rpi 3.2 inch tft lcd screen in stock

I needed a reasonable size LCD display for my Rpi 3B+ so that I could display the range data coming from my Slamtec RPLidar A1M8 in real time. I was going to use the recommended Adafruit LCD Display for the project, but decided on the Waveshare LCD Display because it had higher resolution, I could get it sooner, and I saved $14.

The LCD Display Module attached easily to my Rpi 3B+ GPIO bus and then I proceeded to follow the Waveshare Wiki guide for installing the software. After downloading the software onto my Rpi 3B+, using SSH, I don"t recommend installing it from the SSH CLI as the installation process will disconnect the SSH window from the Rpi. Therefore it is best to attach a monitor, keyboard, and mouse to your Rpi to complete the installation per the Waveshare Wiki guide using the Buster Desktop terminal.

After a reboot, the Waveshare LCD Display Module software functioned as expected. The Display was crisp and clean without any dot bleed over and the touch screen functioned as advertised.

If you are an experienced user of the Rpi, I would highly recommend this LCD Display Module if you need a LCD Display Module to go with an Rpi project. That being said, Rpi beginners may have some difficulty with the software installation.

3.2 inch resistive touch screen TFT LCD designed to work directly with Raspberry Pi, Raspbian Image is provided in a DVD with this product. A Touch pen is also included for effective touch interface.

Designed for use with the Raspberry Pi Model B/B+, the Seeed 3.2 inch TFT LCD Touch Screen is an easy way to process photos and videos. Easily navigate the touchscreen interface to take photos with up to 17 camera modes, and play videos with a variety of format—MP4 included Read More

It is a 3.2" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all, it is use FPC cable connect with Raspberry Pi.

3.2" LCD TFT display with touch screen. The display is equipped with an SPI interface for displaying the image and operating the touch screen. Resolution 320x240 pixels. It works with minicomputer Raspberry Pi via a 26-pin connector. The display supports operating systems: Raspbian, Ubuntu , Kali and Retropie.

This is all-new Version V4.0 3.2 Inch TFT LCD Touch Screen for Raspberry Pi display from waveshare is big (3.2″ diagonal) bright and colourful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.

As a bonus, this 3.2 Inch TFT LCD Screen for Raspberry Pi V4.0 display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. This display has a controller built into it with RAM buffering so that almost no work is done by the microcontroller.

This 3.2 Inch TFT LCD Screen display is an alternative solution for Raspberry Pi compatible HDMI display; the 3.2 inches (8.13 cm) Resistive TFT Touch Screen Display, which uses SPI Protocol (serial peripheral interface) to communicate with the main processor. It can be mounted directly to the GPIO pins and it doesn’t require any external power source.