:Shut down your Mac.

Your MacBook Pro"s System Management Controller (SMC) determines how your computer manages power. Much like restarting and updating, resetting the SMC can resolve various glitches, including a flickering screen. There are different ways to reset the SMC, depending on which model you have.

Doing so will help you figure out whether the software that loads as your Mac starts up is causing your screen to flicker. Keep in mind, your screen resolution may be low and your computer may run slowly—that"s normal in Safe Mode. When you"re ready, check our guide to how to start your computer in Safe Mode. If the flickering stops in Safe Mode, turn off your Mac and then turn it back on as usual—you"re good to go.

If you"ve tried the troubleshooting tips above but the screen flickering continues on your MacBook Pro, it"s time to run Apple Diagnostics. It will help figure out if there"s a hardware issue.Shut down your computer.

Whether you are using an iMac, MacBook Pro, MacBook Air, or any other Mac machine, there are 4 common reasons responsible for the Mac black screen issue.

If your answer to any of the above questions is yes, you need to get the concerned component repaired or replaced to resolve Mac"s black screen issue. If not, move to the next method.

Therefore, you need to force shutdown your Mac. You can force shutdown or restart your Mac using the method suited for your Mac type, whether it"s an iMac, MacBook with M1-chip, or a Mac with an Intel chip.

For MacBook with a removable battery, shut down your MacBook and remove the battery. Wait for 10 seconds, then attach the battery and switch on your Mac.

For MacBook with a non-removable battery, press and hold the power button for 10 seconds. Once your system has shut down, wait for another 10 seconds and switch on your MacBook.

The errors in formatting or directory structure can result in minor issues like hanging of files and programs and may aggravate abnormal shutdown and black screen of death.

If the problem of black screen is due to some erroneous app or program, this method will help identify it and let you get rid of the concerned app/program.

There are high chances of data loss when you face the black screen issue on your Mac. Even when you apply the above-listed methods to resolve the black screen problem, some of them may cause loss of unsaved or corrupt data.

The problem of Mac"s black screen of death is not irreparable and neither do you need to rush to the Apple repair store to get it fixed. The above methods are presented in the most lucid way to resolve the issue yourself. We hope you have overcome the problem and are enjoying your Mac’s seamless performance. Which method helped you get rid of the trouble? Do share with us in the comments below.

If you’re ready to sell, trade in, or give away your Mac or wipe it for another reason there are different steps to the process depending on what Mac you have and what version of macOS you’re on. Notably, macOS Ventura and Monterey include a handy modern erase option like iOS. Read on for how to reset MacBooks and Mac desktops.

When the installation is complete you’ll see the welcome screen with the region selector. If keeping your Mac, continue on with the setup process. If selling or giving your Mac to someone else, use the keyboard shortcut ⌘Q to quit the setup assistant and power your Mac down.

MacBook Pro RepairIf you need your Macbook Pro for work or school or home but are stuck dealing with a broken cracked screen or a battery that won’t charge, bring it to your local uBreakiFix for a quick and affordable Macbook Pro repair. Productivity shouldn’t suffer because of a broken device, and we can get your MacBook Pro back up and running in just a few hours.

Macbook Pro Repair Process Starting our Macbook Pro repair process with a free device diagnostic makes getting a repair quick and convenient. A skilled technician in your local store will examine your Macbook Pro, determine what the root of the issue is, and suggest the best repair service. If you choose to proceed with the repair, they can get started right away as your device will never leave our store. Device diagnostic exams are always free and customers are under no obligation to continue with the repair. Our Macbook Pro repairs typically take a day to complete, so you don’t have to be away from your device for long.

Macbook Pro Screen Replacement The most common issue we see with the MacBook Pro is screen glass damage. Frequent drops and other accidents are usually the cause but it’s a piece of cake for us. We can easily repair this issue. We can also help you with hard drive repairs, memory upgrades, disc drive repairs and battery replacements. If your computer is lagging or slow because of a virus or spyware, we can help you remove it. Did your device have an unfortunate incident with water or coffee? You should skip the rice and bring it right to a repair professional. The longer you wait, the more likely that corrosion and water damage will set into your logic board. We can do a free water damage repair diagnostic on your device to determine if we can fix it.

Promises and Warranties We want our customers to be confident that they are getting the best deal on their repairs. If you can find a lower advertised price for the same repair, our low price guarantee states that we will match and beat that price. All of our repairs also come with a 1 year warranty that is valid at any uBreakiFix location, protecting your device no matter where you roam. Description: Looking to repair your MacBook Pro? We Can Fix It, From MacBook Pro Screen Replacement, Battery Replacements, Keyboard & Case, Adware Removal and More