multifunction tft display quotation

The OMC-140 is the new self designed and developed multifunctional TFT Display of Observator. Wherever you need to visualize your critical measurement information on a dedicated instrument the OMC-140 can be applied. Whether it is presenting wind information or indication of other meteorological parameters, the OMC-140 is the ideal instrument.

AcquaLink® multifunction TFT Displays are available in 4.3" and 7" sizes. The full 24 bit/16 m colors optically bonded displays feature transmissive layer technology for unprecedented and unsurpassed readability even in direct sunlight. The TFT Display shows a wide array of data received from the AcquaLink® NavBox or NMEA 2000®. Users can customize up to 40 different data pages with single, double, treble or quad grid layouts.

TFT Displays can be daisy-chained with other AcquaLink® gauges, displays or NavControls using the unique VDO Marine Bus or directly connected to the NMEA 2000® backbone (optional adapter cable required) for simple installation on any yacht.

7" TFTs are equipped with capacitive multi touch screens to slide between pages whereas 4.3" displays require the use of a NavControl unit for data input and operation.

Includes:TFT Display, Bezel, Silicone Cover, Mounting Screws, Drilling Template, Installation Instructions, Safety InstructionsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The new OceanLink 4.3" multifunction TFT display features a full 24 bit / 16 mio. colors optically bonded display with transmissive layer technology for perfect readability even in direct sunlight. The TFT displays and distributes a wide array of data received from NMEA 2000® or J1939 CAN Bus systems or analogue sensors directly connected to the display. Users can customize up to 40 different data pages with single, double, treble or quad grid layouts.

The OceanLink 4.3" TFT sends the received data to up to 16 satellite 52 mm OceanLink gauges. It also converts and sends J1939 and analogue data to the NMEA 2000® network and can be used as CAN Bus gateway.

The ICOM MXD5000 01 12.1" Multifunctional Display is designed for use with the ICOM Marine Commander System and boasts super bright, vivid detail from any viewing angle, even in direct sunlight.

The Multifunction displays NavNet TZtouch and TZtouch2 are built on an Ethernet network, allowing you to add as many components as you desire, along with up to six displays, as well as ...

The new FI-70 INSTRUMENT/DATA ORGANIZER sports a vibrant 4.1" bonded color display that is visible even in the harshest sunlight conditions. Utilizing the CAN bus network, external sensors ...

... day or night, the IS35 offers a smart interface to engine data, fuel efficiency, depth history and more. This digital gauge automatically displays the most relevant information available from your boat’s ...

They allow to configure display settings, to set the alarms and to calibrate the sensors. The PAD pilot allows to engage/disengage the autopilot and to modify the steering instructions. ...

The GMI 20 digital marine instrument display is perfectly designed for both power and sail vessels. Designed to clearly show depth, speed, wind and 100+ marine and vessel parameters, its ...

... user-interface. It allows you to customize almost every display property, allowing you to choose the information you want to be displayed, in the way you want to see it!

... inch rectangular color display with an integrated 5 button keypad. The R3s has the same bezel dimensions as standard 3-3/8″ analog gauges, allowing it to blend into a variety of dash designs seamlessly.

The multifunction VisionMaster FT TotalWatch offers complete control and flexibility for bridge manning. It easily displays Radar, Chart Radar and ECDIS in any combination and configuration to suit different ...

... . With the IND commercial marine display you’re in complete control with easy to use controls, source selection, and dimming capabilities. Heavy duty mount bracket and AC DC control come standard on 19″ or 24″ displays.

The NEW PHT-SRT-CTL is a compact digital control that allows for easy touch command control from any bridge. Turn displays on and off, brighten or dim to your preference, and select any input for up to ...

The OceanLink® 7" multifunction TFT Display features a full 24 bit / 16 m colors optically bonded display with transmissive layer technology for perfect readability even ...

Designed with stylish mineral glass front lens framed by a brushed stainless-steel ring, it can display a wealth of critical boat system data in a compact package that"s perfect for cockpits on smaller vessels with limited ...

The OceanLink® 4.3" multifunction TFT Display features a full 24 bit / 16 m colors optically bonded display with transmissive layer technology for perfect readability ...

... MasterCAN Display 35 receives and displays current values of: standard CAN bus; additional sensors by CANj1939/S6 interface and two voltage or frequency inputs. Сhoice from 3500+ parameters.

... high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM410 is a user friendly dedicated marine display ...

... sunlight viewable color display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad.

... sentences. The MaxRp110 will simultaneously monitor four input channels for two different sentences per channel and simultaneously display NMEA data on three digital displays ...

The BOSS™ eco system consists of a touchscreen display with integrated software, which continuously calculates and shows the steering behaviour in relation to the steering movements and rudder angles, aligned to the actual ...

The 4.5-inch intelligent Multi Info Display (MID) features an aesthetic and harmonized design which is a new addition to JRC"s comprehensive product line.

The Multifunction displays NavNet TZtouch and TZtouch2 are built on an Ethernet network, allowing you to add as many components as you desire, along with up to six displays, as well as ...

The new FI-70 INSTRUMENT/DATA ORGANIZER sports a vibrant 4.1" bonded color display that is visible even in the harshest sunlight conditions. Utilizing the CAN bus network, external sensors ...

... day or night, the IS35 offers a smart interface to engine data, fuel efficiency, depth history and more. This digital gauge automatically displays the most relevant information available from your boat’s ...

They allow to configure display settings, to set the alarms and to calibrate the sensors. The PAD pilot allows to engage/disengage the autopilot and to modify the steering instructions. ...

The GMI 20 digital marine instrument display is perfectly designed for both power and sail vessels. Designed to clearly show depth, speed, wind and 100+ marine and vessel parameters, its ...

... user-interface. It allows you to customize almost every display property, allowing you to choose the information you want to be displayed, in the way you want to see it!

... inch rectangular color display with an integrated 5 button keypad. The R3s has the same bezel dimensions as standard 3-3/8″ analog gauges, allowing it to blend into a variety of dash designs seamlessly.

The multifunction VisionMaster FT TotalWatch offers complete control and flexibility for bridge manning. It easily displays Radar, Chart Radar and ECDIS in any combination and configuration to suit different ...

... . With the IND commercial marine display you’re in complete control with easy to use controls, source selection, and dimming capabilities. Heavy duty mount bracket and AC DC control come standard on 19″ or 24″ displays.

The NEW PHT-SRT-CTL is a compact digital control that allows for easy touch command control from any bridge. Turn displays on and off, brighten or dim to your preference, and select any input for up to ...

The OceanLink® 7" multifunction TFT Display features a full 24 bit / 16 m colors optically bonded display with transmissive layer technology for perfect readability even ...

Designed with stylish mineral glass front lens framed by a brushed stainless-steel ring, it can display a wealth of critical boat system data in a compact package that"s perfect for cockpits on smaller vessels with limited ...

The OceanLink® 4.3" multifunction TFT Display features a full 24 bit / 16 m colors optically bonded display with transmissive layer technology for perfect readability ...

... MasterCAN Display 35 receives and displays current values of: standard CAN bus; additional sensors by CANj1939/S6 interface and two voltage or frequency inputs. Сhoice from 3500+ parameters.

... high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM410 is a user friendly dedicated marine display ...

... sunlight viewable color display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad.

... sentences. The MaxRp110 will simultaneously monitor four input channels for two different sentences per channel and simultaneously display NMEA data on three digital displays ...

The BOSS™ eco system consists of a touchscreen display with integrated software, which continuously calculates and shows the steering behaviour in relation to the steering movements and rudder angles, aligned to the actual ...

The 4.5-inch intelligent Multi Info Display (MID) features an aesthetic and harmonized design which is a new addition to JRC"s comprehensive product line.

A thin-film-transistor liquid-crystal display (TFT LCD) is a variant of a liquid-crystal display that uses thin-film-transistor technologyactive matrix LCD, in contrast to passive matrix LCDs or simple, direct-driven (i.e. with segments directly connected to electronics outside the LCD) LCDs with a few segments.

In February 1957, John Wallmark of RCA filed a patent for a thin film MOSFET. Paul K. Weimer, also of RCA implemented Wallmark"s ideas and developed the thin-film transistor (TFT) in 1962, a type of MOSFET distinct from the standard bulk MOSFET. It was made with thin films of cadmium selenide and cadmium sulfide. The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968. In 1971, Lechner, F. J. Marlowe, E. O. Nester and J. Tults demonstrated a 2-by-18 matrix display driven by a hybrid circuit using the dynamic scattering mode of LCDs.T. Peter Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories developed a CdSe (cadmium selenide) TFT, which they used to demonstrate the first CdSe thin-film-transistor liquid-crystal display (TFT LCD).active-matrix liquid-crystal display (AM LCD) using CdSe TFTs in 1974, and then Brody coined the term "active matrix" in 1975.high-resolution and high-quality electronic visual display devices use TFT-based active matrix displays.

The liquid crystal displays used in calculators and other devices with similarly simple displays have direct-driven image elements, and therefore a voltage can be easily applied across just one segment of these types of displays without interfering with the other segments. This would be impractical for a large display, because it would have a large number of (color) picture elements (pixels), and thus it would require millions of connections, both top and bottom for each one of the three colors (red, green and blue) of every pixel. To avoid this issue, the pixels are addressed in rows and columns, reducing the connection count from millions down to thousands. The column and row wires attach to transistor switches, one for each pixel. The one-way current passing characteristic of the transistor prevents the charge that is being applied to each pixel from being drained between refreshes to a display"s image. Each pixel is a small capacitor with a layer of insulating liquid crystal sandwiched between transparent conductive ITO layers.

The circuit layout process of a TFT-LCD is very similar to that of semiconductor products. However, rather than fabricating the transistors from silicon, that is formed into a crystalline silicon wafer, they are made from a thin film of amorphous silicon that is deposited on a glass panel. The silicon layer for TFT-LCDs is typically deposited using the PECVD process.

Polycrystalline silicon is sometimes used in displays requiring higher TFT performance. Examples include small high-resolution displays such as those found in projectors or viewfinders. Amorphous silicon-based TFTs are by far the most common, due to their lower production cost, whereas polycrystalline silicon TFTs are more costly and much more difficult to produce.

The twisted nematic display is one of the oldest and frequently cheapest kind of LCD display technologies available. TN displays benefit from fast pixel response times and less smearing than other LCD display technology, but suffer from poor color reproduction and limited viewing angles, especially in the vertical direction. Colors will shift, potentially to the point of completely inverting, when viewed at an angle that is not perpendicular to the display. Modern, high end consumer products have developed methods to overcome the technology"s shortcomings, such as RTC (Response Time Compensation / Overdrive) technologies. Modern TN displays can look significantly better than older TN displays from decades earlier, but overall TN has inferior viewing angles and poor color in comparison to other technology.

Most TN panels can represent colors using only six bits per RGB channel, or 18 bit in total, and are unable to display the 16.7 million color shades (24-bit truecolor) that are available using 24-bit color. Instead, these panels display interpolated 24-bit color using a dithering method that combines adjacent pixels to simulate the desired shade. They can also use a form of temporal dithering called Frame Rate Control (FRC), which cycles between different shades with each new frame to simulate an intermediate shade. Such 18 bit panels with dithering are sometimes advertised as having "16.2 million colors". These color simulation methods are noticeable to many people and highly bothersome to some.gamut (often referred to as a percentage of the NTSC 1953 color gamut) are also due to backlighting technology. It is not uncommon for older displays to range from 10% to 26% of the NTSC color gamut, whereas other kind of displays, utilizing more complicated CCFL or LED phosphor formulations or RGB LED backlights, may extend past 100% of the NTSC color gamut, a difference quite perceivable by the human eye.

In 2004, Hydis Technologies Co., Ltd licensed its AFFS patent to Japan"s Hitachi Displays. Hitachi is using AFFS to manufacture high end panels in their product line. In 2006, Hydis also licensed its AFFS to Sanyo Epson Imaging Devices Corporation.

A technology developed by Samsung is Super PLS, which bears similarities to IPS panels, has wider viewing angles, better image quality, increased brightness, and lower production costs. PLS technology debuted in the PC display market with the release of the Samsung S27A850 and S24A850 monitors in September 2011.

TFT dual-transistor pixel or cell technology is a reflective-display technology for use in very-low-power-consumption applications such as electronic shelf labels (ESL), digital watches, or metering. DTP involves adding a secondary transistor gate in the single TFT cell to maintain the display of a pixel during a period of 1s without loss of image or without degrading the TFT transistors over time. By slowing the refresh rate of the standard frequency from 60 Hz to 1 Hz, DTP claims to increase the power efficiency by multiple orders of magnitude.

Due to the very high cost of building TFT factories, there are few major OEM panel vendors for large display panels. The glass panel suppliers are as follows:

External consumer display devices like a TFT LCD feature one or more analog VGA, DVI, HDMI, or DisplayPort interface, with many featuring a selection of these interfaces. Inside external display devices there is a controller board that will convert the video signal using color mapping and image scaling usually employing the discrete cosine transform (DCT) in order to convert any video source like CVBS, VGA, DVI, HDMI, etc. into digital RGB at the native resolution of the display panel. In a laptop the graphics chip will directly produce a signal suitable for connection to the built-in TFT display. A control mechanism for the backlight is usually included on the same controller board.

The low level interface of STN, DSTN, or TFT display panels use either single ended TTL 5 V signal for older displays or TTL 3.3 V for slightly newer displays that transmits the pixel clock, horizontal sync, vertical sync, digital red, digital green, digital blue in parallel. Some models (for example the AT070TN92) also feature input/display enable, horizontal scan direction and vertical scan direction signals.

New and large (>15") TFT displays often use LVDS signaling that transmits the same contents as the parallel interface (Hsync, Vsync, RGB) but will put control and RGB bits into a number of serial transmission lines synchronized to a clock whose rate is equal to the pixel rate. LVDS transmits seven bits per clock per data line, with six bits being data and one bit used to signal if the other six bits need to be inverted in order to maintain DC balance. Low-cost TFT displays often have three data lines and therefore only directly support 18 bits per pixel. Upscale displays have four or five data lines to support 24 bits per pixel (truecolor) or 30 bits per pixel respectively. Panel manufacturers are slowly replacing LVDS with Internal DisplayPort and Embedded DisplayPort, which allow sixfold reduction of the number of differential pairs.

The bare display panel will only accept a digital video signal at the resolution determined by the panel pixel matrix designed at manufacture. Some screen panels will ignore the LSB bits of the color information to present a consistent interface (8 bit -> 6 bit/color x3).

With analogue signals like VGA, the display controller also needs to perform a high speed analog to digital conversion. With digital input signals like DVI or HDMI some simple reordering of the bits is needed before feeding it to the rescaler if the input resolution doesn"t match the display panel resolution.

Kawamoto, H. (2012). "The Inventors of TFT Active-Matrix LCD Receive the 2011 IEEE Nishizawa Medal". Journal of Display Technology. 8 (1): 3–4. Bibcode:2012JDisT...8....3K. doi:10.1109/JDT.2011.2177740. ISSN 1551-319X.

Brody, T. Peter; Asars, J. A.; Dixon, G. D. (November 1973). "A 6 × 6 inch 20 lines-per-inch liquid-crystal display panel". 20 (11): 995–1001. Bibcode:1973ITED...20..995B. doi:10.1109/T-ED.1973.17780. ISSN 0018-9383.

K. H. Lee; H. Y. Kim; K. H. Park; S. J. Jang; I. C. Park & J. Y. Lee (June 2006). "A Novel Outdoor Readability of Portable TFT-LCD with AFFS Technology". SID Symposium Digest of Technical Papers. AIP. 37 (1): 1079–82. doi:10.1889/1.2433159. S2CID 129569963.

Kim, Sae-Bom; Kim, Woong-Ki; Chounlamany, Vanseng; Seo, Jaehwan; Yoo, Jisu; Jo, Hun-Je; Jung, Jinho (15 August 2012). "Identification of multi-level toxicity of liquid crystal display wastewater toward Daphnia magna and Moina macrocopa". Journal of Hazardous Materials. Seoul, Korea; Laos, Lao. 227–228: 327–333. doi:10.1016/j.jhazmat.2012.05.059. PMID 22677053.

HED has expanded its family of vehicle displays with a new 10.1-inch color display and operator interface that can show video and graphical gauges simultaneously – saving space on today’s already crowded off-highway dashboards.

The CL-712 display features a dual processor design; an ARM processor to handle the LCD display and a separate microcontroller to handle the real-time I/O control and CAN interface responsibilities. The CL712 also boasts four channel video capabilities for multi camera applications. Programming the CL712 is simple with HED’s Arranger drag-and-drop GUI programming tool.

The CL-712 has an IP67 and IP69K-rated sealed enclosure that’s built to last in the harsh environments faced by many off-highway vehicles. Sharp, colorful graphics enhance the operator experience on the TFT color LCD display, which is optically bonded and provides a 1000 nit brightness level for optimal sunlight readability.

The CL-712 displays are available for immediate purchase or sample evaluation. For more information, contact John Kitzerow, Product Manager, at jkitzerow@hedonline.com or at 1-800-398-2224.

The DISPLAY VISIONS EA uniTFT is a multifunctional 5" TFT HMI. It has a built-in RTC including a battery backup. The representation on the display is effected based on the commands given by the user. Every item on the display is an independent object and can be manipulated.

Driver"s display console for Locomotives / EMUs / Metro Cars for showing running data (status information), historical data (Event / Fault logs), maintenance related data and for data entry.

The Multifunction TFT LCD Display is used in Locomotives as Man Machine Interface for guiding the operator to control the Locomotive. It communicates with the Locomotive Control System by either RS232 or RS485 link. It displays the data sent by the Locomotive Control System in graphical as well as text format.

The data received from the Locomotive Control System can be displayed in graphical form as circular or linear dials, or as a simple text. Status information can be shown in the form of status icons or coloured boxes or buttons. The overall layout of the display screen can be programmed as per customer requirement.

Fault messages, maintenance remedy messages and any other relevant information is displayed in specified display areas in simple text format. Data input for operator or maintenance configuration related parameters can be done through keypad provided or through touch screen when available.

The display can communicate with 2 different systems on serial link and process the combined data for displaying simultaneously. The display screens are programmable and the layout, language etc of display screen can be customized to suit various locomotive model and geographical locations.