adafruit 1.14 240x135 color tft display quotation

DescriptionAdafruit 1.14" Color TFT Display w/ MicroSD Card Breakout features a 1.14" diagonal length display that is packed with RGB pixels for building very small high-density displays. This breakout board offers a 4-wire SPI interface for communication and its own pixel-addressable frame buffer. This allows the board to be used with a wide range of microcontrollers or microcomputers. The breakout board features the ST7789 TFT driver, ultra-low-dropout 3.3V regulator, and a 3V/5V level shifter. The level shifter makes sure that the breakout board can be used with 3.3V or 5V power and logic. This breakout board consists of a microSD card holder that helps in loading full-color bitmaps from a FAT16/FAT32 formatted microSD card. The breakout board is RoHS2 compliant and is available in 32mm x 27.8mm x 5.7mm dimensions.

adafruit 1.14 240x135 color tft display quotation

I am developing a project which is like a portable video player. I have connected this 1.14" display https://learn.adafruit.com/adafruit-1-14-240x135-color-tft-breakout/python-usage and connected it through the GPIO pins in raspberry pi zero. can you please suggest the drivers required to use in order to play videos in my display through python? right now, in python, I have been using pillow library and stt7789 library to show images in the same folder.

adafruit 1.14 240x135 color tft display quotation

/* ADAFRUIT TFT: 2.2" 18-bit color TFT LCD display with microSD card breakout - ILI9340. Arduino Leonardo The ILI9341 chip is backward compatible with the ILI9340 chip, which is no longer used.*/

If you have a problem with any of the Adafruit_ILI9341 library examples, quote the example name. Explain your problem. Copy-paste your constructor statement.

Thanks for the response. Yes, I will but two points. The first is I have to get it to work before I do that; my pinouts might well be all wrong, although you don"t seem to think so? (I appreciate that I would just be soldering the header to the TFT though) The second is I er don"t actually have a soldering Ron. Any ideas for the best one to get would be welcome.

adafruit 1.14 240x135 color tft display quotation

The module with a color IPS LCD display with a diagonal of 1.47". It has a resolution of 320x172 pixels and uses the ST7789 controller, and communication with the module is realized via the SPI interface. The display is characterized by rounded corners and a wide viewing angle. The user also has a microSD card slot at his disposal. placed on the back of the display.Due to its small size, the module will work well in projects of small devices for displaying text or user interface Documentation with a library and examples in Python is available in the GitHub repository.