psone lcd screen repair supplier

Your PlayStation Portable 1000 LCD Screen Replacement service will be performed while you wait. If you are in the area of DC, Maryland and Northern VA, we welcome you to stop by.

While our trained repair technician will diagnose and repair your device to meet manufacturer"s performance standards, we strive to exceed your expectations in handling the entire process to ensure your total satisfaction.

Note: Additional time may be required on holidays, weekends and / or unforeseen circumstances. Customers will be notified immediately of any change in scheduled completion date. Please back up your data prior to sending in. We will make every attempts to keep your data intact but we are not responsible for any data loss during the repair.

The PSone was announced by Sony on June 8th, 2000. It is about a third of the size of the original Playstation, and is compatible with PlayStation software. To use the PSone, you must have a CD that is compatible with either the Playstation or the PSone in the CD player at the top of the console. You will also need to connect a controller to one of the ports on the front of the console.

This console was released in two formats: the original PSone, and a version with an LCD screen. The LCD screen is set into the circular hatch at the top of the console that was the disk cover in the original version, while the CD player is in the same place, just set slightly deeper in the console than in the original.

The PSone was very successful, even selling better than the newer PlayStation 2 when it was released in 2000. According to PC Data, a market researcher, it accounted for 42% of game console sales one week, far above the rest of the consoles available at the time (the Sega Dreamcast, the Nintendo N64, and the PS2). It was discontinued in 2006, along with the original PlayStation.

These were followed by the SCPH-700x and SCPH-750x series, released in April 1998—they are externally identical to the SCPH-500x machines, but have internal changes made to reduce manufacturing costs (for example, the system RAM went from 4 chips to 1, and the CD controller went from 3 chips to 1) and these were the last models to support parallel port for Gameshark devices and Xploder Pro. In addition, a slight change of the start-up screen was made; the diamond remains unchanged but the font used for Sony Computer and Entertainment is now consistent, making the words appear smaller than the diamond overall, and the trademark symbol (™) is now placed after "Computer Entertainment" instead of after the diamond, as it was on the earlier models. New to the SCPH-700x series was the introduction of the "Sound Scope" – light show music visualizations. These were accessible by pressing the Select button while playing any normal audio CD in the system"s CD player. While watching these visualizations, players could also add various effects like color cycling or motion blur and can save/load their memory card. These were seen on the SCPH-700x, 750x, 900x, and PS one models.

The reason for the two different case colors was a hardware change that Sony had made fairly early in the PlayStation production cycle - the original machines were built using Rev. A (early Japan market units) or Rev. B (later Japan units, US and Europe) hardware, both using the same GPU with VRAM to store the video data. Later models used Rev. C silicon and SGRAM - although the two chipsets had very similar performance, and Rev. C was explicitly designed with compatibility in mind, they were not identical - the Rev. C version was significantly faster at doing alpha blending, and hence the PS "semitransparent" writing mode - it was also rather slow at certain screen memory block moves (basically, ones involving narrow vertical strips of the display) on top of this there were some minor hardware bugs in the older silicon that had been addressed by including workarounds for them in the libraries - the later library versions checked the GPU type at startup time and disabled the patches if they were not needed. Because this made the two machine types quite significantly different from each other, the developer had to test the title on both machines before submitting. The blue debugs (DTL-H100x, DTL-H110x) had the old silicon and the green ones (DTL-H120x) had the new silicon.

The PS One (officially stylized as PS one and alternatively spelled PSOne and PSone) is a smaller, redesigned version of the original PlayStation platform.PlayStation 2.

Sony also released a version with a 5-inch LCD screen and an adaptor (though it did not have a battery: it is powered by plugging the adaptor in a main socket, or in a car). It was called the Combo pack. However, it includes a headphone jack (for headphones or other audio connection) and an AV mini jack for connecting camcorders or other devices.

I started out with a regular Head Rest LCD TV that people use in vehicles. The picture on that was horrible, and you had to convert RGB to Composite to use it, so I needed to find something better. After doing a lot of research, it turns out a lot of people were using the portable LCD screen for the Playstation 1 (PSOne LCD).

Most of the information on the net talks about soldering directly to the LCD PCB, or decasing the monitor and tieing into the harness that"s already there.

The main advantage is, that if the LCD dies for some reason, I can simply replace the LCD with another one, and I won"t have to mod it. It"s about the same amount of work (a little extra removing the extra connector), but the results look a little cleaner. As a bonus, if you"re not using it to repair Arcade Games, you can still use it on the PSOne with out having extra wires or connectors on it.

The only other pins that you need to worry about are pins 5, 8, 9, 11, and 12. In the pictures you will see that I wired up pin 10, but for my LCD screen it wasn"t necessary. In the end I wound up cutting that wire off.

So step 1 is to remove the pass through connector. This is the most painful part since you have to open the lower half of the LCD to get the board out. If you were soldering wires directly to the PCB, you would still need to do this step.

Finally, all parts came together and now the PSone screen has a much more affordable solution to a broken LCD/CCFL. I"ve updated the GitHub wiki with the guide.

If the device you are seeking to repair is a repair service that uBreakiFix provides as an authorized service provider for an original equipment manufacturer, the local competitor must also be an authorized service provider and use original equipment manufacturer parts to repair the device

We reserve the right to verify the price of the identical, in-stock repair components at the retailer location (i.e., size, model, brand, color, spec).