transparent lcd panel pc for sale

I saw a really cool video of a PC case called "Snowblind", that had a transparent LCD Screen as a side panel. I was amazed over how cool it was. The only problem was that it was really expensive. Therefore, I tried making my own! In this instructables I will go through how I made it, and how you could make your own. The best of all, since it was made from an old monitor that was thrown away, it was basically free! I just added some LED strips on the inside of the case to get better contrast on the screen. You could probably re-use the monitors backlight, but it"s safer and easier to just get some cheap LED strips.

First, remove the frame of the panel. It is fixed with clips, so just bend the frame a little and lift the frame up. Next, separate the front LCD from the backlight. For the next step, you will have to be careful. This step involves removing the anti glare film. It is glued to the panel, and therefore it"s easy to break the LCD when trying to remove it.

Then you are done modding the LCD! Now, you can hook it up to the panel and test it. Just be careful with the ribbon cables going from the LCD PCB to the panel.

The side panel of this case fits the LCD perfectly. Just line it up to the side facing the back, and to the top, and use some tape to tape it to the glass. Then, use some vinyl on the outside where the LCD is not covering the glass.

It"s really important to have lots of lights inside the case, to make it easier to see the LCD. Therefore, try to fill the case with even more LED strips.

Now you can carefully mount the side panel back on the computer. You might have to drill a new hole for the thumb screw in the back to make it fit properly.

Hey I have a little question, I also have a Dell 1905FP, but I think it"s an older model because I don"t have a ribbon cable but a normal cable with a plug. My problem is that I have peeled off one film but it still looks like there is a second film on the back because it is still a little blurry. But I"m afraid that if I try to pull them off, my LCD display will break. Maybe you have an idea. Thanks in advance

Stunning result ! Bought for 10€ a Dell 1907FPc which is fairly similar to yours. I have trouble identifying the pin layout to find the 5V pin. Did you plug in the power supply to your AC while checking with your multimetter ?0

Great tutorial and video! I"m trying my hand at replicating your process and I even got my hands on the exact monitor. I have reached the point where I"ve disassembled the panel and controllers, and discharged the capacitors from the PSU, but I am a little stuck at this point because I don"t know how to wire up the molex header. I watched your video and saw that you had two wires soldered to the power connector. Which connectors are they and where do they go on the molex cable? Thank you!

Terrific job! May I ask why you would need to remove the front polarizer? If my understanding is correct, both the front and back polarizers are needed in order for the LCD to work properly (i.e., the light gets polarized by the back polarizer first, and then passes through the front polarizer)? You comments will be appreciated!

I tried taking some photos, but I have covered the screen PCB with a cover, so it was hard to see in the photos. I basically just laid it inside the case with a 90-degree angle. I tried drawing it here: (view from the front)0

I think you should have more pics and info about the re- mounting the LCD. After all if you don"t do it right all that work is for nothing. While I understand your wiring diagram, I think that it should be explained and a larger part of this Instructible...for example to get white lite your are powering all 3 lanes (red,green,blue) on the RGB tape.

Hello, Wonderfull project, I have the same case and I would love to do it (if I have time and the screen to the right size). Just a question, can you put a photo of the cable connection to see if it"s easy to open the case ? One little suggestion, instead of connecting the panel to the graphic card (which mean to run a cable outside, why don"t you use a USB to VGA or DVI converter (like this https://www.amazon.fr/Adaptateur-convertisseur-adaptateur-Affichage-multi-écrans/dp/B079L81FRD/ref=asc_df_B079L81FRD/?tag=googshopfr-21&linkCode=df0&hvadid=227894524041&hvpos=&hvnetw=g&hvrand=17927658121409960098&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9055710&hvtargid=pla-442905712462&psc=1) ?

Thanks! So I actually bought one of those adapters, as well as an internal USB 3.0 to USB A port and tried it that way, but I couldn"t get it to work reliably. You might have better luck than I have, but I found it simpler to just run the cable through the case. I just removed one of the PCIE slot covers, and ran it out through there, so opening and closing the case is not a problem.More CommentsPost Comment

Transparent LCD’s provide an innovative display solution opening up new ways for brands to promote their products and services. Examples include retail stores looking to advertise a new fashion clothing or accessory, museums securely housing a precious artifact with information displayed on screen or brands looking to launch a new product at a live event or show. The opportunities are endless!

Our Transparent LCD Displays include a Grade A LCD panel with metal bezel protecting the edges / electronics and a media board supporting HDMI or VGA inputs from your PC, Laptop or Media Player.

Transparent screen technology offers intriguing ways to deliver visual information to your audience, being used to reveal or conceal products, objects or artefacts behind the screen.

The combination of HD LCD technology (4K on our 65″, 86″, 98″ version) with a transparent screen substrate opens up creative avenues that were previously closed with traditional LCD displays. Solid black pixels on a transparent background can be used in intriguing ways to hide (and gradually reveal) whatever is behind the screen.

Our Transparent LCD monitors are designed for integration into the customers own furniture housing or display case while our Transparent LCD showcases offer a complete solution including the display, housing and backlight with white or black options available on request. We can also offer custom freestanding options for POP / POS displays. Transparent LCD’s are predominantly fully housed however we’ve recently developed an innovative housing method using a high brightness LED panel which allows the display case sides to remain transparent for improved visibly into the display case.

Using their original design as a starting point, we worked closely with the team at Nike to adapt to the mechanical aspects of the design, the result was a sleek and minimalist set of nine Transparent LCD Display Screens, custom built to suit the applications requirements, bringing Nike’s original concept ideas to life.

These screens can also be granted multi-touch capability by combining them with infrared touch frames or PCAP touch overlays, to add an interactive element to your installation. This creates a very powerful impact when the content on screen integrates with real life objects behind the screen, encouraging viewers to interact on a level that will exceed expectations.

Transparent LCD’s comprise of an LCD panel without the backlight with white pixels appearing as transparent. In order to display an image, the Transparent LCD needs to be integrated into a housing with a high bright LED backlight.

We can also offer more complete solutions like our Transparent LCD Showcase that comes fully contained and ready to use with a powerful backlighting system to guarantee the best picture quality.

Yes in order to display an image Transparent LCD’s need to have a strong backlight. Notoriously Transparent LCD’s have also needed some form of housing to achieve optimum image quality, however, Nike’s House of Innovation paired our Transparent LCD’s with powerful, oversized backlights that allowed the screens to be mounted with no surround but still producing a high-quality image.

Transparent LCD’s are arguably the most popular transparent screens but are hindered by their need for a backlight to operate. For applications looking for a similar effect without the backlighting, Transparent OLEDs require no housing or surround but are only currently available in a 55″ screen size with HD quality. For larger transparent screen applications, Transparent LED’s are recommended with external and internal solutions usually installed to glass facades for the impact of an led screen without compromising the view from inside the building.

We also offer transparent projection technologies including our Clearview Rear Projection Film featured in Guardians of the Galaxy as well as at the 83rd Oscars celebration and MTV EMA awards.

Transparent LCD’s are a great way to combine physical and digital displays in one central place making them a popular choice for museums and exhibitions. Our transparent screens can also be integrated into display furniture and appliances & vending machines like freezer doors for supermarkets. Other uses include POS displays, store window displays, trade shows and product launches.

We manufacture in Britain and ship worldwide – if you need further information, a pricing quote, or want to discuss ideas for using our Transparent LCD Display click the link below to contact us, email us via info@prodisplay.com or call us on +44 (0)1226 361 306.

Transparent LCD Screens Panels are the latest innovation in LCD technology. These transparent screen are providing a range of new opportunities in retail, marketing, or entertainment displays. With the new transparent LCD display technology, you will be able not only to promote products and show information on a screen, but also being able to see through it.

The transparent screen or transparent monitor, is a see-through display that let the user to see what is shown on the transparent LCD panel while still being able to see the product or items inside the display with the transparent screen.

USB, HDMI & VGA connections are included in the package of transparent screen which allows you to connect a media player, PC or laptop to it. Transparent LCD screens are made to use a video content that shows or hide the physical objects behind the screen. It can be used as a Transparent Display showcase to use in shops or exhibitions or even as a Transparent Screen Fridge or Cooler.

Transparent touch screen technology can be combined with the transparent LCD screens opening a whole new way for retail displays, booths and they are especially useful when it comes to product launches and promotions.

3D Projection Touch Interactive Transparent Touch LCD Display Cabinet advertising machine Custom housings & display cabinets for transparent Touch LCD screens

The transparent screen display cabinet is a transparent screen computer with touch control, it could play video, text through the touch screen, to introduce the full range of information of the built-in items in the way of pictures and pictures, at the same time could protect valuables, could be used for product promotion, cultural relics explanation, valuables propaganda. It has the following characteristics:1. Transparent display cases of 15.6-86 inches can be customized;2. Support interactive 3D model display, touch-sensitive;3. Complimentary CMS content management system, supporting Android and Windows hosts;4. Support remote information release and remote management;5. Built-in WiFi module, SIM card slot, support 4G/5G Internet access in any country.6. Support 2K or 4K resolution.

I get the case it arrives on time, seems to be a returned case judging from the box, which I figured that fine originally they were offered exclusively as IBUYPOWER custom builds. I opened the box everything looks perfect and decided to start building my PC right away. So here is where the story gets interesting.

The inner body where the motherboard sits works as intended however if you are using a hybrid CPU cooler here is where the issues begin. The cooling sections of the box are limited, I was aware of this however what no one seemed to talk about was the fact you could exactly fit a radiator where the fans sit if you have a larger card, ( I have a 3080 look at the pictures ) the card could not fit in its intended position and sit properly with my corsair fans. I said all right no problem and got a side ways mount. I guess they never considered any would want to side ways mount their pc as they didnt leave any proper ports it. Okay still not a problem ill just buy a mounting system (additional 60$ later) Mounting system comes in we are ready to go.

I install this custom mounting system for my oversized GPU, had to customize the back of the case where GPUs mount effectively voiding my warranty I think, and proceed as there was no damage that could be seen on the panel or anything.

All right here is where my true annoyance begins. I successfully installed everything, GPU is running, windows is booted everything is great the LED lights are on in the case showing no damage or anything to the LCD panel and I"m getting to the final moments of seeing the gimmick of this case in action. I get into my computer check my displays and notice the LCD panel is not being detected, all right not an issue I do some google researching here and there and many people complained about the HDMI cord that comes with the case, so I opted to try a different cable and met once again with disappointment the LCD screen driver never connects. I"m also pretty sure I"ve voided my warranty in getting this custom mounting system working so its not like I can RMA it at this point.

So if you are okay with the risk factor of the case get it, it"s pretty to look at even without the LCD but it"s just a regular case with a blurry window for me. Also, be careful if you have larger cards or hyrbid\radiator coolers as they will not fit in the case unless you"re willing to customize it a bit.